Awesome video mate, looks really goooood 👍 now it's time for fishing 👍👍👍⛺🔥🎣

@AusAdventure

4 жыл бұрын

Sure is. Thanks for watching mate.

Great video! Really clear and easy to follow 👍

@AusAdventure

4 жыл бұрын

Thanks for watching 👍

Great Video, Thanks for posting, it will be very helpful Cheers Anton

@AusAdventure

2 жыл бұрын

No worries mate. 🍻

I did my hornet trophey and mixed 50/50 fibreglass resin with acetone to totally water proof the marine ply before carpet. worked a treat

@AusAdventure

10 ай бұрын

Nice one James.

That was interesting but awesome.

@AusAdventure

4 жыл бұрын

Thanks for watching.

That is a nice job.

@AusAdventure

9 ай бұрын

Thanks Ross.

Nice work! You make it look easy?! Looking forward to some footage when you’re able to get out and about 👍

@AusAdventure

4 жыл бұрын

Cheers mate. Yeah really looking forward to going camping again.

Great work pal. Great to use the old floor as a template. I think if I ever had to do mine I’d think about going aluminium angle with checker plate to keep the weight down as I only have a 3.8m tinny. I always enjoy watching your channel. Keep the vids coming. 😃🐟🐟👍

@AusAdventure

4 жыл бұрын

Thanks mate. Just got a new min Kota I pilot so that is the next thing going in.

@TropicalZooms

4 жыл бұрын

Aus Adventure Excellent. I think you could do a vid on that. Installation, battery, charging and then motoring around using it. If my boat was bigger I’d buy one too. Stay safe pal. 😃🐟🐟👍

I always seal my marine ply then fiber glass it, then put a not slip paint on... i can't stand carpet, so hard to keep clean. You did a great job with yours! Just subbed 👍🏼

@AusAdventure

3 жыл бұрын

Thanks mate. Yeah the carpet gets full of water and sand but it’s nice on the feet. Thanks for watching.

love from india 🇮🇳🇮🇳. . like your videos.

@AusAdventure

4 жыл бұрын

Cheers mate. Hope ya staying safe over there.

Gees mate you’re putting me to shame! Nice handy work

@AusAdventure

4 жыл бұрын

Cheers Timmy. Hope Finland is treating ya well.

Nice One Mate

@AusAdventure

4 жыл бұрын

Cheers

Nice vid! We recently got a hornet trophy, looking forward to taking it out. Right now we have to redo the floor as it was all rotted out. Keep up the great work.

@AusAdventure

4 жыл бұрын

Cheers mate. Good luck building the new floor and thanks for watching.

Watched again. Went out in my boat the other day, and felt the floor crack. After having a bit of a look I noticed that my floor has started to rot too, so looks like I have to do the same thing. Thinking about going aluminium angle support & checker plate floor this time to prevent ever having to worry about it rotting again. Stay safe mate.

@AusAdventure

4 жыл бұрын

That sounds like a good plan. Ideally I would like a boat with a fully welded self draining hull. Maybe one day.

@TropicalZooms

4 жыл бұрын

@@AusAdventure That`d be nice, although i also like your boat. I like the 4.2 metre boats. Big enough to head outside but small enough to head up some of the small shallow rivers, still easy to launch & retrieve alone. I always get a bit envious when I see those Quintrex Renegades go past.

Great instruction, mate. I’m almost due to do this to my 4.1 and will also install a casting deck. Is it necessary to seal both sides of the marine timber as you did or is that just added protection for longevity of life? Cheers 🤙🏻

@AusAdventure

4 жыл бұрын

Mate it was a case of I had some paint and I wanted to prolong the life of the floor for as long as I could. Especially because the new carpet was a lot thicker than the old stuff which causes it to hold a lot more water. The timber not drying out quickly or properly is the major cause of rot. Good luck and thanks for watching.

@brisbanefisho9105

4 жыл бұрын

Aus Adventure thanks for the reply, mate.

Great video mate, super helpful! Just wondering if has stood the test of time and if you would do anything different next time before I give it a go myself? Cheers

@AusAdventure

Жыл бұрын

Cheers mate. It’s held up pretty well but I think if I did it again I would use contact adhesive for the glue. That stuff I used is easier to work with but I think contact adhesive hold better.

Hey mate, was wondering if you could show us how you built your casting deck? I really like the size and layout of it and would like to do it to mine. Thanks.

@AusAdventure

4 жыл бұрын

Mate I had an engineering company build the frame out of alloy then I made the deck. Send me your email and I’ll take some photos for ya.

Great Video. I see you used Marine Ply and also painted it to protect. Could you just use a good structural ply and Paint to get the same result? Also, what thickness did you use?

@AusAdventure

4 жыл бұрын

Cheers mate. I guess it depends on where it is in the boat and how long you want it to last. I have regular ply on the casting deck which I just sealed. I wasn’t so concerned up there as I can remove it easily from the boat and put it in the sun to dry. The floor cannot be removed and sits in the shade where I park my boat so it stays wet for a long time after I wash it. Hence why I used marine ply and sealed it. I want it to last as long as possible. As for thickness it was around the 10mm mark. Hope this was helpful.

@theowoollett1826

3 жыл бұрын

Just did mine and used 12mm structural ply and paint the heck out of it should be mint

Hi Wondering how you know where the screw holes in the aluminium are after you have the carpet glued down? I know you marked and pre drilled the ply? Also does treated ply chemicals cause reaction with the aluminium which causes holes to form.

@AusAdventure

3 жыл бұрын

Hi Ross I put a couple of screws in with just a small section sticking through the bottom of the ply. I then used that as a guide to find the holes in the alloy. When I had a couple lined up the rest found the holes easily. Hope that makes sense. The ply doesn’t react with the alloy but the stainless screws do. 👍

I like as much plywood on the boat as possible. Plywood is cheap floatation!

I have a Quintrex 385 I was thinking to put a casting deck and standing platform with carpet exactly what you’ve done. How much was the carpet?

@AusAdventure

4 жыл бұрын

It wasn’t very much mate. I think it was $80 for 3m. I got it from Bunnings so you could look on their website for an exact price. 👍

@jordanbigby2031

4 жыл бұрын

Aus Adventure cheers mate. Much love your way keep doing what your doing mate.

I have to do a similar job so thanks heaps, that was excellent. Quick question, did you use stainless staples or plain steel staples? Thanks in advance, PT.

@AusAdventure

4 жыл бұрын

I pulled the staples out once the glue dried so doesn’t matter what they are.

@paultaylor3856

4 жыл бұрын

Aus Adventure good thinking, I didn’t realise you did that. Thanks.

How much of that adhesive did you use for that deck I am thinking of using but not sure weather to use the 1 L or the 4L thanks

@AusAdventure

2 жыл бұрын

I will have a look and get back to you mate. Probably on the weekend.

Great vid, but question: Why did you have to remove the staples?

@AusAdventure

3 жыл бұрын

Cheers mate. Staples were mild steel so didn’t want them rusting in the boat. I couldn’t find any stainless ones at the time.

@theowoollett1826

3 жыл бұрын

Aus Adventure having the same issue. Whitworths is the only place that does them

How do u go about storage of life jackets and ropes ect, basic spares n toolset it looks Ike no storage under the cast deck

@AusAdventure

3 жыл бұрын

Hi mate. I store those items under the anchor well and under the casting deck on the starboard side. I try not to carry too much stuff so there is plenty of room.

Good vid nice neat job Ps. Is the hr running a small block in it

@AusAdventure

4 жыл бұрын

Cheers mate. I wish, it has the old red motor in it.

@Northbound72

4 жыл бұрын

@@AusAdventure Nice nothing wrong with that old school 👌 Do you chase mangrove jacks

@AusAdventure

4 жыл бұрын

brett Beerman I have only tried a couple of times chasing Jacks. Got one from a kayak but that’s about it. Might be something I’ll give more of a crack of in the future.

Stupid question..... how did u get the ORIGINAL templates for the ribs?? And the screws are they treated as I have heard about electrolysis

@AusAdventure

3 жыл бұрын

Mate what ever I take out of the boat I try to use it as a template for the new pieces going in. Screws are marine 316 stainless. I use Duralac on them to try prevent corrosion between the different metals.

@Shreko84

3 жыл бұрын

@@AusAdventure yea my false floor is a result of previous owner I want to ditch batteries to rear and drop the floor down

@Shreko84

3 жыл бұрын

@@AusAdventure have u got fb so I can chat a bit more with u about ur build

@AusAdventure

3 жыл бұрын

I just have instagram mate. @aus_adventure_

What kind of boat is that? I like the set up of it…

@AusAdventure

10 ай бұрын

It’s a 2007 4.2m quintrex topender c.V

What size stainless screws did you use? Thank you.

@AusAdventure

Жыл бұрын

Hi Danny not sure of the size as they were the one’s the boat came with.

What are you using for support in the middle of the tinny

@AusAdventure

2 жыл бұрын

It’s just the frame that the boat came with from factory.

I wonder if that was old factory wood . Before you changed it

@AusAdventure

4 жыл бұрын

Yeah it was

Why remove the staples? Good job man

@AusAdventure

3 жыл бұрын

The staples were steel so they rust really quickly and start dropping into the boat. If I had of found stainless steel ones I probably would have left them in.

@chowboy44

3 жыл бұрын

@@AusAdventure Thanks for the reply bud. If you can find them, monel staples are rust proof

Are you in maroochydore on the canals i swear we lived in that 2 storey house next door.

@AusAdventure

2 жыл бұрын

Nah mate Gold Coast.

Hey mate just wondering the dimensions and thickness you used for the plywood

@AusAdventure

3 жыл бұрын

Mate think it was 10mm thick. I just got a whole sheet from Bunnings. I’ll double check the thickness tomorrow and let ya know if it’s any different.

@AusAdventure

3 жыл бұрын

Just checked it. It was 12mm marine ply.

Any reason for removing the staples after the glue has dried?

@AusAdventure

3 жыл бұрын

Yeah they rust. Couldn’t find any stainless ones.

@calum8995

3 жыл бұрын

Aus Adventure makes sense cheers

I want to buy a tinny. I’ve never owned I like yours. What kind and what size outboard

@AusAdventure

3 жыл бұрын

Mate it’s a Quintrex Top ended 4.2m with a 30hp Honda outboard. If you want to see a bit more of it check out my USB install video. Thanks for watching.

@theowoollett1826

3 жыл бұрын

For the piece of mind I’d paint it any way mate doesn’t cost much to throw a lick of paint on could give you few extra years

Isn’t that a contact adhesive? You are supposed to put glue on both the carpet and board and wait till they become tacky and the put them together.

@AusAdventure

3 жыл бұрын

Nah mate that glue is not a contact adhesive. That is one of the reasons why I used it as it’s easier to do one surface and you don’t have to wait before putting the two materials together.

Maybe a HD or HR under that car cover? 🤔

@AusAdventure

4 жыл бұрын

HR brother.

@outdoors5352

4 жыл бұрын

@@AusAdventure Noice 👍

How much would’ve it been in total?

@AusAdventure

Жыл бұрын

The total cost was around the $200 mark I think. It was a while ago so Im sure it would cost more now.

Is that 12mm?

@AusAdventure

3 ай бұрын

Nah it was 9. 12 would be better.

How many metre tinny?

@AusAdventure

4 жыл бұрын

4.2 mate.

what casting deck

@AusAdventure

2 жыл бұрын

Not sure what you are asking about the casting deck mate.

@brodiedsilva5975

2 жыл бұрын

@@AusAdventure is it d.i.y or did you buy if bought what one or brand

@AusAdventure

2 жыл бұрын

@@brodiedsilva5975 I had a welder make the frame and I made the ply wood deck pieces.