you skipped over shifting the tint from left to right a bit when you were cutting the sides, Matt. Thought I would throw that in there for people watching who have never done window tint before.

This man does the best job of tinting windows and explaining the correct procedure to install window film of any video out there and gets beautiful results. This has helped me tint many windows with great results, thank you Matt for your expertise and explanation of correct method.

Great video, Mat. I think ppl should learn both methods of installation because some cars like this elantra are so easy to pull the seal out. Makes for an easier install

@DetroitTintStudio

Жыл бұрын

Absolutely!

Thank you so much brother. You give for answer about window side. I'm Fans from Cambodia 🇰🇭.

Nice informative video. I'm considering diy on my car. Doors are frameless so hoping it's easy to learn on. What type of soap solution do you like? And what ratios? TIA.

Great video.

Thanks for posting this short vid of info. FYI - I recently bought many of these tools from your site/s with hopes to eventually practice on vehicles when the temps are warmer.

Great videos 🙌🏼 may I ask what is in the bottle? Water and baby shampoo?

Hi mate! Have you ever tried to tint truck windows. Where to start and finish is difficult because once you down the windows it expands

hi, very cool videos. please record a similar video with the rear windshield

Great video

But dont you overlap the other edge while cutting? so you dont have a blank space inside?

where do you recommend buying tint online? which brands are the best?

Hey man once again great upload. Definitely appreciated. Do you perhaps ship to South Africa 🇿🇦? 😅. If not it’s ok I guess ( tools wise ) but I’m struggling to find decent film here 🥲.

Hi mat, on the fusion hybrid. I seen on one of your vids your fusion hybrid is orange side down, but this one is blue side.. Which side should I use? Thanks mate.

Love the videos... do you have one or will make one with more instructions about the dot matrix areas?

@DetroitTintStudio

Жыл бұрын

Thanks! Not much more to say that I haven’t said. They are going to silver and you can do some minor things to help the top areas on some vehicles

Is there any alternative vendors providing good quality tools in Canada? Most websites only deliver to the United States. Thanks in advance.

What’s the liquid in the bottle. Also what is glue for it? Do we have to use glue and if so is that what’s in the bottle?

Can i overshrink door window? because i have a problem with little teeths that i need to fight later with heatgun in tight space.

How do you remove that back plastic piece so well to start the window tint on windows

I got a question would you give any hands on training on window tint.iam willing to pay you

Love your videos! Just started tinting and I have no idea how you hold that film like that🤣 I have a death grip on the roll and it still starts falling sometimes lol also saw a video of yours from 12 years ago, loved it!

@henrymartinez6716

Жыл бұрын

little tip, also hold the roll at a angle so it doesn’t roll off the bottom, and the squeeze with just enough pressure to cut your piece

@henrymartinez6716

Жыл бұрын

if you’re right handed have the roll with your left hand and pull your tint out with your right and cut it with your right

@MrAlliqator

11 ай бұрын

There is only one trick it is tint quality. When you use thin tint you can’t do it like that 😄

What tool belt are you using?

Where does all the water u squeegeed out at the end go?

How do I get this tool from AUSTRALIA? Best I want something that recommended from pro.

Hola soy latino recién llegado a hungria. Tengo experiencia en ese campo me gustaría trabajar

Do you have Discord Group for tint if tou do i want to join!

OK whats in the spray bottle?

buy this Bhrush ?

Matt do you think the back window on a 2018 Camry, is moderately difficult or what?

@DetroitTintStudio

Жыл бұрын

Yea pretty average. The top corners can make it seem a little more tricky but really not bad. All the back window video I posted are relevant to it

How come you passed with the squeegee on the bottom fingers and it's gone 1 time? Is it because you did it with the heat gone before installing it ?

@DetroitTintStudio

Жыл бұрын

Exactly, If you shrink it right you have a perfect fit

Why do you add heat and is it necessary.

@DetroitTintStudio

Жыл бұрын

Film is flat and needs to form to the curve of the glass

Not pointed out but don’t use those carbon blades when cutting directly on glass. They etch glass very easily

@DetroitTintStudio

Жыл бұрын

Yes very important to mention

I thought you have to shrink the tint last,I wouldn't want all that moisture trapped inside the window.

How to understand the quality of films.

You can use a credit card and a hair blow dryer

@gloireadieu5315

Ай бұрын

The hair blow it's very weak

Hi, wht do you use for liquid?

@meowzass

11 ай бұрын

soapy water, add like 3/4 of water to a spray bottle and put like 4 pumps or drops of soap (i used dawn) but maybe use johnson’s baby soap

9 dislikes from shade tree tinters who are jealous of the shop lol

Let me get a discount for the products you sell

Anyone in Charlotte NC or close want to teach me tinting 🤔 like I will work for free just teach me

@laobe5119

Жыл бұрын

You need years to learn tinting car windows.

@chavi.i

Жыл бұрын

@@laobe5119 years is arbitrary