I solved the bog, stall no start issue. Turned out to be the coil. I replaced it with a new OEM coil. The saw fired right up and now runs better than it did initially. I’m sure that it revs higher than it did initially and doesn’t bog out.
@toolingaround1979
Ай бұрын
Awesome information to put in our back pocket. Thanks for the update.
@donnywalker46916 ай бұрын
Good video
@toolingaround1979
5 ай бұрын
Thank you
@wayneanderson9915 ай бұрын
Loctite is your friend. Get your self a couple of OEM clips for the filter cover and you'll be off to the races.
@samrothstein97165 ай бұрын
No worse than issues with a $1500 husky in the same amount of time.
@toolingaround1979
5 ай бұрын
I wouldn’t expect these issues in one year from a husky. At least not their commercial size saws which this holzforma is in that category. But for the price I still think they are a good value. Just be ready to work on them some.
@anytractorman2 ай бұрын
Hope you have no trouble with the main 6202 bearings. The ones in my same saw were loose in the case. They glued them in at the factory. Cases are junk now.
@toolingaround1979
2 ай бұрын
First I’ve heard of that
@larrywarner93145 ай бұрын
Dude oem top cover snaps do the same thing, ive replaced the snaps three times on my owm 372 , as far as the bolts coming loose loctite them
@toolingaround1979
5 ай бұрын
The cover itself was too flat. Used a dremel to put a small groove in it and solved that issue. A couple of hours running with locktite now and it hasn’t come apart again. Thanks for the comment. 👍
@kippstreelandscaping4 ай бұрын
These saws are good but only before running it lock tight every bolt you see and put OEM recoils and ignition coils and treat like a baby
@rocketruss34053 ай бұрын
Holtzfforma I have had the same G372XP saw for a year now. I have cut maybe 5 cords of wood. I was really enjoying it compared to my old Husky 268XP. Currently it starts up easily when cold but bogs out and dies after 5 minutes of running and won’t start again until the next day. I’m trying to figure it out. I have replaced the plug and am going to get a carb kit and try that, thought the local Husqvarna dealer is having difficulty finding a kit for the WALBRO HD 12B that the manual says it is equipped with. I’m starting to wonder if it’s the ignition coil. What do you guys think? The other issue I have had is that the chain brake handle broke off at the screw on the left side at -10c. I replaced it with an OEM part and it has taken a fair bit of abuse and is still in one piece. Yes, loctite the screw.
@kraftzion
Ай бұрын
Try unscrewing the gas cap and screwing it back on. The tank vent might not be working properly.
@rocketruss3405
Ай бұрын
I solved the issue. Turned out to be the coil. I replaced it with a new OEM coil. The saw fired right up and now runs better than it did initially. I’m sure that it revs higher than it did initially and doesn’t bog out.
@bogdankalas13184 ай бұрын
What mind pro? Or magnum? Its only sticker😅 in europe we have no pro, no magnum 372xp is a 372 XP.
Пікірлер: 16
I solved the bog, stall no start issue. Turned out to be the coil. I replaced it with a new OEM coil. The saw fired right up and now runs better than it did initially. I’m sure that it revs higher than it did initially and doesn’t bog out.
@toolingaround1979
Ай бұрын
Awesome information to put in our back pocket. Thanks for the update.
Good video
@toolingaround1979
5 ай бұрын
Thank you
Loctite is your friend. Get your self a couple of OEM clips for the filter cover and you'll be off to the races.
No worse than issues with a $1500 husky in the same amount of time.
@toolingaround1979
5 ай бұрын
I wouldn’t expect these issues in one year from a husky. At least not their commercial size saws which this holzforma is in that category. But for the price I still think they are a good value. Just be ready to work on them some.
Hope you have no trouble with the main 6202 bearings. The ones in my same saw were loose in the case. They glued them in at the factory. Cases are junk now.
@toolingaround1979
2 ай бұрын
First I’ve heard of that
Dude oem top cover snaps do the same thing, ive replaced the snaps three times on my owm 372 , as far as the bolts coming loose loctite them
@toolingaround1979
5 ай бұрын
The cover itself was too flat. Used a dremel to put a small groove in it and solved that issue. A couple of hours running with locktite now and it hasn’t come apart again. Thanks for the comment. 👍
These saws are good but only before running it lock tight every bolt you see and put OEM recoils and ignition coils and treat like a baby
Holtzfforma I have had the same G372XP saw for a year now. I have cut maybe 5 cords of wood. I was really enjoying it compared to my old Husky 268XP. Currently it starts up easily when cold but bogs out and dies after 5 minutes of running and won’t start again until the next day. I’m trying to figure it out. I have replaced the plug and am going to get a carb kit and try that, thought the local Husqvarna dealer is having difficulty finding a kit for the WALBRO HD 12B that the manual says it is equipped with. I’m starting to wonder if it’s the ignition coil. What do you guys think? The other issue I have had is that the chain brake handle broke off at the screw on the left side at -10c. I replaced it with an OEM part and it has taken a fair bit of abuse and is still in one piece. Yes, loctite the screw.
@kraftzion
Ай бұрын
Try unscrewing the gas cap and screwing it back on. The tank vent might not be working properly.
@rocketruss3405
Ай бұрын
I solved the issue. Turned out to be the coil. I replaced it with a new OEM coil. The saw fired right up and now runs better than it did initially. I’m sure that it revs higher than it did initially and doesn’t bog out.
What mind pro? Or magnum? Its only sticker😅 in europe we have no pro, no magnum 372xp is a 372 XP.