Glad Drew and Tucker are ok.

@macbook802

3 ай бұрын

Dude rides like a skid mark. He seems very humbled Hopefully he stays that way

@theservant752

3 ай бұрын

Prayers for a great full recovery in Jesus name!

@jamali450

3 ай бұрын

Yessir, prayers for them both. I was also hit by a car on my bike December 1st broke my back, ribs, punctured a lung and was knocked tf out . I’m just happy to be writing this comment ❤️

@PatG-yi1di

2 ай бұрын

Glad they are ok! Praying for Drew!

Steve is ruthless for the camera joke with the dogs😂😂😂

@shifty1927

3 ай бұрын

Tuck always snapping at lupin.😂

@iDopeCal

3 ай бұрын

Tuck said this my spot mf

"you dont want the metal to like, tear." "I disagree..." Flames start to appear around brian as his power level rises beyond comprehension

@Ea888Angry

3 ай бұрын

That part of the video was so funny lmao. “I said it was on fire”😭😭😭

@chadeverett2759

3 ай бұрын

Dj is to funny😂😂

That plastic clip is for your brake pedal that’s what turns your brake lights off when you let go of the pedal. What Iv always done is super glue a penny to the brake pedal and it’s fixed forever 😂

Appreciate Bhall dropping the lessons in there for us as always Damn Drew you got messed up, wish you a speedy recovery man. So glad to see Tucks good

Tell RJ being the reason his parents got divorced doesn’t make him a home wrecker 😂

Glad Drew and Tucker are Ok! get well soon homies!❣

how does bryan deal with yall 🤣 "bry took the day off today, got a looooottttt of work to do on the 240" "IT'S 6 O'CLOCK!!"

@LeonBates68

3 ай бұрын

High👌🤣

That clip on the floor was for your brake switch so your tail lights are gonna be on 24/7 just fyi

@reverendroger2221

3 ай бұрын

Came here to ssy that

Dj an ant busting Brian's balls is always hilarious

Shout out to Drew, Glad you’re still here idk even know you guys but that would have been really hard to deal with as a viewer if something worse happened to you and Tuck. You were always my favorite cameo in the beginning of Jimmy’s channel with DJ ANT and BRIAN helping Jimmy’s builds. Speedy recovery my man!

Ant’s car is the street cruiser that Jimmy says he’s going to build every time he buys another chassis. Then Spoon is cutting the floor pan and quarters out in the next video.

When I saw the grommet that he picked up in the beginning of the vlog, I knew exactly what it was. Lol. Those clutch/ ebrake stoppers will dry-rot on you. Had the same issue on my RSX-S not too long ago. 😂

@rubert.

3 ай бұрын

Those fuckers left me stranded in my 350z 🤣 10mm and a nut fixed it

@djnoway

3 ай бұрын

It didn’t hit me until later I was like ohhh that’s what that was smh 😅

So glad Drew and Tucker made it out of all that!!!

Listen to Boss... he's 100% correct about the stitch welding, there's a whole science behind it called Metallurgy!

Keep DrewTube safe at all cost !

Damn Drew you been through it. Prayers for a full recovery.

Background vocal of a great girl:The pizza is for Brian.. yaddah yaddah.. that's a keeper and Brian's manager.

Damn thank god drew and tucker are good. Hoping for a speedy recovery though. Hearing shit like that scares the shit out of me as I ride myself.

So fun to see Drew and Tucker! xD

Damn sorry to hear Drew. Stay Up G! One of the realest! Wishing a speedy recovery.

Glad Drew and Tuck are well. Can't wait to get my poster. Keep up the good work!

The notorious brake or clutch clip on the floor been there before lol 😂

17:00 hope surgery goes well today drew!!

So glad to hear that drew and tucker is okej and blessings to you both and hope you get a full recovery

This video was too funny! Drew hoping for a smooth recovery. God blessed you and Tucker. Keep it easy fellas 🤙🏼

Tucker a real one!

Keep them coming Dj great video bro 👍 👌 💯 🔥

yoooo hectic drew!! glad your both okay. when riding you almost have to drive for other people too. also keep hammering away on boss's drift car

The pieces of clips you found were from the the brake pedal. Keeps the brake light off when pedal is not engaged. the brake switch has a black button that the clip you found makes contact with. Put a nut and bolt on the pedal you’ll be fine

Get well soon Drew, speedy recovery 🤞🏼 Glad tuck was okay

Man couldn’t help but to shed a 😢 glad big homie Drew and Tucker are ok and back on the vids man 🙏🙏

my buddy got hit by a drunk driver and walks with a cane now but he still hits triples on the dirt bike. glad you and tucker are okay

Thanks for the cake DJ!

Dj the S Chassis content has been 🔥 and the posters came out sick 👌 telling Rj you can throw it out or hang it in your bathroom hilarious 😂 thats why i absolutely love the content yous don't always have to be serious like everyone else trys to be and its boring vids yous actaully enjoy yourself and you doing all the work at Jimmys shop 😂 priceless and Drew and Tucker glad yous are good 👍 and Dj keep up the great work 👍

I like when you do the car stuffs !!

Dam speedy recovery Drew. So glad they are both ok

Dj you’re a fuckin legend! Definitely one of my top favorite KZreadrs I love how consistent you are and actually finish builds

Brian is exactly rite bout the to much heat thing gotta love bhall him and dj always has me rollin love those guys keep it up yall bring all of us joy just watchin...... give ya boy a shout out be awesome make my fkn day really would keep it up yo

Dj the only guy to i know that waits till a blow out for an alignment sheesh

When you try to get the bead to pop keep rotating the tire and add lube between the rim and bead and it'll pop. Works every time. I use to do Mercedes run flats all day everyday. Works every time.

That wreck definitely changed drew. Glad him and tuck are ok I love them.❤

@Jakeplays712

2 ай бұрын

Also I knew that little crumbled up grommet was for your brake or clutch 😂😂

You should build James Honda beat next. He deserves it!

@ProbablyShouldntDailyThis

3 ай бұрын

This would be freaking sick!

“THIS IS A TRACK CAR …. RACE TRACK” hahahah I love Brian

I'm really glad Drew and Tucker are ok. A really good friend of mine died a few years back while riding home on his Harley. He was on the highway late at night I think it was 1 or 2 am and got hit by a car while on the Harley. He got rushed to the ER and straight into surgery. He didn't end up making it.

Damn I'm so glad Drew and Tuck are good. I love seeing Drew across yours and Jimmy's channel beefin with Jip. Speedy recovery to you bud!

5:11 has me crying

you also tack to stop larger sheets from warping or thinner plates from twisting. brians right if you blast it with heat all the way round in 1 go you change the temper of the metal so the inside is hard but the weilded out side is brittle and prone to snap.. imagine dj try to bend a tube or plate it will always be short and he would never know why. robots do spot wields mainly because in tests the object would warp from the continuous heat and the robot and software would have to correct its self so much, so instead loads of spot wields spaced keeps the material straight and not supper heated to change the steel temper. also if you F up a massive long bead you have to grind off so much offf to start over to get it right. and small spot wield comes off in seconds. brians wields plus gas and everything would be top dollar job if you paid for it. unlike most wielders now lack the engineering thought process side and creative understanding of the material. i was 11 when my dad taught me to stick wield we built 3 workbench's with square steel frame base he made 2 i watched then he guided me to build the last one, learnt mig and tig since and only really tig now seeing as nothings really thin enough for mig unless it joining aluminium. can someone sponsor brian some titanium to practice on and we start seeing some bits sneak in here and there. could start making titanium exhaust tip for all the cars and burn the all different colours with heat anodizing, the civic with a blue or gold tip would be mint.

Those weld in plates are absolutely necessary. Ive seen tweaked subframes and taco'd lca's plenty of times.

hyped for my poster

Omg thank the lord tucker an drew are ok poor guy that's crazy must have almost lost his mind thinking tuck got hurt or more be safe on the road fellas an heal up drew you da man

Holy Shit, stay up Drew!!.. Tucker is a fuckin soldier!!.. Yall some real ones!

When B's build is done you need to do a merch with his car. He has a unique taste in his builds and I know his build is going to be FIRE 🔥.

The bad clip in the hatch was toy stopper that pushes the brake light switch down they break after a while 😂😂 surprisingly it started that morning I was shook when the car turned on 😅

Damn this is why i haven't ridden a bike since i was 20.. you may be a great rider but other people in cars don't pay attention. Best of luck to drew wish him a speedy recovery 🙏 ❤

Can stitch welding also help keep it rigid but also kinda crumpled in a wreck instead of full weld bending the frame as much

Love rj’s new car😮‍💨

It's on fire!

That white plastic piece is either for the brake pedal or the clutch pedal . if your brake lights stay on then its the brake pedal

Good to see Drew and Tucker are alright

Wishing drew full recovery 🙏

Brian is a gem,

Got my poster on the way! 🔥

Gotta learn to hold that wheel fwd torque steer ain't no joke lmao 😂 my one friend basically put my car into a ditch when he did a 1-2 pull with his hand lightly resting on the wheel 😂😂

that old clip comes from behind the pedals!!!

first time viewer the pro car looks awsome

@djnoway

3 ай бұрын

Thanks man been going on on it! Welcome to the channel!

@Skye-ww1cc

3 ай бұрын

lol been watching a while now love the content keep up the good work your doing awesome

DJ "I disagree" lmao

5:15 This guy🤣🤣

Get well Drew! We miss you in the videos!

Is that the same girl from before from the boating video awhile back

@djnoway

3 ай бұрын

It is

@reed_reed

3 ай бұрын

Dj likes motorboating with his girlfriend.

Day 1 me asking. Help Ant paint his car . Love the content . 💙

Who makes the intercooler that Bri put on the s13 it looks a tidy job

Get well Drew 🙏 Boss can't see like he used 2 😅

Ant's S13 SR is exactly how I'd have setup wise in an S chassis. But I'd have a 180

tommy better drive this thing

Your brake light are on because that little plastic piece you found on the floor was the brake light switch . Same thing Happened to my eg. Lmao

That's crazy tucker come out no scratches

I hope you’re bringing a turbo with you to race Tommy.

Heat affected zones are not a theory, my tailpipe fell off and broke just after the weld. you can clearly see the weld is clean and still there but the pipe ripped off at the weld. Listen to Bri, he knows what hes talking

Put a v8 in the Silverado official petition

@djnoway

3 ай бұрын

She’s strictly a work horse would be sick tho

@3K-HQ

3 ай бұрын

@@djnoway just imagine all the heavy towing that horse could be capable with a v8 😂😂😂 but i feel u on that tho

Sipping an drippin

Lost my shit with the dogs😂😂I want a frenchie

Shoutout guardian angel yung tuck 🙏🗣️

hearts in chat for drew and tucker !!!

Ive got $10 bucks that says the plastic from the honda was the brake light switch.

Chicken legs are out! Lmao

Lmao found out what that plastic was

god bless drew and tucker

What's going on with the E60?

🔥🔥🔥

Wish ya the best drew. Same shit happened to me tried to get back on a bike but was to scared 😢 bought a camaro instead now I'm driving like ant lol. Dj 😊 weed and booze are fine but other drugs fuck ya life. Great vid. Tuk glad u good Playa

If you weld you know what Brian is talking about he’s spitting facts

Damn drewtube feel better

Ant need the anthony bhall paint job special

If you weld it 100% and the weld cracks you lose it. if you weld in sections and one cracks, they all dont.

Grommet or the brake light switch

Get well soon drewtube thank dog young tuck is a tough boi

top five dead or alive

e36s dont gain camber under compression like s-chassis. her shit is gonna rub lol

Who try cleaning their screen in this part 14:55 DJ camera had a spot 🙈