Justin Pate of the Wrap Institute tells us how to wrap a front bumper, with the tricky angles and curves.
Жүктеу.....
Пікірлер: 23
@jesseDM2406 жыл бұрын
Justin and Carlos wrap a bumper, less than a hour and freaking amazing. Myself wrapping a bumper at home, 6 hours plus profanity.
@BlessedNoob5 жыл бұрын
Excellent again.
@SmartWentCrazy7 жыл бұрын
looks really good. Do you use that mold & hold tape everywhere that's not visible? Like under the hood, near vents, under the door, etc?
@icawn8 жыл бұрын
great video. you mentioned dings and scrapes under there. how would you prep a more severe case? i have to wrap a 2000, which is far from flat with dings and chips. much of the clear coat has also been deglossed. thanks.
@mitchell55448 жыл бұрын
Hey Mr. Dennison, I purchased a car a few days ago and was looking to do a vinyl wrap on it with just a plain matte black. Problem is that the car has clear coming off in several places etc, and I was wondering if it is possible to wrap it like that without it needing a new paint job and clear etc. so long as the clear is wet-sanded off the rest of the way to give a smooth flush feel. I have seen some comments in response to my question but none were certain either so I figured I should ask a pro who has perhaps ran into the same issue. Thank you Mr. Dennison. -Mitchell
@jupriadigp12018 жыл бұрын
awesome..
@adameccleston5547 жыл бұрын
Avery, which carbon fiber film would you suggest for wrapping fender of Polaris Slingshot?
@michaelapplewhite47158 жыл бұрын
could you wrap a 2016 honda foreman front and rear fender
@vilcemarmauricio64187 жыл бұрын
massa os videos, porém podia ter legendas,
@shastneol12786 жыл бұрын
May I ask what kind of equipment it is that the car is sat on to raise its level
@bradwatson3078
3 жыл бұрын
Race Ramps
@loganberinger11426 жыл бұрын
Couldnt i just take the bumpers and fenders off and wrap them separately?
@thecurvedr
6 жыл бұрын
Logan Beringer NO! You will hate your life if you remove the bumpers and try installing wrap.
@tedlumley4470
5 жыл бұрын
No not a good idea to remove bumpers to wrap them. They're just plastic and they'll be flopping around and causing problems during install. When they're on the car they're anchored down with way more stability.
@tedlumley44705 жыл бұрын
He's doing a great job narrating the process but once you get good it's all instinctive.
@Niko_3D3 жыл бұрын
Can't order mold' n hold anywhere at Croatia >.>... And shipping from amazon costs more than freaking 50m of tape...
@izzuanuar91377 жыл бұрын
where can i get this avery dennison stickers??
@Wrappedbydavid6 жыл бұрын
He was talking about the dusts and shits get underneath the vinyl but why he shaked so much on initial application. my eyes are bleeding srsly....
@dainebatchelor93828 жыл бұрын
thats a very simple bumper, they really dont get much easier that that one. why dont you show us how to wrap a complex one.
@bradwatson30783 жыл бұрын
Manage your heat, tension, and cuts and you can wrap almost everything
@AveryDennisonVideo
3 жыл бұрын
Nicely said!
@ali108338 жыл бұрын
its very hard to put in car but at least its more better than this shitty plasti dip
Пікірлер: 23
Justin and Carlos wrap a bumper, less than a hour and freaking amazing. Myself wrapping a bumper at home, 6 hours plus profanity.
Excellent again.
looks really good. Do you use that mold & hold tape everywhere that's not visible? Like under the hood, near vents, under the door, etc?
great video. you mentioned dings and scrapes under there. how would you prep a more severe case? i have to wrap a 2000, which is far from flat with dings and chips. much of the clear coat has also been deglossed. thanks.
Hey Mr. Dennison, I purchased a car a few days ago and was looking to do a vinyl wrap on it with just a plain matte black. Problem is that the car has clear coming off in several places etc, and I was wondering if it is possible to wrap it like that without it needing a new paint job and clear etc. so long as the clear is wet-sanded off the rest of the way to give a smooth flush feel. I have seen some comments in response to my question but none were certain either so I figured I should ask a pro who has perhaps ran into the same issue. Thank you Mr. Dennison. -Mitchell
awesome..
Avery, which carbon fiber film would you suggest for wrapping fender of Polaris Slingshot?
could you wrap a 2016 honda foreman front and rear fender
massa os videos, porém podia ter legendas,
May I ask what kind of equipment it is that the car is sat on to raise its level
@bradwatson3078
3 жыл бұрын
Race Ramps
Couldnt i just take the bumpers and fenders off and wrap them separately?
@thecurvedr
6 жыл бұрын
Logan Beringer NO! You will hate your life if you remove the bumpers and try installing wrap.
@tedlumley4470
5 жыл бұрын
No not a good idea to remove bumpers to wrap them. They're just plastic and they'll be flopping around and causing problems during install. When they're on the car they're anchored down with way more stability.
He's doing a great job narrating the process but once you get good it's all instinctive.
Can't order mold' n hold anywhere at Croatia >.>... And shipping from amazon costs more than freaking 50m of tape...
where can i get this avery dennison stickers??
He was talking about the dusts and shits get underneath the vinyl but why he shaked so much on initial application. my eyes are bleeding srsly....
thats a very simple bumper, they really dont get much easier that that one. why dont you show us how to wrap a complex one.
Manage your heat, tension, and cuts and you can wrap almost everything
@AveryDennisonVideo
3 жыл бұрын
Nicely said!
its very hard to put in car but at least its more better than this shitty plasti dip
man. had to mute your Ramblin