Thanks for the hints!

awesome tips and BIG thanks

I'll be careful about the sun shining I to them. Glad I heard this tip. Thanks.

@FatThumbs

2 жыл бұрын

That explains the spot on my screen :(

Thanks for the tips 👍👌🔝

Thanks for the tips.

Thanks for information 👍

Great video!

@5zero7RC

2 жыл бұрын

Thanks! Glad you enjoyed it.

thank you!

Thanks for the tips...

I recommend using something like a hardhat lanyard attached to the goggles and the firmly clamp it to your collar or shoulder. I was wearing my goggle on my head when I bent over to pick something up off the ground. Fortunately, I felt the goggles slip and was able to catch them just before they hit the concrete. Also, you can ziptie something like an ID card clip to your power cord to keep the wire close to your body so that it does not snag on objects.

Muchas gracias!

Great tips .Thank you.I'm printed shims. For my head need to add more thickness on the top part :) . Will fix it . But it is really helpful.

Thank you for the info! I like there was no long intro!

Facts! Also wanted to let you guys know, I tested dozens of DJI antennas and found the “swr” is much better at lower channels so if you have a choice fly on channels 1 or 2 to get the strongest signal. Also if you’re using antenna extensions to go from the mmcx to rp sma adapters make sure you purchase the dji ones. The little braided white and gold/copper ones from amazon have very poor performance. The solid black dji extensions kept the signal much better. I can’t take too much credit my buddy is an RF Engineer 🙏

@5zero7RC

3 жыл бұрын

Thanks for sharing your tips!

Great tips, dude! Thanks a lot! 😊 My glasses are huge... Aviator's style... 😂 Anyway, stay safe there with your family! 🖖😊

@5zero7RC

3 жыл бұрын

Yeah, they probably would not fit very well :)

Also, only use a clean and very soft cloth on the screens. My eyelashes touch my screens and dirt/oil collects on our eyelashes so I often have marks I need to wipe off to see better. I read that the screens have zero protection from scratches on them.

How can I replaced the original baterry? Can I charge the baterry with regular phone charger?

Yikes! I know it wasn’t good to have the sun in but didn’t realize it would happen so fast... it’s been cold in Michigan and I typically fly by laying on my couch inside because the range is so good w DJI but when summer comes I will keep this in mind!

@noforyoutubepremium3108

3 жыл бұрын

lots of 3d prints, but even if it's only a cut out piece of corrugated cardboard, it's better than nothing! ;)

Wish I had known about Tip4🙄

I am disappointed that I have the green dot from sun exposure. I would not consider them ruined. For me, I don't notice it once I arm. Thanks for the video, good stuff.

ALL awesome tips. Don't use without antenna & remove antenna when not using plus I think getting a good case is important.

@5zero7RC

3 жыл бұрын

Also great tips, thanks! I think ( but don't know for sure) DJI has protection in place to not fry anything if you power up accidentally without antennas, but not worth the risk for sure.

@kwadkong

3 жыл бұрын

@@5zero7RC I hope so. I been using for 6 months & yesterday I plugged a 6S into them by mistake! Seemed fine though...lol

I'm trying to understand the optics of the V2 goggles. I could not see distant objects or near objects. I have gotten cataract surgery which fully corrected my sight far away but I need reading glasses. I expected to need the reading glasses with the goggles but to my surprise the image is virtually crystal clear. Since the goggles are only 2 or so inches from my face, why don't i need reading glasses?

@5zero7RC

3 жыл бұрын

The lenses in the goggles make the screen appear to be farther from your eyes than they really are. I forget exactly how far it is, but your eyes will feel like the image is 5 or 6 feet away instead of 2 inches.

There is a major flaw with V2. When I switch modes from DJI FPV drone to DJI air unit and back, you have to re-bind everytime.

@5zero7RC

2 жыл бұрын

Yeah, that is super annoying for people with the v2 goggles, the FPV Drone, and the FPV system. Hope DJI decides to fix that soon!

The upgraded DJI foam is THE solution. I did use the 3D printed shims briefly, but that option sucks compared to the Upgraded DJI Foam. It is sooo nice. ZERO light leak, and I have a very narrow face. They should have included it with the V2's and FPV drone kit. As for the diopters, I bought a set a year ago, and love them. I tried to get them for the V2's as well(I bought the DJI FPV drone), but even the DJI website says: "not available in your region"??? Some people are changing $50+ on Amazon and Ebay. I paid $20 when they were available.

@5zero7RC

3 жыл бұрын

Yeah, no idea why DJI lists the diopters as not available in your region. I would think the demand for those would be huge now with the release of the new drone.

My rc V2 had trouble issue witch stick control even I want to replace them on right position , someone can help me ?

@5zero7RC

3 жыл бұрын

Not sure I understand your question. Can you describe it more? If you want to change which sticks control throttle, pitch, yaw, etc, you can switch between mode 1, mode2, and mode 3.

Can you please tell me what battery you are using for the goggles 11.1 Or 14.8

@5zero7RC

Жыл бұрын

On the v1 goggles I use a 3s lipo battery (11.1v). You can also use a 4s battery, but don't use a 6s battery.

Sorry for the noob question. When im flying a drone using a 4s , whats the lowest Volt i can come down to before landing ? 14v? is there a setup where u get a warning when to land?

@5zero7RC

3 жыл бұрын

I prefer to set my ODS to display the average cell voltage and then land when my average is around 3.5 which is about 14v. you can go a little lower but that is a good target to shoot for. You might find this article I wrote helpful: fpvfc.org/beginners-guide-to-lipo-batteries

@dee1251

3 жыл бұрын

@@5zero7RC Thanks for the quick response. That helps. If I have like 6 batteries 4x 4s 850mah and 2x 4s 650mah , can i charge them all in a parallel charger or should all the batteries have the same mah rating?

@5zero7RC

3 жыл бұрын

@@dee1251 It is my understanding that you can parallel charge batteries of different sizes, as long as they are the same number of cells. Since those are all 4s, it should be ok, if you follow the usually precautions when doing parallel charging.

Buy protection lens for the goggles too ;) amazon is your frind

Please dear, i'v a problem with my dji googles V2 and the screen is totally frozen after refresh update.. I dont know why! Could you please help me to find a way to reebot manually ? Thanksss !! :)

@5zero7RC

3 жыл бұрын

What do you see on the frozen screens? To reboot manually just pull the power cable out. You might need to re-apply the latest firmware update. If that does not fix it, I would try contacting DJI support and they will assist you.

Well, I also learned the hard way that the plug... unplugs.

@5zero7RC

3 жыл бұрын

Yep, that's unfortunate. Hope you didn't break anything because of that. :(

I have a pair of brand new v1 dji goggles it doesn't have custom osd under the display tab. How can I get osd for my gps drones someone please help!!

@5zero7RC

3 жыл бұрын

Have you updated your v1 goggles to the latest firmware update from July 2020? That should give you the custom OSD option.

@skygroover6692

3 жыл бұрын

@@5zero7RC yeah that took care of it. Thank you

if you got googles dji from a kombo fpv , can i conect this googles with others dji digital system?...if the answer its yes ,how i do that?

@5zero7RC

2 жыл бұрын

Yes, the goggles from the FPV drone can be used with the dji fpv system. You need to go in the menu and switch over to the dji fpv system mode. Then they act exactly like the v1 goggles.

@flymode235

2 жыл бұрын

@@5zero7RC i tried but in my googles v2 dont have this opcion,,i saw few tutorials..but me cant find that opcion on my googles ,its why me asked,,,i have the last firmware on it ..and thanx for answer

@5zero7RC

2 жыл бұрын

@@flymode235 It has to be there but you need to scroll down to see it. Go to Settings -> About -> scroll down to the bottom -> choose Switch to Digital FPV System.

When flying in s mode. I see a red bar in the top middle of the screen sometimes orange And a beep sound. What does it mean

@5zero7RC

2 жыл бұрын

With the DJI FPV drone in sport or normal mode, it uses sensors on the drone to detect if you are getting close to objects. That red bar is letting you know you are getting dangerously close to an object.

@luciusd2584

2 жыл бұрын

@@5zero7RC first of all thank you for responding. Second it was an open field. And the goggles says when in s mode obstacle avoidence off. And the bar is like really in the top middle. I contacted dji but they say refresh firmware

@5zero7RC

2 жыл бұрын

@@luciusd2584 In manual mode, all the obstacle avoidance stuff is disabled. In sport mode some of the sensors are still enabled, such as gps and downward sensors. It could be alerting you to something with those sensors but maybe it still lets you crash into them, where in normal mode it will try to stop you from hitting things? Pretty sure I have also seen the warning bars in normal mode, but I spend 99% of the time in manual mode, so I'm not too sure.

@luciusd2584

2 жыл бұрын

@@5zero7RC thanks anyway. Im gonna check it out at a higher altitude. It was just strange with the beeping And flashing annoyed the f out of me

This guy is Alex Martin in 10 years

@5zero7RC

Жыл бұрын

Who is this "Alex Martin" you speak of? Google was not very helpful.

Do you or ANYONE KNOW HOW TO PAIR THESE TO MY MAVIC PRO .??.... DO I CONNECT CABLE OF REMOTE TO PHONE OR TO GOGGLES ??

@5zero7RC

2 жыл бұрын

These FPV goggles are not compatible with any other DJI drone. Only the DJI FPV drone ( and custom built drones with the DJI FPV system in them. ) None of the Mavics will work with them. Or are you talking about getting the video output to go to the DJI Smart Controller?

@allentraylor5659

2 жыл бұрын

@@5zero7RC you just answered my question... Now I have a set of goggles that I can't use.... Thanks

@5zero7RC

2 жыл бұрын

@@allentraylor5659 Sorry. That sucks. Hopefully you can return them or sell them for a good price. Try fpvexchange.com if you are looking to sell them.

How do I charge the dji goggle lipo?

@5zero7RC

3 жыл бұрын

If you are talking about the battery that comes with the v2 goggles, I don't have that battery, but I assume you charge them with a USB charger or a USB port on a computer by connecting the USB-c port on the battery to whatever USB charging setup you may have.

@headskull

3 жыл бұрын

@@5zero7RC yes, I was refering to the included 2S lipo. But you can’t connect a normal USB-C cable since it is 9v and the cable it comes with is USB-C to barrel connector.

@therealkazaster

3 жыл бұрын

@@headskull The USB C to barrel connector is to power the goggles only. charge the DJI battery with any USB to USBC charge cable 5 volts will do

I also use it while wearing glasses. Suddenly, My glasses scratch the goggle’s lens and leave a permanent mark🥲

@5zero7RC

2 жыл бұрын

That sucks! Hope the mark is not too bad. :(

Hi! My googles don't work. I have a message "image transmission stopped" they don't bind and most menues are inaccessible. Can anybody help?

@5zero7RC

2 жыл бұрын

Is the DJI Air unit / vista getting power? Is the light on the air uni/vista t on? If you are not bound to the air unit or vista you won't be able to access many of the menus. If you connect the air unit/vista to a computer does it show up in the DJI app? Is it running the same firmware as the goggles?

@olivierf.4931

2 жыл бұрын

@@5zero7RC thanks a lot for answering! I managed to bind the googles to the vista unit at last :-) But strangely there are still two menus that are greyed and they are important to me! It's the low latency mode and the camera menu. I also have only Two channels plus a channel 8 for public while the AUDIENCE menu is also greyed and inaccessible...

@5zero7RC

2 жыл бұрын

@@olivierf.4931 Ah, that's because of the camera you have. Not all DJI cameras can do low latency mode. If you have something like the nebula nano or polar camera, you can't do low latency mode. When you are in 50Mbps mode, you should get channel 1,2,3, and 8. In 25mbps mode you should get all 8 ( if you are in the USA or have done the FCC hack. ) I know some people have had to force a reset to defaults on the goggles and re-apply a firmware update to get all the channels to show up.

@olivierf.4931

2 жыл бұрын

@@5zero7RC I'm supposed to have the polar camera so that might be the case. But the greyed menu shows "low latency" as if it was locked in this mode and not the other one. That I find contradicting. Anyway you are certainly right. I will try to put 25mbps to see if the other channels appear. Even if they don't I don't think I would bother as long as I it works :-) I just want to get the best image possible as everybody. Anyway thanks a lot for you precise infos. Your channel is very instructive for beginners like me.

Takes a split second to burn the optics in these unfortunately. Ask me how I know.

@5zero7RC

3 жыл бұрын

Did you get them fixed or replaced?

I wish I came here when i just got my DJI FPV... I wudnt have let the sun shine thru the lens!!! Now i have green dots😭

@5zero7RC

2 жыл бұрын

Aw, man, that sucks! Hope they are not too bad and you can fly with them anyway.

I’ve seen a few post saying to not point goggles directly into the sun... of which will damage the screen but now listening to you say it’s the inside I feel they didn’t have a clue.. so this posts now irrelevant 😂

So basically buy a 3D printer…got it.

Man ur house is a disaster! Lol

@5zero7RC

2 жыл бұрын

:) that's just your averave basement/workshop/library/storage area for ya.

@nitsud77

2 жыл бұрын

@@5zero7RC lol probably better more efficient if it was organized. Good videos tho