Make sure you check the description for a link to some more videos about this car and engine ;) Grab your HPA merch here! Yuki, Ben's dog, signs each black one with a black marker. Hard to see, but you knowing it's there is what counts: shop.hpacademy.com/

@lkinchen101

4 жыл бұрын

Do u think ur can give me the hook up on my scion tc 2006 .. I would like a special racing in to fit my car would push 850 whp with 60 to 70lbs boost with ur all new technology to see how it runs for a 4 cylinder

Love the way this dude almost massages the info out of these engine builders and more often than not the interviewer sounds like he knows more than the engine builder bout his own engine. Obviously not but another great interview😎

@Tex777_

5 жыл бұрын

Part of a great interview is asking the right questions!

Thanks to HPA for another great tech chat! Not many would have known about the big dramas leading up to #WTAC2018 without this. Doing new things on is not always rainbows and sunshine. But knowing your work, and making the best of the situation at hand, can sometimes allow you to take home the win!

@hpa101

5 жыл бұрын

Thanks for giving us some of your precious time! Always learn something new from you and we're excited to see what you've been up to next time we have a chance to catch up =)

@ThunderAppeal

4 жыл бұрын

Thank you for being generous with the tech information and not giving canned answers.

@ThunderAppeal

4 жыл бұрын

@@hpa101 The interviewer sounds like he genuinely is an engine tech head. Not a lot of interviewers/channels, if any, actually delve in to coolant pressures, causes for liners to slip, engine dimensions and expansion, etc. Probably the first interview in a long time that actually made me want to listen carefully.

@hpa101

4 жыл бұрын

@@ThunderAppeal appreciate the high praise! While they make for good titles, we do enjoy going a little deeper than just power figures and bore sizes with knowledgeable people like Oskar here. Glad you do too - Taz.

Learning so much from this channel, well done.

@hpa101

5 жыл бұрын

Thanks mate, glad you're learning and enjoying the content :) - Taz.

Oskar seems like a really awesome dude. I love the interviews you've done with him! I also appreciate how much knowledge is condensed into these interviews. Excellent questions being asked with really clear answers.

Awesome as usual. Love your interviews and what a great interviewee as well. Masses of learning from my side so thanks guys.

Every interview I've seen Andre do is done with intelligent curiosity and respect to the interviewee. As a tech interviewer he is without peers. I always walk away from watching HPA posts having learnt a lot about the topic they've covered, and realising I knew far less than I thought I did at the beginning, and especially so when he has the likes of Oskar Elmgren under the spotlight. As always, thanks HPA and keep doing what you're doing. P.S. That block is as much a piece of art as it is an engineering feat.

Another awesome interview!

Such a cool channel touching on the technical aspects of high performance engine design and operation. It’s great to hear a Kiwi accent for a change as well. Keep ‘em coming!

@hpa101

4 жыл бұрын

Cheers for the support mate! Really appreciate it - Taz.

Love the Porsche typ912 engine drawing on the wall! Wonderful inspiration to gaze at the first 1500hp Porsche race engine.

Very cool. Lots of solid info!

You're an amazing interviewer. Rare skill!

Well done Oscar! Keep at it!

Billet blocks and parts are so beautiful. Why does every beautiful piece of machinery have to be so expensive? Amazing Video as always. Love you guys.

@FrequencyOfThought

5 жыл бұрын

A billet block is my dream but they don't make blocks like this for my platform so what can you do ? Work your ass off to afford a 5 axis cnc mill and then maybe orders will come in once you're the first one with this block offered in Billet

@alexshaw9145

5 жыл бұрын

@@FrequencyOfThought what platform are you running boss?

@FrequencyOfThought

5 жыл бұрын

@@alexshaw9145 Ecotec turbo Direct injection

Another great video from HPA

Taz went in hard for the first few minutes of the video had that man pushed into the corner think you caught him by surprise 😂😂

More info is always good

Awesome content. 👌

You really caught him off guard. Try a pre interview, interview. You have an awesome attitude. BUT if you intterview me, I would be intimidated by your go for it attitude combined with your wisdom, through experience! Keep at it. Thank you for your time and sharing your experience and knowledge.

@hpa101

Жыл бұрын

Cheers mate! We do have a chat before we flick the camera on but an interview is never going to be as smooth as a prepared script that someone has looked over multiple times before putting it on camera. Even then, we have plenty of outtake reels of Andre and the team here from course material filming, which sometimes is a word for word script 😅 Oskar knows what he is talking about and is a very good communicator especially if you consider English is not his first language I reckon though. He also was a great podcast guest: kzread.info/dash/bejne/oIaWpsqlXZCadKw.html www.hpatuned-in.com Cheers for the support too! Andre hopes to keep doing content like this for many years to come and no doubt we'll chat to Oskar a few more times too if we're lucky 😎 - Taz.

If im hearing correctly, the head was intended for a "flat gasket" but a gasket with cylinder "rings" was installed. The gasket compressed until the embeded rings contacted the tops of the cylinder sleeves, at which point the act of tourquing the headgasket forced the sleeves to drop?. ... Great vid as usual gents! (saving for your whoooooole package as we speak. 😍 #alloftheeducation )

@mayk3lll

5 жыл бұрын

Correct! My guess is the head has a groove machined to accept that step of the sleeve

thanks HPA 😎👌👌👌

Please go to Oskar shop give him a few beers and do a long format engine build/design debrief.

Wow!! 1000cc per cylinder thats an imressive number for a 4 banger!!!

Would be nice to get more information how they modify the drivetrain.

That block is sooooo solid looks like it can be part of the chassis.

great interview!!!

@hpa101

3 жыл бұрын

There's one more kicking around as well, some of my personal favourites =) - Taz.

Oscar - He's the TRUTH!!!

Gun drilled rods is my favorite type of piston oiling i wonder why it was ruled out or not considered ..

So the cylinder liners were machined to sit higher than the engine block on purpose, but because the mls gasket had grooves around it that caused the liners to sit? And the solution was to machine the engine block including the liners flat or I got something wrong? Thanks! As usual amazing content!!

this host is top level

Will it fit in my camry

No worries he is not a super good expert, just a expert :)

I'm guessing that billet blocks can't be made closed deck with sleeves?

Is the block made out of 7068 aluminium alloy (Tennalum) like the rods? Also, would that allow be suitable for intake valves?

@hpa101

4 жыл бұрын

I can't answer regarding the intake valves, but the block alloy is specifically discussed in the video - Taz.

Can they do this for my scion tc 2006 make a custom engine all I'm look to run is 850 hp

That's some extreme block webbing

Why no block guard?

Brilliant interview as always but how can Elmer racing justify €120,000 for this engine, I'm currently building a 4L barra motor that cost me £400 including shipping from Australia I've spent £1200 on pistons, conrods and gaskets another £2200 efr-9180 borg warner turbo and I should hit 1500bhp.

Please please get Adam Brunson from tune plus inc on here!!!

Instead of a step…Why not have the sleeve seated at the bottom ?

Now let Shane T put a compound turbo setup on it.

Sounds that this high horsepower engine is "one time use" and in dire need to rebuild after every competition run

The fuel is not compatible with the nikasil coated bore

@NieJestemzPolskiPL

5 жыл бұрын

Depends. In europe this is fine.

@Drake5153

5 жыл бұрын

@@NieJestemzPolskiPL sounds like fuel quality then, lots of rumors of low quality e85 in north america depending on where you buy

@exvils

5 жыл бұрын

@@Drake5153 lots of fuels are compatible with nikasil coating(gas,leaded gas,c16,ethanol,methanol), just sulfur levels have to be low (it was problem for low-end gas (end bmw M52) in NA at the time

@lightmetalinc.6488

5 жыл бұрын

This is probably in reference to the nature of Ethanol and the additional quantity required - In many cases it can leach down into your cylinder walls and if its bad enough, dry them out causing friction, heat and glazed bores. If you don't have oil squirters your more likely to encounter these problems regardless of the coating.

@BeamRider100

5 жыл бұрын

I didn't know that. Another reason to use iron bore liners.

What engine is this based off of 4G53?

@MrCornholios

5 жыл бұрын

Porsche M44

@SuperBobKing

5 жыл бұрын

It sounds like an original design to me.

@N4CR5

5 жыл бұрын

5sfe camry for sure

@SuperBobKing

5 жыл бұрын

@@N4CR5 I have spent a lot of time looking at 5s/3s blocks, and this doesn't seem anything like one other than the sleeves.

@turdferguson9190

4 жыл бұрын

@@SuperBobKing Nah, Porsche standard crank, cylinder head, water pump, bellhousing etc bolts right on this block.

In diesel they have been wet sleeving with liners since the 50 s Linner protrusion is in crucial in building Wet liner Diesel engines.

Would it fit a 99 Hyundai Tiburon lol

3000?!

@ValentineC137

5 жыл бұрын

3000!

Pics or it didn't happen

10:20 "I don't feel confortable testing stuff on customer's engines"... Are you kidding me ??? the freaking headgasket was never tested..

@hpa101

5 жыл бұрын

The head gasket was out of spec, as in not listed as suitable, and not supplied ;) What a great result from a tough start though eh! The team did really well to pull it all together - Taz.

@monkeypainter808

4 жыл бұрын

High Performance Academy the wrong gasket was used that cause the sleeves to drop which caused a leak. Why did replacing the gasket with the same spec solve the issue? Or rather why did the first gasket fail if the second one didn’t? Is it because the first gasket was over compressed?

Why did you not do the interview while looking at the actual part in question the ENGINE not to be rude but from an engineering standpoint would rather look at the engine than your faces.

@hpa101

5 жыл бұрын

There is only so much footage you can get and use of a bare engine block :) We are also nearly always under a pretty heavy time crunch. However I do appreciate the feedback, fire me through a link of another channel that is doing it well. We will take a look. - Ben

@exvils

5 жыл бұрын

go to elmer facebook page/webpage/yt channel for more info