We need a "pain in the arse" counter

@KVAR42

Жыл бұрын

I love he'll say Arse but then F word later comes out lol. Good guy

@beanpwnz

Жыл бұрын

Lmao i came to the comments just to see if someone said something about arse.

@damfacker1134

Жыл бұрын

It wasn't a pain but it sure was a nice "arse" in 5:51.

@williamh.gatesiii8183

Жыл бұрын

Good god why do they say that. Wtf is an arse

@astro143_

Жыл бұрын

What a pain in the arse

Take a shot every time Alex says "pain in the arse" to speedrun liver failure

@bradtucker5859

Жыл бұрын

That's his Newfie slipping out

@zetdaripper

Жыл бұрын

For real wtf. Haha. Clearly nervous or something.

@donc-m4900

Жыл бұрын

Or Rushed.

@theglowcloud2215

Жыл бұрын

@@zetdaripper Maybe he'd violently sharted himself and was just speaking truth to power.

@jakekgfn

Жыл бұрын

I went blind from all the shots

Seems that Alex found a way to make us know where he felt physical discomfort after his long flight 🤣

Cant believe we haven’t seen more removable MB trays before this. Such a great idea

@ArcGG

Жыл бұрын

this NEEDS to become industry standard moving forward!

@ronnyspanneveld8110

Жыл бұрын

Dark Base 700 (from 2017) , SilverStone TJ08-E (from 2011), LANCOOL 315 (from 2020), Lian Li D8000 (from 2013) if you need more just ask i got like 900 more..

@MGlBlaze

Жыл бұрын

We did, but it wasn't a common feature.

@Rokomarn

Жыл бұрын

Seems like a gimmick

@juggalo17

Жыл бұрын

I'm going to comment about how you're wrong and this has been around for 20+ years because I can't detect sarcasm over the internet.

Lian Li was always a step ahead of the game

@J.I.D.999

Жыл бұрын

I thought NZXT was beating them w the H9 and the new Kraken coolers but when I saw the LCD fans there is no competition

@Momotaro0125

Жыл бұрын

​@Telescope the glass only corner has been done way before the H9 and by much smaller companies.

@jayzha07

Жыл бұрын

Coolermaster has the best prototype case where you don’t take the back off you plug the cables from the front it was in gearseekers video

@yeejay6396

Жыл бұрын

​@@jayzha07 cool beans

@psychoelitenz8380

Жыл бұрын

Phanteks is just as good

Drink every time Alex says "Pain in the arse".

@Spice

Жыл бұрын

I'd rather not die of alcohol poisoning thank you very much

@dc4851

Жыл бұрын

it just doesnt sound right coming out his mouth

@robertthomson1994

Жыл бұрын

was literally about to say the same thing lmao

@WithMk

Жыл бұрын

im drunk

@gonzalogamez6035

Жыл бұрын

Came into the comments just to say the same thing

Desk definitely needs an integrated wireless charging zone

@Meganomaly3

Жыл бұрын

yes as long as its not too much of a pain in the arse

@oneblacksun

Жыл бұрын

I would focus more on having a type-c connection with like a 45w output.

@MuLK3y

Жыл бұрын

@@oneblacksun You can only just catch it for a moment but they have IO on the front of the desk. I looked on the website and it will have Type-C on the IO.

@leonro

Жыл бұрын

​@@MuLK3y That's PC IO though, it won't do 45w of charging. I think replacing that USB-A with a USB-C PD plug with 45W-65W of charging would make this desk also be good for charging a laptop, or really fast phone charging. It'd be fun if they integrated wireless charging in that USB cylinder thing, so that it's clear where it is.

@m3talcloud164

Жыл бұрын

Wireless charging. Move the drink holder further back and to the side so I can push my keyboard far to the left. Cable management for my peripherals. Dust filter on the intake. Make the right-side bin deep enough for a controller (and maybe headset). Give yourself room at the back corners to attach aftermarket pedestals (winglets) for speakers. Play to the aftermarket/modding crowd with considerations for stream deck and DAQ placement.

Nice upgrades from Lian Li, and also a nice upgrade from LTT, "Love to see it" has been upgraded with "Pain in the arse". Good job guys.

Lian Li has gone insane. In a good way. All of these looks awesome AF

@fynkozari9271

8 ай бұрын

I never understand Lian Li case, it's too thick, u need a bigger desk. It hides the PSU in the back so u can't see it, rgb or not. The worst part, u have to shell out more money for the excessive amount of fans. Meanwhile air flow cases such as Phanteks create a vacuum with only 5 fans. One of the best temperature ever.

@01dom

7 ай бұрын

why would u want to see the psu @@fynkozari9271

@Generationbetrayed

6 ай бұрын

@@fynkozari9271 But it's not as fun, and it dosn't look as good. We dont want to be boring. Do you work for Phanteks?

Feeking old when a removable motherboard tray is an innovation.

@Adahop

Жыл бұрын

I miss those days.

@nadtz

Жыл бұрын

I was thinking similar. Used to be the norm.

@mycosys

Жыл бұрын

One that doesnt cut you is pretty cool tho XD

@wembleyford

Жыл бұрын

@@mycosys Thay's fair

@blackrippin

Жыл бұрын

3DGameMan sends his regards

Alex's enthusiasm is infectious. Lian Li cases have never failed to impress me with their quality and I always enjoy building in them. My own PC uses a Lancool II Mesh.

Always Love Alex's enthusiasm, Seriously Makes me want to get the credit card out and go nuts. lol Sincerely, TY for another awesome video with Alex.

On the 011D EVO XL, instead of having that grommet there should just be an included adapter that is basically a display extension that takes place of the grommet. That way you can just plug the cable into the back of the case instead of having to fish it through.

@ginjafox9509

Жыл бұрын

While I do like this idea and think Lian Li should think about something like this, you also have to consider how many cables of various combinations they would need to support. It might drive up the price by a significant amount or just be unfeasible.

@siedenburg1

Жыл бұрын

​@GinjaFox could be made optional as a 10-15$ add-on. So you could also choose between various dp and hdmi versions

@ionstorm66

Жыл бұрын

Also they offer that bracket for the current O-11 EVO, that isnt new at all.

@BrickTamlandOfficial

Жыл бұрын

@@siedenburg1 you can also get the same cables from a third party already.

@siedenburg1

Жыл бұрын

@@BrickTamlandOfficial i mean made for the case so that the lenght is correct and the end does fit where the rubber thing is (perhaps with a screw in clamp design)

Drinking game for this video: every time Alex says "arse." ;)

Loved this video and the way the content was presented. Alex you are doing an amazing job there’s, your enthusiasm for new tech and the way you go about explaining things really really cool 👍

That O11 vision is perfection. Was hovering between an O11D Evo and NZXT H9 Flow for my build this summer and the vision just took the H9's killer feature

@CookieCaty

Жыл бұрын

What do you mean by that? Sorry for asking, I'm kinda in the same situation :D

@yasgamer

Жыл бұрын

The seamless "aquarium style" corner. My desk is laid out in such a way that I'd have that corner pointed at myself.

@Justme-jp8ih

11 ай бұрын

Exactly!

@Justme-jp8ih

11 ай бұрын

Also the stuff to connect is on the bottom at the front, which is just perfect compared to the other ones that either have it on the top of the case or upper front part, which I dont like since I want to put it on the desk

Has Alex only just discovered Arse?

@jody024

Жыл бұрын

100% yes.

@CarlosLins1

Жыл бұрын

And felt pain

@hamza5094

Жыл бұрын

the reason is here 5:53

That AIO with the solid diffused puck and infinity mirror in the center looks sick! the fans with the screens in them are cool too, Lian li have you ever considered making a reverse style blade fan with the infinity mirror on the hub like how phanteks does with their reverse style fan blades?

@tlreclipse1126

Жыл бұрын

That caught my attention more than the GPU in the front of the case.

@roblox21242

Жыл бұрын

which one is that one? the LCD?

I love lian li’s risk taking and innovation. Super impressive stuff

I have an old Lian Li case that had the separate motherboard tray that slid in from the back. I loved that feature and glad to see them putting it on new cases.

Those all cases make some pain in the ARRSS.

For that DK-07F PC Desk, I feel like they really needed to add a wireless charging area for both mice and phone. They also should consider making the hub at the top a high power USB Type C port. One of the nice things about a desk setup like that is that you can easily transition to a laptop for work, and having a way to fast charge your laptop or mobile devices would be neat.

Great presentation, Lian Li’s new range looks very exciting and beautiful!

I've always been pleased with Lian Li cases. I just ordered the Lian Li II Mesh RGB for my latest gaming build.

I love lian li's cases for their quality. However not so sure about the weird GPU orientations. Looks like more of a trend than actual practicality.

@bigchief9313

Жыл бұрын

Yeah duh it’s just decoration Jesus Christ

@yeejay6396

Жыл бұрын

​@@bigchief9313 indeed

@djaskfjkasd

Жыл бұрын

You'll loose 1/2 a meter of cable length too...

@JamesLikesCoffee

Жыл бұрын

Yeah, the GPU orientations are a huge pain in the arse

@daunted2322

Жыл бұрын

@@bigchief9313 absolutly unneeded hostility and you should calm down.

Tbh for only 140 the o11 vision looks and seems awesome, i just wonder how good cable management would be

I've been planning to mount my GPU like the EVO XL, beside the motherboard straight up down, then having all the intake at the bottom exhaust the top. Glad to see an OEM solution you can just buy

Great video. This was a lot more hand on than a typical Convention preview. Awesome! Thank you. There's so much i want. Hope the Lian Li case isnt out of stock like NZXTs H9 has been.

The cooling cup holder absolutely NEEDS to be resizable! It was be so cool!

I have been eyeballing the O11D EVO XL since last year and I am glad that it's finally releasing. This is definitely going to be my next case.

@Mr-zu4bv

Жыл бұрын

U know when the release is?

@VeloxusGaming

Жыл бұрын

@@Mr-zu4bv Q3 2023 so somewhere between July and September.

@user32352

Жыл бұрын

will you be doing 3 420s? or just centering a 360 and leaving the extra space, im wondering how it looks with normal mounted GPU and a a centered side exhaust where the vetrical gpu will be, not sure if lian li makes 420 rad's so im torn. would want to see how they look fully built but sell out on day one is going to be a thing

@The_Punisher202

Жыл бұрын

@@user32352 sell out ain’t a thing if you use bots 🤷‍♂️

@RathalosEmperor

11 ай бұрын

i just bought the O11 XL fuck..

I'm doing my first build right now in a Dynamic Evo. Really love these iterations.

Gorgeous cases. Top glass is a genius thing for anyone who has their desk on the floor. I still think im a sucker for the Phanteks NV7. the back door for cable management just has me smitten. Always liked their desk cases, but you're likely going to put a desk mat on it anyways, and if you don't, well you see how many prints were all over it. But Lian Li's innovations are always next level. Industry leading for sure.

Lian Li desk needs to have a very large wireless charging area with fast charging hub and card reader.

Removable MB trays were pretty common years ago, I never understood why they went away from that

For the desk, +1 to wireless charging, height adjustable, acoustic proof and space for optional console - could then double as a TV stand for the lounge

lianli cases look amazing! maybe when I dare to do a custom loop for watercooling i'll get one, but with my current setup it's more about airflow than aesthetics.

Anyone knows the name of the keyboard on the desk at 5:53?

@JDefends

Жыл бұрын

Keeping an eye out for the same thing...

@AngryAngryAsian

Жыл бұрын

Roccat Vulcan pro

@antftwx

Жыл бұрын

There was a desk?

@lucassilvas1

Жыл бұрын

@@AngryAngryAsian thanks

Plugging your display cables INSIDE the case sounds really clean aesthetically! I'm sure some people would love this.

@sulylunat

Жыл бұрын

Your cable is still coming out of the case regardless. The only thing you eliminate is the plug really which I don't see as a huge issue anyway. I'd be much more impressed if they had a full cable shroud at the rear to hide all the existing cables and allow them to drop to the bottom. My case sits sideways to the right of me so in normal orientation the cables would all be facing outwards towards me. I have an inverted case just to have the cables come out the other side instead, but I'd love to have a nice cable shroud and use normal orientation.

The can cooler on the desk is an okay addition. Id hope it's pushed further to the back of the case so you have more clear (flat) workspace. I think a pop-up ac plug(s) would be nice too since getting behind or under the desk to do some other hobby work (like light soldering or something) would be a pain.

Routing the display cables is easy once you go with extensions. I have the O11D Evo with the upright GPU (perpendicular to the motherboard) AND I inverted it, which is a feature with this case, so the DP and HDMI cables route from the front/bottom to the rear/bottom. Using an extension, I have a female DP and HDMI ports poking just outside the back of the case.

Lian Li just needs to have the Infinity fans with reverse airflow, like yesterday. Then they will be undisputed kings of this space.

@PowerPunch360

Жыл бұрын

They're listed on their Computex page, but only the 120mm version.

@theskywalker8416

11 ай бұрын

thats all i need

Those cases with the unusual GPU placements would SUCK if you play VR and don't have the headset plugged in 24/7

@Karpata1

Жыл бұрын

You could add a small extension cable that you leave plugged in 24/7 instead

@c1ap3k_

Жыл бұрын

so you're saying the sound would be a pain in the arse?

@TorvicIsSanta

Жыл бұрын

@@Karpata1 honestly at a slightly offset price it would probably be nice for lian Li to include such an extension of the perfect length for displayport

Was there in taipei just an hour ago, cool stuff

Those Front and Rear GPU mounts are pretty sweet and what I would love is if they put on the rear of the case "extenders" so you still have the rear plugin or even better a built in KVM Switch!

WHAT!? This is mind blowingly useful and so simple. I would LOVE to build outside my case and then drop it in omg. Build like a test bench and house like a home computer. Lian Li is something else and I love it

@jfolz

Жыл бұрын

Look at the Jonsbo VR4. It's all mesh all around, so thermals are amazing, and the whole inside of the case slides out the back. You're left with just a skeleton of a case with no panels in the way. I got one a few weeks ago and it was a breeze to build in.

@flyingtentacle7631

Жыл бұрын

You can literally do this without any special case though. It's not like you can route power before hand with that case, so it's really no different than building on the mb box like everyone has been doing since 1483.

The theme of this video seems to be "a huge pain in the arse"

my O11 dynamic was a pleasure to build in. I truly think its one of the best looking case out there. But this looks soooo clean.

I'm doing pretty good with my O11 D Evo in right hand mode. Last time I had a Lian-Li before that was a PC70 many years ago.

Motherboard manufacturer: We should put the PCIe slot for GPU as close as possible to the CPU to minimize latency. Lian-Li bust in with their 1 meter riser cable: The hell you are!!!

While the cases are super nice, and the weird GPU orientation interesting, the most interesting question is just how much caffeine was crammed into Alex's system before recording this. xD

most hilarious computex lian li booth coverage on youtube!!! 💯 💯💯

i have an OLD Lian Li case in my house. yes, older than you are thinking. it's a RocketFish branded box, built by Lian Li, a full tower, all aluminum, and it came out in the era of DDR2 systems... which it still has in it. a core2 quad with an old 4000 series radeon card in it. it's still in fantastic condition, no corrosion, the front door opens smoothly, and the 2 spring-loaded ball bearing door keeps are still holding the door shut nicely, and they offer a satisfying click when you open or close it. pure quality. i also have one of the original 011s that my son is running, great looking box

Love Alex’s confidence & no Fs given to critique their stuff right in front of them 😂

@SplyBox

Жыл бұрын

Lian Li has always been receptive to meaningful critiques

How do you make a desk pc and NOT have a wireless charger???

Bought a Lian Li O11 Dynamic EVO a year ago, they are great cases. That being said I had a design issue in mine, if you'd put the power supply on the bottom slot you would have problems installing the GPU (The anchor feet would come in contact with the PS thus not allowing proper connection for the GPU not being fully slotted in). Had a 10 degrees difference on my GPU compared to my old case where it was fully in. Drove me crazy for a few days trying to figure it out 😂. I don't know if others had the same issue but just in case you have 2 options, put the power supply in the upper slot or slightly unscrew the MB pins of the case (to give more space).

The SUP also has one more advantage, most of the airflow doesnt pass from the motherboard, which most likely means reduced dust (albeit at increased VRM thermals which shouldn't matter anw).

5:55 we all know what those 2 were doing.

@TheSlickmicks

Жыл бұрын

Do those two look familiar?

@saulgoodman2018

Жыл бұрын

@@TheSlickmicks They had a "meeting", to "feel the difference".

I’m surprised they don’t include 2 USB-C ports on the front.

@jrstepos

Жыл бұрын

most motherboards even today only have one USB C port, so Im not surprised.

@philliploree9280

Жыл бұрын

It is disappointing for future use, but most mobos don’t have the ability to connect multiple front panel usb-c - i have a z690 maximus extreme and it only has 1 front panel usb-c connection - not sure how many z790 or x670e boards have 2

@coreycrossman3447

Жыл бұрын

Question, if cases have their usbs all over the place how do you place your motherboard so it matches the USB cutout it's it like a cord or something

@sabishiihito

Жыл бұрын

@@philliploree9280 The Z690 Maximus Extreme also has a Thunderbolt 4 front connector, though it's just a standard USB-C port and not a "header." Maybe there will be some way to convert that to a USB-C case connector soon.

@toxicturkeyy

Жыл бұрын

@@coreycrossman3447 That typically tends to be the case yes. The back io is standardized, but for the front io case manufacturers can really do whatever they want, then just run that off a few cables to the motherboard.

With the size of current cards, and who knows how bigger they will get, I'm personally happy for those alternative GPU mounts. That one on the front center looks amazing and will fit any card that is to come, I'm excited for my next upgrade.

WOW ABSOLUTELY BLOWN AWAY BY THE O11 VISION!! Will definitely be picking it up for myself when it comes out. That removeable motherboard is going to be super sweet and the aesthics are simply mind-blowing. LOVE IT!! ♥♥

It's been awesome watching Alex come into his own.

@edwardpark247

Жыл бұрын

"Thanks mom"

Unscripted Alex videos need a "pain the arse" count. lol

I love the can cooler built into the desk

After reading or watching reviews, I was deeply impressed by Lancool III. And yes, this new Lian Li is impressive, but I'm still not going to abandon my first love, Be Quiet, especially since their highest-end lineup has frontal mesh now. It simply matches my mindset of functionality over show-off better. Sadly, they're severely underrated. This video alone surpasses the combined views of Be Quiet reviews from Computex 2023.

pain in the arse

5:50 Trust me

@xaxscratchxax926

Жыл бұрын

Yeah, I liked that shot too. 👌.

I am interested in the SUP 01 and hope it performs well with an airflow setup.

Got the 205, great case for a build, love the look of these

Alright who gave Alex a little snoot of some booger sugar before the shoot? Dude is flyinggggggg through these.

heres my next case, another cooler master xb evo for those sweet sweet 5.25" bays along with hot swap bays that allow easy access to 3.5" drives (to allow easier backups.) along with a very good setup for having a variety of hardware... and a pain in the ass for cable management under the mb.

This was a very nice feature, thank you! 5:50

What a beautiful case, might as well just get it when it comes out.

Love my Lian Li 216 case. Really like the look of all the Lian Li cases, but the 216 checked off all the boxes for me, and I love all of features and quality Lian Li provides.

Wow I'm more of a function over fashion guy for PC cases but that case looks incredible and its really hard to deny how versatile and easy to build in it is with the removeable motherboard tray. Instead of reusing my old PC case when I hop to AM5 later this year I might actually end up getting one of these...

I was really struck by how awesome the RGB lighting stands out in the cases with tempered glass all the wayy around!

Love mine , looks beautiful and this new model looks dope.

My recent computer I built last year is Lian Li 011 Air Mini. Easiest computer I built and i used Lian Li Fans. I am a big Lian Li fan now and watching this kinda makes me wish I didnt recently upgrade my computer. That stuff looks sick.

Recently went all in on a Lian Li build. Their designs are great.

I saw a Lian Li and I totaly had to get it! i made my build with one, its my pride and joy lol

was hoping to see an 011 mini evo but overall not bad for a booth presentation

Wow. The O-11s were already good-looking cases. I was about to replace mine with the Mini version. Looks like I'll need to wait a little longer!

I've been on a Mac ever since I started my business over a decade ago. Recently, though, I've been wanting to build my very first PC. I can't believe how much of an art this is. I've been stuck in the KZread research phase for a while now. Kind of intimidating. Cool how this is actually a thing!

I do have one thing about the Odyssey X case (I know you didn't show it), that you cannot put a rear fan on the motherboard. In the rotated dynamic version, you only have bottom and the front for exhaust and intake. You would have make the bottom to be the exhaust, which is not good when most of your cooler air comes from. Another possible is to have all your fans being intake or vice versa to create a positive pressure.

The desk needs more places to mount monitor arms. Working from home, I have 2 27" portraits either side, and a (I think) 55" in the middle. Being able to mount those and have the legs be able to support it would be good. I am actually interested in buying it, the old desks were appealing but never fully suited my requirements.

That case with removable motherboard tray was a good idea. I hope somebody creates something similar without all the RGB and glass panels. I like black sleeper mesh cases but it seems to be hard to find such cases anywhere.

@renincuente3291

Жыл бұрын

Totally agree, the tray is really great, however, all these glasses... They look very nice but seems to me you''ll end breaking any of them sooner or later... I don't see me having a case with so much glass.

The heating function on that TEC cooler in the desk is perfect for my piping-hot Dr Pepper

Love the desk

Does the O11 Vision support vertical GPU with PCI riser? That thing looks AWESOME!

Wireless charging. Move the drink holder further back and to the side so I can push my keyboard far to the left. Cable management for my peripherals. Dust filter on the intake. Make the right-side bin deep enough for a controller (and maybe headset). Give yourself room at the back corners to attach aftermarket pedestals (winglets) for speakers. Play to the aftermarket/modding crowd with considerations for stream deck and DAQ placement. Had this as a reply to a previous comment, but figured it could stand alone on its own merit. NOW TAKE MY MONEY!

Yup... I see a copule new builds in my future. Love the tweaks to the original base design they are doing.

I want that cooled upholder! No spilling at its cold.

I was once looking for an esthetic look when building my pc on an early times but now, what configurations make the pc cooler (lower temp), it's my way. I put 2x 240mm radiators inside the case & 2x 360mm radiators outside for better cooler air.

Got a Corsair 4000d airflow and before I upgraded my secondhand pc to that I was eyeing Lian li cases as micro center has them for good prices.

how does the cable fit on a 4090 in the case with gpu in front? would the new msi mag psu with yellow connector help?

That's a beautiful case.

Have you guys ever thought about getting rotating stands to build computers on in the studio? I have a 360 degree rotating TV stand that I set up on my build table for hardware projects. I can toss my O11 Evo on there and spin it around with ease to pass cables through the case without having to lift or rotate it.

5:54 cameraman was trying to do his job

A very good video, thank you S.C

Very cool stuff

the drink cooler in that desk just gave me life.