Nice video! Make sure to remove the battery whenever changing any blade though sir.

The multipurpose blade DeWalt gives can be used for metal. I cut 0.05” stainless with it. Cuts like butter. Just remember to remove the plastic extractor hood before cutting metal. Make SURE any blade you buy is rated over 20,000 rpm. There are a lot of 3” blades rated at 10,500 or so. Don’t use those. They may explode!

Angle grinders and reciprocating saws have been our bestfriends, I need this in my tool list.

I remember suggesting the blade and thanks for this follow up. I think I might finally pick up this combo.

Just bought mine today. I just love the compactness and yet very powerful brushless motor. I have dewalt brand tools so this will be another great addition to all my other dewalt power tools.

All right people, check this out. I work all day with tools in my hand and this tool was a game changer for me. I was using the DeWALT 20V and corded angle grinders for years cutting different things but when Ryobi came out with this tool first, I bought one and it worked great but the best thing was it was LIGHTWEIGHT. As soon as this one came available from DeWALT I ordered one and tossed the Ryobi in the corner. This thing makes working all day cutting tile a breeze...and yes, as soon as that vac came out I got it as well. I actually keep both tools in the carry bag the vacuum comes in.

@fartpooboxohyeah8611

Жыл бұрын

Been using the Ridgid version every day for the past year. That and my Kobalt sliding tray table top wet saw and manual cutters and I hardly even use my full size wet saw anymore.

@napolitanotile2919

Жыл бұрын

YOU BOUGHT RYOBI BA HA HA HA LOL 😆 🤣 THATS HILARIOUS 😂 😃 😄 😁 🤣 BA H HA

@brianreinhardt4050

Жыл бұрын

@@napolitanotile2919 I bought it because Ryobi had the tool out a year before DeWALT did...It was a cheap way to evaluate if I wanted the tool or not. It WORKED though...lol

@jonno-cr8lv

Жыл бұрын

What's so good against a grinder

@joshuadrummer3234

Жыл бұрын

@@jonno-cr8lv The comfortable and more stable grip

I MUST have this tool!

Gonna be my next buy. Great video

Where can I find that clear plastic square that you are using?

@itsonlyafl3shwound

7 ай бұрын

Wow no.reply? Whats the name of it?

@Watsonclipsfordays

4 ай бұрын

It’s called a speed square

@Watsonclipsfordays

4 ай бұрын

@@itsonlyafl3shwoundhunt tool company

@dope4500

2 ай бұрын

It's so useful.

The REAL QUESTION, that plexiglass!!! Where can I get one of those!!!? That’s more of a game changer 🎉🎉🎉

Suuuper deluxe content. Nobody does it better!

@LandbergTileTV

Жыл бұрын

Glad you think so!

mini circular saw in alot of ways. i have a kobalt cutoff tool w the 4in wheel and i love that thing, but this is great too for detail work.

Been using the Ridgid version for the past year. I no longer use my grinder, and hardly use my wet saw anymore.

I have one (not dewalt tho), I love it, use it all the time.

So to me the most important thing is how rough or smooth is a straight rip. It would be great to see this done with an in depth view of the edge it leaves behind on different material.

@LandbergTileTV

Жыл бұрын

Good idea, will do!

I'll have it by this weekend 😉 I'm tool spoiled!!!!

I love this tool, what would seem like to take forever cutting the wire shelves it takes me seconds to do all the shelves I need to cut, love it

@emmettturner9452

Ай бұрын

It works great for wire shelves. I used it for cutting mine in half so I could stack the washer and dryer where the wire shelf used to be and I used it to clean up wire shelf cuts in the store next to my workshop after my elderly mother cut herself badly in their drink cooler (like, the kind of injury some would sue over). It made quick work of both. I love that the size and control let you bevel edges to avoid leaving sharp cuts.

I was wondering about these little guys, if they were any good for tile. Thanks for the Video

I have the milwaukee version and they are awesome, total life saver for cutting new electrical outlets in existing tile and even plaster. I would have been trying to cut those with an abrasive multitool blade. Fyi for the M12 version, get the bigger batteries

@AlejandroHernandez-rh7lm

Жыл бұрын

Poo o¹1

@Hengry-hn7rb

Жыл бұрын

U mean the 6.o ?

@FixthisCD

Жыл бұрын

@@Hengry-hn7rb 3, 4, 6. Anything is better, more run time and power

Excellent review 👏 👌 👍

@LandbergTileTV

Жыл бұрын

thanks 👊👊👊

I kinda like a small pump bottle with water, pressurize bottle set it so a thin jet comes off and use that to cool the blades, or get some 1/8" inch ice maker line, and hose connector, with shut off. is the other way like to cool blades.

That thing is awesome

I know you use DEWALT and I appreciate the battery consistency However, have you seen this tool by Makita that has a water (wet cut ) system? Wish Montolit made a Diamond gold blade in this size. The DEWALT setup is a great one. The size of these tools makes all the difference-game changer. Thanks for all your excellent reviews

This saw kzread.infoUgkx84IcU5pbZd1Qrz8u4-YRLmJax7kdRi7B comes in handy in many ways. When I had a small (dead) tree fall I started the process of disposal by using this saw and cutting off the small branches. Then slowly work on the small trunk with undercutting and letting it fall down. With many trees on acres of land paying for a tree service can be expensive. It also is nice in that it can be used in hard to get areas like along my creek. It's also safer and quieter than a chainsaw. It obviously can't cut down massive trees but it does work fine for small ones or brush. And of course since I already own a Black

that's interesting. But is this tool suitable to make perfect stright cuts in the wood ? What is the maximum wood thikness it can cut?

Can you cut a 2x4? Any good for wood? What blade for wood you recommend?

Does it work well on small pieces of wood such as pencil trim etc?

I’m on the fence about buying this or the Dewalt angle grinder. I need to cut a large disc padlock off my storage unit. But I want to also have a small enough tool to cut kitchen tile I want to install. What do you think is my best bet?

Just recently brought the worx chopper and it keeps on shutting off while cutting thin aluminum. This seems like the tool I should have gotten.

I need to cut a short drainage groove (20 in long and 3/8 in deep) in my concrete garage floor. Would the DeWalt do it with the Diablo blade ?

I need to know which adapter to use to connect to vacuum

Excellent Tool!!! Does anyone know if there is a Makita equivalent?

I'd like to know where you get that template from.

Have Milwaukee version with Diablo blade. Very cool size saw.

What's the name of that stencil tool u have??? That things pretty sweet..btw that cutoff tool was one of my first dewalts I ever bought and I luv that thing..it's def one of my all time favorite tools that I'm never getting rid of

I have bought my Dewalt cutt off tool and watched your video. I like it so much. I will use this tool for my bathroom project. Where did you get the acrylic triangle ruler with all the cut-out templates for rectangle and circular shapes?

@LandbergTileTV

9 ай бұрын

The company is out of business

Looks like you were cutting in the opposite direction of the arrows on the wheel...I don't know if that matters much. Also have you noticed that the Forward & Reverse markings on the tool are wrong?

What's the link for the dust collection adapter

What is the template you’re using?

This would work better than a grinder I used yesterday to cut the plaster wall.

Awesome little tool! I scored one at HD with two DeWalt XR batteries (4 & 6 AH) and a charger plus carrying bag all for $199 at the HD Black Friday sale (or pre-sale, as it is).

@nguyenpham-uh1qu

Жыл бұрын

do you mean tool and baterries all for 199?

@davidyoung1610

Жыл бұрын

@@nguyenpham-uh1qu Yes! I keep getting my comments deleted when I tried to give details but just go to the HD site and it’ll be there.

@nguyenpham-uh1qu

Жыл бұрын

@@davidyoung1610 thanks David

@4142Wilb

Жыл бұрын

Mine arrives tomorrow 👍🏽

@billymacktexasdetective5827

Жыл бұрын

It's not on home depots site... They only have the bare tool for $129 or the tool with 3 wheels for $179.

Can this be set up with a guide to cut 0.045mm aluminum?

Where can I buy that Clear Square that makes circles ?

Love the tool but What is that square call!ed! I seen your video and think it’s a awesome tool

Hey, brother. What was your square? Transparent one? I really loved that. I always admires your work and follows some of your styles.

@LandbergTileTV

Жыл бұрын

Hunt Tool Company

I need to know where you got that speed square

Curious what square that is 🤔

Is useles only good for thin material bleed can’t cut Thick material . Good for crafts like cuting paper cuting aluminum sheet

Will this cut electric stove top glass?

please tell me tht hw to purchase it 3 inch disc..???

Can I use this to cut into a concrete slab?

How is on removing grout?

Dewalt sales about to go up!!!!

@LandbergTileTV

Жыл бұрын

very cool little cutter, but won't replace a grinder! Tile on brother 👊

Man where can I get one of those speed squares. Liking the tool. Loving the square

@mrgreenbud4200

Жыл бұрын

That's what I wanna know too 😂

with the extractor, how would this work in a tile shower demo? usually when demoing existing shower walls over drywall/ durock, i either use a hammer ( actually not a regular hammer but a masons hammer and use the chisel side) and just bang channels thru tile and board along the sides of studs every few feet squared to remove tile and board from wall or i use and angle grinder with a wet sponge to make cuts in wall also every few feet square to remove tile and board. is this too much work for this little cutter? will it cut an inch in depth? and about how many linear foot would it cut before the extractor would need to be cleaned? thanks

@LandbergTileTV

Жыл бұрын

This with the vac will definitely keep dust down cutting indoors.

I have the m12 version of this tool, & was very disappointed until I got the 6.0 batteries. It's alot better now but I've still heard the dewalt is way better for this tool. Makes sense being dewalt is 20v vs the milwaukee is 12v

@jackflackatari

Жыл бұрын

Cool story bro

@evictioncarpentry2628

9 ай бұрын

Dewalt is 18v like every other tool but yes it's better then the M12.

Why one of these over a compact circular saw or angle grinder or oscillating tool?

Parkside's 12V 76 mm is powerfull as well, for a DIYers :)

Nice video ! Can you do a review of the dewalt vacuum ?

@LandbergTileTV

Жыл бұрын

This is their newest vac kzread.info/dash/bejne/pYhqy8ayktnKpNo.html

I scored mine from Home Depot $199 tool x 2 batteries & accessory mount - go get yours now!!!

@tracer1127

Жыл бұрын

Christ tools are far cheaper in the US compared to the UK. I have just purchased the same tool having watched this and it cost me £320 with the batteries etc, some shops wanted almost £400 that’s a lot more than $199. Looks like a great tool though and will come in handy with my kitchen installation’s.

Those cutting disc look like Game Cube game Disc lol

@Big_Old_Bondy

Жыл бұрын

Haaa yess

Can you use a circular saw blade for timber? Thanks

@LandbergTileTV

3 ай бұрын

Unfortunately no

What house did you use to connect the two tools ? I got both the same tools but my flex hose doesn't connect to the cut off tool. Please help

@LandbergTileTV

4 ай бұрын

electric tape, i don't think dewalt has an attachment yet

Where do you get the template

Watching Landberg is like watching normal videos on x1.25 speed

Love the DCS438. I would’ve bought that vac already if it were brushless like the Ryobi… or Dyson for that matter. What gives, DeWALT?!

Whats is ur square tools ?! i love lt

i like dewalt tools ,it is more than we expect , but where we get it . in Ethiopia

Thank you for this. I'm looking at getting one and I trust your reviews. Might you have a link for that Diablo diamond blade?

@davidbrown3602

Жыл бұрын

home depot

@LandbergTileTV

Жыл бұрын

I don't have a link to the blade, search it up 3" Diablo Diamond Blade

@ryangehrke8019

Жыл бұрын

@@davidbrown3602 not there that I could find

How do you connect the Vac with the Cut-Off tool? Which Air-Lock Adapter?

@LandbergTileTV

Жыл бұрын

electric tape

How did you configure the hand vac hose so you could connect it to the cut off tool? The vac does not come with the correct connector on its hose.

@LandbergTileTV

Жыл бұрын

electrical tape for this vid

Based on your recommendation, I purchased the Dewalt Hepa Handheld Vac to use for dust collection, but it does not fit into the dust collection port on the cut off tool because it is too long and tapered. It looks like you may have cut off part of the nozzle on the handheld vac hose. Did you modify the hose to fit the cut off tool extraction port?

@jamesandrew2012

4 ай бұрын

I am having the same issue with the hose connection... did you by chance find a different way to connect the two tools ? I have the same tools as you and the same issue...lol

@user-uf6hg6qu1q

4 ай бұрын

I found a solution online. It's not a great solution, but it does work. If you remove the bristles from the round brush that comes with the vacuum (they are attached to a ring that just pulls or twists out), the remaining body of the brush just fits on the dust port of the cut off tool. Not the most secure attachment, but it does work.

@jamesandrew2012

4 ай бұрын

That sounds ok , but i called Dewalt about this and the house on our handheld vac isn't designed for this but he showed me another hose to buy with that adapter. Please see item numbers DWV9000 - 1 adapter 5140128-68 - 1 hose

@jamesandrew2012

4 ай бұрын

Stupid phone i mean hose not house...🤣

@jamesandrew2012

4 ай бұрын

The hose we have on the handheld the fitting won't screw off but this other hose im telling you about will allow you to remove the factory fitting and apply the dcv9000 adapter then you will be able to connect to the airlock fitting on the dust shroud... 🙌

A Football Life. Jim McMahon destroying tile with the Dewalt 3in cutoff tool + Diablo blade.

@LandbergTileTV

26 күн бұрын

lol

Can't find a 3" mesh tile blade from Diablo anywhere? Where did you get yours?

@LandbergTileTV

Жыл бұрын

many tool companies sell these, google 3" diablo diamond blade

We run a pair of the M12 ones, one loaded with metal disks and swap it to a multi blade for doing durok valves and holes, and the other loaded with a diamond blade for tile work. Where did you find that stencil at? I've been making cutout templates whenever I run into different size flanges and valves but that would be super handy.

@jpbiscaro8694

Жыл бұрын

Second that on the stencil it looks handy!

@paulkanneman44

Жыл бұрын

yes where

@theduckrc211v4

Жыл бұрын

Same here , Where ?

@LandbergTileTV

Жыл бұрын

That clean square is by Hunt Tool Company 👊👊👊

@rotatingrecords

Жыл бұрын

@@LandbergTileTV Thanks a bunch!

Take the battery out when throwing it around in your hands like that!!! Your giving me butterflies😅

Great review - thanks. Just bought mine and used it for the first time. Used it to remove some cracked mortar between bricks. This resulted in the tool being covered in dust (didn't use dust cover or vacuum). Will the dust harm the tool?

@bongandablitze

8 ай бұрын

How did you get on with raking out the joints with it? Seems a bit over kill

Could make a tile track saw based on this.

@aaronoconnor606

Жыл бұрын

Totally could make it run on a track.

@davidyoung1610

Жыл бұрын

It’d take a bit of work. The hinge pin as well as a bit of the front part of the shoe protrude just a tiny amount so you won’t get an edge exactly parallel to the blade. I’d love to get these issues fixed so I can run a woodworking blade on this and use with straightedges, etc. This can be quite a versatile little saw.

@Big_Old_Bondy

Жыл бұрын

Sigma and Montolit do a tile track saw range that you attach a grinder to. Also comes with a scorer wheel for the track.

where did you get that square with marks for holes and squares?

@LandbergTileTV

Жыл бұрын

Hunt Tool Company

how does it work if you 're left - handed ?

Yes but does it cut glass

Does anyone know if the guard can be removed? I'm hoping to use this as a smaller jam saw but that would need to be similar to a grinder. Let me know!!

@LandbergTileTV

Жыл бұрын

yes it can

It would be awesome if you could post link of the blade. I’m in the USA and I tried searching in Home Depot and Amazon. Seems nobody had the 3” diablo diamond blade.

@LandbergTileTV

Жыл бұрын

Specialty online tool stores have them. Home Depot may restock soon. Google diablo 3" diamond

where can i buy the clear plastic square that you have in the video

@LandbergTileTV

2 ай бұрын

The company will have a website up soon. I have a new version of the clear square soon

great video..i have this tool.. haven’t used it yet..i need to make some cuts on hardie backer board in the shower.. can this be used?

@LandbergTileTV

6 ай бұрын

You may want to use a grinder for hardie backer, or use foam board, Go board or Kerdi board

@dangallagher6975

6 ай бұрын

i don’t have a grinder..i have a 4 1/2 inch cement board circular saw blade coming tomorrow along with a scoring tool. trying to find the best option

Is there a blade that can be used to cut wood? Or would that be the DCS571 tool?

@LandbergTileTV

3 ай бұрын

Not for this unit

Dónde consigo una así

Excuse me, what is the name of the square you use to make the circles?

@LandbergTileTV

Жыл бұрын

Hunt Tool company

You know what this tool looks like? Like they took the design and build of the old Milwaukee 3 inch cut off tool model 2522-20 then just adjusted it to work on the 20v battery system. Reminds me of how Hyundai just copies Honda and Toyota

Can i use for glass tile

@LandbergTileTV

Жыл бұрын

Nope, glass cutting with a diamond blade needs water.

Where could I get that speed square from??

@LandbergTileTV

Жыл бұрын

hunts tool company

What advantage does this tool have over just using a grinder?

@dekurvajo

Жыл бұрын

They say its about the weight. However i dont find my 1100W 4 1/2" corded grinder heavy at all. What i reslly found interesting and i am seriously thinking about it its the Worx Maker X angle grinder which is really really small. Yet i am worry about its capacity even with delicate situations. But man.. That is really tiny!

@simonstones1918

Жыл бұрын

@@dekurvajo I’m off to have a look 🤠

That’s adorable 😂

@LandbergTileTV

Жыл бұрын

lol

What's the best blade to cut metal?

@LandbergTileTV

Жыл бұрын

Diablo metal cut off wheel

Bladesize - 75mm / 3" inch blade :)

Can you cut the concrete floor with dcs438b?

@LandbergTileTV

Жыл бұрын

no

@hobbyholic_LoveLive

Жыл бұрын

@@LandbergTileTV thank you.

i need 3 nd 2 inch porcelain cutting disc blade

I have that tool, it's very hard to see the blade, as your cutting along your cut line, with the dust cover, the only benefit is the small blade...

Sir, is it useable for wood too?

@LandbergTileTV

Жыл бұрын

Negative

do you have blades for cutting wood sheet rock

@LandbergTileTV

Жыл бұрын

negative