That cooler is using what is called a peltier device in the center section which isn't a new techology and has been around for many decades. I remember even buying one that was designed for a cpu cooler back in the 486 days. The problem with peltier devices is that they are not very efficient and because you can't get something for nothing, they generate lots of heat on the side opposite the cooling side. Just think about it this way, if peltiers were the greatest cooling devices in the world, they would be used on every cpu an gpu right now.

@christopherdedeck

9 ай бұрын

I 100% agree. That is why the peltier module had its own fan! I think there is room for this if the module wasn’t throttled down by using USB power.

@alexishernandez5966

9 ай бұрын

@@christopherdedeck I think this will be great on a modified DELL XPS laptop because it have a full metal body, when you put thermal putty between cooler and the back case it self it can be it own heatsink.

@christopherdedeck

9 ай бұрын

I think you got the from Zac Builds, right? I was pretty intrigued when you slathered all that thermal putty down. Maybe I will try something like that, however, my main issue is the heat on my SSDs. I think they heat up so much because the lack of airflow in the middle of the laptop chassis. I think if the base was slightly thicker, temps would dwindle significantly. I just do not know how to give that a proper test

@rflett5797

9 ай бұрын

@@christopherdedeck IMO direct contact is the only way for that peltier to even do anything. The amount of cold it puts out is so small that there is no way it can significantly cool down airflow from the fans. It is like a refrigerator with the door left open.

@christopherdedeck

9 ай бұрын

@@rflett5797 more contact is definitely a requirement. I have no idea why the pad was not completely flat onto the computer. However, the bits that it did touch was directly under my SSD and it did indeed cool down my SSDs. Typically they would get extremely hot. I really think there’s something here, but it wasn’t done optimally.

Your content got me the IETS, absolutely love it. Great work my friend

@christopherdedeck

9 ай бұрын

It is a little loud but beats overheating 10 fold. Thank you Bryan!

Another good content to watch before sleep

@christopherdedeck

9 ай бұрын

Much love Leexy🙌

This cooler seems to work effectively on laptops that have the bottom panel on contact with the internal cooling

@christopherdedeck

9 ай бұрын

Most laptops have the internal coolings where the vents are. If it was in direct contact then it would restrict airflow going into the laptop. Good idea though!

@christopherdedeck

9 ай бұрын

Thinking more about this, the vents suck in air from the far left and right... SO, using a peltier styled cooler in the middle may be game changer. My other thought is that the SSDs get hot and airflow is restricted back there. I think Ill give this a test next: amzn.to/3Pv5QcA

@ElectroWolf_Arts

9 ай бұрын

​@@christopherdedeck i just remembred the MAC Air laptops which they dont have a fan at all , but they have a big piece of aluminum to cool it down so that cooler fits perfectly

@MrScruffy32

9 ай бұрын

I hope my wallet is ready for the day when you find the best one. Thanks for your videos, keep up the good work 😊

@user-qx8xt2yz1w

7 ай бұрын

@@christopherdedeck yeah i saw that one also... it looks promising and i believe there was 1 other Peltier / TEC enabled laptop cooling device on amazon. If I find it then i will send you the name

bro nice vid! What's the name of your laptop stand?

Thanks man.

Helpful video, thanks for making. If you could summarize the info in a clear table at the end it would be even more helpful!!

@christopherdedeck

8 ай бұрын

Not a bad idea.

dude i made my friend buy the speakers back in the day that you have!!!! i just got a blast from the past !

i think it depends on where the laptop has its airflow holes located. if it happens around where that coolling pad blow its air, it will work perfectly. especially if the airflow holes has in and out circulation synchronize with how the cooling pad works. . cooling the laptop from the touching pad wont work well like how CPU cooler works because they are not materials that spread heat to the bottom. especially if the laptop doesnt have any of its cooling pipe touching the area there

@user-qx8xt2yz1w

7 ай бұрын

thats true unless you want to have a near ice cold touch pad and keyboard lol.... again i think the issue for him was the rubber feet interfering with making proper contact

I'm your 555 subscribers, remember when you are famous. 💪 keep posting.

@firstnamelastname7675

3 ай бұрын

He won't cus he's not going anywhere 😂

i just realized that every cooling pad video i saw was from the same exact guy... this man is insane he set out a quest to find the best cooling solution. unhinged, what a madlad.

@christopherdedeck

9 ай бұрын

LMAO, I AM GOING CRAZY

@whitygoose

9 ай бұрын

@@christopherdedeck recently i bought nvme heatsink cooler with active fan for $20, it quite effective.. try it dude.

Hello @Christopher DeDecker , I use the external monitor to power the laptop cooler, is this better?

I was looking for this content

@LordHeat.

Ай бұрын

Same with me bro

Big question, on end of the video and work on gt500... You turned it off, because it was overheating laptop soo badly ????????

probably you need to try external high wattage wall adapter. these peltier modules need a lot of juice.

Perfect cooler for my MacBook Air

That was a great little test! I am left thinking however, if the peltier was still cool at the end of testing and your system wasn't, it means the peltier either wasn't making sufficient contact, or not making contact where it needed to. I would love to see you repeat this test in the future maybe with above in mind, and a decibel level wouldn't go amiss either 🙂 Great little channel friend, I subbed to see what you do next!

@christopherdedeck

8 ай бұрын

I found that it was touching the laptop, but the pad itself had a slight curvature, So it wasn't making 100% contact. Nice point, though. I think there is something to this peltier cooler, just needs to be made with higher specs and higher quality

A Laptop stand is sufficient enough for me.

good video bro.

@christopherdedeck

9 ай бұрын

Thank you man!

I'm a Mac guy so forgive me if I am asking a noob question, but are the tempurature readings a built in setting on Windows? My MacBook Pro runs too hot on some games (yes there are some games you can plan on a Mac), so a cooling pad is of interest to me

@ThriftyTV

2 ай бұрын

I'm not a professional or what but from my experience, mac isn't for gaming... well I haven't tried a lot of unit of mac probably 2 units only. But the temps are just awful, when you play high end games. So try to watch a reviews of IETS GT500 or you can go for a GT626 if you have more budget for it. Or Ilano v12 (same performance as GT626)

Peltier cooler only works with metal build laptop like the MacBook, it doesn't blow cool air but conduct heats

what app are you using to measure the temps

@christopherdedeck

9 ай бұрын

MSI Afterburner for CPU/GPu temps and Disk Drill for SSD temps

When i was a kid my dad didn't want to get me a new laptop so to fix overheating so i got a big fan then i slided my laptop fan to the edge of the fan and turned the fan I reached 20c

you must test the cooler using thermal camera

They need to work on a freezing pad/fans for laptops

This would be good for a thermal pad modded macbook air but anything else probably not Maybe a iPad Pro used for drawing maybe?

Laptops wouldnt need a cooler if the design isnt stupidly slim.

@christopherdedeck

9 ай бұрын

Yup. I was thinking about finding a way to 3D print a larger shell to try it out, but I am unsure how to go about that

@christopherdedeck

9 ай бұрын

Honestly, I could probably remove the back portion and place it on my IETS GT500 and it should have a simialr effect.

Bro have you considered repasting. Those temps look insane :(

The PC Modder in me goes HUMMMMM.....Looks like there something that can be done with this to improve its performance. Upgrade the Peltier coolers power supply by using a 12 volt power supply (adjustable) and use some foam to form a seal around the laptops bottom to force that cooled air through the laptop. What dod you all think, is it worth doing?

@christopherdedeck

8 ай бұрын

The perltier pad itself doesnt cool the air. The pad is supposed to make full contact with the bottom of you laptop, which is doesnt because it has a slight bow to it. I do agree, however, the peltier should have came with a 12v power supply with stronger fans. That would have gave solid results.

@user-qx8xt2yz1w

7 ай бұрын

@@christopherdedeck that would be interesting

wait, peltier, type C charger is fine but the power's from Laptop's USB? It need more power than laptop's USB power. maybe adapter or fast charging travel adapter. my peltier's phone cooler take around 27W with 9V 3A or 12V 2.5 A. and it gone 0C in just 15 secs.

@christopherdedeck

8 ай бұрын

Exactly, they missed the mark here. They should have made it a full 120v

I think you should try with an external charger instead of plugging on the laptop, it may be power limited

@christopherdedeck

8 ай бұрын

Smart suggestion, but thats not the case with this one. The USB-C supplies sufficient power, its the USB-B it used that would be the bottleneck. But, its really down the small peltier and the weak fans. They should have made it use a standard wall plug in with larger fans and a larger Peltier cooler.

@Juvenlus

8 ай бұрын

@@christopherdedeck Thanks for reply! If I am not wrong, on the laptop it was an USB-A port, it is not only usb-C from the source side that can be `power delivery` with high watt?

@user-qx8xt2yz1w

7 ай бұрын

@@Juvenlus i have the same laptop cooler and instructions say 5V/2.5A or 5V/3.0A power source AND they say to use their usbc to usb cable and they say not to use a fast charging power adapter, which i am currently doing as i dont have anything else to use for the moment -I am using a samsung 5V/2.0A power adapter and the results are not that bad when you figure out the physical position of the laptop to sit directly on top of the cold plate. In some cases the rubber feet maybe need to be removed because direct contact to the cold plate is absolutely required for even minimal results

I have a strong feeling with the design of the cooler that it isn't made for gamers, compared to the LLANO and GT coolers

iets gt500 or petier ? Whats your recomendo please?

@christopherdedeck

9 ай бұрын

IETS GT500 for sure

which MSI laptop is that and specs...?

@christopherdedeck

9 ай бұрын

MSI Creator 15 with the 3080.

Peltier cooler works better on cooling toasty hot mobile phones i bought a phone cooler that costs roughly $20 my phone constantly at 45-50C celcius while gaming and it'll start thermal throttling then i put that cooler on my phone and the temperature drops to 38-40C Celcius And peltier cooler works better with high wattage phone chargers I used a 33W Charger on my cooler

bro saying that 26 degree celcius in a room is preety hot . lol I live where its normally 34-38 degrees

Is that a gigabyte g5 laptop? It looks a lot like my g5ke.

@christopherdedeck

9 ай бұрын

No, I ahve the MSI Creator 15. The Gig looks pretty sick though! Its a pretty good price too, I am impressed!

Keep chasing your dreams

@christopherdedeck

9 ай бұрын

Appreciate it man!

Or, instead of arbitrarily making super thin laptops that don't have any form of real cooling solution under the guys it's to make it slim, giving you terrible cooling and at an extra cost for the form factor, while costing them less to make. Maybe they could actually just make a proper chassis with a proper cooling system. Do you want to know how many gamers who buy gaming laptops specifically want one that's really thin? Almost none. You're buying it two game, you're not buying it to take to your office. And even then you could easily still do it. The real problem here is the fact that people have to accepted the way things are, and nobody speaks up against these so-called gaming laptop companies. Lenovo does a decent job of cooling on a lot of their legion

What is the name of the laptop?

@christopherdedeck

4 ай бұрын

This is the exact Laptop I bought mine from (I bought it refurbished): amzn.to/3IkdbaJ

@tacticalnuke420

4 ай бұрын

@@christopherdedeck thanks man ✌

158*F is *not* 7*C.. it’s 70*C had me worried since 7 is below room temp

@AutoMotivate

9 ай бұрын

Oh geez, I don’t remember saying that 😂 oops!

I immediately just red flag any coolers that need to plug into your laptop

@ashutoshjha9147

3 ай бұрын

Plug it in to external power source.

@atharvapallikulam9743

2 ай бұрын

Are you even 1% familiar with technology?.... How else in the world are you supposed to power a cooling device? Literally just use any usb power source ever, if you're shit worried about privacy.

This cooler really need piece of foam. Without it the wind will go everywhere which doing nothing for the cooling.

@christopherdedeck

9 ай бұрын

It needs the foam, a flatter/larger/movable petliter, and a strogner fan.

Drop your setting man.. thats stutter hurt

IETS gt626 is the king of coolers

@christopherdedeck

9 ай бұрын

I can not seem to find that one. I see people writting about it but no links. Could you send me the link here?

It's so freaking loud lmao

@christopherdedeck

9 ай бұрын

Sounds like it’s about to take off 😂

Poor implementation of the tech. The power issue is part of it. 30W peltier at best. Also, they needed to chill the incoming air. The peltier pad is never going to work well. Abs plastic is a poor thermal conductor. Being in the middle most is the air is pulled near to fans near the hinge.

590th subscribers!

@christopherdedeck

9 ай бұрын

YEEEYEEE

the pelier is very inefficient at cooling, also it has no direct contact so it does nothing!!!

@christopherdedeck

9 ай бұрын

There was direct contact and it did indeed cool down my SSDs.

GT500 laptop cooler is better

Moral of the story: All these laptop coolers are trash, don't spend a penny on them.

Kinda hate this review. You used a laptop that is incompatible with the product and claimed the product was false advertising.

@christopherdedeck

5 ай бұрын

The cooling pad cannot lay flat, it doesn’t get all to cool and the fans are weak.

gt626 is better

@deraw94

4 ай бұрын

Do you even have a gt626? 🤔

HAHAHAHAHHA Just look at the KLIM Mistral. Its 100 times better.

@christopherdedeck

9 ай бұрын

My goal was to see if the Peltier has any decent cooling properties. The GT500 cools the laptop down perfectly

dude i am getting seasick, why edit every second calm down with the editing please

Sorry, Chris, absolutely hate your editing style.