TIG Welding Stainless Steel | Root & Hot Pass!
Ғылым және технология
Tig Welding Stainless steel procedure on open root pipe welding. TIG welding on stainless is known for its precision which is why it’s the go-to process for projects that demand clean, controlled welds, especially on less-forgiving materials like stainless steel alloys.
Stainless steel continues to grow in popularity because it’s a strong material that is resistant to many types of liquid, gaseous, and chemical corrosion. Stainless is an expensive metal - three to five times more costly than mild steel.
#tig #tigwelding #extremetig
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
All of my videos are recorded at working sites in various locations and different welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe and click the bell.
It doesn’t cost you anything but massively helps my KZread channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig
Пікірлер: 89
Great channel, good real life welding 👍 top skills. I would like to be able to try a root pass width 3.2mm wire. We don’t get 3.2mm GTAW here, do you think it helps for the bottom 6 o’clock portion of the root for better penetration?
@X3MTIG
2 жыл бұрын
Hey bud thanks for your comment. Not really, it all depends, from what you most comfortable with and the most important thing is “Gap” . I wasn’t involved in preping or tacking this joint, I prefer using 3/32 wire for the root pass. You just have to dial in and find good inclination for your filler wire.
Glad to have you back man! 👍🏽 Your videos have been really motivational to me to learn the tig welding, which is really hard and demanding. Thank you for all the tips and explanations! 💪🏽😊
@X3MTIG
2 жыл бұрын
Thank you brother for your comment and support, I really appreciate it. People like you are my motivation to keep welding and making more videos. Good bless 🙏
Haven’t tig welded 3-4 years. Welding stainless pipe tomorrow. Thanks for the video to refresh my mind and build confidence. 🙏🤌
Hey man just found your channel, really informative and awesome. I am a complete newbie, strating my welding school next week and its really great to see experienced guys showing what its actually like in the field so a big thanks for that!
@X3MTIG
Жыл бұрын
Thanks David, I appreciate your support and wish you good luck with your welding school 💪
Thank you for tips brother! Keep it up man! ✊
@X3MTIG
2 жыл бұрын
Thanks buddy, I’m trying 💪
Man I’m barely about to start stainless pipe but you got skill man! Thanks for the info and help!🙌🤘
@X3MTIG
Жыл бұрын
Thank you my friend, keep grinding brother 👊
Watching your videos has really opened my eyes I've always lowered my juice for the bottom part on positional butt welds, I've always been told up to now if your juice is to high on the bottom you will get undercut/ concavity if am doing a 3"stainless butt in 5g am on 80 from the bottom up past the sides then 90-100 for the top half, main reason for this tho 9 times out of 10 with stainless your gap tends to close in
@ryanmcguinness7898
5 ай бұрын
Great welding btw
From a tack or to a tack never though a tack love it
Отлично друг, на высшем уровне! Успехов тебе и здоровья! Удачи! 🤝
Great content and great delivery of information.. I always learn something about our craft that I did not know before when I watch your videos. Thank you for posting your work.
@X3MTIG
9 ай бұрын
Awesome, thank you!
Good video for learning how to welding pipe with tig welding
Good lesson
I see u using that ol sook weld craft weld head. Nice rig, u hardly see them any more.
Fenomenalno kao uvijek! 👍🏻😊
@X3MTIG
2 жыл бұрын
Hvala ti brate 🍻
I really like your video we can feel the focus on that ! I also like your 3M welding mask p100 Pancakes. i make my research and i cant find exactly the same that you have. Can you leave here a link that i can use to buy mine. Thank you !🙂
Dig it brother. You're so calm. That's the way.
@X3MTIG
Жыл бұрын
Thanks buddy, glad you enjoyed it 👍👊
I have found the same thing as you about welding 6oclock to the top for stainless to start with. from time to time I have to start at the bottom but in those rare situations I put quite a few holes in the tape at 12oclock and the purge tube at the bottom. i never thought about using the metallic duct tape for the purge. they just handed me painters tape and said go. either way it's going to stick to the back of my glove and roll up as I weld.
@X3MTIG
Жыл бұрын
Thanks for your comment, I was using aluminum tape, I find it better than painters tape as doesn’t leave much glue on the pipe when got hot , but as you said, either way it will stick to the gloves at some point 👍
you are amazing !!!
Love it brother
Great channel!😍😍😍😍😍
Hi sir from India in Tamil Nadu super Your job☺☺☺
Hello sir, you have really mastered your skill, and i have learned a whole lot, i will be going for a text on 6g position soon, pls sir can you make a video for 6g position? I will be really greatful 🎉
Very nice
Sim mestre observei que com essa bexiga inflável torna bem melhor o trabalho na isolação do oxigênio bem prático gostei é uma bela apresentação de raíz e reforço obrigado pela orientação 🙏
@X3MTIG
Жыл бұрын
Thank you brother, I’m glad you like it 👍
Great channel!
@X3MTIG
Жыл бұрын
Thank you very much 👍
Good job..love you brother❤️
@X3MTIG
Жыл бұрын
Thanks ✌️
Great video! Can you link the helmet please? I can't find ot online.
Is there SS root process can be weld by direct,i mean like making carbon steel root just maintain to supply without waiting for the key hole ..cause i see other video they use that kind of skill and very well nice root 👍
Hey man can you help me out on the welding mask, where can I find it? Because I searched the whole internet but I can't find that particular one of yours.... I found only masks with the big screw on filters... The mask you have got the small p100's.... Would be a good/better option than a monkey face. Thanks in advance, your videos really help me understanding big bore and heavy wall pipe welding. Thanks a lot man😎💪
@Frankster661
Жыл бұрын
Damn bro he’s being a dick doesn’t want to give it up
Cann you say me name welding mask Thanks and good job
@X3MTIG
10 ай бұрын
3M welding attachment
Do a video on chrome!!
How hot you running, amperages
Why check the gap after? What happens if the gap closes?
Where did you buy the balloon? I need that for big pipe , definitely useful!
@X3MTIG
Жыл бұрын
provided by client, just check for purge balloons online
Nice video🎉 witch tig torch are you using? 😮
@X3MTIG
10 ай бұрын
Miller 200
Sir, can i ask a question??? When you feed the filler only one side bevel?? Thank you and godbless
@X3MTIG
Жыл бұрын
No, not on the vertical weld, I feed the middle or both edges!
How’d you break out welding? I got my structural welding down but I’m having a hard time trying to break into pipe, was thinking about going to school to learn tig since my company doesn’t work with tig pipe, only big bore stick
@X3MTIG
Жыл бұрын
Hey Nathaniel, thanks for your question. Structural welding in all positions is base line for switching out to pipe stick welding. Once you get really good at structural welding, shouldn’t be any problem to apply your skills to pipe. Overhead and vertical is where you need to focus more on controlling your puddle, that is most tricky part for pipe in 6G. TIG is little bit different story as it’s less beginners friendly, but if you willing to learn it will take some time, and the best way to learn is to start in 6G rite away. More you burn more you’ll learn 💪
@nathanielclause2588
Жыл бұрын
@@X3MTIGso I ended up going to school not long after my comment, finished a 9 month field combo course (tig pipe, stick pipe, stick plate) in two months. Those years of burning stick rods paid off and got in and busted ass to finish but I always come back to reference your videos. Appreciate all you do, that freehand on the bottom was gnarly. Greetings from Louisiana 🤘🏻
@X3MTIG
Жыл бұрын
@@nathanielclause2588 happy to hear that brother 💪
When u will do the stick I would loved to see u when cap it with 304 please u 👋 good teach/coach
@X3MTIG
Жыл бұрын
Thanks 😊!
Bro I gotta ask what kind of hood is that you have attached to that respirator??
@X3MTIG
Жыл бұрын
3M full face respirator with welding kit attachment.
Hey man I went to school for like pipe welding and got really good at welding carbon and stainless TIG pipe and I’m having such a very hard time finding a job that welds Stainless or just regular carbon pipe. I’m in Houston to so I know there are some it’s just I can’t seem to find the right places any tips?
@X3MTIG
Жыл бұрын
Hey bud, only advice I can give you is to be patient, and wait for your opportunity, but also be ready for it. Keep applying for jobs you would like to do, and once you get opportunity, you have to prove yourself, so they’ll remember your name. It takes years to build your reputation, and name, once you reach that point, your phone will be ringing daily with job offers. But remember; you have to be top, or close to the top 🔝.
@christopherhughes8265
Жыл бұрын
@@X3MTIG thank you so much man I’ll keep on going and try my best
Whats that lens goggle looking thing you use with your respirator?
@X3MTIG
Жыл бұрын
Just full face respirator with welding attachment.
Entao ganhei 1 test no AT e sei fazer tig Ma to destrenado na area vo pega d novo molecse a munheca😎
Hello man Where can i order that 3m welding mask ?
Name of mask or link?💪🏼
Nice welding but I think you need to invest in a better purge set up you see that theres coking in the weld from lack of purge gas in alot of industries that won't be exceptable I'm guessing your doing sanitary pipe ? I'm guessing steam or water. As if it's for product I know in my country they won't except it great technique
@X3MTIG
Жыл бұрын
Thanks for your comment bud. I’ll let them know 👍
@ivang8025
Жыл бұрын
😂He is working for different companies as he is a field welder, therefore he can’t choose the equipment or the tools at various sites. 🙄 So, imagine, how good one needs to be to actually work with those outdated tools and equipment!!
Why you get slim filler rode .there is lot of gaping in to the pipe ..only for knowledge
where do you live my man? country, not exact location haha
@X3MTIG
3 ай бұрын
Canada 🇨🇦
What's the name of that welding mask please?
@X3MTIG
9 ай бұрын
3M
@lc2583
9 ай бұрын
@X3MTIG Thanks, but only the speedglas masks come up when I search for 3M. Any chance of the part number/model please?
Плохо то что перевода нет на русский язык.
@X3MTIG
10 ай бұрын
I’ll add it for you 👊
Union ?
@ivang8025
Жыл бұрын
Man, I think he is working for Union, but union has nothing to do with his knowledge as he is European and has gained his knowledge there, union has nothing to do with it!
Argon is heavier than air, that’s why it’s easier for you… I always recommend a mixed shielding gas, argon/helium/co2 as an example ✌️ Oh and your purge time drops extremely, I’d say about 2 minutes for this job
@X3MTIG
3 ай бұрын
Cool, thanks
What the mask? B-100 pancake?
man what is your mask
Root amps Hot pass amps tell me please