Looking to support the Channel? and or pick up a Discovery ED PRS 5-25x56 GEN2 www.cdnprecision.com/shop

T1x owner here I have about 2000 rounds through mine since buying it this winter. I have been very happy with it so far, I have had maybe 4 failure to feed in all the rounds I’ve shot. I dropped mine into an MDT oryx right from the start but it will shoot pretty much anything 0.5” for 5 rounds at 50y. Mine quite likes the cheap federal auto match 10 shots into 0.76 at 50y!

The T1x has a 45 degree bolt lift, one of the reasons who it can cycle quite quickly. Removing the plastic insert in the stock does help things out on the accuracy front as well. I've been shooting mine in NRL22 for the last couple of years and it loves a diet of SK Long Range. 10 rd groups in one ragged hole all day.

Jard makes a fantastic match trigger for the T1X that runs from 3oz to 12oz and a non match that will do 9oz-24oz with springs. It's crisp and worth every penny.

T1x owner, I got best results from SK Rifle Match. I missed when you stated the distance but in my testing doing 5 shot groups at 50 yards average for 3 5 shot groups was .42” with a best of 0.34 and at 100 yards average was 0.81 with a best of 0.65. They will shoot!

Thank for the info on the firing pin, will get a couple on hand. Keep them coming.

Richard -had a Tikka T3X-CTR stock when I put my 223 in an MDT chassis. The CTR stock has a nice higher comb height and really free floats the T1X barrel all the way to the receiver, used SX-LRM and CenterX at 100yds and got consistent groups below 1MOA in moderate wind.

I love your accuracy test. I will stay loyal when you put out quality ilke this.

@EpikArms

Ай бұрын

well thank you sir!

Great and thorough video. Just came to say thanks and comment for the creator(s). Thanks!!

Great video. Many same any T3 or T3X trigger fits into these. Also, you can register the rifle online with tikka, upload your proof of purchase and you get an additional year warranty.

cheers from italy! i got the 17hmr, and shoots really well, but, i had problems with the barrel touching the stock, solved by removing the plastic support in front of the action and working with sand paper the stock to get a complete free floating barrel. It got better by adding an adjustable cheek piece and the vertical grip from tikka, not to mention a timney trigger. For me is a very cheap and funny toy but need a little "love" to put out the best. Nice review btw

Thanks for doing the Tika review, i have had mine for 3 years now with about 20k rounds through and using the same chassis that you have and the yo dave trigger spring, I regularly have the feeding problem that you were having, mine is almost always on round number 6 and once i fix it i carry on with no problem, my question is i noticed you had the aftermarket magazine ,15 round, and i was wondering if you had the same feeding problem when using that magazine, i would certainly get one if it fixes the problem , keep up the great videos !!

Hi I quite enjoy all of your videos.some day you should do I hunting scope comparison.

You have the Timney Triggers, but i haven't change my trigger, i have changed the spring and that's good enough!!

Waiting for you to do a review on the Sig Sauer Cross PRS Rifle

Owned my T1X for 3yrs now with over 2000 rds fired and only issues I had is the ejection spring fails to fling out empty case. Might happen once in 200ish rounds. I agree stock is rubbish but throw it into an aftermarket stock and it comes to life precision wise. SK brand ammo for the win with mine. Like lasers @50m. Bro, no wonder your pin snapped! Have you not heard of bolt face maintenance 😂😂😂.. eeeeek! Also the odd miss feed in urs would be a magazine spring/follower issue. Get a new mag.

They tout these as *MTR* match target rifle? do they have a match chamber. i wonder because they shoot awesome for a mid profile barrel!?! i'd be curious to see the T1X UPR... pretty pricey! Great video as always, Cheers

Alex who do you get the firing pins from?

What was your shooting position? Bench, prone, tripod?

I was waiting for the comparison of CZ and Tikka from you... could not choose... so at the end picked up Bergara B14-R (steel) closest to voodoo i can get in europe, I like big boys size of magazines, its quite good... so far it likes GECO 22LR rifle... (1111 Fps) Cant compare to any other rifle, but i am very satisfied... 10 shot group, one hole of approx. 1.5 cm in diameter.. I find better test to be BR50 standard target... I get mostly 10 and 9, occasional 8 (could be due to different angle of the rows... Shooting through A-TEC Wave carbon and its outside hearing safe, even for supersonic ammunition.

real question time why shoot at a dash instead of a dot or x mark?

Mine loves SK Biathlon.

Put mine in a krg bravo chassis, shoots the same hole at 50 yards with eley club, for the money it's an insanely accurate rifle.

Thats one dirty bolthead geees😅 10:50 Great review tho, thanks!

CCI Standart Velocity 1070 the best for money for Tikka T1X

@aidenanawak696

Ай бұрын

Same stuff I use in my 457 groups very very well

@igorchumakov7584

Ай бұрын

@@aidenanawak696 I congratulate you, but this is not an answer on the topic of the release on the channel

@keithcarney1097

Ай бұрын

Just bought one of these here in Ireland last month. Still breaking in the barrel and with the cci sv, getting sub moa at 50m on the range. I’ve still bought a few of the ammo on this list to test though. That’s part of the fun 😀

@k2svpete

Ай бұрын

For training ammo. You wouldn't shoot a PRS or NRL match with it.

@EpikArms

Ай бұрын

yep best value for the money, but considering you only need 100 round for a match its worth bringing the good stuff. my last matches the stores were out of what my rifle liked so i had to used CCI SV and i performed middle of the pack. then again even if the ammo was partially responsible i dropped the ball on a whole stage..... sooo

Great, unbiased review as always. Wish I has 21 different types of 22 ammo to try...😢😢

@EpikArms

Ай бұрын

if you are in canada reach out to Tesro . ca

Nice review. What couple of scopes would you recommend for an M40A5 I'm assembling. It'll be a full custom. I'll be reloading my own 308 match ammo that *should reach 1000-1200 yards before going trans sonic. Obviously, this isn't a hunting/plinking rifle lol. That being said, I'm looking for a higher end scope. I'm budgeting about $2500 max for it.

@UltimateArms

Ай бұрын

a tract toric elr is a great choice!

@blackhawk2302

Ай бұрын

@@UltimateArms That's one of the scopes I was looking at. Along with the Sig Tango6 5-30. I like their Levelplex idea. Also looking at the Leupold Mk 5. Decisions decisions lol. I was wondering what else is out there I'm not thinking of. I really like the Vortex Razor and Element Theos, but $3,000 is pretty steep.....

@UltimateArms

Ай бұрын

@@blackhawk2302 nice but not 300$ nice LOL. i use the elr tract. nice scope $2000 i think canadian! use it for precision shooting myself on a custome rifle this weekend!

@blackhawk2302

Ай бұрын

@@UltimateArms Nice! Good luck this weekend. I'll take another look at the Tract

@dbowen22

Ай бұрын

Vortex 6-36 hands down.

👍👍👍

Maybe I missed it, but what is the distance when you test?

@EpikArms

Ай бұрын

This is all at 50m

whats with the mic??

@EpikArms

Ай бұрын

is it that bad?

I hope these groups are at 100!

@EpikArms

Ай бұрын

50 is standard for rimfire

Now please do it again with the 17HMR-Version with 20" Barrel 😂

@ericlafrance6350

Ай бұрын

I have both 17hmr and 22lr and am not too impressed with the 17hmr accuracy and feeding.

@Mex_the_Fox

Ай бұрын

@@ericlafrance6350 accuracy is ok-ish, or unacceptable? When did you feeding issues start? Right from the beginning or later?

@Mex_the_Fox

Ай бұрын

@@ericlafrance6350 what ammo did you try and did you clean the barrel?

@ericlafrance6350

Ай бұрын

It's acceptable, not a tack driver, and i tried many types of ammo. Hornady 17gr cci a17, gamepoint, and cci fmj have been the only ones without accuracy issues. I also clean my barrel often and the proper way. Feeding is the casing neck that catches the edge of the barrel. Tikka redesign them im not sure if the issues are solved on the new model. My most accurate 17hmr was savage b17 F, but quality is not there like Tikka ... I hope that helps. The Tikka is not a deal breaker.

@Mex_the_Fox

Ай бұрын

@@ericlafrance6350 thank man, appreciate it! Tikka is already ordered!

15:19 I thought you were reviewing a T1X not a T3X? Bwahahahahahaha! Where do you recommend getting some spare firing pins from?

@EpikArms

Ай бұрын

lol i needed good B-Roll for the scope and didnt have any on that rifle.s so i just usedsome from a differentrifle review

Unfortunately this kind of testing is ironious if you don't season the barrel with a few dozen rounds of the next ammo test ammo. If you don't season the barrel each time you do an ammo change, you'll end up with the hodgepodge results through out the testing you got yourself.

@mikaoj27

Ай бұрын

2:38

ANOTHER "REVIEW" BY SOMEONE NOT EVEN QUALIFIED TO EVALUATE A TOY GUN

@RS-dc7wy

Ай бұрын

How so? Please provide a link to your videos for comparison.

@EpikArms

Ай бұрын

hi James, thanks for commenting. Im pretty good at taking critisim. what do you think i need to do better? im always trying to make my reviews the very best.

Anytime you switch ammunition in a rimfire you need to shoot about 10 shots through it to get the wax from the different ammunition types in the barrel. I noticed quite a few ammo types where one group was larger than the other 2. Maybe that larger group was the first group through the rifle after switching ammo!?

@mikaoj27

Ай бұрын

2:38

@EpikArms

Ай бұрын

hi Joe, yes i 100% agree. thats something I already do. I do 10 shots off the filmed paper, then 3x 10 shot groups that are on paper. im still stumped why even my "best groups with this rifle had 2 grpoups that were great and one sob par. i will be redoing this test with this gun with a chassis for a chassis vs stock video with the MDT XRS chassis