This is going in the trash, I've found something better! Let's Roll Motorcycle Lift and Dolly
Автокөліктер мен көлік құралдары
Lifting my Harley-Davidson motorcycles off of the ground used to be terrifying! Washing the bike while it was on the lift, and watching the bike rock back in forth always made me feel like it was going to fall off the lift. Diy yourself oil changes, trying to remove the full dirty oil pan that was wedged in between my old lift always ended up with a mess. Finally, there is a solution.
Click here for today's great deal! letsroll.store/ref/16/
We appreciate your comments and encourage you to share your opinion. We take great pride in being a family-friendly KZread channel. All cursing, profanity, vulgar language, and abbreviations of such will be deleted. Thank you for your cooperation.
Have a blessed day.
Traveling Tall
Instagram: @RealTravelingTall
Пікірлер: 375
Great review as always. Thanks for the info. Think I would buy a table lift before I spent $700 on a jack.
@letsrollstore
Жыл бұрын
There is a dolly and a lift that you purchase for $629. Not just a scissor lift.
@allborosnyc4544
Жыл бұрын
@@letsrollstore $629 for a two piece set. Im trying to take up less garage space not more. Besides the Lets Roll jack doesnt raise that high off the ground.
@jbean530
Жыл бұрын
I guess if you have a Harley, you have a lot of m money for a dolly/lift combo kit. I need something more multi functional and less expensive.
Cool looking lift but I have to say I own a hydraulic moto jack similar to the one you showed first. I attach 2 ratchet straps and the bike never moves including while removing wheels etc. I can see the let's roll dolly being great for winter storage. Cheers.
I have a Harbor freight style lift and I don't get any wobble because I use a strap over the motor onto the lift and they both become one. Also screw down the levelers.
That lift and dolly are great! Great presentation too! Thanks, Tall!
While it is much more stable than my almost 20 year old Harbor Freight, it is also 4 1/2 times the price at current values. I paid less than $100 back then. I have never had an issue moving my Road King anywhere on the lift with and without settle bags, in the garage, on rough black top, and even in my enclosed trailer. Used it to remove wheels to install new tires. Sitting on the lock helps stabilize it better. If you have the bucks, thats a nice product. But if your like me, nothing wrong with the HF lift or the clones.
@revealingfacts4all
Жыл бұрын
yea, agree plus in the video he has the lift too far toward the rear of the bike. If he moved it up more over the engine, it wouldn't rock. I have a HF pittsburgh lift that I paid $125 for and while it's not the best it's far less expensive than the price tag of this over priced scissor jack and metal welded together.
$60 compared to $600 though.. let's not ignore than entirely.
@aubreydavis2739
Жыл бұрын
That’s definitely something that you get what you pay for
@thomascampbell3763
Жыл бұрын
A premium product will come with a premium price. This seems like such a better product.
@mikewalters4994
Жыл бұрын
Did you find a good touring seat for a tall man. I'm 6'4" and I'm also looking for a tall man touring seat. Thanks Tall Man!! Ride Safe !!!
@twowheelboomer
Жыл бұрын
@@aubreydavis2739 In life, I have found that to be a truism. But I have to OG Jack!
@Jim_Berry
Жыл бұрын
True, but think about the expense if your motorcycle falls off a cheap jack.
I looked hard at this dolly system. I saw someone comment in a video about this dolly that they liked the iron horse Dolly lift better. I looked at it pretty hard. There's not a lot of videos or reviews on it. It's a shame, because I took the chance and went with it because I loved the all-in-one design. The dolly and lift are one unit. The company even offers a veteran discount. I cannot comment on how well the Let's Roll Dolly system works. I can say that I absolutely love my iron horse Dolly lift. It goes under the bike very easily. I got the hand crank but you can spend a small amount extra to get it with a drill driver attachment. Honestly, the hand crank works perfectly fine and isn't very hard to crank and doesn't take very long to do its job. The bike is super stable when on the lift. So much so that I could easily climb up on it and sit on it while it's lifted up off the ground. The wheels are of good and strong quality. They roll in all directions. One wheel has the ability to be locked in two different positions to make pushing/steering easier. I have been using it primarily to lift my bike and push it into a spot in the garage so that I can still park my car. It works as well as he advertises in his videos. If you're in the market for a dolly lift for your bike, I highly recommend checking this one out. It is pricey just like the let's roll dolly, but it is high quality and I believe it's worth every penny. It has made parking my bike in the garage incredibly easier than it was.
For us old-timers I'm not getting down on the ground on my knees to do this. But I do really like it.
Looks like a nice product. Thanks for the insight. Happy cleaning!
Wow. Great presentation my friend. Grateful for some of you who ride so much, you find all the tricks of the Trade. I'm still at the sportster level, only bikes I've ever had, you could prolly lift my bike with one hand in the back LOL, your a beast DUDE! Anyways, I did my own back thread on a spark plug port on a 20 sporty iron 1200, actually impressed myself with the fix, but it's honestly from watching all of you and learn from.
The perfect solution! Been looking for a storage solution for our 2 bikes + 2 cars in my garage, If I could stand them more upright and roll them safely, game changer! Love this lift, thanks for sharing! (Side note) those crappy lifts are so loud when just rolling them around, never liked them.
Nice lift, definitely better than the traditional small lift, but unless you do a lot of your own maintenance the $650 price tag is really a lot for us poor folks.
Just a suggestion, when its on the dolly run some tie downs from handlebars to outside corners of dolly, keep it from getting falling while working on bike
I have the lift that was alleged to be “unstable” I have changed finders, baggers and taken off multiple items and never had those issues. The swaying depends on what side you put it on -in my opinion . I will get a full lift for $ 700.00 score I buy a jack -up
Cal Products was the original lift for Harley's, every one made cheaper versions, It lifted it much higher and they offered a dolly that was also much higher and very strong. The issue I have with the lift your reviewing is it uses a screw jack mechanism. Just like a service jack it uses a radial bearing and threaded rod. Both will out quickly. So in time you will find out.
Let's Roll is a great product but that jack you supposedly threw away is very good and gets the job done. I guess content was needed and here we are. 🤣
Got one three years ago, best thing I've found for cleaning and storing
That’s outstanding, thanks Tall!
Absolutely love the wheels on your bike, beautiful
I have a lift like the first one he used. I run a rachet strap from of the lift to the other side between the engine and transmission and snuged it down. It held a 94 Harley Davidson road king with no problem.
I've had one of the usual lifts decompress over night. I had used a 4" block of wood under the rear tyre to stabilise the front end. In the morning, I found my 2010 Triumph R3 lying fully on its side, wheels up in the air ! When the bike decompressed the block of wood I had mistakenly left under the rear tyre, pushed the bike over. 🙁🇦🇺. Lesson learnt the hard way I won't trust hydraulics any more, I sit a block of wood under the jack so it can't come down
Nice, look like it’s a keeper !!
I have on too and love it. Just saw a hack for it where you put the wheels that rotate kitty corner you’re able to move the bike around even better.
Got mine several months ago love it easy to use and store
Nice product. Especially for tight quarters and old backs.
thanks for the review buddy that thing is awesome
Great video I learn so much from you thank you tall you are the man! Watching from California!!
$600.00 is a lot of money for a lift. Part of the perks of having them as a sponsor and getting one for free I suppose.
@fritzk9118
Жыл бұрын
You could prob build it yourself for roughly $100 if you have a welder.
@jeremymann8930
Жыл бұрын
But also cheaper than dropping the bike
Impressive and peace of mind. Really it’s a mobile work station. Definitely worth getting one if you’re going to own a large bike like that.
Dang. That price is half the cost of a full lift table. Lift table or little jack with wheels hmmmm. Lift table!!!
The harbor freight jack goes higher and is much cheaper....and it is hydraulic. 10 bucks for some straps to make it more secure. I would give great review if I got the product for free too though.
Being able to spin it 180° with ease is a win 👍🇦🇺
Stuck home with COVID and discovered your channel/been binge watching. Very much enjoying
Tahnks for the Video Tall. Really like that Road King, looking sweet.
Hey Tall. I have the same jack from Harbor Freight. The way to stabilize it is to take it up and lower it to the locking point. This will eliminate that wobble. I wash mine all the way up on the last safety catch and its rock solid.
@ozzynmyrtle
Жыл бұрын
my craftsman jack is the same way. I was going to comment but you beat me to it
@jordanlynch9689
Жыл бұрын
it also helps to use ratchet straps in the 4 anchor points on the harbor freight jack
@Steve-qn8gn
Жыл бұрын
That’s why the whole comparison is biased from the start.
Nice lift. Really beats the inexpensive one I have from HF.
I’ll be building one real soon got the wheels from Jeff just today the iron is at work great job but $600 bucks for this dolly is a bit much
Wow that’s a great tool but for $630 NO
The dog looks good and healthy!
Love the stability of that lift for sure. And made in the USA
thanks for the video. i am looking for a dolly/lift for my bike. keep up the great work
Let's Roll. ! . Great job
Thanks brother man always in detail ride safe.🍻
I’m getting one of those thanks so much. I’m 6’7 and follow you for all advice
Thanks Tall for the info keep the content coming
My dream bike 🏍 😍, Stay safe brother, God bless!
Well said, good demonstration.
Thats a good life and dolly. I use the J&S lift and is much more stable when properly applied. Will need to upgrade to the new 12K bottle jack though. The older one was a bust
The best part is the available open space under the bike. No jack blocking access. If I were actually working on the bike I would still have ratchet straps for safety, however there doesn't appear to be any hooks on the dolly for that purpose. Pretty darn expensive, too!
This would be great for storing my bike in the winter!
And then… Tall sold out the Lets Roll lifts
That package plus the adapter for my Indian puts me at $700. I have the new Harbor Freight 1500 lb lift plus an adapter for my Springfield for $300. The lift is very stable with safety latches built in. If I'm feeling insecure I use a couple of tiedowns, but it's not really necessary. While it's not a dolly, I could easily convert it to casters if I wanted. This Let's Roll looks good, but man, some of these prices seems just a bit out of touch.
Nice job Tall!!
Thanks, that’s a great piece of equipment
Nice review I like the Lets Roll dolly but I prefer the J&S Dolly because its a one step process and can be lifted at various heights to make working on it easy at any level. The J&S is super sturdy.
That is impressive.
What an incredible jack and dolly I gotta get me one. Pau; Tall, thank you for this Video!! I've been watching you for weeks now, yes subscribed and your channel is Fantastic brother.
$650 is a lot but it doesn’t seem like a bad move at all if you like or want to start investing into yourself and love USA and quality
Wow. Sold! Better sell my 3 other wobbly crappy lifts b4 everyone sees this vid… Thanks Tall!
I was looking for a stable lift for my new 2023 Road Glide. Just put in my order with Let’s Roll. Thanks for the video.
That's a needed tool bro great video 🤟💫🚀🚀👊🔥🤘love from Miami FL USA 🇺🇸👌
Great presentation
Nice bikes👍. Time to go for a ride!!!
Beautiful bikes!
Cool concept
Great video. I need one of those
great video Tall and imma have to have one of those for my Ultra Limited ....WOW thats nice ....wht will i do with my other two floor jack models ? LOL....thanks again
great product.... give us a big discount code... LOL... 625 for the package is not cheap, but with that kind of stability, I don't know of anything else that is as secure. Thanks for sharing
Hey man I haven’t seen much from you on UTube lately glad to see you back
That is really cool
I hear you but ain’t nothing wrong with the other lift. Just make sure it’s set on one of the stops. I leave mine up on the stand for days at a time. I had a stretched bag street glide with a 30” wheel up on one of those Harbor Freight lifts all winter.
Excellent. Gotta get one. 👍
Nice Bikes. Good Presentation.
Great vid man
That's so cool, I wish they made one for my 95 flhtcu with sidecar. Lol, can't find any lift for it.
Yo Tall, Awesome presentation! Awesome product! And as usual, you did an awesome job! You should get a commission because you sold me. I’m buying one.
Brother, This is NO JOKE!! crazy!!!
I have a Scissor lift with a ratchet from EBay I use for raising the front of ground and Harbor Freight pump Jack to raise my new Goldwing TOUR. Works like magic. The best 110.00 ever paid. I rest it on with bracket, top notches and done. No leaks, no weight problem. Very cheap. Done deal
I think you sold me with the advantages of changing the fluids with that lift. Traveling Tall, will I see you at the New Jersey Motorports Complex for the King of The Baggers Race? I rode the Harley to Brainerd, MN and it was a blast!!! Go Travis Wyman #10
Bro, I have to have one! I need to stop using that cheap jack from Harbor Freight. Gonna use the link, this is a must.
@rickyhawkins7407
Жыл бұрын
That’s two of us. Always had the same issue on my lift. Have to get one of these. Awesome presentation.
Nice video. But the wrench thing is a pain
Yeah I'll hide all the same problems as you when I was cleaning my bike with the same Lyft I do appreciate the review.
Thanks bro ✌🏿
Awesome lift and dolly, works great, definitely make cleaning your bike much easier and safer. Probably close to the 1,100 lbs. limit when you sat on the bike🤔 Great video, Thanks😎
@johnstrickland4090
Жыл бұрын
Nice
@ayedee6681
Жыл бұрын
1100 pounds for the lift, the dolly can hold 1200 pounds rated.
Hello, great video. Looks great and useful. I would like to ask what seat you are rocking. I have a 2002 RG Special and I am 6'2. I am looking for an extended seat and was wondering what yours is? Thanks Manny
Good stuff, thanks bro. Was ur bike a 107 before the 124 kit??
I'll take the one your tossing 🤣
Commenting for the algorithm. Love the content!
Looks like a good product
I have no reason or need to spin my bike 180°. As for the ATV lift that most of us use, I put jack stands under the saddle bag crash bars and lower to put some weight on them. The bike is then stable enough to sit on and shake vigorously. Also, I change the crank case and transmission oil on the Jiffy stand so the ATV lift is not used.
awesome video
Looks great, and you can work on the bike too!👍
Hey man, and if that was a couple hundred bucks, I'd be all over it. Oh BTW, your bike looks great!! Have a great Summer!!!
Great presentation and great channel. My concern is it really doesn't get the bike high enough off the ground. It appears as though the front wheel is only an inch or two off the concrete. I have an old lift that I bought from Harley Davidson that raises the bike 18" off the ground. Will the lift part of the Let's Roll lift the bike higher?
Beautiful bikes bud
You ain't lieing Big Dawg. I get scared every time I wash my White Sand Pearl Street Glide using that Jack.
My harbor freight jack is unstable as well, even when the bike is strapped. I'll add this to my Wishlist. Didn't see my bike on there so I emailed them for compatibility. 2018 Yamaha Bolt R-Spec. I do my own tire changed after my local shop charged $221 for labor alone for one wheel.
Nice Bike! 😎⚡️🤙
👌 way more stable … time for upgrade
I am in the market for searching a storage dolly on my HD Fatboy. This will work for me especially because my garage is limited in space. With this low profile dolly I can maneuver my Fatboy perfectly into exact spot. Not only for storage, but perfect to wash my Fatboy at ease. I know this dolly is not for everyone, but it's a win win situation for me.