Download Circuit Diagram PCB Layout and Code, Link is in video Description

@nileshshah2060

Жыл бұрын

Code please

@CreativeTechos

Жыл бұрын

Updated, code is now available in same link

@arthureschner9319

Жыл бұрын

@@CreativeTechos Code is still not there

@David_11111

Жыл бұрын

@@arthureschner9319 nope i do not see , pointless without code :(

@David_11111

Жыл бұрын

code is now there to download :)

That is amazing. So simple but so powerful

I just love projects like this, and thank you for providing & your very kind to give such details for free.

@CreativeTechos

Жыл бұрын

Thanks for watching my friend 🙂

@utintlwin8773

3 ай бұрын

Thank you

Job well done Sir. This is something that was needed to be done on KZread.

Thanku sir to share knowledge regarding to this project it's very help full during work with electronics components .very very thank you

Hey i built quite a few of your Creative ideas . Very useful and cool Thanks . could not make the oled oscilloscpe work , code was too large for my Atmega328 to run .Great stuff keep up the good work!!!

Very nice project for people starting electronics and using on dubious values on dodgy looking components.

I purchased a similar device online, these things are good 👍

@mega62518

Жыл бұрын

Hi ! Can you send the purchased product link to buy ? Hope you will consider.

@galileo_rs

Жыл бұрын

@@mega62518 Just search for "Transistor Tester" tons of them available. Read the original project guide if you want to overclock the micro an improve the accuracy by using better voltage references.

@windshield11

Жыл бұрын

@@mega62518 just search for 328 tester there are a billion versions of this

I would first like to undertand how it work (than how to clone it) Thanks, goooood job

Great video. Thanks!

Great idea, exceptionally well explained, and useful project! Thank You!

@CreativeTechos

8 ай бұрын

Glad it was helpful!

You are very generous, and showing your creativity, very nice project, thanks

@CreativeTechos

Жыл бұрын

Thank you! Cheers!

So cool! Thank you

Brilliant project! Did you add inductors?

Excellent, congratulation.

Very usefull project thanks a lot! maybe a 3d printed shell housing!

@CreativeTechos

Жыл бұрын

Yes, i will print 3d casing for next version with zif Socket base

@Evilslayer73

Жыл бұрын

@@CreativeTechos cool!!!!!

Thanks for the help god bless you 🌹🙏🌹

@CreativeTechos

Жыл бұрын

Thanks for watching my friend 🙂

I REALLY need to test components and i use the same board shape. I have board failures and want to test the parts. With the clips Can i use this to test parts sitting in a unpowered circuit??? Or need to pull them out to test. Can you test TIP chips? Great share thank you. Can we get the parts in lot from your source?? Dennis

Good Stuff! Thumbs up.

great work💯

How much was the total including components?

Great, thanks 👍

seems very very useful

Grat job sir 🎉🎉❤

Thanks for the nice project. Why is the unit of resistance is È and not ohm?

whats accuracy and reliability like for testing capacitor esr?

Thanks alot for your effort in presenting this here! I was looking for a simple project like this, for a long time, after I destroyed a chinese one with a charged capacitor! Would be interesting to modify the code to program a pin ON/OFF during the test so it could actually SHORT CIRCUIT the three input terminals BEFORE the actual test starts. This way, you can be sure that if a capacitor is applied at the test terminals, it will be shorten, so discharged, right before the measurement take place, so it can be done without any risk demaging the Nano! Another question: are you sure it can detect most types of TRIACS as well SCR? I bought something similar in china but not all TRIAC's where correctly detected. Not talking about SCR's . Anyway thanks A LOT !!!!🙂🙂😉

@Patrik6920

Жыл бұрын

erm...shorten a capacitor in most cases destroys it or causes damage to it, a larger one prob fry the circuitboard also... a Mosfet usually needs to be shortend or have a draining resistor before it can be measured correctly...maby thats why those cheap once didnt work... fairly sure u dont have to for any known triac... but technically it can have an added capacitor to prevent it from being triggered from high freq noise...

@CreativeTechos

Жыл бұрын

Thanks for watching my friend 🙂

@utpalhalder2468

11 ай бұрын

​@@CreativeTechossir mujhe ek code cheye please help me sir

I will try this soon.

Nice, good job 👍🙏..

@CreativeTechos

Жыл бұрын

Thanks for watching my friend 🙂

@dvnoytekvlog6634

Жыл бұрын

Welcome always, God Bless 🙏👍

Nice video, thanks :)

compact ver. needed. in the case of office marker, for example. with liion! --------------- in circuit esr testing?

I very much admire this project as well as the link to get PCBs created at a very good price. I looked for the code in the shared Google Drive folder via the link but I could not find the code. Would you send me a link to the code? Thanks again for work of making and sharing this video.

I have to make it 😮 its an amazing device 🤔i haven't seen inductor test

@CreativeTechos

8 ай бұрын

It works, with inductor too

Thank you very much very good project sir but i have a problem i can't find this types of screen, sir i have request you to change the screen with liquid crystall 16x2 , it's easy to find.

can I use tft lcd display and anduino mega in this project?

I don't have 680ohm resistance. How much Ohm's registance should I use instead of 680ohm Registance?

Thank you very much for this useful project

@CreativeTechos

Жыл бұрын

My pleasure 🙂 Thanks for watching 👍

This is really nice tool

@CreativeTechos

Жыл бұрын

Thanks for watching 👍

Do you have some links for the hardware needed?

This is good stuff

Thanks for this...but what kind of archives contains the arduino's code?...i've download the link...i'm not an expert in arduino programming...a little bit of help Will be appreciated.

Nice ❤️

Nice project & thank you very much ❤❤

@CreativeTechos

Жыл бұрын

Thanks for watching my friend 🙂

Please tell me, what program did you draw the diagram with?

Can you provide a list of the components required. I think I have them all but it would be nice to gather them while the PCB is being produced.

@martinkuliza

Жыл бұрын

You should first have a look at the schematic since it details all the components required for the build also watch the video

It would be nice if it 1) tested Commodore 64 RAM chips. 2) told you value of inductors.

Can it test smd components . Like smd capacitors? Please let is know it will ve very helpful

Can it check quartzs?

thanks

Super super good job

@CreativeTechos

10 ай бұрын

Thank you! Cheers!

Nice work is this good for inducter testing

@CreativeTechos

Жыл бұрын

Yes, actually i forgot to show in video but, it works for inductors testing also

Hello Dear Friend, Is that possible to measure Idss and Vbr value of Jfet Transistörs?

Why i connect to lcd1602 but can't display. Please help me. Thanks you

I will use the link from the description of your video to register on JLCB. If I understand correctly you promise a $54 bonus if I do it. If that is true, thank you in advance. The video is great. I will make this test device based on your data. If you can tell me if I can also offer certain bonuses on JLCB if I insert their ads in my video?

Should make and sell complete some people can't build it because of lack of skills LoL.🤔👍✌️🛠️💯

Wow your code is just fantastic complied and uploaded FIRST TIME did not have to do any work on it I will be using your PCB as well - again great job and thanks

@CreativeTechos

Жыл бұрын

Glad it helped

These have been around for years, the difference here being different components and form factor. The old ones have a better way to hold onto the component.

Can a oled display change to lcd 1602 i2c?

You miss to test some compound like zener indactor inductor can you test it again please

i try to do this but if push botton for reset but Not working , please your support

где взять библиотеки? в поиске программы нет таких библиотек, а без них он не работает. Кто-нибудь отправьте ссылку на все библиотеки для этой программы

Can you also test op amps?

Can i measure smd capacitor with this device?

pro i have the same LCD Oled 0.96 but pin out Are (GND..VDD..SCL..SDA))and LCD IN Video PINOUT (GND..VDD..SCK..SDA)) the difference IS SCL $SCK >>> I Need To know the screen with pinout (GND..VDD..SCL..SDA) will work fine with out any problem

@CreativeTechos

Жыл бұрын

SCL & SCK are same pins called serial clock pins, while SDA is data pin

@ahmedsalaheldinmohamed2889

Жыл бұрын

Thanks

Can you add a Graphic compound icon to code?

how to use it on esp8266 without lcd?

Thanh you .pcp and code

Pro how we can make font on lcd bigger

Thank you. what's the display we have to use?

@CreativeTechos

Жыл бұрын

In video i used oled 0.96 inch, You can also use I2C 1602 (16×2)LCD also Nokia 5110 with I2C interface.

@DilnuwanAmaraweera

Жыл бұрын

@@CreativeTechos@ Creative Techos Nokia is best. Thanks again.

Parts list Like BOM, Source, or write them down from the video?? Display Part number, Chip PArt and source? Why the Nano versus the Chip???? Pros and COns???

Very nice, but the code is still missing from the drive? Please, can you update?

Hello mate, I ordered the Nano, build the whole system and it works. But not correctly, it shows wrong values, what have i done wrong ? Is the code correct ?

@Nick-ov8ed

Жыл бұрын

Ok works now, but not very accurate.. anyways thx for that build :).

Where are the parts list to any of these projects? PLEASE!!!

Thanks a lot...at least... i download the code!!!...

@CreativeTechos

Жыл бұрын

My pleasure 🙂 Thanks for watching 👍

why my projects stucks in welcome screen, only?

Very nice project

@CreativeTechos

Жыл бұрын

Thanks

Very good project...

What kind of resistor do you use for this project? 1/4 w ? 1/2 w ? 1w ? Thank you for your answer.

@CreativeTechos

4 күн бұрын

All used 1/4W

hello, where can I get a schematic, or pcb file, i want to use with atmega8 or atmega328

@CreativeTechos

Жыл бұрын

Download Circuit Diagram PCB Layout and Code, Link is in video Description

@flowerpt

Жыл бұрын

if you're going 328 look up mega328 transistortester - most of it is done already.

What is price from where we puchase?

can you share the library

What is range of capacitor capacity test I want to test 15000uf 150 v

Top! Bob England

I have never seen anyone use tweezers for full-size components.

@luminousfractal420

Жыл бұрын

Its respectful

@hlmco

Жыл бұрын

I guess it's for sake of clarity

@Umski

Жыл бұрын

Dude’s side hustle is a surgeon 👨‍⚕️ 😂

@mikebond6328

Жыл бұрын

I have a spinal cord injury that has left my fingers numb and tingly and sometimes twitchy. I use to be ambidextrous but I’ve lost a lot of my dexterity. I can’t hold and manipulate small parts, screws, wires, etc., but I can use tweezers to do most anything I want to do with regards to electronics.

@jaysgood10

Жыл бұрын

I use a front end loader for my pcb’s.

good jobs 👍👍👍 but where's the code for that device ?? please share the code ...

Pro thank you very much Can This Tester test Zener ??

@CreativeTechos

Жыл бұрын

Yes, zener diode, inductance every thing

nice project but if i dont have the pcb, can i do it manually?thanks

@JoaoPedro-ki7ct

Жыл бұрын

I think maybe it should definitely work on a perforated board, or even breadboard too, Although I think the breadboard *could MAYBE* somewhat influence the reading of some components and give you not completely accurate measurements, I cannot guarantee.

@CreativeTechos

Жыл бұрын

Just follow the circuit diagram and use Prefboard.

I am not good with coding but if possible could you add a time out so the Arduino will go in to a low power state because i am planing to add a battery to it. so if you read this. can you do that please.

@EuroScot2023

Жыл бұрын

Use a power bank as your battery and add a switch. You won't need to recharge often.

What cad software did you use?

@CreativeTechos

Жыл бұрын

I use Kicad

Which Gerber file do I have to upload to JLC to get this PCB?

@CreativeTechos

Жыл бұрын

Gerber files can be downloaded Link is in video description, upload it to jlcpcb, it is zip file with name of pcb gerber

@RandomTorok

Жыл бұрын

@@CreativeTechos So I upload the entire zip file? As a zip file?

Am I missing something, I can't find a Bill of materials or the Arduino sketch files...

@WLPorter

Жыл бұрын

No file is at this location

@CreativeTechos

Жыл бұрын

drive.google.com/drive/folders/15w02UeEBaOh6N8bI_gTXz1H3hcH8beGo

How did this device work with no complicated components at all? I have seen commercial one have a lot more than a few resistors!

@ixmontalvo3606

8 ай бұрын

The program

Damn, I got my 5 PCBs this morning. Paid 2.00 for them. Thought I had all the components but it turns out that the OLEDs are different. My OLED has 6 pins on it. Can I cut the 2 extra pins off and have it work?

@CreativeTechos

Жыл бұрын

Just connect Gnd, vdd/vcc, SCL & SDA it will work perfectly

What did you use to design the PCB?

@journeyon1983

Жыл бұрын

He said CAD.

A nice build and the code loaded fine. It reads capacitance down to around 20pF but I cant read anything over about 100uF or the readings go mad eg. 220 gives about 580 and 1000uF returns about 2480uF. Resistance and transistors etc seem fine. Inductance is also strange. Anyone else find this?

@RandomTorok

Жыл бұрын

What did you load the code into? I've tried about 6 different Nano's and none of them will take the code. I get an error message that says there is not enough memory.

@AllanMeredith

Жыл бұрын

@@RandomTorok make sure you are using the Old Bootloader when uploading to the Nano

@AllanMeredith

Жыл бұрын

@@RandomTorok I can send you my modified cows if you want?

@RandomTorok

Жыл бұрын

@@AllanMeredith That would be great.

I have been trying to go the link that everyone is posting for the code for this project and it gives me a 404 error. Bad link. Need code please. I have the prototype built. Would love to test this somehow. Thanks.

@CreativeTechos

Жыл бұрын

drive.google.com/file/d/16GnFsCmmTQdYo2CbyKGLcPJCXDChp9vP/view?usp=drivesdk

The placement of the connections are on the wrong place. It should be placed in a corner so it would be easier to connect components in the 3 holes ...

Hello something seems to went wrong with the share. 14 days ago i saw the code there and now as the arduino is delivered and the pcb i wanted to download it and i see only the schematics and gerber in the share and no code :-(

@CreativeTechos

Жыл бұрын

drive.google.com/file/d/16GnFsCmmTQdYo2CbyKGLcPJCXDChp9vP/view?usp=drivesdk

@CreativeTechos

Жыл бұрын

Download it now

@KillerShadow07

Жыл бұрын

@@CreativeTechos thx. now i have to again get out my soldering kit and all components and solder it together. i put it away when i couldn't find the code.

Nice project but without Arduino code it is worthless, so i wait for the code to order the pcb😉

@CreativeTechos

Жыл бұрын

Download code with this link drive.google.com/drive/folders/18em0ODi2XDpijSxr1VFATucaCZgyzD80

Nice project! Too bad the attached PCB file is all wrong!!!!

@CreativeTechos

6 ай бұрын

What is problem in pcb files