Ok this took me back 25 years or so! (Aging Minitrucker!) Build me one too! Seriously!

@VinyB57

2 жыл бұрын

Yep!! good old mini trucks! But I can't build you one...my wife won't let me! 😅

Love your trailer sir. My only recommendations are first I would add a wireless winch controller too your winch and use the cabled one for backup purpose. would make loading easier. the second is weld on some D-ring shackles or even mount an etrax system to give it some more strapping locations. the final thing i would do is in your open center location. add a storage box for straps, chains and tie-downs. really more just some accessorizing ideas. Otherwise like i said awesome trailer sir. cant wait for you to post plans. I like to build one for hauling my four wheelers. the easy on easy off functionality would be awesome.

Great project! I’ve been thinking about building a 2 axle like this! Looking forward to getting a set of plans once they are available!

Rewelacja - świetna robota... 👋👍

Hi mate from down under i'd be interested in what you come up with for a dual axle and if i can buy ur plans when they are available

Hey man! I love what you do! I think your projects are very interesting. Thanks for posting your workmanship and keep up the great work!

I've been looking into converting my single axle track car trailer to a system like this since I first saw the same trailer you showed in the first video. Waiting patiently for the plans... my trailer needs this.

@VinyB57

2 жыл бұрын

Working has I wrote this comment on the drawings.

That is an awesome trailer design for cars. If you have ever tried to tow a low vehicle or classic on a trailer it's damn near impossible to get it off without scraping the pipes or the frame of the car bottoming out. Hands down this is awesome. Of course heavier cars would need four swing arms versus the two for this build but even with that saying just on design and execution for purpose, I give you a solid thumbs up brother. 😁👍

Really impressed by all your work ! Well done!

@VinyB57

2 жыл бұрын

Thanks man!!!! On crinque l'algorithme!!!!

AMAZING

Hey Vine B. I'm readly liking your channel. I stumble across your channel and I think it's a great channel with good content you must keep up the good work and coming up with some good ideas and show us how you did it. Great job, thank you for sharing with us. Im way down in Tennessee. You are very inspiring, it makes me to get up to use "hands and mind" something like that.. Thanks again and I will watching more too.

@VinyB57

2 жыл бұрын

Thanks a lot Sir Tony! Glad it inspired you! 😁

Nicely Done!!

@VinyB57

2 жыл бұрын

thanks Bryan!

you really perfect man...very good workin

@VinyB57

2 жыл бұрын

Thanks man! 👍

Wish I was clever like you. Brilliant Job.

@VinyB57

Жыл бұрын

Thanks Phil! 👍

👍👍👍 great job

Great work! Can't wait for the plans

@VinyB57

2 жыл бұрын

Working on it right now!

@BradenEwell_3238

Жыл бұрын

Where can plans be bought?

Great video man 💯👍

@VinyB57

2 жыл бұрын

Ryan, my man!! Thanks dude! 👍

Tandem axle car hauler would be amazing! Love your build man 🇺🇸

@VinyB57

Жыл бұрын

Thanks man!

@Viny B - I've watched all four of your trailer build videos. Great job. A cheap and somewhat easy way to keep the airbags in better alignment when aired down or when fully loaded is to bolt a 'suspension limiting strap', (a glorified seat belt with steel reinforcement loops), to the top of the airbag and mount the other end somewhere near the axle. This will help keep the airbag from rolling forward and prematurely wearing the top of the airbag out. On Amazon, they start out at $13 U.S.D. and run to $50 + U.S.D., or you can make them out of seat belts from an auto salvage yard if you have access to a sewing machine with a blue jean or leather rated needle and thread. @Viny B - J'ai regardé vos quatre vidéos de construction de remorques. Bon travail. Un moyen peu coûteux et assez simple de maintenir les airbags dans un meilleur alignement lorsqu'ils sont aérés ou lorsqu'ils sont complètement chargés consiste à boulonner une "sangle de limitation de suspension" (une ceinture de sécurité glorifiée avec des boucles de renfort en acier), au sommet de l'airbag et monter le l'autre extrémité quelque part près de l'essieu. Cela aidera à empêcher l'airbag de rouler vers l'avant et d'user prématurément le haut de l'airbag. Sur Amazon, ils commencent à 13 $ US. et courez jusqu'à 50 $ + U.S.D., ou vous pouvez les fabriquer avec des ceintures de sécurité dans un parc de récupération d'automobiles si vous avez accès à une machine à coudre avec un jean bleu ou une aiguille et du fil de qualité cuir. [Sorry, Google translate doesn't yet have a French-Canadian/Quebec setting. Désolé, Google Translate n'a pas encore de paramètre Canadien-Français/Québécois.]

Thank you for a nice build and for NOT showing how you drilled 473 holes and put in each one of the 473 screws. Straight and succinct, good.

@VinyB57

Жыл бұрын

Glad you appreciated it! 👍

Freaking EPIC. Can't believe this video is currently under 10k views

@VinyB57

2 жыл бұрын

Hey Buddy! Actually, if it can get more views ONCE I'm done with the drawings...I would prefer it! 🤷‍♂️! Glad you enjoyed it Austin!

You are next level

@VinyB57

Жыл бұрын

Big thanks!

Think a shroud around the air bags would be helpful.

HOW TH F*** YOU DONT HAVE A MILLION SUBSCRIBERS IS BEYOND ME!!! Keep up the great channel.

@VinyB57

2 жыл бұрын

Just started...yell 1.5 years ago...there a lot of good content on KZread...so I'm getting there...but slowly! Thanks for the encouragement! 👍👍👍

Hay vinyl B ...do u sell any of the planes of your work on the smart car..where do I get them

I hope the plans will be available soon :) I’m hoping that the CNC’d parts could be cut using the send cut send service that is available at most machine shops.

@VinyB57

2 жыл бұрын

Should be out by the end of this week, at the worst next week. About the sendcutsend, first time I heard about it, but I'll include all the DXF files to cut the parts!

Awesome Awesome Job dude.. I just TILTED MY HAT..

sweet build bud, i would say mabye build a cover or blocker for the air bars so rocks or other trash wouldnt slap a hole in them

Is there a way to "pin" the trailer to keep it from going below a minimum height while still having full suspension, asking in case an air line or bag was to fail while in use.

It helps with air ride to have a slave tank. Air has a rising spring rate. Adding more volume will help.

@VinyB57

2 жыл бұрын

That a good thouht! Maybe I will not close the 2 valves and do some testing. I'll have to be carefull to balance well the weight from left to right since both bags will be connected together.

How much if a pain was it to get legal? What state were you going through to get it done?

Out of curiosity, how much did the materials cost? I am trying to decide if I want to purchase or build. I have all of the equipment already. Great project and videos! Thanks

@VinyB57

2 жыл бұрын

It costed me about 2800USD.

Solar power a bit overkill ?

Bad ass!

@VinyB57

2 жыл бұрын

Thanks man! I heard you,re gonna have a new ''neighbor'' ( I don't really know how far appart Auston property is from yours 😅)

@DeathTollRacing

2 жыл бұрын

@@VinyB57 yeah. There goes the neighborhood.... he’s about 30 min away or so.

Someone should convert boat trailers to drop like this. I know if I could lower mine just 3 inches I could park it in my garage.

I know you haven't got the plans up yet, but can you share any info on what you used for the pivots for the swing arms?

@VinyB57

2 жыл бұрын

It's a secret....for now...You'll get all the infos in the plans soon...ish ! 😅😁

Great trailer, but wtf happened to the smart?

I want to do something like this to my enclosed 7x 14 single axle ... do you have plans out yet??

@VinyB57

2 жыл бұрын

Yep: 57design.ca/

Good job máster donde puedo descargar los planos ? Thanks

@VinyB57

Жыл бұрын

ir a mi página web: 57design.ca/

Quality

@VinyB57

2 жыл бұрын

Control

you looking to sell this or build one to sell?

Hey how much in material did this cost you? Also great job.. very detailed

@VinyB57

2 жыл бұрын

2200USD, without compressor, winch and battery, just the trailer

@kboi1da550

2 жыл бұрын

@@VinyB57 thanks for replying back. That's really not bad. As a home build, it would be difficult. The pieces you used with the cnc plasma would be hard to duplicate. Your plans provides a cut-out guide? Or would we need to find someone to do this part of the build. Love your videos and channel. Keep it up

Et le prochain projet, un voiture de drift ?

How much do you think it could tow?

@VinyB57

2 жыл бұрын

2300lbs has it is...with another 3500 axle, you could had a good 3200 lbs so close to 5500lbs in the double axels configuration.

Commentaire ce que tu fait génial et j aimerait communiquer avec toi pour acheter ton plan pour faire une remorque un peu plus étroite pour transporter mon coffre à outils et des motos et je ne sais comment faire, merci

@VinyB57

2 жыл бұрын

Salut Richard, tu peux acheter mon plan sur mon site 57design.ca et tu me poseras tes questions sur mon courriel design57@outlook.com

LOL, they are for sale in Australia. Better build as well.

How much if u were to sell one ..12 ft bed? Double axel

@VinyB57

2 жыл бұрын

hummm good question, don t know about 6-7k for a single axle

@theinnocent714

2 жыл бұрын

@@VinyB57 not bad about the price but i forgot that it would still be tilted if it was hitched to a vehicle? So in order for this to be completely flat to the ground is for it to be unhitched?

I’m impressed , great job , you could sell them ? I had a question LAST video if you could make me a pair of side vents like you made on the smartbusa , I still can’t find anything that would work for me ! Viny could you let me know either way , I know you’re busy and I will pay you by PayPal Thanks. Alan

@VinyB57

2 жыл бұрын

Alan....I'll be glad to help...but for now, with all the engagements I already have, I have to decline 100% of all the side jobs that people like you are offering me, maybe one day, KZread will pay enough that I could do only that with side jobs. But thank you for the oportunity my friend! Sorry I mist your question on the last video.

@AlanDavid1955

2 жыл бұрын

@@VinyB57 THANK YOU FOR RESPONDING AND I DO UNDERSTAND !!

Bonjour sa reviens à combien de le monter sois même comme vous l avais fait il faut un budget de combien et savoir pour un deux essieux si vous pouvez me donner le plan de construction et les pièces où les acheter car c est le meilleur boulot que j ai vue et je l aurais aimer en deux essieux je suis de France merci de m indiquer si je peux vous laissé mon mail

@VinyB57

Жыл бұрын

Salut Lyacine, en $ canadien, le 2 essieux, coutait environ 4500$ en 2021, juste en composantes. Sans ''winch'' et sans compresseur. Je vends les plans ici: 57design.ca/ Vous retrouverez dans les plans, une liste détaillée pour toutes les composantes avec leur numéro de pièce. Cependant, vous allez devoir faire vos propres recherche pour trouver les fournisseurs Francais, comme je suis Canadien.

Wait what happened to towing it with a rusty gold van? Lol

can I get a drawing?

@VinyB57

Жыл бұрын

Yes go to my website, design57.ca

Drawing for me pleass.

@VinyB57

Жыл бұрын

Go see my website: 57design.ca

Air is not guarantee

Hey Viny, what has happen..... are pepole crazy.....looking at your canal... why??? Jocking aside what took pepole sssooooooooo lllllllooooonnnnnnnnnnggggggggg, but some of them are here now! I will say what, Im a pretty smart man, you are alot smarter, when me ok many pepole are smarter when me, but in this case I have been a suber since around 3 years.... then I have to bee alot smarter then the about 7-9000 subs in the last mounth......... YOU HAVE NOW PASSED 13000 SUBS MUST FELL LIKE WINNING THE WOMEN OLYMPIC SOCCER GOLD OVER SWEDEN, YES, YOU CANNADIENS VS ME SWEDEN! IM HAPPY FOR YOU AND HOP YOU GET MORE! GRATTS FROM SWEDEN!

@VinyB57

2 жыл бұрын

Tony...that was a good one! 😂 Don't know what happen, maybe people did get confused with another channel..🤦‍♂️ Seriously, the time lapse on the smart went viral for a week...so yeah, new subs and that's kinda a bit of a relief, I've been working really hard on that channel and sometimes, it's nice when it gets some attention! You sure you've been subed for 3 years...I only starded less then 2 years ago...😅🤔 Keep up the colorfull comments man, I enjoyed it!

@tonyestvik7969

2 жыл бұрын

@@VinyB57 I will, and I was seen the second part of the Smartbuza and beacuse I missed the first... but I vill also remember that I saw the carlift, ok I think you hade 11- 1250 subscribers then I signdup......

Nice but overkill. With the weight of the frame n wood your trailer probably 1000lbs alone

@VinyB57

Жыл бұрын

You re 100% right!! It s overkill and I like my builds to be overkills! I can rely on it and with a proper maintenace it will last decades! All hail overkill! 😅

Il problema è l’omologazione per girare per strada