I appreciate the visuals to go along...alot of videos on this topic but none quite like this one. This will be super helpful in buying my harness.

@wilsworkshop

10 ай бұрын

Glad it was helpful!

Thanks for the video. I was noticing the problems myself and thought I was wrong. But I see I am right. Glad I have not purchased yet.

WOW!!!! I have been looking at harnesses. I didn't know all of that. I am swapping a l94 turned Ls3( truck Intake). Ls3/6L90 in a 03'Crown Vic Police Interceptor.

No hay nada en internet que explique mejor el tema!! muchísimas gracias por este video!!

Excellent video. There are so many different versions of this harness for sale from so many different sellers it'll make your head spin trying to find what you need, especially if you want plug and play. Personally I will always spring for the cheapest harness possible and modify it a bit. As long as the pcm connectors are correct you can pretty much make anything work. I have a 2001 5.3 swapped in an s10. I used the cheapest harness i could find, which was advertised as "LS1 4l60e". I have a manual transmission and just simply taped the transmission connectors into a bundle on top of the transmission. I could have depinned them or cut them, but there was no need to and the connectors are there if i ever need them. The only things that I needed to modify for my application was lengthen the 5 wire MAF connector (funny, it was advertised as an LS1 harness), lengthen the o2 sensor connectors, and lengthen the crank sensor connector. I also used EV1 to Multech adapters for the injectors, but you could just as easily cut off some multech connectors from the junkyard and splice them into the harness. I can see how quality control could potentially be an issue on these, but the actual materials used are just fine for the intended purpose. Cant tell you how many times I've heard people say they are a fire hazard and not designed to cope with temperatures under the hood. This simply isn't true. While I will say the quality of OEM wire is definitely higher, as well as the loom, it's not enough to always justify the extra time and effort involved with modifying a crusty old harness.

@wilsworkshop

Жыл бұрын

Yeah I haven't seen any that I'd conciser unsafe. Sure it's not GXL, TXL or SXL wire, but it's also not CCA (which would be unsafe). On higher end builds I always use PSI harnesses, since they're actually made with the right wire.

You are a wealth of information. Thank You.

@wilsworkshop

Жыл бұрын

You are very welcome

Great info I wish i had seen this before I was in the boat I’m currently in

I'm going with a factory harness off of my donor Silverado. That way I know everything will be right. I'm aware that I will have to do a couple modifications for it to work properly in a swap. Best part is that it's free and I already have it.

@wilsworkshop

Жыл бұрын

Good decision, factory harnesses are rock solid.

Very good video! Thanks for sharing 👍

Serious info drop, thank you so much for this...the mess of wrong harnesses on ebay is astonishing. I been looking for one on my 90 obs(02' L59/5spd/DBC)and its jut crazy trying for find red/blue-ev6-man trans-5 wire 😮‍💨

@wilsworkshop

Жыл бұрын

Yeah it's pretty annoying trying to find a budget friendly option for that type of application.

Always great information,thanks for sharing…

@wilsworkshop

Жыл бұрын

You bet

This info is gold, thank you 👍🏼😎

Great information!!

I recently just purchased 2 harnesses off of Ebay both 4l60 and 4l80 models. They both came with all the correct connection. For the injectors it came with adapters. Working properly at the moment IJS. Those pictures are just for reference or maybe I got lucky

@wilsworkshop

Жыл бұрын

That's good to hear, the few I've bought always looked like the picture so I had to modify them, but it's been awhile since I bought a cheap one.

@HeftyLefty5

9 ай бұрын

Link please!

This helped a lot thanks

What about the oil pressure sensor connector.

Good information, except the explanation of the MAF sensor is inaccurate. It IS 100% correct from a compatibility standpoint. Just not the specifics. The 5 wire has an IAT (intake air temp) sensor built into the MAF sensor housing. The 3 wire has a separate IAT sensor. The sensor is easy enough to add. But the difference shown in the tune file is due to the MAF housing diameter being different between the vehicles. The actual sensors are functionally the same for many GM vehicles of tbe LS engine family. It is NOT operating on a different voltage range as stated. The calibration is different due to airflow differences. It is an interpretation. The sensor samples only a small part of the total air volume. The frequency calibration is how the total air volume is computed. Example: If you only increase the size of the MAF housing, the sensor has no idea extra air is flowing by. Because it only measures a small area of the total cross section and the calibration hasn't changed. The frequency calibration would need to be changed via tuning in order for the PCM to determine the correct total airflow. The LS1 had a 75mm vs trucks having 85mm inside diameter MAF housing That is already a 13% difference in airflow if the air is moving at the same speed past the sensor. The PCM will see a lean condition and attempt to adjust for the airflow change without actually measuring a change in airflow. It will see the difference coming out of the engine via the O2 sensors. Just like havkng a vacuum leak, it will use O2 readings to adjust fuel trim. If the amount of compensation exceeds a preset threshold, it will cause correlation codes for MAF, MAP, & RICH/LEAN conditions. This is why genuine performance intake tubes require proper tuning or they will cause drivability issues and trouble codes. I hope this helps others understand some of the specifics and maybe help someone who's having issues with hardware/software compatibility.

@wilsworkshop

9 ай бұрын

True the total voltage range is 1.5-12v for both sensors. I just say it that way to make it easier for the average swapper to understand. At idle and running the trucks use a certain range within the voltage band and the cars use a different range within the voltage band. Neither engine uses the extremes of 1.5 or 12v, so their "operating voltage range" is different. The airflow volume is the real difference since the trucks are from 12.5-3600 and the cars are 18.4-3485. So I'll just call it "Operating Voltage Range" from meow on. The real issue I was addressing, is when someone buys a 3 wire MAF harness, plugs in a 3 wire car MAF, then buys a truck tuned PCM that has the 5 wire MAF settings and then they don't understand why the engine won't run and it's throwing MAF codes. Most people don't have or want tuning software to really go in and change the settings, they just want to buy parts that work. It's actually closer to a 28% difference in flow area between the two MAF's (PI r^2 those suckers).

I love being able to read the written info and still listen to the voice over, my brain can retain it all better so thank you! Subscribed.

Can’t find a harness for my LQ4 needs blue/ red connectors, multi fuel inj connectors, 5 wire ,and 4L80. Messaged multiple sellers on Amazon and eBay. No help. Have you seen one? Can you help? Thanks

@wilsworkshop

11 ай бұрын

Psiconversion.com should have one.

Fuck… I bought the wrong harness

A lot of the time they use generic images and not specific. Even thought there ARE specifics on the pictures like all of the labeling. Stupid.