Check out the current tractors we have for sale here: www.goodworkstractors.com/product-category/tractors-mowers/

@andrewflores1776

6 ай бұрын

Do U Al’ sale wheel spacers?

@rickcobiski743

6 ай бұрын

Does the cab allow for a backhoe attachment ? will the seat pivot with the cab ? In the northeast . 15:49

I purchased a kioti ck2620. I did my research and I found, the capacity and value were unmatched. I’ve got 50 hours on the machine now and I couldn’t be happier

I have this very Kioti and it is AWESOME! A/C works great by the way. Loads of power and capacity. Zero complaints with it.

I have this tractor with a belly mower and rear snowblower for the winter and absolutely love it. The loader is a beast as well. Mowing in the summer with cab and air conditioning is great and the cab keeps the bugs and dust away. Its a great tractor.

@GoodWorksTractors

7 ай бұрын

That's awesome, glad you're enjoying it!

@1millionstartups

7 ай бұрын

Every homesteader's and hobby farmer's dream machine.

I bought my Kioti almost 3 years ago and my buddy bought the equivalent size john deere just about the same time. I haven't had a single issue or problem with my kioti and my buddy has had his deere back in the shop twice now for three different issue. Plus he had some storm damage that needed cleaned up and my kioti would out lift his deere every time. I always joke with him about how I bet he is glad there are a lot of deere service centers since he needs them all the time..lol..

I think Mister Green has been resting on his laurels for far too long.

@GoodWorksTractors

7 ай бұрын

Agreed!

@andrewkirch5920

7 ай бұрын

When you are on the same side as the Church of Scientology, you’ve trucked up to say the least. I won’t buy a green tractor because of their lies and disgraceful behavior towards farmers who are just trying to repair their tractors. I was looking at Kubota but the hydraulic pump and capability of the Kioti has caused me to visit the Kioti dealer.

@freepatriot6313

7 ай бұрын

Agreed. It used to be that Deere was the best for the most part…. So they earned their extra cost. No more … now it’s cheaper aluminum two speed transmissions.. plastic body/hood , smaller lift cylinders, etc. I would suspect that Deere purchases ptheir parts cheaper than most manufactures … simply because of volume , If nothing else. So … Deere just has greater mark-up. I won’t buy another Deere. …

My CX came with the upgraded 3pt hitch arms. Extending end link and pin sway bars. I added the hydraulic top link. Absolutely love mine. 6ft 3pt finish mower, 6ft back blade with the loader for snow removal. And the a/c works fantastic, will never go without the cab ever again!

I have a CX2510 HST, no cab, and have over 200 hours on it in about a year and a half. What it can do for its size and maneuverability continues to make me happy I bought it. With loaded tires (Rim Guard) and rear ballast, it *can* lift somewhere about 1000 lbs palletized and evenly distributed on forks, but must keep it low, slow, and on the level (requires extreme caution). Loader technique is impotant to master for bulky and heavy things like rock or wet dirt. It handles a grapple very well, larger logs handle better with at least a box on the back for ballast. Yes, it has capacity limitations and at 25 HP, it must be in a low gear and slow going up a hill towing or under heavy load, but it can do it. When I feel like it comes up short (and it does), I remind myself I would need a much bigger machine and have to live all the time with more than I need most of the time. Sometimes I experience those limits as lack traction, slower speed under load, or with the loader when I wish I could lift a full ton on a pallet. But, those are true limitations, just known constraints, because it wasn't designed to be more than it is. That said, it does exceed slightly its paper specs. It's a real workhorse, tiny but stout and very capable, period.

Man, you're not kidding about the bucket strength! I had 50 ton of 6-inch (a lot were as big as 12 inch) rip rap dumped in a pile last week. I used it to fill washouts on the edge of a 32 acre field. I rammed that loader bucket hundreda of times into the bottom of that rock pole with my Kioti CK4010SE while moving all that riprap. Not ONE dent or bend ANYWHERE on that 66 inch bucket!

We need to break the deere /Kubota dominance. These vids and dealers like you will help!

5 years ago i researched tractors for a snow plow company. I looked at deer, Kubota, tym and Mahindra. Looked at the 40hp series. Deer had nothing available for at least a year. Kubota dealer didn't even let me sit in one, (and got a mechanic to answe questions -who was annoyed at being interrupted). TYM dealer took lots of time to answer questions and handed me the keys to one to take for a spin. Mahindra dealer did as well. TYM and Mahindra were equally priced, significantly less than Deer or Kubota. Just this year upgrading to the 60 hp. Similarly specs on deer and Mahindra. 30k difference. And the dealer support from Mahindra has been phenomenal!

Love my Kioti tractor. When looking for a tractor, the big turn off for me with John Deere was their proprietary attachments, and no air conditioning.

@mrblanche

7 ай бұрын

When we were looking for a tractor, I drove a Kioti in the class we were looking. It would probably have been acceptable. The aluminum rear end was the big killer for me on the John Deere.

@KM-vc2yp

7 ай бұрын

@@mrblancheTotally agree the aluminum rear end was definitely deal breaker. I ended up with a Bobcat CT2025 and I’m happy with it. I don’t have the cab model but that’s no big deal to me.

@corylee2261

7 ай бұрын

​@@KM-vc2ypkioti builds the bobcat

I own a CX2510 cab and did a lot of research before buying over a 2025r. There are couple things to correct on your review. The engine is the exact same 3A165 100ci 3 cylinder as the CK2610/CK2620 model. No idea why the manual says 87ci. It has the 100ci engine. The FEL hoses are on backward on yours. Flip them around where the 90s are up top to solve the low ground clearance issue. The ROPs model has better hose routing and can replace these hoses too.

Would have loved more options when I was shopping in GA! The two local Deere dealerships wouldn’t event bat an eye when I walked in ready to buy. Kubota dealers worked for the deal and I walked away team Orange.

I strongly considered the CX2510 and it is a fine machine. I ultimately bought the JD 2025R due to having a dealer close by and the resale value. Totally pleased with it. Given proper operation and maintenance either machine will get the job done and be worthy to own.

@fralin1966

4 ай бұрын

I agree the Kioti is a good machine but fit and finish the lines hanging down for example is not on par with the John Deere he has a habit on Bashing the 2025r which is a much better machine than the 1025r he so often brag's about

@GoodWorksTractors

4 ай бұрын

Lol, I wouldn't trust anything you have to say with comments like this.

I'm glad you finally checked out Kioti. I can follow your channel now!

Looked at the JD2025R, Kubota LX2610 and the Kioti CX2510. Went with the CX2510 and not disappointed at all except I wish I got the cab. Got 300 hours on it without one single issue. It was 6K less than the JD and Kubota.

@GoodWorksTractors

7 ай бұрын

Sweet, that's really good news!

@3crowsfarm16

7 ай бұрын

Same story here, I just bought a cx2510 after comparing the same models and saved $6k vs kubota and $9k vs JD Open cab doesn't have the rear remote hydraulics I've just got 10hrs on mine so far, works very well!

Overall, the Kioti looks like a great tractor but the hydraulic lines hanging down makes one wonder what they were thinking, that should have never left the factory like that.

@dkat1108

5 ай бұрын

Ya no thanks so in 20 years we going to be able to get parts for this tractor ?

@dkaifetz

3 ай бұрын

I pointed this out to my dealer (not a comedian like the guy in this video who doesn't know a clutch pedal from a brake pedal) right away before buying my Cx2510, he explained sometimes the factory tends to reverse the 90 degree elbow end of the quick connects to the loader with the straight ends, and fixed it during my pre-sale pm. Then they are tucked up high nice and tight. Check out Google images for the right side of the Cx with loader and some are correct and some are wrong. This joker had not clue about that but still wants you to buy a $30,000 tractor from his dealership. yeah, right.

I bought its big brother in June. CK4010SE cab. Came over from WI in Aug and got an HLA snow pusher a quick hitch and some weights. Great service from your people! Load and go! Tractor has been great in the 25 hours I have on it now. I got it for the 1900lb loader capacity. Rim guard in the rears and an addition 8 suitcase weights will work great for snow this winter.

I have a ck 2610 and a 2025 JD. The kioti is heavier and more stable on hills. Kioti did a god job providing nice features like auto throttle. Two sets of remotes is a great idea. Cab and air nice when mowing.

I’m impressed. I have a 2925R. This all sounds better. It looks goofy with the cab and that cab is brutally hot in the spring through fall on warm to hot days. That increased lift height and capability is a nice feature as well. We run it as the yard tractor and it does mini round bales to 27”. There’s enough power & speed to meet our needs there. We also have a 3039R as well so it is used when the other can’t do the job. We like them, we have run very large green machines before selling the ranch/farm before retiring and selling out. It’s what we had & know. The dealership treats us pretty good still, but I have looked at a couple of low hour used Kiyotis lately and one is really nice, with about 800 hours and not a scratch. It’s a DK5010,,,,, even more Hp than the 3 series we have but about the same $$$ brand new. This one is a couple of years old and pulled a mower conditioner, hay rake, small baler, loader, flail mower,,,,, it did it all. We will get the accessories as well. As a package it adds up, but hard to beat lightly used prices!! As you know! 😊😊

Bought my CX2510 HST last April. SE version doesn't fit my garage so mine is less well equipped then this one. Not to worry. I am a retired infantry officer and wether on foot, in my APC, Stryker or hanging down a parachute, you come to think that feeling the sun, rain or snow on your face is a necessity. Bought the bucket, the grapple and a gradebox for it, and extra back weight. Very impressed so far. Looking forward for the coming winter here north of Quebec city. Should be lots of fun.

I have owned this machine for 2 years now, I mow 15 acres every week I used a farmall A for years I looked at all the zero turns and I didn't like the rough ride The other manufacturers of tractors out their didn't compare. You can mow a lot of grass with the Kioti And let me say the cab on this machine is awesome. I live on a farm and my dad is totally impressed with what this little machine can do. Over 300 hours and I have done nothing but change the oil's and filters, and sharpen the mower blades

I love my Kioti CS2520 (JD1025R is it’s counterpart) and I could not be any happier with it! No hate to JD or Kubota, but for the price it’s impossible to beat! I spent half the money on it and got a fantastic machine!

I didn't buy a John Deere because they couldn't put a decent seat on any of my 4 JD riding lawnmowers I've owned, everyone of them were crap within 2 years and I never left them outside. So I bought a Kioti CK3510SE 2 years ago and I love it

@GoodWorksTractors

7 ай бұрын

Glad to hear it!

Ok... I love this little tractor. The cab is great, and whoever the engineer was that added the outside valve for the 3 point... Give 'em a cookie. Genius and that is incredibly useful.

If dealer networks and resale wasnt a thing, all these tractor would be more popular. Until that happens, JD and Kubota will be king. There is obviously a ton of used Kioti tractors, which is why Good Works Tractors seem to be the new official used Kioti tractor dealer. That doesnt take away from the fact that these tractors have better specs than the top brands. I have to hand it to you Courtney, you are a genius when it comes to marketing.

@GoodWorksTractors

7 ай бұрын

Thanks Nick!

@edkruzel

7 ай бұрын

I'm in east Texas, and you can't find a used Kioti, but you can find them all over the ranches here.

This is exactly where I’m at right now! I have a JD dealer 5 minutes from me and was quoted a 2025r with loader and 54” mower for $29,000. Specs were lacking, which is disappointing since I’ve always been a JD guy. JD needs to pick up their game, I’m seriously considering a Kioti.

@GoodWorksTractors

7 ай бұрын

It's good to have options!

@Quilustrucu

7 ай бұрын

Go for it! You wont regret.

My 2019 Kubota B2650 with cab has rear window defrost. Works great during snow removal.

I use my radio. I don’t prefer ear buds or headphones as they greatly reduce your ability to maintain awareness of machine noise. I grew up on a farm and my dad always taught me to become familiar with the noises the machinery makes when it is working properly and he said the instant something doesn’t sound like it normally does, that’s the time to stop and investigate. I’m afraid with headphones and / or earbuds I’m missing ambient sounds.

Thank you. I am enjoying your videos. The small tractor world is a fascinating place. I grew up on a small farm, so had a good basic knowledge. Then I recently decided we needed a tractor because we moved to the country. And my research began. Naturally, it started at JD and Kubota. But the pricing made me look elsewhere. I wasn't even much aware about Kioti. So we went to a dealer. Was thinking CX or CK (hope I got those letters right). Ended up buying a DX. Still under 10 hours, but really enjoying it so far! Anxiously waiting for snow! Edit: Yes, of course. It's the DK4220. With cab, because my good wife convinced me I'm too old to be operating at minus 30 in an open station tractor

@GoodWorksTractors

7 ай бұрын

Sweet, maybe it was the DK Series? One step bigger then the CK.

Good video! Love my Kioti with front loader and backhoe attachment puts this machine in a class of its own. AC and rain this season kept me going without any excuses. Go get one as explained in this vid. This is a heavy duty 🚜 that does not disappoint believe me from New Hampshire!

I’d love to see you use this tractor on the channel for a while. This looks like a perfect size

I appreciate the closing verse!

Hi, Courtney. I think the Bobcat CT2525 also comes with A/C. Made also by Kioti, pretty much.

I believe the reason the john deere 4066 does not have the gas shock on the right hand door is because deere doesn't really want you getting in and out that way. When I get in or out on the right side, sadly, my leg usually bumps the loader joystick ,and that could be dangerous. I didn't say Deere had a good reason ,but my guess is that's it .

I have a ck1025 kioti and love it. mine is a clutch model 2014 and it has 600 hrs on it. I have had nothing done to it other than oil change and normal servicing! Anyone talking trash dont own one! I would by another new one today.

As a recent 2038r owner ($70k total package) I couldn't agree more. The QC out of the factory and the dog shit dealer service, I hope the entire brand goes down the shitter.

@GoodWorksTractors

7 ай бұрын

Man, I'm sorry to hear that. That's a chunk of change to drop and be unsatisfied.

Nice to see you reviewing kioti. They make a hell of a tractor. I’ve owned 2 kubotas and I wouldn’t trade my 2014 Kioti Dk40se hst for any comparable tractor. It’s an absolute beast! The loader capacity is unreal! More hydro flow, weight, fully optioned tractor. The rear lever for the 3 point is very convienant.

Mike with Out doors with the Morgan’s says he really likes his cab tractors

Nice little machine for sure

Was in the subcompact market back in 2021. I have everyone nearby. Multiple Deere and Kubota dealers within an hour, TYM, Mahindra, LS, New Holland, Bobcat, you name it, ,all represented. Comparing specs, pricing, financing etc, Kioti won the battle. My CS, aside from an initial HST leak that my dealer got sorted out quickly and at zero cost, it's been a champ.

@GoodWorksTractors

7 ай бұрын

Sweet, glad to hear it!

I actually like that tractor and strongly considering a Kiotti!

I love that little tractor. That's exactly what I need. I too am worried about the hydraulic lines being down that low so, WHEN I get one, those lines will be dealt with. with.

@petep7227

Ай бұрын

I don’t believe that’s the norm. I think the lines are just run improperly on that specific unit. I have the rops model and loader lines are tucked up nice and tight.

I looked at this machine and considered it to be the only alternative when I bought my b2650. Had to get too large on the Deere to get a factory cab, and their price points are off. I have a Kubota dealer close by, so that was the deciding factor.

Weird, those low hanging hyd hoses are only that way on the cab model - on ROPs they're straight out of the valve block to the loader bracket (vs 90° down on cab). Awesome review - my CX really punches above its weight!

Rear wheel spacers will also help with the balance and it would make the appearance more tractor the Cab

Well I watched this video on the big TV... and just had to get onto the laptop to comment. So how did it taste having the words "2025" talked about lolol. Oh yeah it's all good, and great video of comparison too. Gotta say I came very close to buying the Koiti over my 2025. Thinking a cab tractor is in my future post retirement so we'll continue watching what your getting in stock. Thanks again... your 2025 member.

@GoodWorksTractors

7 ай бұрын

I think about you every time I mention it! Haha, all in good fun I hope you know.

@randalmiddleton8068

7 ай бұрын

It's all good, keep up the great vids@@GoodWorksTractors

Courtney I see you’re picking up what I’m putting down. That’s why I bought my CK3510. Better in measurable terms.

@GoodWorksTractors

7 ай бұрын

Lol, glad we're on the same page :)

I’ve touted my Kioti CK in a few of your videos. Glad to see you’ve finally seen the light of the better orange. What’s with all this armrest stuff? I’ve driven hundreds of hours on my old Case 235 and almost 600 hours on my CK. If I want armrests, I’ll sit back in my easy chair chllin’ with a cool one.

My pretty much identical bobcat ct2535 also comes with heat and ac in the weight class and price point. The Kioti across the street was my 2nd choice, only went due to dealer support in my area. Both good machines for the acre owner or small hobbiest.

@arcticelectric

7 ай бұрын

same parent company

We bought some land and it has some steep mowing (2-3acres of 15-25 degree hills), and a long paved driveway to plow. We plan to try and farm it some day but for now have to keep the land under control. Multiple people have told me ventrac, but seeing prices on those makes my eyes bulge. I can't finance a ton, maybe 20-25k max. We're learning as we go and I know nothing about managing my land other than mowing, grew up a city boy and could use some suggestions

Kioti is brilliant tractor, except 5:52 never have seen this from factory. this is some dealer installation.

Well done Courtney. When can I pick mine up? 🤣

Great tractor review! I wish Kioti still had the CK2510 model. A bit bigger than this CX2510 with a 100 cubic inch engine.

@northernhumidor5615

6 ай бұрын

They do still have the CK 25/10 it’s now the CK26/20 I just purchased one. Love it if purchased with the 4030c loader lift weight is an astonishing 1996 lbs at the loader pins.

That Kioti factory cab is a big step up over the aftermarket built for kubota bx Curtis cab, which is still a great cab for the size. In any surveys I’ve gotten from kubota my 2 suggestions are a “position control” 3 pt setup, and a factory cab….which is actually available on the European variant the bx231

@GoodWorksTractors

7 ай бұрын

Europe always seem to get the good upgrades before we do.

@phild9813

7 ай бұрын

To your first statement, this Kioti compares much more closely with the Kubota LX2610, not the BX. I don’t think Kioti has a factory cab on their subcompact?? Deere has nothing to compare to in this particular size machine.

@phild9813

7 ай бұрын

Actually, looks like they have a “field cab” that you can add on to the subcompact, and it looks great!

I’m a Deere guy and I have to say that’s a impressive little tractor, I would add to the AC in that tractor running a 60” mower on top of the AC that not enough horsepower to do it on hilly terrain, I had a 4710 Deere and upgraded to a 4720 and was told when the put the cab on they needed more horsepower to run the AC compressor so I would assume the same theory applies here, that tractor looks like it was used for snow removal with corrosion on 3 point arms and levers on bucket release, plus a plug on the back for salt spreader power

Bigger displacement and lower rpm’s are generally more fuel efficient than smaller displacement higher rpm engines. Emissions and new engine technology can change this somewhat in certain cases.

@GoodWorksTractors

7 ай бұрын

Thanks PN!

Looks like telescopic link arms are an option on the 3 point arms (assume this means the ends of the arms). They do not mention telescopic stabilizers as an option. But the armrests are standard on the CX, while they are optional on some of the larger models (CK & DK models), not sure why there aren't standard on ALL of the models, especially with CABS!! Anyways, have a good one!!👍

well enjoyed your video on the coyote tractor nice been waiting for some changes to buy a new john Deere 3046r open station but no armrest on the seat still have to climb up on the tractor for the fuel fill and loader joy stick not vary comfortable positioning and worst of all increase in price come on john Deere have to do some serious thinking also i got real bad services at a john Deere dealer in Lapeer Michigan thank you for your videos and all the good information

I have a BX2380 with a cab no AC but plenty of windows to open so no big deal. I got the cab for the heat in the winter which is when I'll be using the machine the most.

This is an enticing combination. It could do everything i do with my old Kubotas, but in air conditioned comfort! The main downside I see for myself is that i do occasionally put my tractors through some silly areas where the cab would be a constant worry (tree branches, etc). For whatever reason, when our head is out in the breeze we're pretty aware of when things are going to hit it, but if you put a cab around it i feel like we get a lot worse at noticing that some contact is about to happen.. Anyway, great vid, keep it up!

I have the open station version of this Kioti. I do not have the rear controls on the 3 point but wish I did. Mine is not equipped with the 12 volt and USB that he mentioned. Again would be nice to have. Mine is not an HST and seems stronger than my brother-in-laws 30 hp New Holland with HST. I LOVE my Kioti only regret is I don't get more time on it. As my regular job gets in the way.

Man do I ever look forward to your new segments.

I have a 1023, don’t get me wrong I love it! But these kioti’s are really growing on me. When it comes to replace mine, or need another I’m going to get one of these

Bought a CK2510 (non cab) a year before CX release (99% same tilt wheel, pedals change) beast of a tractor. I've used all brands and shopped all and at the end of the day Kioti got my money no regrets..thanks for showing these tractors.

Beautiful tractor! Can you attach a backhoe with the cab in place?

Even as a born & raised green tractor guy, the Korean tractor and equipment companies have some promise and some well thought out designs and features. I think Kioti has more market share and has been around in the US longer than any of the others and I like this model quite a bit. There’s only one thing that gives me pause with Kioti and that’s the dealer network. Kubota and Deere both have two dealers that I pass close to on a regular basis. The Kioti dealer is 30 miles from me and the hours make it so that I could only get there on a Saturday morning. Unless I move closer to that dealer or they open a branch closer to me, it leave Kioti out of consideration . . . for now.

Nice tractor and overall more capable than the equivalent size Kubota and John Deere. I don’t have a dealer in my area so I ended up going with a Kubota.

@GoodWorksTractors

7 ай бұрын

I'm finding dealer support is not a real thing anymore. I've currently got a JD machine that needs a leak fixed under warranty. Two different JD dealers near me. It's one month before I can get in to one of them, two months before I cand get into the other. My JCB tracksteer has been down for over 3 weeks now and still hasn't been looked at. Another warranty issue. I have stories on just about every brand of dealer around me. Perhaps it's unreasonable of me to expect equipment to be fixed faster than that.

@DonnieDarko727

7 ай бұрын

My Kioti dealer picks up and returns my machine for a small fee. 2 hr round trip

You make some valid points...but....The closest Kioti dealer to me is 60 miles away. Deere has 4 dealers that are 60 miles or less. The closest one being 4 miles from the house. That played into my decision to go with the 2025R.

The hydraulic lines on the loader are installed backwards. Mine were installed the other way with the elbows up on the loader frame and straight out of the valve body that gets them up out of danger

Really enjoy your videos and the content you put out. I just sold my John Deere 1025r and I'm looking to get a larger tractor, im currently considering the Kubota L2502 and the Kioti CK2620. Just curious of your opinions between the two.

On the Kioti website, it says that the mid-mount mower is compatible with the loader and the backhoe. but I cant find what that actually means. does that mean, I can run and use or just lift the deck? I cant find a video showing that.

John deere has deep roots, proven reliability, unlimited parts,a dealer every 50 miles . My Grandfather bought a new John deere in 1939 and my brother now owns it and still able to get part's.

@GoodWorksTractors

5 ай бұрын

Unlimited parts? How come they have to order parts every time I need a machine serviced? On that note, what good is having a dealer every 50 miles (I have two dealers within 25 miles) when I can't get in for two months? How's that reliability and service for ya? What do deep roots have to do with anything? They charge way more for less capability than every other tractor brand on the planet.

@Kevin-sj2pq

5 ай бұрын

What do they use to harvest plant corn and vegetables and wheat. And Cotton? jJOHN DEERE I've not seen a Kioti Combine.

The orange paint is off a couple shades and it has a funny name on it. JS 🤣

there is tsb for the loader line to flip them and put the 90s at the loader end.

Yeah no reason to buy a John Deere unless they really step up their game. I went with an LS 342, it out specs John Deere in every category. Thank you for all of your quality videos, been watching you for years now.

@GoodWorksTractors

7 ай бұрын

I like Deere, but I also like value.

That tractor is fantastic

My cousin has this machine the only complaints I have is the bucket is actually about 1/2 inch narrower than the machine so your tires are stuffing against the banking when digging, and my legs get cramped quickly.

Hoses for loader on wrong. 90 degree go on other end angled towards engine to be out of way. Yes, telescopic links are a option, same with link peddle.

I would have liked to see about a Kioti but there is no dealer around here that I know of. Dealer support is important or should be to anyone buying anything no matter what it is.

The hydraulic hoses are installed backwards, the 90 degree goes on the top/loader side.

Not a lot of Kioti dealerships in the Northern MA/VT Area

I have done a ton of summer brush hogging on 5 to 18 acre lots, and a ton of winter snow removal in driveways. I use my John Deere 3038 E and wish so many times over the past few years that they had offered a cab. As for looks, I really do not see any goofy in that Kioti.

@GoodWorksTractors

7 ай бұрын

Yeah, the 3e Series is a value series, so I don't see them offering a cab on that one.

Yeah might be a great tractor, but what type of support am I going to get. Kioti lists 2 dealerships in MN. Deere and Kubota have a vast dealership and parts network throughout the US. Just keep that in mind.

Can you do a Massey soon? That’s my fav and I think they’ll outperform Deere

I don’t know about the tractor looking goofy with the cab. When you are pushing or blowing snow and it’s-25 degrees and the wind is blowing 20 mph, that cab is going to look beautiful. When it’s nearly 90 degrees in the summer and the humidity is in the90 per cent range and the bugs are swarming, that cab is going to look great. Nice to be out of the dust too.

Yep I really like that too

I have a ck2510 it's 7 years old with 800 hours and would love to have the cab.

Yeah I’ll can’t wait until it snows to use my tractor, but if I didn’t have a cab I probably wouldn’t use it much when it’s snowy/windy/cold. Rain too, didn’t stop me from fixing my gravel driveway when it started to rain. If I didn’t have a cab I probably would have stopped working.

Around where I live if you want dealer support Deere and Kubota are your only option. I have a 2022 2038R myself and love it! I haven't found anything it won't lift to be honest.

@GoodWorksTractors

7 ай бұрын

My JD dealers are 1 and 2 months out to fix a leak on an under warranty issue. I'd gladly drive an hour if I could have a dealer that would fix it in a week.

@aaronrroy

7 ай бұрын

I called my kioti dealer and they picked up the tractor a week later for warranty work

@rcwayt4020

7 ай бұрын

@GoodWorksTractors must be your area. My dealer is not that way. I called when I had a leak on my old 1025R, they picked it up the next day.

@rcwayt4020

7 ай бұрын

@aaronrroy my dealer usually gets mine in less than a week. I know all dealers are different tho.

Really good specs but injection pump when out at 50 hrs on my friend

Is that engine really 87 ci, or is it 100.5 ci? The spec sheet says 1.6L and lists the model number for the bigger 100 ci engine. I’ve looked up numerous resources and can’t seem to reconcile the answer. Somewhere there is a misprint though.

What is the top speed in low gear? I see high is listed at 10.7 mph

What are your thoughts about the CK2620?

Uh oh, it's a Kioti. Messick is going to come for you, lol. I like the Kioti. Honestly, I have been unimpressed with the power of the lower JD models.

What is it like in comparison to the summit

can you tell me that it has a better than a kubota 2610 or a 2025r john deer

Does kioti have a good heavy duty commercial front snow blower for the 2510?

@dkaifetz

3 ай бұрын

KS54-180CFM is a great blower and the only one for this model Cx2510. I have one and love it.

Can the Kioti run the rear mid PTO at the same time? I know the 2025r can. But wasn’t for sure about the CX

@dkaifetz

3 ай бұрын

Yes