This is by far the best video series for fixing and polishing moulding. Thank you for taking time to do this.

@philr300

3 жыл бұрын

What Scott Frazier said. Thanks for posting this.

Gotta watch this series because from this very first video, I see a totally efficient, informative, instructional done RIGHT, as in NOT BORING NOW!!! Very impressive.

Cody. Thanks for sharing your tips and tricks, they saved me a bunch of money. I did all the Stainless trim on my 61 comet and I'm sure I save hundreds of dollars if I was to send the trim out...

@Tim.McElheny

5 жыл бұрын

How many hours do you estimate you took to complete the project? Also, what brand dolly did you get?

Fantastic tips ARC. I've been polishing for years and learned a couple new ways to tackle certain things within just the first 3 minutes. Kudos!

Excellent video. Thank you for taking the time to share this knowledge!

My scratchy Challenger-70 trim parts brought me here. GREAT video, THX

Sweet,thanks for the tips!

Excellent Information!

2: When sanding by hand it was suggest to use somekind of straight backing behind the sandpaper (ie:piece of wood) to keep your fingers from following the waves or dips already in the trim.

Nice dude. Good video and explanation. Thanks

Great vids. Wish I could learn to do this properly. I don't have a buffing wheel, only da, and drill, I can't seem to figure out how to do this properly

eXCELLENT

Nice CNC in the background

Great video Cody. Thanks for sharing. Do you know anyone that can fill a hole in a piece of stainless trim? I used to go through Harold Wallace in Camas but I don't think he's doing it any longer. I'm in Portland, OR.

@CudaCody

7 жыл бұрын

Sorry, I do not know of anyone. But thank you for watching my video and good luck with your project! :)

Thank you South Korea , I am so proud of your countries; accomplishments My USAF in OSAN Korea service 1965-1966 was for a great cause

Hi Cuda Cody -- love the videos, but one quick question- is all the trim on a 69 Cuda considered Stainless Steel. I've heard that excess sanding and buffing removes the chrome plating, requiring re-chroming. Thanks!

how do you take the dent on a curved trim piece?

Wow I need help on polishing trim for a challenger and look at this …

hii thanx for the tips. i do chrome plating, but i was wondering, why does my buf leave verry smal scrathes on my workspiece when i polish them,,, any ideas?

3: Another tip was to wrap the sand paper around the file to keep things flat... Also clean the file frequently so the filings don't create scratches.... another DA that was suggest to work well was... Astro Pneumatic 3050 Complete Dual Action Sanding & Polishing Kit. I have not used it, but looked like something that would work well.

شنو نوع الفرش الجلي

what are the names of the metal files used

I've had some good feedback with more tips I want to share with everyone. 1: Stacking buffing wheels will make a wider buffing surface and make it easier to keep the trim center while buffing. Be sure your buffer can handle the extra weight of the additional wheels. If you want to know how much your buffer can handle, go to Caswellplating website and look for the chart that shows the max wheels sizes / width.

4: I wanted to explain in video 2 to make sure your DA is set in "spin" only mode. Using the dual action will leave to many swirls in the trim.

@jse684747

4 жыл бұрын

Can I use a small air sander on low air pressure

I have swirl marks in my chrome exhaust pipes that won't buff out. Do you have any experience doing this with chrome or have any idea if this process would work?

Where did u buy the dolly and hammer

👏👏👏👏

What type of file? Light cut?

How do you get the urethane off the trim to start this process?? Any easy ways?/

@johndillinger8482

10 жыл бұрын

hair and grease remover/drain cleaner in the black bottle at home depot-eats the anodizing off quick

I notice the mopar trim buffs up like chrome . Gm and Ford don’t look as good . I will take stainless all day long but aluminum is work especially sanding pits out . People have no idea the time this stuff takes

Anyone know where I can in this type of Dolly

@DynamicSeq

4 жыл бұрын

www.eastwood.com/ew-trim-anvil-with-stand.html?SRCCODE=PLA00020&gclid=CjwKCAiAxMLvBRBNEiwAKhr-nNtQl3ceNh3gZt4j5cLDTtidrwD-xJlXSUbh6Y1GFebIC9_qifC7WhoCRLMQAvD_BwE

My grandma wanted to see this 😑😐💬

+1

see that FJ hiding in the back, hell yeah. Is that a 70 as well? We may have same garage...