Sailing Directly Into the Wind - Is it Possible?

Ғылым және технология

Click betterhelp.com/rctestflight for 10% off your first month of therapy with our sponsor BetterHelp.
Create a free Onshape account: onshape.pro/rctestflight
Rotary Sail CAD: cad.onshape.com/documents/917...
Follow rctestflight on Instagram: / rctestflight_
Support rctestflight: / danielriley
MB01NPQWTMUQ76I

Пікірлер: 2 100

  • @HigginsIam
    @HigginsIam4 ай бұрын

    Was really curious where this video was going when you showed the bottom view of the hull on the intro

  • @johnjuiceshipper4963

    @johnjuiceshipper4963

    4 ай бұрын

    He’s getting better and better at grabbing the viewer’s attention.

  • @RavenY2K3

    @RavenY2K3

    4 ай бұрын

    😂😂

  • @Grzechu92

    @Grzechu92

    4 ай бұрын

    I wonder how this specific hull shape and perspective would perform as a video thumbnail :D

  • @JMMC1005

    @JMMC1005

    4 ай бұрын

    That colour choice was no accident.

  • @iteerrex8166

    @iteerrex8166

    4 ай бұрын

    Not a single guy missed that 😂

  • @BonesyTucson
    @BonesyTucson4 ай бұрын

    LOL those first few frames of the video sure didn't look like a sailboat. Seriously though, your engineering and building skills are next level and something for folks to aspire to. Love it.

  • @scroopynoopers2892

    @scroopynoopers2892

    4 ай бұрын

    lmao, he knows what hes doing

  • @Ithirahad

    @Ithirahad

    4 ай бұрын

    hullussy

  • @BrucePotter

    @BrucePotter

    4 ай бұрын

    But his physics are below par. Cursory mathematical modelling shows this concept simply isn't as efficient as a traditional sailboat.

  • @bowfuz

    @bowfuz

    4 ай бұрын

    i was so afraid i was alone here XD

  • @lordjeffery10

    @lordjeffery10

    4 ай бұрын

    @@BrucePotter Damn it's almost like the point was to sail DIRECTLY into the wind and not make a sailboat

  • @philliprobinson7724
    @philliprobinson77243 ай бұрын

    Hi. This was first done in the 1950's, "Popular Mechanics" did a model rotary-sail boat. The big problem with these things is they sit in water which being fluid allows the boat to go awry. When the "drag" on the windmill exceeds the "thrust" of the underwater propeller the "radio control" becomes purely theoretical. I redesigned it as a little four-wheel cart. My thinking was that with positive contact with the concrete it couldn't go off on its own. The drive wheels were geared down using a rubber turn-table belt twisted through 90 degrees, so the windmill did a lot of spinning to produce a top speed that would only have a snail hanging on for dear life. It always worked well until the belt ran off the top pulley! Made today using model bevel gears it would be quite possible to make a steerable wind powered cart in which the windmill always faces directly into the wind by using a tail-vane. Slow motion races around a tennis court could become the next "geek" sport. Cheers, P.R.

  • @smartereveryday
    @smartereveryday4 ай бұрын

    Beautiful video

  • @DeLewrh

    @DeLewrh

    4 ай бұрын

    Of course you're here, love your videos man

  • @dragonfire2371

    @dragonfire2371

    3 ай бұрын

    How doesnt this comment have a thousand replys hahaha

  • @Maungateitei

    @Maungateitei

    3 ай бұрын

    Maybe because it was a scam that anybody sailed faster than the wind downwind.

  • @reidgideon8337

    @reidgideon8337

    3 ай бұрын

    you make beautiful videos!

  • @roboman2444
    @roboman24444 ай бұрын

    One of those "vertical-axis wind turbines" would be interesting. Would simplify the gearing at least. Doesn't matter what direction the wind is going too, so no mechanisms for pivoting.

  • @NGC1433

    @NGC1433

    4 ай бұрын

    Vertical axis wind turbines are as close to "free energy" as you can get without actually claiming free energy as ever possible. They have absolutely abysmal percentage of harvested wind energy from available wind energy. They have huge wind surface and only a fraction of that grabs wind. The rest is just a useless wall, which in case of a boat - would behave like a giant parachute.

  • @clivestainlesssteelwomble7665

    @clivestainlesssteelwomble7665

    4 ай бұрын

    Its been done check out rotor sail craft and wingsails also flesnor rotors.. for shipping . Also biplane wingsail catamarans 🇬🇧🧙‍♂️

  • @exo068

    @exo068

    4 ай бұрын

    ⁠​⁠​⁠​⁠​⁠​⁠@@NGC1433not really true, the Darrieus designed is only a little less efficient than the commonly used horizontal axis designs since it’s not a design reliant on resistance. You can also get higher output per area compared to a horizontal one since they need less space.

  • @meldert

    @meldert

    4 ай бұрын

    Like the trimaran in water world. ;)

  • @ET_AYY_LMAO

    @ET_AYY_LMAO

    4 ай бұрын

    @@NGC1433 Hybrid designs such as Darrieus can get 39% efficiency, but yeah compared to HAWTs 59% in ideal circumstances, its not "better" than HAWTs, however they are a lot less complex to operate. I build a few Vertical axis turbines in miniature scale (approximately 1m high and 20cm radius) and while it does not power a house or anything it was more than enough to drive night lighting in my garden and it was handy to have some 12v power at the other end of the estate for garden work. It charged batteries no problem. I have to add the disclaimer that I lived on top of a hill and it was extremely windy where I lived. I think it maxxed out at 50w power generated in a storm lol, not more than that for sure. I think it should be doable to do this with a VAWT too, the remaining 59% of the energy is not directly causing drag or otherwise countering forces neccesarily. A VAWT can also have collapsing blade design that theoretically "beats" the betz limit in the sense that the collapsed blades does not cause drag or reduce power generated, though these designs are very impractical at scale, they perform brilliantly at small scale.

  • @vincentdesjardins1354
    @vincentdesjardins13544 ай бұрын

    If you want to push this experiment forward I think you need to explore both : - variable and remotely controlable pitch for the wind blades (so it can adapt to diferent wind velocity and/or point of sail) - axial rotation of the water propeller to make it act as a rudder (more authority at low speed than a regular rudder) - definitely add some keels on the hulls to ake it less "floppy"

  • @vovanikotin

    @vovanikotin

    4 ай бұрын

    also add some gears ratio, wind gear bigger than water propeller. The same as Veritasium shows in his video about moving faster than downwind

  • @framegrace1

    @framegrace1

    4 ай бұрын

    @@vovanikotin Changing the pitch on the blades have the same effect, as changing gears. But actual gearing is maybe easier to change while experimenting.

  • @gshaindrich

    @gshaindrich

    4 ай бұрын

    gotta literally "push forward" or it won´t move "directly" against the wind...

  • @jaumesinglavalls5486

    @jaumesinglavalls5486

    4 ай бұрын

    also the wind blades, cannot be a plane, since the center moves slower that outside, this provocate drag, since the tip of the blade wishes to move faster than the center, and this mades the eficiency to go down. Also, another thing that I would like to see is with a vertical wind turvine and/or a wind turbine like the archimedes Liam F1 (I think is the name) One last point, is that there was a new propeller dessign (I think was the toroidal or similar), that apparently was more efficient...

  • @costasvrettakos

    @costasvrettakos

    4 ай бұрын

    Also a reverse gear would make it go faster than the wind going downwind!

  • @Aengus42
    @Aengus423 ай бұрын

    Yup! You got my attention at 00:02. Made me think "I bet it'll be eady to find the man in the boat this time, it's RCTestFlight!" 😆

  • @o00nemesis00o

    @o00nemesis00o

    Ай бұрын

    It's a shame, because he lost my attention at 00:01

  • @largo6644
    @largo66443 ай бұрын

    Good work !!! In 2000 or 2001, when I sailed a lot, in a sailing magazine I read an article talking about sailing 0° upwind, with an "apparatus" like yours. I remember this performances: it sails 5 kts upwind with 13 kts of down wind. Greetings fron Argentina !!!

  • @grahamsnyder762
    @grahamsnyder7624 ай бұрын

    Rather than increasing the propeller diameter, would it not make more sense to design the gearing so that it spins faster than the turbine instead of 1:1?

  • @johnsmith-jq1uc

    @johnsmith-jq1uc

    4 ай бұрын

    surely

  • @jayknight139

    @jayknight139

    4 ай бұрын

    that's what I was thinking

  • @gavinausten1825

    @gavinausten1825

    4 ай бұрын

    Also my first thought. Was gonna add a comment if I didn't see this one.

  • @monstamastarc

    @monstamastarc

    4 ай бұрын

    I have a feeling a bigger prop is more efficient than the extra mechanical losses from a gearbox. I could be wrong though

  • @bear8046

    @bear8046

    4 ай бұрын

    Seems like the additional gearing and touch points required could make it not as efficient as increasing the prop size, maybe.

  • @justinklenk
    @justinklenk4 ай бұрын

    5:59 - I do so love that completely accurate project curve graph... 😅 👍

  • @couttsylives
    @couttsylives3 ай бұрын

    Your "Project Curve" is brilliant...seriously!!! I might have to get it printed out and stuck on my wall. (with attribution of course!)...Thank You

  • @grantclark4139
    @grantclark41393 ай бұрын

    I love when you do projects like this, the goofy propulsion projects that aren't going to change the way people do things but are still amazing accomplishments. Well done!

  • @edgarjoffre8838
    @edgarjoffre88384 ай бұрын

    I think you could use the bevel gear to increase the ratio between the turbine and the propeler, so that the propeler would turn faster. In my opinion (but I am not an expert in this), it would be more efficient to have a fast turning propeler with a slow turning wind turbine. Also, I think having the mast turn with the blade insted of the boat would reduce the drag of the boat

  • @jamesscheidler476

    @jamesscheidler476

    4 ай бұрын

    I agree. Couldn't one develop gear ratio that leverages the huge torque-- like the wind turbine farms. I am no engineer so I can't offer anything more than an idea.

  • @waxt0n

    @waxt0n

    4 ай бұрын

    bevel gears are very inefficient in terms of energy transfer, but gears/belts/chains moving between two horizontal shafts could be interesting

  • @michaeldunn8876

    @michaeldunn8876

    4 ай бұрын

    The same effect can be achieved with less losses by adjusting the ratio of the size between the turbine and propeller - I suspect Daniel has already considered this and used it to size the water propeller.

  • @dustinbrueggemann1875

    @dustinbrueggemann1875

    4 ай бұрын

    @@waxt0n It would significantly hamper the rotational freedom though. Bevel gears have a built in slip-ring capability, but belts would need some kind of intermediate transfer, which negates most of their advantages.

  • @Nick1112able

    @Nick1112able

    3 ай бұрын

    I also have the feeling that the slower the wind turbine turns, the more drag it will create

  • @SapioiT
    @SapioiT4 ай бұрын

    The funny part is that, the way you made the boat, the way to go against the wind is to rotate the boat (and the wind turbine blades) backwards, because of the drag created by the blades of the wind turbine. Putting the drag in front of the center of mass and center of thrust only helps destabilize the system, which is why it seems to be so stable while it's "facing the wrong way", at 8:00 to 8:30.

  • @KevinDC5
    @KevinDC54 ай бұрын

    I love watching your building processes, it gives me inspiration for techniques I can use in my own designs. Cheers! from Texas

  • @alainblanchard5808
    @alainblanchard58083 ай бұрын

    Brilliant project, I like it very much. It reminds me of crazy drawings that I was doing in the 80's trying to find a way to move sailing boats upwind more efficiently

  • @SoHaRdCrAzzY2
    @SoHaRdCrAzzY24 ай бұрын

    I see what you did there at 0:02. The color matches perfectly. :D

  • @EDCandLace

    @EDCandLace

    3 ай бұрын

    100% he showed the toochie.. I mean keel lol

  • @reedreamer9518
    @reedreamer95184 ай бұрын

    Literally tears squirting out (5:54) - "Trough of Despair" to "Scam ignorant investors"!

  • @Nick1112able
    @Nick1112able3 ай бұрын

    You’re my favourite KZreadr by far. Your quirky shots of turtle shells, floating bottles and such that you always have are totally irrelevant and therefore genius, they show your sense of discovery and curiosity for the anodyne. I also love your harbour shots and the graph showing scam innocent investors!

  • @arthurjennings5202
    @arthurjennings52023 ай бұрын

    So you remember Keven Costner's sail boat in the movie "Waterworld" released in 1995. The trimaran used a three bladed Darrius wind turbine and sails. Your project will work with a vertical turbine, but when you sail downwind, the craft will be slower than pure sail.

  • @philipsmeeton

    @philipsmeeton

    3 ай бұрын

    Just turn the turbine blades in the opposite direction so that the behind wind drives the turbine.

  • @not_a_therapist

    @not_a_therapist

    3 ай бұрын

    Darrius turbine is a vertical axis turbine. You don't have to @@philipsmeeton

  • @retiredjan4714

    @retiredjan4714

    3 ай бұрын

    @@philipsmeeton what means you need a servo system to set the blades (think of helicopter) and it gives extra friction.

  • @assetstacker
    @assetstacker4 ай бұрын

    00:02 bros got to be trolling hahahha

  • @TexMex421
    @TexMex4214 ай бұрын

    Awesome video. I had a beautiful 1 meter RC sailboat for a few years. The best thing I ever did was add a small electric motor shaft and prop. The ability to bring it back to me was great.

  • @Dblackarialallstars
    @Dblackarialallstars3 ай бұрын

    Thank you so much for all your gerea content!My top 5 favorite channels!!!

  • @JakobusVdL
    @JakobusVdL3 ай бұрын

    Wow! that is different level DIY. An innovative idea, and amazing engineering and tools to trial it, and the explaination of the physics - very impressive in so many ways.

  • @timeonly1401
    @timeonly14014 ай бұрын

    I LOVE, LOVE, LOVE seeing personal applied physics and engineering. This nakedly demonstrates human ingenuity & creativity applied to problem solving. More, please! ❤

  • @thesoupin8or673
    @thesoupin8or6734 ай бұрын

    For your wind vane, you might be able to maintain effectiveness and reduce drag by increasing the length of the lever arm. A smaller vane placed farther back along that shaft could provide similar leverage without so much drag. Great video though! Love anything boat-related

  • @jumpsneak
    @jumpsneak3 ай бұрын

    "Scam ignorant investors" (5:57) I can't xD

  • @thomaspage334
    @thomaspage3343 ай бұрын

    i design a boat with this propulsion method as a senior at UMaine in mechanical engineering. I met with a guy who built a working prototype and went for a sail. my calcs showed his independent design was close to optimum.

  • @Leo99929
    @Leo999294 ай бұрын

    An aerodynamic profile on your wind turbine blades should make a huge difference because the flat blades you have might only be achieving a L:D ratio of maybe 6:1 whilst a good aerofoil could have in the order of 20x that.

  • @ToastyMozart

    @ToastyMozart

    4 ай бұрын

    At low Reynolds numbers the difference isn't usually that drastic, but yeah 10:1 seems a bit optimistic.

  • @gary6449

    @gary6449

    4 ай бұрын

    All the effort(s) with designing for "efficiency" and then using such an inefficient (non-airfoil) wind turbine design ???

  • @nickchristie2221

    @nickchristie2221

    3 ай бұрын

    ​@@gary6449 gary has got it right. Blackbird works better because of the aerofoil design of the blades. The flat blades just provide a deflective pushing force and a heap of drag , rather than the suction like force from an aerofoil

  • @tehZevo_
    @tehZevo_4 ай бұрын

    Even though they're less efficient, what about using a vertical axis wind turbine (or turbines!) to drive the prop (or props), since it would require 1 less beveled gear set and the turbine assembly wouldn't have to "turn into" the wind?

  • @reezlaw

    @reezlaw

    4 ай бұрын

    Good idea

  • @TerraCAD

    @TerraCAD

    4 ай бұрын

    The losses due to beveled gears can be lower than 2% when produced well the typical difference of efficiency between Vawt and Hawt is around 20 % though I would find it interesting as well it will probably work even worse

  • @blubb7711

    @blubb7711

    4 ай бұрын

    3D printed plastic bevel gears are nowhere near 98% efficient, even metal once don´t get 95%. I would guess they are like 80% efficient.@@TerraCAD

  • @exo068

    @exo068

    4 ай бұрын

    @@TerraCADthat doesn’t take into account that you can put more vertical ones on the same space a horizontal one needs.

  • @renaissanceman5847

    @renaissanceman5847

    4 ай бұрын

    less efficient ... but also alot more drag.

  • @kirkknestis9918
    @kirkknestis99183 ай бұрын

    Love the videos and engineering conversations. Playing "Where is he on Lake Washington?" as a ex-Seattleite is a bonus.

  • @larrybremer4930
    @larrybremer49303 ай бұрын

    I used to do a lot of sailing and can say that the best point of sail is the beam reach where efficiency of converting the apparent wind direction and energy into forward motion over the Earth. keep in mind that as the sailboat gains speed the apparent wind direction changes forward more so beam reaches in reality end up being slight downwind in actual movement direction when the apparent wind is exactly 90 degrees off the beam. Sailing with the wind will seem slow but usually waves and surface water flow is in the same direction so even though its not as efficient (in most modern sailboat rigging schemes) you are still making good headway. When close hauled you will feel like your really moving with the wind in your face and waves crashing under the hull but in reality the drag of the sails and hull against the waves are now directly counteracting against your direction of motion making it a slower point to sail. Tacking further reduces your efficiency because your not traveling the desired course in a straight line (the actual distance your covering will be at least 33% greater than the straight line into the wind). Also a correction that the sails fully provide forward force. In fact its an interaction where the hull of the boat, either by keel or dagger board will prevent the boat from too much leeward slip. The best analogy is like squeezing a watermelon seed in your fingers and it shoots out blunt end first because the forces your exerting only have one direction of relief and that is out. Similarly the sailboat being pushed to the side does not want to go that direction so the direction it does go ends up being forward. Lastly the mechanical efficiency of the wind turbine/propeller is never going to be as practical as sticking with sails with many of the reasons illustrated in your experiments. Given an RC sailboat and the turbine powered boat the sailboat would have handily beat the turbine boat in a race. Also if you did this in full scale I would not want to be on the deck of a boat with those massive turbine blades spinning over my head. The thought of that and how bad an accident or failure would be is simply too horrifying to contemplate for long.

  • @dark_angel777

    @dark_angel777

    3 ай бұрын

    Not forgetting, tide is king and wind is queen.

  • @FPVenius
    @FPVenius4 ай бұрын

    The right edge of the project curve made me lol. Thanks for continuing to push on weird projects like this; I always enjoy them!

  • @millok4
    @millok44 ай бұрын

    My idea on solving the screw being too slow is to connect the rotor sail and the screw with a remote controlled CVT and test the optimum gear range. After you get the data and find the gearing solid, magnetic gear couplings might help since both input and output shafts can be placed diagonally (to save weight and space), also theoretically less friction.

  • @malloot9224

    @malloot9224

    3 ай бұрын

    Cvt might be essential in getting peak efficiency in all angles. Pretty hard to make tho

  • @FraLin

    @FraLin

    3 ай бұрын

    Running a generator and a motor would be cheaper and more efficient than these gears

  • @kierancarter3693

    @kierancarter3693

    3 ай бұрын

    great idea

  • @SteeveEfnet
    @SteeveEfnet4 ай бұрын

    Pretty awesome that you share your build files. thank you

  • @KraussEMUS1
    @KraussEMUS13 ай бұрын

    Great project and very well engineered!! I'll bet with enough engineering it could compete with standard sailboats when sailing into the wind, since it doesn't have to tack. If the streamlining were developed enough and perhaps if it were combined with hovercraft or hydrofoil technology to eliminate drag, it is likely possible. Incidentally, I have a series of ion thrusters on my channel, that are patented for lifting themselves and their power supplies against gravity!

  • @Havakadoo
    @Havakadoo4 ай бұрын

    I always look forward to your videos. Keep up the great work

  • @DestructorEFX
    @DestructorEFX4 ай бұрын

    Why didn't you increase the gear ratio so that the propeller spins faster?

  • @user-jm8sy5ox2j

    @user-jm8sy5ox2j

    4 ай бұрын

    You introduce mechanical loss when using more gears so it is more efficient to just use bigger propellers

  • @Prolly_tyler

    @Prolly_tyler

    3 ай бұрын

    ​@user-jm8sy5ox2j you wouldnt add more gears. Youd just make gears with more and less teeth in order and replace the existing gears with the new ones

  • @topspeed250k5

    @topspeed250k5

    3 ай бұрын

    ​@@user-jm8sy5ox2jyou got the wrong idea. Increasing gear ratio doesn't mean adding more gears

  • @Somerandom1922

    @Somerandom1922

    2 ай бұрын

    Larger prop is functionally a higher gear ratio.

  • @III_IV
    @III_IV3 ай бұрын

    I always wondered if this was possible. Great build!

  • @StubProductions
    @StubProductions3 ай бұрын

    Great design work!! A lot of fun to watch

  • @pomeroy600287
    @pomeroy6002874 ай бұрын

    I've been designing one of these for a while now, my first attempt (I have a couple of videos) performed similar to yours. You should read the documentation given in Optimal Blade Design for Windmill Boats and Vehicles by B. L. Blackford (1982), that is chiefly about the design of turbine powered boats, and gives some numbers as well as known-functional blade design offsets. There is also (amongst others) the vessel Falcon, previously part of the National Maritime Museum in Irvine, Scotland, which was a full-size boat powered by this method. The comments on higher aspect ratio propeller and more efficient (non-planar) turbine blades are spot on, and also what I've been working on with my double-size V2 design. My version one design used a cam-pitch linkage to change the pitch of the blades depending on the direction of the hull relative to the wind, but I ditched this temporarily after realising that I had more elementary problems to overcome first. V2 is ready to go, and I'm currently awaiting a nice windy day to run some tests!

  • @WindThrusters

    @WindThrusters

    4 ай бұрын

    Don't rely too much on the Blackford report - some of it is wrong.

  • @3DProjectsRC
    @3DProjectsRC4 ай бұрын

    Amazing graph of a project. I can definitely relate to my own projects. Also a amazing video about this really cool design, I really enjoyed it!

  • @GlenB1963
    @GlenB19633 ай бұрын

    I was thinking about this project. It seems to me that, provided the prop is producing ebough torque, increasing the diameter of the water prop and, upping the gearing to 5-1. I d love to see if possible, also twin screws perhaps. Great videos. I absolutely love them.

  • @danieltroger1761
    @danieltroger17613 ай бұрын

    Thank you for using metric units, makes it so much easier to understand than other US-based youtubers

  • @victor-charlesscafati
    @victor-charlesscafati4 ай бұрын

    I believe that the 45° air propeller pitch is probably optimal for the same reason that a beam reach is the fastest point of sail on a sailboat (where the wind is at a 45° angle to the sail). Interesting project.

  • @TerraCAD

    @TerraCAD

    4 ай бұрын

    I don't know about sailboats but something about wind powered cars and the optimal pitch angle is dependent on blade profile and wind speed so this is not necessarily false but having adjustable pitch control is pretty necessary for good performance with different wind speeds

  • @vinny142

    @vinny142

    4 ай бұрын

    "(where the wind is at a 45° angle to the sail). " The most optimal is to have the wind blow directly into the sail from behind the boat, so zero degrees. If the wind comes from the side at 90 degrees to the ship, the optimal angle really depends on the type of sails that the ship has. Sails don't just deflect the wind, they provide thrust too so the deflection angle is not really the most important factor. It's fascinating stuff, worthy of a deep dive.

  • @victor-charlesscafati

    @victor-charlesscafati

    4 ай бұрын

    @@vinny142 That is not correct. If the wind is behind a sailboat, the maximum speed it can achieve is the speed of the wind (unless you get into this fancy propeller stuff, which is a different topic.) Having the wind behind the sailboat (which is called a run, as you may know) is the *slowest* point of sail (aside from sailing directly into the wind in the no-sail zone). The fastest speeds a sailboat can achieve is at a beam reach, at which the sail is set at 45° degrees to the wind. My point stands-the reason he was seeing an optimal performance at 45° of propeller pitch is exactly the same reason a sailboat goes the fastest when the wind is coming 90° from the direction the boat is facing and the sail is set to 45° degrees to the wind. If you still disagree with me, let's go racing sometime. :D Welcome to the "people correcting people incorrectly club" @vinny142.

  • @cactus445566

    @cactus445566

    4 ай бұрын

    @vinny142 Beam reach (wind 90 degrees to the boat) is much more efficient on modern craft than downwind. Going downwind you're using the sails to produce drag, and as you go faster the relative wind decreases. In a beam reach you're using the sails to produce lift, and the force generated is very close to the direction you're going, and as you go faster the relative wind doesn't decrease

  • @adrianschmidt5564

    @adrianschmidt5564

    4 ай бұрын

    Yeah you should take a dive into the stuff :)@@vinny142

  • @keithdubose2150
    @keithdubose21504 ай бұрын

    I think a twin - counter rotating prop set up would help with directional stability. You could also run a shaft inside each hull.. reducing drag. I think you are on the right track with higher aspect ratio water props Great video !

  • @massmanute
    @massmanuteАй бұрын

    This answers one of the questions I have been wondering about.

  • @marat61
    @marat613 ай бұрын

    I have great time watching this, very calming.

  • @kotori87gaming89
    @kotori87gaming894 ай бұрын

    I hope you continue with the traditional sailboat design. I'm especially interested in an autonomous sailboat that can automatically tack, wear, and perform all other normal sailing maneuvers to reach any desired destination.

  • @rydenkaye9735

    @rydenkaye9735

    4 ай бұрын

    damn we got an old timer over here. wearing is for square rigged boats gramps all the cool kids call it gybing now and have for decades

  • @kotori87gaming89

    @kotori87gaming89

    4 ай бұрын

    ​@@rydenkaye9735​You kids get off my lawn! *shakes fist menacingly* Wow, I didn't think anybody would notice that. But yeah, I would love to at least partially automate my R/C USS Constitution.

  • @whatsthematter8767
    @whatsthematter87674 ай бұрын

    Daniel, I think that's called a propellor 🤣, all in all though, cool video! I can't wait to get more updates on the Flik wing aswell!

  • @boutrosboutrosboutrosboutros
    @boutrosboutrosboutrosboutros3 ай бұрын

    fantastic video. I love youtube how you guys work together. subbed

  • @PeterRobertson79
    @PeterRobertson794 ай бұрын

    Glad you credited Rick Cavallaro. He made a post about this on the rcheli forums way back in the day which sparked much debate. That lead to him doing the treadmill demonstration and ultimately the Veritasium video. He went by the name Spork back then if I recall correctly.

  • @PeterRobertson79

    @PeterRobertson79

    4 ай бұрын

    I think he developed the TV overlay tracking for hockey-pucks. Not sure if he was the first. I do know that he built a boat out of wire and duct-tape just for fun.

  • @paulmakesthings
    @paulmakesthings4 ай бұрын

    That's awesome. I really enjoyed this video. I wonder if trying a few different gear ratios between the sail and drive props would help? You could also utilise some components from a rc heli to have a nice efficient driveshaft and even variable pitch

  • @instantchow
    @instantchow4 ай бұрын

    8:20 sailors call this heaving to/hove to, useful in blue water to keep the boat as stationary as possible by balancing the sail forces with the keel drag. Neat that you found it with a prop and wind turbine!

  • @joefalcon870
    @joefalcon870Ай бұрын

    you have increadible skill and knowledge thanks for sharing and also for not adding some crap music to your great videos.

  • @janspoelstra8309
    @janspoelstra83094 ай бұрын

    This has been done decades ago 1:1. Search for a project called Aeolian (or something in that direction), an ocean going yacht with a wind turbine on the top of a mast, generating the power do either directly drive the prop mechanically, or store electricity in batteries, to power an electic motor, As long as there was wind, you could go in any direction you wanted, even directly into the wind.

  • @LaurArdam
    @LaurArdam4 ай бұрын

    In 1985, Commandant Cousteau created a boat called the Alcyone. This boat had the peculiarity of being powered by a tourbine housed in the mast. You can find all the information you need on the wikipedia page. It's an evolved version of what you're about to do. I don't know why the concept didn't catch on, as it was innovative for its time.

  • @carpediemarts705

    @carpediemarts705

    4 ай бұрын

    I read the wiki and couldn't understand most of it

  • @leotard2536
    @leotard25364 ай бұрын

    I'd love to see you make a foiling monohull/catamaran, like the AC75/F50 racing yacht, respectively. You could make the ride height (foil control) automated using lidar, like the AC40's.

  • @markdeschane4467
    @markdeschane44673 ай бұрын

    Everything you are talking about has been done before. As a Sailor, sailing to weather is a part of the enjoyment of sailing. It looks as though, you are having fun, so carry on!

  • @philtro99
    @philtro993 ай бұрын

    Wow that wrench at 4:10 really brought back some memories!

  • @Avetho
    @Avetho4 ай бұрын

    A great idea for making it work better is to use vertical axis turbines, there are already some cargo ships that have giant rotor sails on them

  • @yakacm

    @yakacm

    3 ай бұрын

    Yeah that's where I thought he was going.

  • @arturama8581

    @arturama8581

    3 ай бұрын

    Like the catamaran of "The Mariner' (Kevin Costner) in 'Waterworld'.

  • @aarongunner1711
    @aarongunner17114 ай бұрын

    This is an awesome idea. Also very related to the Veritasum video of sailing faster than the wind. But in reverse. Could you put a uni joint/cv on the wind turbine axle so you can change the direction of it vs the boat??

  • @Accatitippi
    @Accatitippi3 ай бұрын

    This is very interesting! On the first design, I would try to invert the blades of the turbine and keep them downwind of the mast: this would eliminate the need of a weather vane and probably increase stability as well. The downside would be that the blades would be in the wind shade of the mast for part of their rotation, but I think it's a decent trade-off!

  • @johncrock1489
    @johncrock14893 ай бұрын

    Excellent experiment. The older small racing catamarans used dagger boards just outside of each hull near midship. This gave a bite on the water without a full keel. The dagger boards were rounded on the leading edge so as not to foul on debris.

  • @lettuceguy8482
    @lettuceguy84824 ай бұрын

    Peter Worsley has done some really interesting stuff and not only with rotary sails. I have seen his videos multiple times and plan to try his idea of a self trimming wingsail on an old Sea Devil sail boat. I built a reverse flow double wing sail on my Sea Devil (I saw it on a video from tsstproa - who has also done some really interesting stuff) that got lots of attention from other people on the lake - that would sail in almost no wind, and go very close to the wind, but had some issues that I havent yet got worked out.

  • @TariqKhan-77

    @TariqKhan-77

    4 ай бұрын

    I have also seen his wingsail videos can only think I am missing something as cannot fathom why they have not been adopted in any capacity so far.

  • @Emu0181
    @Emu01814 ай бұрын

    I feel like a future boat project should be a RC rescue tugboat

  • @someotherdude
    @someotherdude12 күн бұрын

    I have always been fascinated by the wind turbine boat idea. I have some ideas and observations. First, an inherent issue may be the air friction(drag) of the wind turbine blades moving at high speed. That's the biggest difference from a stationary sail. So what if, instead, a many-blade low rpm 'high torque' design was tried? The blades would still need to be a very accurate airfoil, but they would be facing almost into the wind. Another issue is the tip vortices and the fact that air near the hub isn't doing much. So looking at the swept disk as 'sail area' you'd want a much bigger diameter rotor. I don't agree that a Darrius style turbine would be better, because this would drastically reduce the 'sail area'. The comments about your airfoils are right, you need a correct airfoil and yes you should be gearing the prop way up or going to a larger prop with a higher angle of attack on the blades. The most efficient water props actually look like airplane propellers, they are instead made stubby to protect them. Then of course there are these new 'loop design' props, which astonishes me that they (supposedly?) work better. Wind turbine boats work well enough to be acceptable in performance and they are Just so cool. Another interesting idea would be a turbine that compresses air instead of turning rotary shaft, and This air would be blasted out of an underwater eductor nozzle for thrust.one last idea: q combined wind turbine and solar electric boat ,Where The solar panel would block The noise and the hazard of the spinning blade and both would simply be connected to a conventional electric trolling motor. Awesome work, thanks for showing us!!!

  • @MidnightMaker
    @MidnightMaker3 ай бұрын

    I love this. I'm a professional sailor and Mechanical Engineer that lives just off of Green Lake in Seattle. You might want to experiment with your mast location as this is considered the Center of Effort (blades) vs Center of Lateral Resistance (hulls/keel). This affects how the boat can turn. Also, you might want to look into asymmetrical hulls. Hobie cats have used this to assist in tacking.

  • @ardwych4881

    @ardwych4881

    3 ай бұрын

    Mast, yes, but asymmetric [sic] hulls regarding tacking? They're more to do with reducing leeway, IME. Hydrodynamic lateral 'lift' - when one hull's more in the water than the other, as cats do. Tacking ease would be afforded by spring in the hulls - banana-bendiness - so that the bows and sterns would be more raised from the water, or less immersed, than the centres. ['..just off of Green lake'. Is this because those who speak American can't decide whether 'off' has two f's or one? ;-) )]

  • @dfgaJK
    @dfgaJK4 ай бұрын

    10:40 I wonder if the lack of left turn (vs right turn) authority is partially due to the rightward torque produced by the drag from the vertical drive shaft.

  • @integza
    @integza3 ай бұрын

    This reminds me of the Blackbird car that uses the wind to go faster than the wind

  • @Donuts_random_stuff

    @Donuts_random_stuff

    3 ай бұрын

    Did you completely watch the video, that’s exactly what he said at the end 😂

  • @jonmraptor3440

    @jonmraptor3440

    3 ай бұрын

    Integza is gonna make this but the turbine turns a jet engine and somehow make it work, or use it as a pump for a liquid rocket. Of course with 3d printer parts and a pulse jet has got to be involved.

  • @mastermalpass

    @mastermalpass

    3 ай бұрын

    @@jonmraptor3440of course Integza would try and make a jet out of this concept! 😂

  • @mastermalpass

    @mastermalpass

    3 ай бұрын

    Ah, I just realised who OP is, I assumed someone knew you were planning something like that, now I’m wondering if it’s just a joke but also err… I mean, you’re considering it now, aren’t you? 😂

  • @Suddsy11037

    @Suddsy11037

    2 ай бұрын

    Yup

  • @nickshortie
    @nickshortie3 ай бұрын

    got me laughing out loud after only three seconds in the video... lol! Well done!

  • @rockysmith43
    @rockysmith432 ай бұрын

    I live near Andrews Bay, saw this craft last year. Now I know what it was all about. Fun video.😊

  • @douglasthecorgi2568
    @douglasthecorgi25683 ай бұрын

    Had an interesting thought: What if, instead of a propeller, you used a parachute or kite that pulled a rope wound around a drive shaft? Kind of like an old-fashioned cuckoo clock uses weights, maybe it would be possible to use wind in the same way? You’d probably need to attach a balloon or something to keep the chute up, and gear the water prop to push more water for less rope unwound (or use a compound pulley system). If you found a way to close the chute, you might be able to set it up so it switches between two chutes - the high-drag open one reeling in the low-drag closed one, thereby making it almost perpetually running. On the other hand, this might be a better project to try out on a land vehicle with more efficient wheeled drive.

  • @eb8330
    @eb83304 ай бұрын

    Super weird thought: Is it possible to have a cutaway section of a tesla valve on the hull? That way it would in theory promote flow in a direction, and reduce the flow in opposite direction?

  • @christhesmith
    @christhesmith3 ай бұрын

    That spot at the end is very weedy! I was swimming out there in the summer! I hope I catch you out there one day!

  • @matsisaksson7192
    @matsisaksson71923 ай бұрын

    Haha that disappointment curve🤣🤣 you are so skilled 👍👍👍❤

  • @smellycat249
    @smellycat2494 ай бұрын

    Wow. I guess I’m the only one with their head in the gutter with that opening shot.

  • @cal8413

    @cal8413

    4 ай бұрын

    Nope, I’m also a degenerate

  • @ChoChan776

    @ChoChan776

    4 ай бұрын

    I guess you could say it's a poontoon boat I'll see myself out

  • @t1mmy13

    @t1mmy13

    4 ай бұрын

    Nah I'm convinced that was on purpose LOL

  • @fireandcopper

    @fireandcopper

    4 ай бұрын

    Sailussy

  • @CaveyMoth

    @CaveyMoth

    4 ай бұрын

    That is one sussy boat.

  • @misamokuzelpizu
    @misamokuzelpizu4 ай бұрын

    0:02 Risky perspective

  • @filip9192

    @filip9192

    4 ай бұрын

    I thought about it too xD

  • @TimsDrones
    @TimsDrones3 ай бұрын

    Thx. Enjoyed your work.

  • @CharlMarais247
    @CharlMarais2473 ай бұрын

    Haven't watched the video yet. I think I might know where this is going and I can't wait!

  • @Dr.Schlitz
    @Dr.Schlitz4 ай бұрын

    Same issue as covered by Veritasium video about land sail craft traveling faster than the wind.

  • @tuomassyrjaniemi
    @tuomassyrjaniemi3 ай бұрын

    Awesome! Love it! You maybe should increase efficiency by making some twist to wind propeller blades. Should have an optimal angle of attack from root to tip.

  • @thomascharlton8545
    @thomascharlton85453 ай бұрын

    This was great. I'd sure like to see you optimize all the elements and peruse this further. Blade twist for one thing. Also wind prop to water prop size ratio. Bigger water rudder? Thanks! Good stuff.

  • @Evanseys
    @EvanseysАй бұрын

    It's been done for years. I spotted one in NZ in the 80s, going into wind at a good pace. Yes, a catamaran too.

  • @marcfruchtman9473
    @marcfruchtman94734 ай бұрын

    I want to thank you for making this video.

  • @1212354a
    @1212354aАй бұрын

    You’re right about the efficiency of wheels vs. a propeller; our Chevy truck had a 5.0 liter V8 and 5 gears. The 20’ Boat had the same engine, but stays in 1st gear the whole time!

  • @pauls330
    @pauls3303 ай бұрын

    hi. i did this a few years ago on a 14ft long speed boat. i used a vertical wind prop and gearbox to increase the ratio to 1:10 and the water prop increased in rpm. the vertical wind prop didn't need to be swiveled. it caught the wind in any direction. i had to also designed a brake system to slow down the shaft to stop. if you need any info feel free to contact me.

  • @KurtElliott
    @KurtElliott3 ай бұрын

    I thought about that before and wondered how good it would work!

  • @undersky596
    @undersky5963 ай бұрын

    Even if this is inefficient its really cool! Keep going!

  • @cheekarp2180
    @cheekarp21803 ай бұрын

    Hello, I hope you read this, I remember about 20yrs ago it was proven that the paddling under water motion a ducks feet do is way more efficient that a propeller. But the rocking on boats made crews sick and a ridged structure break apart slowly so it was never used for shipping etc. But a slightly flexy boat with no crew would be fine

  • @wiegraf9009

    @wiegraf9009

    3 ай бұрын

    That's so interesting!

  • @thomasadkins7159
    @thomasadkins71593 ай бұрын

    Your project curve was really cute!

  • @adamconroy2146
    @adamconroy21462 ай бұрын

    Wow Mr Amazing. Taa for sharing.

  • @mikefochtman7164
    @mikefochtman71643 ай бұрын

    Pitch of wind blades vs water propellor => gears! And yeah, single-screw boats often have a steering issue depending on the prop/ hull/ rudder interaction. Some old Chris Craft single prop boats could NOT back up to port. An old book on small-boat handling talks about being able to use this 'crabbing' to actually move the stern sideways in some docking maneuvers.

  • @arturama8581
    @arturama85813 ай бұрын

    My trimaran 1.20 x 1.20m base and a mast of 1.85m has no keels either, but the hulls are tapered and it does have a centerboard on both outer hulls. It's enough to keep it on course and to be able to steer with relatively small rudders. Both outer hulls are positioned higher than the main/middle hull, so it effectively sails like a catamaran with only the downwind outer hull in the water, giving it much more resistance against being toppled over than a catamaran. In heavy winds it even lifts the main hull, giving it much less displacement. But that's tricky to balance. Also, a sail ship doesn't get blown forward, but sucked forward. Just like the wing of an airplane gets most of it's lift from the top of the wing, a sail gets most of it's power from the down wind side of the sail. Sails have more or less the same shape as a wing and the principle of generating 'lift' is the same. Ofcourse there's little to no advantage in a 3 hull design when 'sailing' straight into the wind.

  • @aimaction7393
    @aimaction73933 ай бұрын

    BRILLUANT. THE TECH ABILITY WAS.FANTASTIC. I BELIEVE THIS DESIGN IS A VIABLE FOR ANY CRAFT. IT WAS GREAT THAT HE INCREASED THE PROPELLER SI ZE YACHTS CAN SAIL INTO THE WIND.

  • @olafschermann1592
    @olafschermann15923 ай бұрын

    Awesome idea and execution

  • @kentowakai1234
    @kentowakai12343 ай бұрын

    I know on slower rotation speed like you get with human powered, a water prop that looks like an airplane prop is more efficient, with less drag. The boat props are in the 1000s of RPM. Larger vessels may be slower. Greg Willoughby is an engineer from Australia that specializes in fluid dynamics that helped me with mine. I now use a 14" with a 12 inch pitch for my boat. Hope this helps.

  • @VojkoPlevel
    @VojkoPlevel3 ай бұрын

    For a sailboat, the center of rotation of the boat is the keel. Adding the keel would help the directional stability. If it could be controlled and moveable from the bow to the stern (and back), you could turn into the wind easily with the keel towards the bow, and away from the wind with the keel towards the stern. Of course, it is additional drag, though.

  • @MrAkifusion
    @MrAkifusion3 ай бұрын

    Excellent, congrats!

  • @Greenicegod
    @Greenicegod27 күн бұрын

    Something you missed about sailboat dynamics: The sail is not the only force acting on the boat, unless you're going directly against or with the wind. The maximum speed a boat can get in a Run is the speed of the wind, and realistically the water drag reduces that speed. If the boat is going across the wind in some way, the normal force from the wind on the sail is counteracted by a normal froce from the keel pushing on the water. Adding up these two normal forces, you can see that the resultant force is forward unless the sail is directly in line with the keel. Basically, the boat gets squeezed between these two forces and shoots through the water like a bar of soap shooting out of your hand. The fastest speed a sailboat can go is somewhere between Beam-reach and Broad-reach, and not by a small margin (a super high efficiency sail-ice-skate can go 3 times the wind speed on the beam). That's why a sailboat can go upwind at all; if the wind simply pushed the sail normal to the sail's angle (like putting a sail on a barge), you would only be able to sail downwind at some angle. In some sense, the keel becomes a section of a propeller.

Келесі