Tighten RC Nuts and Bolts

Тәжірибелік нұсқаулар және стиль

Check out our line of wing bags and windsocks!
www.flyingrcstore.com/

Пікірлер: 17

  • @I_am_archie
    @I_am_archie Жыл бұрын

    Thanks 🛩️

  • @randolphcatchot5421
    @randolphcatchot54216 жыл бұрын

    And for all those out there who think that's too much trouble, look @ it from the prospective of someone who is picking up the piece's of their broken airplane, if you could go back and tighten some bolt's to avoid crashing your beautiful plane would you do it, in most case's most people would say hell yes, and that's the point I'm trying to make is that checking thing's and good maintenance habits go a long way...

  • @treyu8117
    @treyu81173 жыл бұрын

    I noticed the Anderson rc stickers do you happen to be in NC?

  • @flyingrcdotnet

    @flyingrcdotnet

    3 жыл бұрын

    Yes I am

  • @treyu8117

    @treyu8117

    3 жыл бұрын

    @@flyingrcdotnet just wondering I am as well and go by Anderson fairly often as does happen in this hobby

  • @CARIDEO
    @CARIDEO3 жыл бұрын

    Where can I purchase that motor shaft hub/adapter(4 bolt) to connect the propeller to? Please help!

  • @flyingrcdotnet

    @flyingrcdotnet

    3 жыл бұрын

    That is part of the engine, not an aftermarket piece.

  • @robertjones1855
    @robertjones18553 жыл бұрын

    Where do you get the rubber coated washers?

  • @flyingrcdotnet

    @flyingrcdotnet

    3 жыл бұрын

    RTL fasteners www.rtlfasteners.com/RC/bw.html

  • @papasplanes.956
    @papasplanes.956 Жыл бұрын

    I just picked up the same Hanger 9 Extra 260 that's in your video opener. With a DA50 Would you happen to know what size stand off is in yours. mine are 2.5 in and the prop hub doesn't clear the cowl. Any help would be appreciated.

  • @flyingrcdotnet

    @flyingrcdotnet

    Жыл бұрын

    That was an Aeroworks Extra and I don't have a clue what the standoff length was. I probably didn't know the actual dimension then either as i just keep shimming it somehow until I get it right, then I leave it alone. Aeroworks used to give us a bag of 1/4"-thick aluminum spacers that always came in handy.

  • @papasplanes.956

    @papasplanes.956

    Жыл бұрын

    @@flyingrcdotnet ok thanks. debating between a longer standoff vs adding washers. The plane has never been flown which is why this wasn't addresed by the previous owner.

  • @dennishickey2528
    @dennishickey25284 жыл бұрын

    Go wait on the bus! Lol

  • @robertjones1855
    @robertjones18553 жыл бұрын

    Could you please list the company’s where you got your bolts described in this video. Thanks

  • @flyingrcdotnet

    @flyingrcdotnet

    3 жыл бұрын

    www.flyingrc.net/rtlsrvoscws.html My go-to people for anything fastener.

  • @WillSr70
    @WillSr706 жыл бұрын

    Hello my friend,do you have an email address?I have a question about the saito 125 glow engine.

  • @TSODInc
    @TSODInc8 жыл бұрын

    Split washers are pure garbage, try? nord-washers

Келесі