wheel bearing tightening and fixing Mercedes S212 and w212 E class
Жүктеу.....
Пікірлер: 12
@avneetkainth9816 Жыл бұрын
Excellent video. I had one of my bearings adjusted around 6 months ago on my Mercedes C207 as I had a vibration coming through my steering wheel but the guy just tightened it up. Then a month ago I had the other side adjusted by a mercedes specialist and he adjusted it similar to how you done it. I did tell the specialist what the other garage had done but he said it should be ok. Hopefully I won't have any problems with my bearings anytime soon.
@chzx88able
Жыл бұрын
It's good to help people 🙂👍
@skunkpowergarage Жыл бұрын
You did it wrong! The bearing must have a play of 0.01 mm, that means that you do not have to tighten the nut all the way ant then loose it a little bit. You need a special tool to set that 0.01mm play otherwise you will destroy the bearings. The tool is called dial indicator with magnetic base
@chzx88able
Жыл бұрын
This video was only to show how you get there 🙂 I did not say anything about how much nm you have to do. Anyway if you know how to do it you don't need any special tool. My car still drive perfect ❤️ I doo get your point, som I'm happy for your reply 🙂
@matsmoden79432 жыл бұрын
no grease in the cap! it can loose then!
@chzx88able
2 жыл бұрын
Moose on the loose 😉
@beckhanaydi89172 жыл бұрын
Hvorfor tetter du?
@chzx88able
2 жыл бұрын
Hei 🙂 Hva mener du? Kan du forbedre spørsmålet ditt?
@beckhanaydi8917
2 жыл бұрын
Hvorfor strammer du hjullager ? Var det kast på bil eller vibrasjon ?
@madleneustice38502 жыл бұрын
🄿🅁🄾🄼🄾🅂🄼 ✋
@chzx88able
2 жыл бұрын
What do you mean by that?
@yammydodger19888 ай бұрын
This guy has no clue of how to adjust a Mercedes wheel bearing correctly, you should use a dial indicator gauge and adjust the bearing to 1000 of an inch, you cannot just 'guess' it, this bearing will burn out very quickly.
Пікірлер: 12
Excellent video. I had one of my bearings adjusted around 6 months ago on my Mercedes C207 as I had a vibration coming through my steering wheel but the guy just tightened it up. Then a month ago I had the other side adjusted by a mercedes specialist and he adjusted it similar to how you done it. I did tell the specialist what the other garage had done but he said it should be ok. Hopefully I won't have any problems with my bearings anytime soon.
@chzx88able
Жыл бұрын
It's good to help people 🙂👍
You did it wrong! The bearing must have a play of 0.01 mm, that means that you do not have to tighten the nut all the way ant then loose it a little bit. You need a special tool to set that 0.01mm play otherwise you will destroy the bearings. The tool is called dial indicator with magnetic base
@chzx88able
Жыл бұрын
This video was only to show how you get there 🙂 I did not say anything about how much nm you have to do. Anyway if you know how to do it you don't need any special tool. My car still drive perfect ❤️ I doo get your point, som I'm happy for your reply 🙂
no grease in the cap! it can loose then!
@chzx88able
2 жыл бұрын
Moose on the loose 😉
Hvorfor tetter du?
@chzx88able
2 жыл бұрын
Hei 🙂 Hva mener du? Kan du forbedre spørsmålet ditt?
@beckhanaydi8917
2 жыл бұрын
Hvorfor strammer du hjullager ? Var det kast på bil eller vibrasjon ?
🄿🅁🄾🄼🄾🅂🄼 ✋
@chzx88able
2 жыл бұрын
What do you mean by that?
This guy has no clue of how to adjust a Mercedes wheel bearing correctly, you should use a dial indicator gauge and adjust the bearing to 1000 of an inch, you cannot just 'guess' it, this bearing will burn out very quickly.