Once your wheels are fitted with those big brakes, don’t forget to add your ride to out Fitment gallery! www.fitmentindustries.com/add

@MrPh3n

Жыл бұрын

Hi team, I messaged your team via website but didn’t get a reply. I want to order a set of Brembo Big brake kit and a set of 21” BBS CH R-II, but unsure of the fitment. Can you please advise? Thanks!!

Imagine not measuring, installing, and then not being able to put your wheels on 😢

@whydoihave6neutrals772

4 жыл бұрын

WickedSlow_wrx time for new rims to😎

@Madvillian

4 жыл бұрын

just drive on rotors

I made sure to get the wheels into a higher offset to push it out with a 12MM Hub Centric spacer + Hub Centric Ring + ARP extended lugs to get the fitment and minimum reccomended brake clearance I wanted/needed for my front 18' Lexus 3IS. Lots of measurements was Involved and took me at least 3 months before I was comfortable to make my wheel purchase 😅

Oh my goodness this was so relevant to me. I am looking to get new wheels with a deep lip, my first wheels actually, but I have big Brembos and I am dreading getting the wheels and then they don't fit. However, you mentioning that the wheel manufacturer has the specs as well as the documentation by Brembo has my nerves calmed down. Thank you, I appreciate it a lot :D

Thank you for making this video and keeping it so short. No nonsense, just facts. 💪

Thanks fo changing aspect ratio! -every iphone x and newer user

@slablyfe827

4 жыл бұрын

Sina AV you’re welcome!

I enjoy these as vids as im almost about to get on my P's and ditch the learners and stuff like this srsly helps me for when I do get that car I won't just break it. P.S can u guys also do a vid about rallying like what kind of wheels, tyres and suspension are preferable, what to look for, what kind of car do you need, that'll be a nice vid to watch.

Merry Christmas Yall

(So you want to?) Changing Final Drive and Gearing-The Build Sheet Or transmission swapping

Hi gels this is Dario I got my shirt in the mail today and thank for the extra one

What is that jpg of Gels 😂😂

So I was looking to install wilwood or brembos on my g35 sedan what is all needed to install beside making sure the clearance is good?

Boiiii when i get a clinched evo this year. Its gettin some asterism black cr3ps at et20 18 x 13

Bro we want an e46

@bort46

4 жыл бұрын

i second this notion

@angelbermejo8637

4 жыл бұрын

I third this notion

@mcdonaldsdrivethru5124

4 жыл бұрын

I fourth this notion

@vizualmrs

4 жыл бұрын

No, JDM ftw

Do you do wheels first or brakes first? Esp when one shop doesn’t have both the brakes and wheels I want.

Whats that outro music. Sounds wavy

i cant find a set of wheels i like for 2018 dgm sti :/ suggestions?

The thumbnail is the face of someone who never knew you were supposed to do that😂

Can I fit 8 piston brembos on 2021 Q60 RS 400?

Or just drive a 80's car that came with 14 inch wheels. No need for brake caliber measurements. Unless Fitment Industries starts to sell 13 inch wheels😂🤙

#Wagoongang

Clearance from my wheels to caliper is 1mm, is that safe?

Fitment industries is filled with #chunkybois

So I’m looking at these ATS PERFEKTION rims that have an offset of 40mm, PCD of 5X100. Would these be suitable for a bigger Break kit?

Omg what wheel was that at 1:55

Focus st gang wya

When are you guys dropping the next driver to driver video

@FitmentIndustries

4 жыл бұрын

Friday at 12pm CST!

Can you make a video actually showing us how to measure the dimensions properly?

@FitmentIndustries

4 жыл бұрын

check out these videos - kzread.info/dron/3eJhn91qyf_4H4f0wfsw3w.htmlsearch?view_as=subscriber&query=offset

So as long as I go for a lower offset than stock I'm good?

@804MRMAN

Жыл бұрын

Not always true. I have 10mm less that stock and the wheels I got to replace for my winter setup through F.I. didn't clear big brakes. They barely clear my stock ones. But they are actually for a big brake, because the spokes are cut close around the hub with the smaller rotor. Once I put a bigger rotor on with the big brakes, it cleared easily.

So you want an e55

OT: Why do KZreadrs make/use Eff-faces for KZread thumbnails?

Nice, but where's the "so you want an e82"?? ¿?¿?? ¿? Xd

I’m here and firstttt

562st

pfff if the wheels dont fit, the brake discs are circles and spin too #notfuckingcasualsallowed

Wrong... guys you are only about the looks. What about brake bias, contact patch change, custom brackets for mounting... I think you should a technical video...’irrespective of which wheel brand you sell.

Bro, your hands and arms are all over the place! It's distracting!!! Stop it!!!