I have the same question about the thread in the bobbin. Love all your videos. So many wonderful tips, ideas of items to make and the introduction to new notions. I learn the answer before I know I have a question!! Thanks for all you do. You truly inspire me! ❣️❣️❣️😊

Good evening Laura,Thank you so very, very much for this wonderful guide into using metallic thread. I have had an embroidery machine for over 20 years and i have never ever been able to find out just the things you have been talking about today. My little one is a Brother 3100D and it's big brother 4000D which i got about 10 years ago, with their prices matching their machine number (many years saving for both), but i haven't used them to their full potential because i was a distance away from the dealership, but also lessons were scant to say the least. On the occasions that i have used my embroidery unit i found that the thread kept snapping, which if i had known these tricks perhaps i would have had better success. I will order myself up some new needles and some washaway interfacing. Thank you flower, you have made my night with this wonderful embroidery do's and don'ts. Crafty hugs from Norah, Glenochil, Scotland

@grumpy_poo

Жыл бұрын

I have Brother machines too.... bobbinfil on the bobbin, Mettler or Gutterman threads and schmetz gold plated eye needles work for me.

@tamaraguckert8653

Жыл бұрын

J

Hi Laura, I always learn something new from your channel. Thank you so much for sharing and the Embroidery is beautiful.

Thanks for the. beautiful embroidery work on the machine now I can finish the project I have started long time ago

Hello Laura, like you I’ve always used fabric napkins. I will have to embroider some fancy pictures on them in future. Thank you for sharing. 💐

❤that was a good information video, I also have a set of metallic threads, beautiful colours and have used them using your methods and have had no issues. Thanks for sharing your knowledge

Thanks for that wonderful tips. I have metallic thread and I have had a lot of problems using it on my embroidery machine. Merry Christmas! 🎄😃

I've been afraid to use the metallic threads.....until now. Thank you for the video 😊👍🎄

Thank you for the tips, they are much appreciated. In the past I have given up using metal threads b/c I couldn't figure out how to keep it from tangling. Well, now I understand the why of it and will retry to do something a little more decorative. Thanks again and blessings to y'all. Merry Christmas!

Thanks for all the wonderful information.

Hi Lora 😀 .. What thread you put in the bobbin ? Is it same one or normal cotton thread ? By the way ... I love all yor work and videos .. and I learned a lot from you . Bye for now 🤗

@SewVeryEasy

Жыл бұрын

It is a thin embroidery thread.

Awesome tip! Thank you for this 🥰🎅👍

Great tips. Thanks for sharing.

I needed to hear this!! Thank you!🍃🌸🍃

Much needed info, thanks!!

Great information! Thank you so much.

Thank you Laura!

Did I miss what thread should go into the bobbin on a home sewing machine?

Than you.

Hi Laura, Thank-you for the informative video on metallic threads…… you are so concise in your explanations…. It’s a pleasure to you ! I love the Hummingbird design !, where can I purchase it ? Thank-you , Linda

Thank you! I'm busy doing Christmas napkins and my thread kept breaking because I'm sewing too fast!

To listen to you !

Great episode! Question- does the metallic thread break after repetitive washings

That was very interesting. I suppose using metallic threads on an overlocker would be a bit tricky? Best to get a matching colour and overlock the edges then metallic for the decoration?

Thanks for another great video! I'll have to see how I can put the spool on the machine like you did. Is that an attachment to your machine? My machines (a Baby Lock Vesta & Brother Luminaire) they both have the typical vertical & horizontal spool holders. Do you think putting it on the vertical & not threading it through the telescoping thread holder would work?

What type of thread do you use for the bobbin?

Beautiful motifs, Laura! Say, can a thread net be used with metallic threads? I've found them very useful when embroidering/quilting with the very slick Glide threads to keep them from just unwinding arbitrarily.

@SewVeryEasy

Жыл бұрын

Yes you can!

Thank you, very informative, but what would you use in your bobbin I don’t have an embroidery machine but I have quite a few fancy dancy stitches that would look good in metallic Thank you again :)

@SewVeryEasy

Жыл бұрын

Just a thin embroidery thread that you would use for any of your embroidery

@annemaguire657

Жыл бұрын

@@SewVeryEasy oh marvelous, many thanks for your reply, very much appreciated, blessings

Dear Laura, question re: Mettler elastic threads. I’ve made several coil-style throw rugs from clothesline and from jelly roll fabric and batting. Cupping is a problem, it’s difficult to make the rugs lay flat. I wonder if using the Mettler elastic thread would help?

Im having a hard time getting the metallic thread on a metal bobbin. Bernina. It just spins and spins. Any thoughts?

What thread goes in the bobbin?