Timberjack 360 skidder brake assembly assessment
Автокөліктер мен көлік құралдары
Digging further into the ttb 2220-1 transmission, this time getting the brake assembly apart to see what it needs and how it works. Part of the TImberjack 360 rebuild.
Digging further into the ttb 2220-1 transmission, this time getting the brake assembly apart to see what it needs and how it works. Part of the TImberjack 360 rebuild.
Пікірлер: 8
The T in the brake line is to drain water out of the system, that is the lowest point and condensation ends up rusting the bottom brake cylinder.
Correction on my machine. There is one cylinder on the bottom not one on the top like yours. That T is to bleed air out
@DillonHFM
6 ай бұрын
only way to get the air out
The tee do you think it would go to electric parking break?
@DillonHFM
Жыл бұрын
The parking brake is a mechanical one. There is a tee on it so that the brakes can be bled. Because the tubing goes up and over, the tee is to let the air out of the top if the system
Hello, I have same Transmission on TBJ360 in Bosnia and Herzegovina. Please, of course if you have, could you give me Part number of: round square piston ring and rubber cup seal? Maybe it could be in brake piston set? I try to find it a long time, but I watch this and see that is the same as my transmission. Regards
It is clark transmision?
@DillonHFM
Жыл бұрын
It is an Allison, they were used in lots of machines, I don't know if they were in Clarks, but it is certainly possible