SUBSCRIBE for daily car videos! vid.io/xkQ Toluca Assembly Plant Fiat 500 manufacturing footage
Жүктеу.....
Пікірлер: 210
@williamseitter697911 жыл бұрын
Yep Fiats used to rust badly, but they resolved the problem in the 90's. Completely different car today. They are currently building some really high quality cars.
@daguzify12 жыл бұрын
Purchasing an Abarth next year. Gracias Toluca Viva Leon Cabrones
@enthusiasm18936 күн бұрын
its super fun imagining the fact my Fiat was built in that same factory just a month after this video was filmed!
@abartholomewstallone6499 жыл бұрын
I love my Mexican built Abarth! Gracias! ....YO!
@redminimaniac9 жыл бұрын
I had a 2006 Mini Cooper. It was the biggest piece of crap I ever owned. Had trouble every month I had it. Got rid of it after 6 months of hell. I now have a 2013 Fiat Abarth. It is reliable and not one problem and fun to drive.
@randyw41
7 жыл бұрын
The scary thing about it, is that they're both related to Chrysler. I have a 2012 Fiat Pop. Bought it used, no problems so far, and it's a blast to drive!
@jakp8777
7 жыл бұрын
No, the Mini Cooper had a engine related to the neon engine but everything else was BMW.
@kkddppggbb11 жыл бұрын
viva Toluca, Mexico!!!! ya que aqui se ensamblan!!
@alloret3027 жыл бұрын
I really like my 2013 Abarth. It's had a few issues here and there, but the dealership handled everything under warranty, without so much as a flinch. The car is a blast to drive, both on and off the track. Past Issues with the car: 1.) Needed a reflash of the PROM in the first 5000 mi. (Factory Advisory Bulletin). Took 30min in and out. Car ran even better afterwards. No charge.- Done. 2.) Window mechanism began clicking at the end of full open. That is warning that the cable pulley is going. If you hear it, get it fixed before the thing lets go and necessitates a whole new regulator. They know about the problem, and the dealership should take care of it. It's a quick fix if you catch it before it goes completely, it's fast and easy. 3.) Mine was one of very few that ate its turbo bearing within 5000mi. It was a defective batch of AR turbos. (That's not Fiat's fault.) Dealership handled whole thing- New turbo, intercoolers, and tubing. No charge. Three days, because one tube was back ordered from out of state. No problem since. 4.) Painted panel of sunroof assembly, above the windshield (you can see one being installed in the video above), chipped and peeled. Again, a known problem on the darker cars. Dealership repainted. No charge. Looks perfect. 5.) Chrome plating on some plastic emblems and one door handle bubbled and peeled. What can I say(?), Arizona sun is deadly. Dealership replaced. No charge. 6.) Rear windshield wiper refused to automatically "park" in the down position. Dealership fixed it. Worked for awhile, then resumed need to park it manually by timing the shut-off. I don't care. It almost never flippin' rains here anyway, and even when it does, I don't use the rear wiper. The car has no rattles. There is a small amount of torque steer only under hard acceleration, but it is very slight. As the cabin seals have dried slightly over time, there has been some mild increase in wind noise, but, as I said, AZ sun is deadly. Things that could be better(IMHO)- 1.) I wish that the car had a manual 6 speed option with a higher overdrive. AZ interstates are high-speed for loooong distances, and I hate doing 3500-3800 RPM continuously for hours on end when it's simply not necessary. 2.) The 10 gal gas tank is too small. The car should have a range of at least 350 miles. It gets ~28mpg at interstate speed. Would it have broken their hearts to have installed a 12.5 - 13 gal. tank, which would have provided that range? C'mon, Fiat! That little tank might work for the POP, but the Abarth is a bit hungrier. The package should've included a bigger plate for a larger meal. 3.) Yes. The Beats stereo kinda sucks. It's an overly bassy POS, with poor mid and high-range clarity and Dr. Dre should be ashamed of himself for putting his name on it. All of that said- It has always started and driven, even when the turbo went. Completely dependable and a really fun daily driver. Love the car.
@stigonutube
7 жыл бұрын
Thanks for the run down, helps others a lot..besides the turbo and reflash looks like not much else could sit you on the side of the road yelling SHITBOX Lemon..so you have the Diesel model?
@gl_tonight5 жыл бұрын
love my 500 turbo. fun car. destroyed the oil cooler somehow but it was -20 out lots of respect to the peeps making these along side the robots. much respect to the programmers of the robots.
@Pinachina7 жыл бұрын
Look at all of those beautiful cars!
@nismokid25339 жыл бұрын
My Abarth is Mexican hehe.. Nice work muchachos.! Gracias from Chicago.
@joeb2588
7 жыл бұрын
An Italian car made in Mexico. The end of times is near. I like the car but it's not reliable. Not good to assemble there. I'm convinced that's part of the problem.
@BARON.SAMEDI.
7 жыл бұрын
Nismo Kid ...and mine is the better version!!! My European Abarth Competizione 2017 Facelift ist the real deal, couse there are way more changes as by the US ( made in Mexico) version!!!
@BARON.SAMEDI.
7 жыл бұрын
joe b ... Nonsense ! The Fiats was not reliable back in the 70_80_90s...but today they simple have no problems. I speak about the European version!!! Over here in Germany we have way more problems with the big names like Mercedes or Audi. Belive or not...but it's true. I experienced it!! So you are the topical person with stereotype ..who still believes that the Fiat is not realible. Come over her to Germany to collect some experience and knowledge about the cars who became,...and lost their reliability.
@BARON.SAMEDI.
7 жыл бұрын
joe b ... Nonsense ! The Fiats was not reliable back in the 70_80_90s...but today they simple have no problems. I speak about the European version!!! Over here in Germany we have way more problems with the big names like Mercedes or Audi. Belive or not...but it's true. I experienced it!! So you are the topical person with stereotype ..who still believes that the Fiat is not realible. Come over her to Germany to collect some experience and knowledge about the cars who became,...and lost their reliability.
@crist67mustang6 жыл бұрын
My VW Beetle 2015 also is Mexican. Nice work, chiquillos. Gracias from Santiago CL
@TinyScorpion4411 жыл бұрын
Gracias a la gente de la fabrica para hacer mi pequeno coche impresionante.
@daguzify10 жыл бұрын
Just purchased an Abarth...Gracias Toluca, Mexico.
@Sanpedranoazul13 жыл бұрын
No sabia que ensamblaban en Mexico, Buen trabajo!!!
@guido7613 жыл бұрын
Realmente es muy bello ver una linea de fabricación de autos. En particular, es imposible no admirar al chiquitin de FIAT. Es un muy lindo y buen modelo. Soy de Argentina, aqui no se fabrica lamentablemente, pero lo he probado y realmente me ha sorprendido. Es un auto compacto, fuerte pero comodo, se le nota robusto al andar, y al mismo tiempo muy confortable por el tamaño y peso que tiene. Felicitaciones a los amigos de Mejico. Tienen una muy buena planta allá. Saludos y muy buen material !
@bobchristensen87792 жыл бұрын
2017 Abarth 500 You built me a great one!!. Wisconsin,United States of America.
@23Darkio12 жыл бұрын
The Sebring is made in Stearling Heights, In touca made the Dodge Journey. But both plants are very similar, SH is a little bit more autmatizated.
@tubabluba11 жыл бұрын
I have one, and Im really happy about it. its a impressive Car!!!
@kendrickjadiel7664
3 жыл бұрын
Dunno if you guys cares but if you are stoned like me during the covid times you can stream pretty much all of the new movies on instaflixxer. Have been watching with my girlfriend recently :)
@xzavierdean7822
3 жыл бұрын
@Kendrick Jadiel yea, have been using Instaflixxer for years myself :D
@raymondward48447 жыл бұрын
I love all these car factories.
@bigcrowfly13 жыл бұрын
Notice, this is where they also make the Dodge Journey (also the Fiat Fremont). Can see them in many places in this film. They used to make the PT Cruiser here too.
@raube7912 жыл бұрын
Nací en Toluca, México, Estoy orgulloso de decir que la manufactura mexicana rebasa en calidad a muchas de europa y E.U. y México no esta en sudamerica, estamos en Norteamerica por aquellos que no han estudiado geografía. Soy orgullosamente Mexicano y Toluqueño, Saludos!
@bestfrogs24712 жыл бұрын
Thank you for posting "Toluca Assembly Plant Fiat 500 manufacturing footage."
@guillermoperez27506 жыл бұрын
Impresionante, no me lo esperaba. Bien por México!
@alessiovigna786511 жыл бұрын
As Endi correctly said, Toluca produces also the Journey/Freemont. And yes, basically all the 500 versions with the American specs are made in Toluca, while for Europe they are made in Tychy, Poland.
@derargentinier88793 жыл бұрын
estan muy bien hechos estos fiat 500 ! son buenos autos
@urimendez951011 жыл бұрын
Ahora se como se hizo mi Fiat 500, increible todo este proceso de ensamblaje
@heybulldog1379 жыл бұрын
Hell of a difference between working in the plant, and designing the plant and workstations.
@Waltkat2 жыл бұрын
Late to the party but I've had my used 2013 500 turbo for only a few months now and loving it. One of the best cars I've ever bought. It is sooo fun to drive with it's turbo and 5-speed manual. A 6-speed would have been nice though. Too bad Fiat decided to stop making these fun little cars.
@tonykt11 жыл бұрын
coolest car ever!
@silverioosorno76109 жыл бұрын
08:38 - 08:51 PLANTA ENSAMBLE: Instalación de asientos, montados por herramientas diseñadas para la operación. Se encuentra en línea final de Planta Ensamble.
@silverioosorno76109 жыл бұрын
09:27 - 09:47 PLANTA ENSAMBLE: Prueba de Carretera. Estas son las últimas pruebas que se realizan al vehículo, para revisar todo el funcionamiento y prestaciones del mismo; simulando las condiciones que se presentan en carretera. Si existe un demérito, se le crea un “HOLD“ al vehículo para su revisión total. Si el Vehículo, pasa todas las pruebas, se lleva a Patio de Ventas, y de ahí a su distribución Nacional e Internacional. Ing. Silverio Osorno
@scotianbank10 жыл бұрын
I know these cars aren't exactly "top-notch" but I think that for their price range they are pretty good AND most of all, good looking! ;)
@silverioosorno76109 жыл бұрын
08:07 - 08:17 PLANTA ENSAMBLE: Instalación de facias: Delantera y trasera. Esta operación se encuentra a mitad de Planta Ensamble.
@dianaliebenberg16762 жыл бұрын
Amazing!! Would love to be there and experience the process from A-Z
@silverioosorno76109 жыл бұрын
08:52 - 09:15 PLANTA ENSAMBLE: Operación prueba de agua. Se encuentra en patios exteriores de Planta Ensamble.
@moralesesau
7 жыл бұрын
Silverio Osorno Falto el proceso de pintura no?
@silverioosorno7610
7 жыл бұрын
¡ Hooolaaa uriel morales !, - Es correcto -, a pesar que en este mismo video, no tuvieron acceso a Planta Pintura, - Quizá por las políticas de contaminación, ya que ahí si son muy estrictas - . Te comento: 1.- Después de haber salido al unidad VIN ( por su siglas en Inglés : Vehicle Identification Number ), del área de carrocerias, pasa por las tinas de tratamiento de metal ( no recuerdo el nombre la sustancia química ). 2.- De ahí se hace un proceso de Electro-Pintura o bien por electrólisis, aun la unidad sumergida, para que ésta, adquiera los iones negativos, para cuando pase por las campanas ( robots de pintura ), se adhieran de negativos a positivos los iones , - de esta manera esta garantizada la pintura de los 7 años que te da FIAT-Chrysler -. De aqui se va a los hornos de pintura. Después de este proceso, baja a Planta Ensamble. 3.- Desde luego antes de las " Campanas ", pasa por varios procesos de adherencia de E-colant, Primer o Pintura Base, Color o pintura Secundaria, Pintura transparente. La pintura generalmente era PPG para tratamiento en hornos de pintura. Nota : * Los procesos están en continuo cambio, - Esto es mejora continua -, así que es posiblemente hayan cambiado algunos puntos o incluso muchos de ellos. * Si has o estés trabajando ahí es posible que sepas el proceso del WCM. * si no, en breve haré una web del proceso WCM, aplicado en la industria de la Transformación. ¡ Excelente día, y gracias por preguntar ! Silverio Osorno Disciplina : Orden. Limpieza y Puntualidad.
@dulcesychocolates11 жыл бұрын
Felicidades a todos los obreros que hacen posible el trabajo :)
@silverioosorno76109 жыл бұрын
08:18 - 08:37 PLANTA ENSAMBLE: Instalación de birlos, a través de la multiple de llantas. Esta operación se encuentra a mitad de Planta Ensamble.
@eduardobether46929 жыл бұрын
la verdad que como dueño de un 500 puedo decir que la mano de obra mexicana 10 puntos!!ojala argentina mejore asi sus productos!!
@alessiovigna786511 жыл бұрын
It's around 7,000 people all over Mexico. Unfortunately (or luckily) automotive plants are now always below a maximum of 4-5k workers. A 6,000 plant is considered huge nowadays
@eggman02918 жыл бұрын
Un sujeto del trabajo nos presumia de su fiat 500 cuando se lo entregaron y no me creyó que los ensamblaban aquí en México, creía que era 100% importado de Italia como un Ferrari o algo así.
@fernandoavila8011
7 жыл бұрын
Los primeros si eran traidos de Italia yo tenia uno y tenia una insignia que decia hecho en italia. La diferencia que tienen los de este video es que son de mejor calidad los fabricados en Toluca. ;)
@Pablofunk017
7 жыл бұрын
Eggman ese modelo acá en Chile los traen desde Italia... hasta el modelo es italiano.. los que fabrican en Toluca son para México, USA y Canadá.. saludos
@superabed13 жыл бұрын
5:00 They use the same assembling platforms for the Freemont!:)
@silverioosorno76109 жыл бұрын
07:32 - 08:02 PLANTA ENSAMBLE: Área de rodillos, para la calibración de todo el sistema eléctrico y electrónico del vehículo. Sin esta prueba el carro no puede salir de planta. Esta operación se encuentra a en línea final.
@alessiovigna786511 жыл бұрын
It's Toluca, Mexico. But, for instance, this is the standard also in Europe: glasses are mandatory just for some activities.
@robsrandomness78247 жыл бұрын
I wonder how many 500s come out of that huge roll of metal.
@krwilliams387612 жыл бұрын
Yup, and its' FIAT-branded twin cousin, the Freemont!
@SebastianvonGrunf13 жыл бұрын
I didn't know that there is such a diference between production standarsds for us and eu market. There is also footage of Fiat 500 assemby line in europe (tichy, poland) on you tube. Check it out and find out why (vissualy) same cars cost a lot more in europe then in us.
@silverioosorno76109 жыл бұрын
09:16 - 09:26 PLANTA ENSAMBLE: Área de auditorías. Aquí se pegan las etiquetas de Seguridad: Inflado de las llantas, Del uso de los cinturones de seguridad, Si el vehículo será Doméstico o de Exportación, así como varias etiquetas de aduanas. Después de esta operación se va a Prueba de Carretera.
@thanhnhanguyen1368
8 жыл бұрын
E
@stefano66913 жыл бұрын
Sono contento della Fiat 500 made in Italia bella veramnte!!!
@alessiovigna786511 жыл бұрын
No the VW Beetle was made in a VW plant. More precisely the assembly was made (and is still made if we speak about the new model) in Puebla
@maru_aska4 ай бұрын
いつ見ても美しい車
@JuanGonzales-zq2fh2 жыл бұрын
El grande Fiat 500!
@Baraquiel6212 жыл бұрын
Hi there greetings from Mexico
@goprodan12 жыл бұрын
@70noipmahc the 500 was initially made in POLAND.
@alessiovigna786512 жыл бұрын
Wow, you must be a really original and funny person
@silverioosorno76109 жыл бұрын
07:30 - 07:31 PLANTA ENSAMBLE: Revisión de suspensión en Línea Final.
@donMurgero12 жыл бұрын
maldito carro...cada vez lo veo lo quiero...y ahora que lo veo desde su concepción lo quiero mas! fucking car....always see i want it....and now i saw from the bigginig i want it more!
@kurko36011 жыл бұрын
Y vamos por el fiat electrico.....100% manofactura Toluqueña
@marylandrcboatmarina11 жыл бұрын
Matt, I noticed Dodge Journeys and Fiat Freemonts (pretty much the same car with different engines and different badges).
@highzed12 жыл бұрын
@70noipmahc Wait, this is Factory Plant just for North American market. To lower costs production is in the Chrysler Factory in Mexico. But if you buy a Fiat 500 in Europe it is Made in Italy.
@currysteph12 жыл бұрын
No I live in the US...Houston....I guess I need to change my status...I did use to live in Poland....but Im buying my Abarth 500 from Northside Fiat in the Woodlands, Texas. After all is said and done it'll be around $28K...then Im having some aftermarket stuff done to it
@discomscorpions7 жыл бұрын
un trabajo admirable amigos de fiat sobretodo por dar trabajo a hermanos mexicanos tristemente todo esto lo echan a perder nuestros gobiernos llenos de corrupción y porquerías en los gobiernos mexicanos los admiro amigos de fiat
@alessiovigna786511 жыл бұрын
That's curious, because, in reality, here we spend 50% of the time trying to solve electronic problems on Thema and Freemont ;-). Anyway, you are right all 500 versions (including Abarth) are made in Poland for EU and in Mexico for NA
@JeffDodgejeffdodgedesigns11 жыл бұрын
They are selling like crazy here.. just got one myself!
@nsmsam10 жыл бұрын
I have my Abarth for a year. The interior has a lot of rattles. Almost everyone experiences driver side window rattles. Dealer helps us fix it by adding lubricant at weather seal. Problem comes back in one week. My blower fan motor whining very noisy starting 7k miles. I will recommend the car to friends is don't like.
@samchisolm8713
7 жыл бұрын
2013 Griso with everything...58k...tight as a drum...no similar problems reported by ANYONE in my club...so much for "almost everyone".
@berniediapersanderslukso9204
7 жыл бұрын
nsmsam , all cars will develop rattles but they are very easy to fix. I had a camry before and within six months was creaking and rattling. Because friction between plastics and between metal and plastic cause these perceived rattles. They are very easy to fix. Just get yourself a can of spray that the use for motorhomes to remove friction from sliding parts like sliding doors or windows. It works great. Spray some on the door seals, hinges, window channels, door panels where thr panels come in contact with the door. You dont have to use a lot. You will be amazed how quiet the car becomes when you eliminate creaks and rattles.
@jakp8777
7 жыл бұрын
A Toyota with problems? Impossible! Must be the suppliers issue.
@10rrafael12 жыл бұрын
Hola a todos, tengo una duda que ojalá puedan aclarar; en este video noté que el FIAT 500 ensamblado en Toluca, tiene una "lupa" en los faros, sin embargo, al preguntar en la agencia me informan que todas las versiones cuentan con faros de halógeno sencillos sin la "lupa", esto a pesar de que en sus catalogos y pag. Web las fotos del vehículo aparecen con la "lupa"; mi pregunta es: porqué en méxico no venden la unidad con las lupas en los faros??? Gracias.
@2024maurizio6 жыл бұрын
Bella macchina FIAT 500
@gonzalez41237 жыл бұрын
At 6:47 the pole in the middle with the green color in the middle kind of looks like a vaping pen
@momozim111 жыл бұрын
yo trabajo dentro de la planta por eso lo se !!
@momozim111 жыл бұрын
el abarth también es hecho aquí !!
@Hiei2k712 жыл бұрын
There's a few. A large dealer in Fayetteville AR sells Fiats. Number will probably increase as Fiat puts their mark on Chrysler.
@miguediaz38822 жыл бұрын
Solo sacan lo mejorcito de la producción y los pobres obreros ni sus luces. Pero bueno
@ulbiciohuici64014 жыл бұрын
I have the fiat sport 500 2015 and I love it ... the only problem I have is the antenna and a part that is mounted on the bodywork but is part of the drawing of the window ... the rubber falls apart ... I have already had than change it twice ...😔
@peejay195411 жыл бұрын
Having been a Fiat parts manager in 1979 and seeing first hand how the D.O.T. forced Fiat to buy back all of the 850's sold in the USA and the laughable way Fiat N.A. handled their warranty claims (they didn't). I would like to see some re-assurance regarding rust & warranty issues as to how they are addressing this concern to those of us with long memories. What techniques are they using and what recalls have been issued so far.
@Alldongguanmanufacturers7 жыл бұрын
We could see some fixture for the assembling line.
@guillermoperez2750
6 жыл бұрын
赵银祥 , 😂 I think I know what you mean...TEAM WORK!!!!
@JuanGonzales-zq2fh2 жыл бұрын
Fiat 500 bello!
@TechFreak5112 жыл бұрын
3:42 .. wow .. what a precision it should be !!!!
@currysteph12 жыл бұрын
Engine is 1.4 Turbo...160hp from the factory....as far as it being worth buying...that's an individual thing...I don't need a large vehicle and so I wanted something to whip around town in....its a great car and really peppy. It one of the fast 0-60 cars in and out of its class. stupid ass you tube wont let me post the link to the 0-60 comparisons
@farmingsimguysthefarmingte61506 жыл бұрын
My mum loves her fiat stilo abarth it’s 2004
@viviendoen1laberinto7 жыл бұрын
Muy bonito el cochesito este pero ya me imagino los bajo de los salarios...
@MooMofo8 жыл бұрын
Looking at how much they're driven in the plant I'm beginning to think I was the only one to test drive my Abarth. Odometer had 4 miles on it when I drove it off the lot.
@dalepinney5001
3 жыл бұрын
Interesting you say that when you bought it did it still have the h next to the mileometer if it didn't then it had been put back to zero before you had it The car can do 99 miles on the h and still be returned to zero with the menu function on the right stalk as long as it hasn't gone over 100
@MrDiegonchas12 жыл бұрын
@10rrafael tengo la misma pregunta!
@loufadoros2013 жыл бұрын
@mrtecno99 i am thinkin about the same thing!!!! u weren't conveinced that the production's methods used in this vid below isenough!!!This is a link for the production of the Europenean version.
@1616Wildcat11 жыл бұрын
Fiat is moving Fiat 500 production to Poland from Mexico. I forgot what vehicle will replace the 500 in Mexico but there are supposed to be no job cuts.
@sirkingjamz10112 жыл бұрын
thats the dodge Journey thats being built along side the 500
@alessiovigna786511 жыл бұрын
Concordo nettamente con le tue considerazioni. Aggiungerei: Toluca nemmeno è un impianto su cui si è dovuto intervenire con investimenti elevatissimi. La fabbrica esiste dal 78, ed era in perfetto ordine quando è entrata nell'orbita Fiat con Chrysler
@Tsagami8 жыл бұрын
They use double galvanized 22μm steel!
@buildmorefarms1007
7 жыл бұрын
Is that god or bad?
@krwilliams3876
6 жыл бұрын
Good!
@alexthelargue30898 жыл бұрын
MUY CARO EL VEHICULO, Y ADEMAS ES PANERO ELECTRICO
@gerardosalas9477
8 жыл бұрын
Que es panero?
@iachi7312 жыл бұрын
Cosi per curiosità, ma e un impianto di proprietà Crysler? oppure proprio della fiat, lo chiedo perchè non sapevo avesse un impianto pure in Messico.
@Gavichap12 жыл бұрын
Guarda che proprio la 500 non è fabbricata in Italia, ma in Polonia (a Tychy). Questa è la fabbrica di Toluca, Messico, per i modelli venduti nelle Americhe.
@bmwmsport1111 жыл бұрын
Nice to know. The first Italian car that ISN'T hand built lol
@mcp1230010 жыл бұрын
3:40 O.O They've captured a transformer
@dulcesychocolates
9 жыл бұрын
This cell works with around 14 robots, one of the most exiting point in the process
@cristiangalicia6711 жыл бұрын
Lo echo en méxico esta biieen echo
@Gian7083 жыл бұрын
Fiat 500 😍💖
@highzed12 жыл бұрын
I checked, and you're right. What else can I say ... Sad!
@alessiovigna786511 жыл бұрын
Sorry Todd, but where did you read this? The 500 is already produced in Poland, but the two cars have different specs. Why should Fiat make them in Poland and then ship them across the atlantic ocean? I mean, we would be very happy here in Europe, but it doesn't make much sense
@Gavichap12 жыл бұрын
They used to be junk, but nowadays they are miles better. Still not perfect, though, but a thousand million times better than in the ol' dark days.
@plusismaelenrique12 жыл бұрын
I live in the 14 km road to Toluca, then I live near this plant.
@migradsg8811 жыл бұрын
awuevo industria toluqueña...
@kolbpilot3 жыл бұрын
Since I own one now (used '12 Sport), I've read up on 'em. The North American version gets its parts from 80% different vendors vs. the Poland version. We know where the engine comes from but I always wondered about the five speed transmission ? Assembled in Toluca at the plant ? Shipped from Poland ? Shipped from Italy ?
@mr2981
Жыл бұрын
Transmission is from Italy, says so on my old window sticker.
@kolbpilot
Жыл бұрын
@@mr2981 : Thanks. Mine works well.
@currysteph12 жыл бұрын
tell me about it....I have a 91 Dodge Shadow Convertible that Ive restored with a 2.5 turbo which was the last car that I bought new and prices have really jumped...no wonder loans are for 5 years or more now
Пікірлер: 210
Yep Fiats used to rust badly, but they resolved the problem in the 90's. Completely different car today. They are currently building some really high quality cars.
Purchasing an Abarth next year. Gracias Toluca Viva Leon Cabrones
its super fun imagining the fact my Fiat was built in that same factory just a month after this video was filmed!
I love my Mexican built Abarth! Gracias! ....YO!
I had a 2006 Mini Cooper. It was the biggest piece of crap I ever owned. Had trouble every month I had it. Got rid of it after 6 months of hell. I now have a 2013 Fiat Abarth. It is reliable and not one problem and fun to drive.
@randyw41
7 жыл бұрын
The scary thing about it, is that they're both related to Chrysler. I have a 2012 Fiat Pop. Bought it used, no problems so far, and it's a blast to drive!
@jakp8777
7 жыл бұрын
No, the Mini Cooper had a engine related to the neon engine but everything else was BMW.
viva Toluca, Mexico!!!! ya que aqui se ensamblan!!
I really like my 2013 Abarth. It's had a few issues here and there, but the dealership handled everything under warranty, without so much as a flinch. The car is a blast to drive, both on and off the track. Past Issues with the car: 1.) Needed a reflash of the PROM in the first 5000 mi. (Factory Advisory Bulletin). Took 30min in and out. Car ran even better afterwards. No charge.- Done. 2.) Window mechanism began clicking at the end of full open. That is warning that the cable pulley is going. If you hear it, get it fixed before the thing lets go and necessitates a whole new regulator. They know about the problem, and the dealership should take care of it. It's a quick fix if you catch it before it goes completely, it's fast and easy. 3.) Mine was one of very few that ate its turbo bearing within 5000mi. It was a defective batch of AR turbos. (That's not Fiat's fault.) Dealership handled whole thing- New turbo, intercoolers, and tubing. No charge. Three days, because one tube was back ordered from out of state. No problem since. 4.) Painted panel of sunroof assembly, above the windshield (you can see one being installed in the video above), chipped and peeled. Again, a known problem on the darker cars. Dealership repainted. No charge. Looks perfect. 5.) Chrome plating on some plastic emblems and one door handle bubbled and peeled. What can I say(?), Arizona sun is deadly. Dealership replaced. No charge. 6.) Rear windshield wiper refused to automatically "park" in the down position. Dealership fixed it. Worked for awhile, then resumed need to park it manually by timing the shut-off. I don't care. It almost never flippin' rains here anyway, and even when it does, I don't use the rear wiper. The car has no rattles. There is a small amount of torque steer only under hard acceleration, but it is very slight. As the cabin seals have dried slightly over time, there has been some mild increase in wind noise, but, as I said, AZ sun is deadly. Things that could be better(IMHO)- 1.) I wish that the car had a manual 6 speed option with a higher overdrive. AZ interstates are high-speed for loooong distances, and I hate doing 3500-3800 RPM continuously for hours on end when it's simply not necessary. 2.) The 10 gal gas tank is too small. The car should have a range of at least 350 miles. It gets ~28mpg at interstate speed. Would it have broken their hearts to have installed a 12.5 - 13 gal. tank, which would have provided that range? C'mon, Fiat! That little tank might work for the POP, but the Abarth is a bit hungrier. The package should've included a bigger plate for a larger meal. 3.) Yes. The Beats stereo kinda sucks. It's an overly bassy POS, with poor mid and high-range clarity and Dr. Dre should be ashamed of himself for putting his name on it. All of that said- It has always started and driven, even when the turbo went. Completely dependable and a really fun daily driver. Love the car.
@stigonutube
7 жыл бұрын
Thanks for the run down, helps others a lot..besides the turbo and reflash looks like not much else could sit you on the side of the road yelling SHITBOX Lemon..so you have the Diesel model?
love my 500 turbo. fun car. destroyed the oil cooler somehow but it was -20 out lots of respect to the peeps making these along side the robots. much respect to the programmers of the robots.
Look at all of those beautiful cars!
My Abarth is Mexican hehe.. Nice work muchachos.! Gracias from Chicago.
@joeb2588
7 жыл бұрын
An Italian car made in Mexico. The end of times is near. I like the car but it's not reliable. Not good to assemble there. I'm convinced that's part of the problem.
@BARON.SAMEDI.
7 жыл бұрын
Nismo Kid ...and mine is the better version!!! My European Abarth Competizione 2017 Facelift ist the real deal, couse there are way more changes as by the US ( made in Mexico) version!!!
@BARON.SAMEDI.
7 жыл бұрын
joe b ... Nonsense ! The Fiats was not reliable back in the 70_80_90s...but today they simple have no problems. I speak about the European version!!! Over here in Germany we have way more problems with the big names like Mercedes or Audi. Belive or not...but it's true. I experienced it!! So you are the topical person with stereotype ..who still believes that the Fiat is not realible. Come over her to Germany to collect some experience and knowledge about the cars who became,...and lost their reliability.
@BARON.SAMEDI.
7 жыл бұрын
joe b ... Nonsense ! The Fiats was not reliable back in the 70_80_90s...but today they simple have no problems. I speak about the European version!!! Over here in Germany we have way more problems with the big names like Mercedes or Audi. Belive or not...but it's true. I experienced it!! So you are the topical person with stereotype ..who still believes that the Fiat is not realible. Come over her to Germany to collect some experience and knowledge about the cars who became,...and lost their reliability.
My VW Beetle 2015 also is Mexican. Nice work, chiquillos. Gracias from Santiago CL
Gracias a la gente de la fabrica para hacer mi pequeno coche impresionante.
Just purchased an Abarth...Gracias Toluca, Mexico.
No sabia que ensamblaban en Mexico, Buen trabajo!!!
Realmente es muy bello ver una linea de fabricación de autos. En particular, es imposible no admirar al chiquitin de FIAT. Es un muy lindo y buen modelo. Soy de Argentina, aqui no se fabrica lamentablemente, pero lo he probado y realmente me ha sorprendido. Es un auto compacto, fuerte pero comodo, se le nota robusto al andar, y al mismo tiempo muy confortable por el tamaño y peso que tiene. Felicitaciones a los amigos de Mejico. Tienen una muy buena planta allá. Saludos y muy buen material !
2017 Abarth 500 You built me a great one!!. Wisconsin,United States of America.
The Sebring is made in Stearling Heights, In touca made the Dodge Journey. But both plants are very similar, SH is a little bit more autmatizated.
I have one, and Im really happy about it. its a impressive Car!!!
@kendrickjadiel7664
3 жыл бұрын
Dunno if you guys cares but if you are stoned like me during the covid times you can stream pretty much all of the new movies on instaflixxer. Have been watching with my girlfriend recently :)
@xzavierdean7822
3 жыл бұрын
@Kendrick Jadiel yea, have been using Instaflixxer for years myself :D
I love all these car factories.
Notice, this is where they also make the Dodge Journey (also the Fiat Fremont). Can see them in many places in this film. They used to make the PT Cruiser here too.
Nací en Toluca, México, Estoy orgulloso de decir que la manufactura mexicana rebasa en calidad a muchas de europa y E.U. y México no esta en sudamerica, estamos en Norteamerica por aquellos que no han estudiado geografía. Soy orgullosamente Mexicano y Toluqueño, Saludos!
Thank you for posting "Toluca Assembly Plant Fiat 500 manufacturing footage."
Impresionante, no me lo esperaba. Bien por México!
As Endi correctly said, Toluca produces also the Journey/Freemont. And yes, basically all the 500 versions with the American specs are made in Toluca, while for Europe they are made in Tychy, Poland.
estan muy bien hechos estos fiat 500 ! son buenos autos
Ahora se como se hizo mi Fiat 500, increible todo este proceso de ensamblaje
Hell of a difference between working in the plant, and designing the plant and workstations.
Late to the party but I've had my used 2013 500 turbo for only a few months now and loving it. One of the best cars I've ever bought. It is sooo fun to drive with it's turbo and 5-speed manual. A 6-speed would have been nice though. Too bad Fiat decided to stop making these fun little cars.
coolest car ever!
08:38 - 08:51 PLANTA ENSAMBLE: Instalación de asientos, montados por herramientas diseñadas para la operación. Se encuentra en línea final de Planta Ensamble.
09:27 - 09:47 PLANTA ENSAMBLE: Prueba de Carretera. Estas son las últimas pruebas que se realizan al vehículo, para revisar todo el funcionamiento y prestaciones del mismo; simulando las condiciones que se presentan en carretera. Si existe un demérito, se le crea un “HOLD“ al vehículo para su revisión total. Si el Vehículo, pasa todas las pruebas, se lleva a Patio de Ventas, y de ahí a su distribución Nacional e Internacional. Ing. Silverio Osorno
I know these cars aren't exactly "top-notch" but I think that for their price range they are pretty good AND most of all, good looking! ;)
08:07 - 08:17 PLANTA ENSAMBLE: Instalación de facias: Delantera y trasera. Esta operación se encuentra a mitad de Planta Ensamble.
Amazing!! Would love to be there and experience the process from A-Z
08:52 - 09:15 PLANTA ENSAMBLE: Operación prueba de agua. Se encuentra en patios exteriores de Planta Ensamble.
@moralesesau
7 жыл бұрын
Silverio Osorno Falto el proceso de pintura no?
@silverioosorno7610
7 жыл бұрын
¡ Hooolaaa uriel morales !, - Es correcto -, a pesar que en este mismo video, no tuvieron acceso a Planta Pintura, - Quizá por las políticas de contaminación, ya que ahí si son muy estrictas - . Te comento: 1.- Después de haber salido al unidad VIN ( por su siglas en Inglés : Vehicle Identification Number ), del área de carrocerias, pasa por las tinas de tratamiento de metal ( no recuerdo el nombre la sustancia química ). 2.- De ahí se hace un proceso de Electro-Pintura o bien por electrólisis, aun la unidad sumergida, para que ésta, adquiera los iones negativos, para cuando pase por las campanas ( robots de pintura ), se adhieran de negativos a positivos los iones , - de esta manera esta garantizada la pintura de los 7 años que te da FIAT-Chrysler -. De aqui se va a los hornos de pintura. Después de este proceso, baja a Planta Ensamble. 3.- Desde luego antes de las " Campanas ", pasa por varios procesos de adherencia de E-colant, Primer o Pintura Base, Color o pintura Secundaria, Pintura transparente. La pintura generalmente era PPG para tratamiento en hornos de pintura. Nota : * Los procesos están en continuo cambio, - Esto es mejora continua -, así que es posiblemente hayan cambiado algunos puntos o incluso muchos de ellos. * Si has o estés trabajando ahí es posible que sepas el proceso del WCM. * si no, en breve haré una web del proceso WCM, aplicado en la industria de la Transformación. ¡ Excelente día, y gracias por preguntar ! Silverio Osorno Disciplina : Orden. Limpieza y Puntualidad.
Felicidades a todos los obreros que hacen posible el trabajo :)
08:18 - 08:37 PLANTA ENSAMBLE: Instalación de birlos, a través de la multiple de llantas. Esta operación se encuentra a mitad de Planta Ensamble.
la verdad que como dueño de un 500 puedo decir que la mano de obra mexicana 10 puntos!!ojala argentina mejore asi sus productos!!
It's around 7,000 people all over Mexico. Unfortunately (or luckily) automotive plants are now always below a maximum of 4-5k workers. A 6,000 plant is considered huge nowadays
Un sujeto del trabajo nos presumia de su fiat 500 cuando se lo entregaron y no me creyó que los ensamblaban aquí en México, creía que era 100% importado de Italia como un Ferrari o algo así.
@fernandoavila8011
7 жыл бұрын
Los primeros si eran traidos de Italia yo tenia uno y tenia una insignia que decia hecho en italia. La diferencia que tienen los de este video es que son de mejor calidad los fabricados en Toluca. ;)
@Pablofunk017
7 жыл бұрын
Eggman ese modelo acá en Chile los traen desde Italia... hasta el modelo es italiano.. los que fabrican en Toluca son para México, USA y Canadá.. saludos
5:00 They use the same assembling platforms for the Freemont!:)
07:32 - 08:02 PLANTA ENSAMBLE: Área de rodillos, para la calibración de todo el sistema eléctrico y electrónico del vehículo. Sin esta prueba el carro no puede salir de planta. Esta operación se encuentra a en línea final.
It's Toluca, Mexico. But, for instance, this is the standard also in Europe: glasses are mandatory just for some activities.
I wonder how many 500s come out of that huge roll of metal.
Yup, and its' FIAT-branded twin cousin, the Freemont!
I didn't know that there is such a diference between production standarsds for us and eu market. There is also footage of Fiat 500 assemby line in europe (tichy, poland) on you tube. Check it out and find out why (vissualy) same cars cost a lot more in europe then in us.
09:16 - 09:26 PLANTA ENSAMBLE: Área de auditorías. Aquí se pegan las etiquetas de Seguridad: Inflado de las llantas, Del uso de los cinturones de seguridad, Si el vehículo será Doméstico o de Exportación, así como varias etiquetas de aduanas. Después de esta operación se va a Prueba de Carretera.
@thanhnhanguyen1368
8 жыл бұрын
E
Sono contento della Fiat 500 made in Italia bella veramnte!!!
No the VW Beetle was made in a VW plant. More precisely the assembly was made (and is still made if we speak about the new model) in Puebla
いつ見ても美しい車
El grande Fiat 500!
Hi there greetings from Mexico
@70noipmahc the 500 was initially made in POLAND.
Wow, you must be a really original and funny person
07:30 - 07:31 PLANTA ENSAMBLE: Revisión de suspensión en Línea Final.
maldito carro...cada vez lo veo lo quiero...y ahora que lo veo desde su concepción lo quiero mas! fucking car....always see i want it....and now i saw from the bigginig i want it more!
Y vamos por el fiat electrico.....100% manofactura Toluqueña
Matt, I noticed Dodge Journeys and Fiat Freemonts (pretty much the same car with different engines and different badges).
@70noipmahc Wait, this is Factory Plant just for North American market. To lower costs production is in the Chrysler Factory in Mexico. But if you buy a Fiat 500 in Europe it is Made in Italy.
No I live in the US...Houston....I guess I need to change my status...I did use to live in Poland....but Im buying my Abarth 500 from Northside Fiat in the Woodlands, Texas. After all is said and done it'll be around $28K...then Im having some aftermarket stuff done to it
un trabajo admirable amigos de fiat sobretodo por dar trabajo a hermanos mexicanos tristemente todo esto lo echan a perder nuestros gobiernos llenos de corrupción y porquerías en los gobiernos mexicanos los admiro amigos de fiat
That's curious, because, in reality, here we spend 50% of the time trying to solve electronic problems on Thema and Freemont ;-). Anyway, you are right all 500 versions (including Abarth) are made in Poland for EU and in Mexico for NA
They are selling like crazy here.. just got one myself!
I have my Abarth for a year. The interior has a lot of rattles. Almost everyone experiences driver side window rattles. Dealer helps us fix it by adding lubricant at weather seal. Problem comes back in one week. My blower fan motor whining very noisy starting 7k miles. I will recommend the car to friends is don't like.
@samchisolm8713
7 жыл бұрын
2013 Griso with everything...58k...tight as a drum...no similar problems reported by ANYONE in my club...so much for "almost everyone".
@berniediapersanderslukso9204
7 жыл бұрын
nsmsam , all cars will develop rattles but they are very easy to fix. I had a camry before and within six months was creaking and rattling. Because friction between plastics and between metal and plastic cause these perceived rattles. They are very easy to fix. Just get yourself a can of spray that the use for motorhomes to remove friction from sliding parts like sliding doors or windows. It works great. Spray some on the door seals, hinges, window channels, door panels where thr panels come in contact with the door. You dont have to use a lot. You will be amazed how quiet the car becomes when you eliminate creaks and rattles.
@jakp8777
7 жыл бұрын
A Toyota with problems? Impossible! Must be the suppliers issue.
Hola a todos, tengo una duda que ojalá puedan aclarar; en este video noté que el FIAT 500 ensamblado en Toluca, tiene una "lupa" en los faros, sin embargo, al preguntar en la agencia me informan que todas las versiones cuentan con faros de halógeno sencillos sin la "lupa", esto a pesar de que en sus catalogos y pag. Web las fotos del vehículo aparecen con la "lupa"; mi pregunta es: porqué en méxico no venden la unidad con las lupas en los faros??? Gracias.
Bella macchina FIAT 500
At 6:47 the pole in the middle with the green color in the middle kind of looks like a vaping pen
yo trabajo dentro de la planta por eso lo se !!
el abarth también es hecho aquí !!
There's a few. A large dealer in Fayetteville AR sells Fiats. Number will probably increase as Fiat puts their mark on Chrysler.
Solo sacan lo mejorcito de la producción y los pobres obreros ni sus luces. Pero bueno
I have the fiat sport 500 2015 and I love it ... the only problem I have is the antenna and a part that is mounted on the bodywork but is part of the drawing of the window ... the rubber falls apart ... I have already had than change it twice ...😔
Having been a Fiat parts manager in 1979 and seeing first hand how the D.O.T. forced Fiat to buy back all of the 850's sold in the USA and the laughable way Fiat N.A. handled their warranty claims (they didn't). I would like to see some re-assurance regarding rust & warranty issues as to how they are addressing this concern to those of us with long memories. What techniques are they using and what recalls have been issued so far.
We could see some fixture for the assembling line.
@guillermoperez2750
6 жыл бұрын
赵银祥 , 😂 I think I know what you mean...TEAM WORK!!!!
Fiat 500 bello!
3:42 .. wow .. what a precision it should be !!!!
Engine is 1.4 Turbo...160hp from the factory....as far as it being worth buying...that's an individual thing...I don't need a large vehicle and so I wanted something to whip around town in....its a great car and really peppy. It one of the fast 0-60 cars in and out of its class. stupid ass you tube wont let me post the link to the 0-60 comparisons
My mum loves her fiat stilo abarth it’s 2004
Muy bonito el cochesito este pero ya me imagino los bajo de los salarios...
Looking at how much they're driven in the plant I'm beginning to think I was the only one to test drive my Abarth. Odometer had 4 miles on it when I drove it off the lot.
@dalepinney5001
3 жыл бұрын
Interesting you say that when you bought it did it still have the h next to the mileometer if it didn't then it had been put back to zero before you had it The car can do 99 miles on the h and still be returned to zero with the menu function on the right stalk as long as it hasn't gone over 100
@10rrafael tengo la misma pregunta!
@mrtecno99 i am thinkin about the same thing!!!! u weren't conveinced that the production's methods used in this vid below isenough!!!This is a link for the production of the Europenean version.
Fiat is moving Fiat 500 production to Poland from Mexico. I forgot what vehicle will replace the 500 in Mexico but there are supposed to be no job cuts.
thats the dodge Journey thats being built along side the 500
Concordo nettamente con le tue considerazioni. Aggiungerei: Toluca nemmeno è un impianto su cui si è dovuto intervenire con investimenti elevatissimi. La fabbrica esiste dal 78, ed era in perfetto ordine quando è entrata nell'orbita Fiat con Chrysler
They use double galvanized 22μm steel!
@buildmorefarms1007
7 жыл бұрын
Is that god or bad?
@krwilliams3876
6 жыл бұрын
Good!
MUY CARO EL VEHICULO, Y ADEMAS ES PANERO ELECTRICO
@gerardosalas9477
8 жыл бұрын
Que es panero?
Cosi per curiosità, ma e un impianto di proprietà Crysler? oppure proprio della fiat, lo chiedo perchè non sapevo avesse un impianto pure in Messico.
Guarda che proprio la 500 non è fabbricata in Italia, ma in Polonia (a Tychy). Questa è la fabbrica di Toluca, Messico, per i modelli venduti nelle Americhe.
Nice to know. The first Italian car that ISN'T hand built lol
3:40 O.O They've captured a transformer
@dulcesychocolates
9 жыл бұрын
This cell works with around 14 robots, one of the most exiting point in the process
Lo echo en méxico esta biieen echo
Fiat 500 😍💖
I checked, and you're right. What else can I say ... Sad!
Sorry Todd, but where did you read this? The 500 is already produced in Poland, but the two cars have different specs. Why should Fiat make them in Poland and then ship them across the atlantic ocean? I mean, we would be very happy here in Europe, but it doesn't make much sense
They used to be junk, but nowadays they are miles better. Still not perfect, though, but a thousand million times better than in the ol' dark days.
I live in the 14 km road to Toluca, then I live near this plant.
awuevo industria toluqueña...
Since I own one now (used '12 Sport), I've read up on 'em. The North American version gets its parts from 80% different vendors vs. the Poland version. We know where the engine comes from but I always wondered about the five speed transmission ? Assembled in Toluca at the plant ? Shipped from Poland ? Shipped from Italy ?
@mr2981
Жыл бұрын
Transmission is from Italy, says so on my old window sticker.
@kolbpilot
Жыл бұрын
@@mr2981 : Thanks. Mine works well.
tell me about it....I have a 91 Dodge Shadow Convertible that Ive restored with a 2.5 turbo which was the last car that I bought new and prices have really jumped...no wonder loans are for 5 years or more now