I love how he puts his hand on top of the blender lid Because 14.7 lb per square inch of atmosphere isn't enough

@ejon

2 жыл бұрын

Yeah I noticed that too 😄

@MR-rc4de

2 жыл бұрын

That's exactly what I was thinking 😂

@Dimon7677

2 жыл бұрын

haha you so smart?! never owned Blendtec?

@LiftPizzas

2 жыл бұрын

Or he's holding it so the container doesn't fly off of the base.

@priyanshugoel3030

2 жыл бұрын

Conditioned reflex.

Teacher: *Oil doesn't mix with with water.* Kid: *Shows Oil mixed with water.* Teacher: *It's Milk.*

@ronniesalley4354

2 жыл бұрын

Underrated comment

@sephypantsu

2 жыл бұрын

Isn't milk pretty much fat and water?

@BlueBerry20071

2 жыл бұрын

@@sephypantsu no not really.

@sephypantsu

2 жыл бұрын

@@BlueBerry20071 What's it made out of?

@BlueBerry20071

2 жыл бұрын

@@sephypantsu mostly water, minerals, vitamins, and cow fat specifically. Using oil would definitely not work.

There's so much I want to try out with this vacuum blender setup. Vacuum Blender vs Regular Blender: - Taste test of blended foods and drinks. - Is there a difference in cooking time, taste and texture for blended things like tomatoes? - Does one blender clean up easier than the other after use? - Which one blends faster, quieter and yields better overall texture smoothness, or crunchiness for the blended items? - Does either one result in more nutritious blended output? - Is there any difference in how either blended output form either blender is digested by the human body? - Is there a difference in the acidic level of blended output of things such as tomatoes? - Does simply putting drinking water by itself in the Vacuum Blender and blending it under pressure change it's alkalinity at all? - Does egg fry differently if blended in the vacuum blender? - What happens if you blend honey and molasses in the vacuum blender? I could go and on and on lol.

@thaecrasis

2 жыл бұрын

You could do a video series on it!

@morkovija

2 жыл бұрын

time for some breakthrough science!Or cooking series

@_ninthRing_

2 жыл бұрын

Keep going! I love to see how the experiments shown on this channel work to stimulate people's minds - it's wonderful. How much more effective is the vacuum blender at dispersing flavours or colours throughout a liquid? Some flavors are fatty acids & some colours aren't normally water soluble - could this mix them anyway? What else could you use it for..?

@jaanoras716

2 жыл бұрын

having a vacuum blender, the taste is always much better, but especially with foods that oxydise easily

@probalbroganpalma2

2 жыл бұрын

Vaccum blender vs normal blender goes on an' on an" on an' on an' on an' on an' on

*I didn't know my dad knew how to mix oil and water all along!! He has like 10 of those jars!!!*

@self-proclaimedanimator

2 жыл бұрын

Yooo my mother make smoothies with them

@321findus

2 жыл бұрын

Daddy's milk will make you strong 💪

@oogaooga0000

2 жыл бұрын

@@Yuxim gross

@nanomachines9872

2 жыл бұрын

@@Yuxim gross

@UTKETCHUP

2 жыл бұрын

@@Yuxim gross

Learning about the surface tension driving force for the mixing or lack there of in my soft matter module. Very cool to see it pop up at the end and actually made me appreciate the module more!

@JrIcify

2 жыл бұрын

"Learning about the surface tension driving force for the mixing or lack there of in my soft matter module" Until I read the full comment I thought this was a very strange way of saying your brain feels good from watching the video.

The whole time he's talking about science, I'm watching him swirl the glass and mentally shouting... "DRINK THE OIL MILK!! WE NEED TO KNOW WHAT IT TASTES LIKE!!!"

@djdjukic

2 жыл бұрын

THANK YOU! We must have the forbidden milk

@Yourmom-cx8fw

2 жыл бұрын

it's . . . . . . oily

@louieberg2942

2 жыл бұрын

Greasy water. Yummm

@Polygonetwo

2 жыл бұрын

He said he was gonna but then he didn't. >:(

@MsHojat

2 жыл бұрын

Yeah. Namely he could do it with coconut oil mixed with some sugar to get something that might taste half-decent.

My engine worked just like this device when I dumped it in a pond

@1CT1

2 жыл бұрын

Romans 10:9 “That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.” King James Version (KJV) John 3:16 King James Version 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. Galatians 3:26 King James Version 26 For ye are all the children of God by faith in Christ Jesus. Titus 3:5-7 King James Version 5 Not by works of righteousness which we have done, but according to his mercy he saved us, by the washing of regeneration, and renewing of the Holy Ghost; 6 Which he shed on us abundantly through Jesus Christ our Saviour; 7 That being justified by his grace, we should be made heirs according to the hope of eternal life. Revelation 21:4 King James Version 4 And God shall wipe away all tears from their eyes; and there shall be no more death, neither sorrow, nor crying, neither shall there be any more pain: for the former things are passed away. ....................................

@boots7859

2 жыл бұрын

Lol, so did mine when I blew a head gasket. Water and oil mixed in the crank with minimal air resulted in milk-like substance.

@louieberg2942

2 жыл бұрын

@@unnamed47 I was a Godless heathen, but after that one KZread comment I have completely changed my life. For realsies. I am that impressionable.

@Chris47368

2 жыл бұрын

@@1CT1 why? what context does this have to the original comment?

@thesatanicridermotovlogs1772

2 жыл бұрын

Rip

You can make an even finer emulsion by phase inversion. Find the ratio at which this becomes a water-in-oil rather than an oil-in-water emulsion. It is readily detectable by a rapid drop in electric conductivity. If you add just a bit of water to this emulsion and mix it will change phase, and in the process break down the droplets to much smaller size. You can then add some O/W emulsion and change phase again, etc. This way should be possible to achieve a translucent emulsion or even a transparent nano-emulsion.

@user-qn9ku2fl2b

2 жыл бұрын

without an emulsifier the emulsion is only stable as long as the oil droplets cannot coalesce so I don't think that would work if you have too much oil

@derrickthomas1742

Жыл бұрын

Will it dilute in a larger amount of water like a tincture?

@OrenTirosh

Жыл бұрын

@@derrickthomas1742 I’m not sure I understand what you mean by that. Emulsions can be diluted just like you can dilute milk in water.

Another perk of this technique is it allows reducing the lipid content in any dressing, mix or sauce and make "light" ones without any additive.

@monhi64

2 жыл бұрын

I mean there are plenty of totally safe emulsifiers tho, an industrial vacuum mixer sounds pretty expensive lol

I really like the origin of that blender, given the history of KZread! Just think about it, without "Will it blend? That is the question" there might not have been a hydraulic press channel, and thus this channel likely wouldn't have featured crushing things with a hydraulic press when it first started out, or the audience might not have grown as much as it did. Your channel is definitely its own unique thing and stands on the shoulders of giants, and it's interesting to see the path that everything took to lead us here!

@anthonyc2663

2 жыл бұрын

Doesn't "will it blend" come after the show "is it a good idea to microwave this?"

@batlrar

2 жыл бұрын

@@anthonyc2663 Yes it does, which I thought to mention as well, but he mentions that his blender comes from the Blendtec company and mentions the Will it Blend channel, which is why I thought it was neat that it wraps around that way. But yes, that's likely where the inspiration for that, if not the audience, came from!

@newew15

2 жыл бұрын

@@anthonyc2663 I watched that show too

@Gazmus

2 жыл бұрын

Still can't help myself muttering "dont breethe that" every time I see a Blendtec blender in the wild :) Those were the good old days of the internet.

@ShiratoriIsOffline

2 жыл бұрын

Damn I remember that! I specifically remember them blending Bic lighters

I had no clue oil-water mixing could be modified so thoroughly under vacuum. Wild.

This is fairly well-known on the alternative-fuels scene (particularly with jet-engine hobbyists). There is something called HydroDiesel or WIDE (Water-in-Diesel Emulsion) which is essentially regular diesel oil emulsified with water; of course, a jet engine will also run on any other oil, so WIFE (Water-in-Food Oil Emulsion) is possible and, for some applications, preferable. Get the balance right and you have an excellent engine coolant and a fuel which burns more efficiently. The downside is that WIDE has an expiration date and mustn't be stored for long periods.

"But first, let me take a drink of this milk. Only, it's not milk." *Oh. Oh no.*

Okay. Now you know this is what we needed everytime I see these notifications, I automatically press on them. The videos you make get greater and greater! I honestly could never do stuff like you do, and you just posting made my day! 💕👍

@ratboyisback

2 жыл бұрын

If you like his content watch the backyard scientist and nile red

@CyberBorg

2 жыл бұрын

Then go even further with Explosions&Fire

@sayyamzahid7312

2 жыл бұрын

I live in Karachi Pakistan and I follow your website

@sayyamzahid7312

2 жыл бұрын

@@CyberBorg be

@sayyamzahid7312

2 жыл бұрын

@@ratboyisback bsb boy

This can also be achieved in a pressure system. When water gets in a hydraulic system, it produces the same milk colored fluid

I find it interesting that James* reflexively puts his hand on the lid of the blender to keep it from flying off. However, because of the vacuum, there's already over 500 lb of force pushing the lid down. *I had to look up his name, because I realized I had no idea who the "Action Lab guy" was, despite watching his videos for a few years.

I know of artists which use two-part clear *Epoxy Resins* in their artworks. • These products need significant mixing between the resin & hardener components, which unfortunately may introduce bubbles into the liquid (which, if you want the final product to be crystal clear, really sucks). • The ideal way to remove the bubbles is to put the beaker into a vacuum chamber, causing the high-pressure air bubbles to foam out (as the pressure drops), until the liquid resin becomes utterly clear. • This device combines both blender & vacuum chamber in an elegant way - though you'd obviously need to test it with Epoxy Resin to confirm that it's effective. • To prevent the resin from adhering to the blender walls, you could perhaps coat them with a release agent. • This may also work with two-part Silicones.

@kinashy8863

2 жыл бұрын

Exactly what i was thinking

Super cool! Could you add the article to the video description, I'd love to read it!

That’s a really cool device, and I would love to have one. My max price was about half what retail is though. I’ll keep my eyes on it and hopefully it will go down some day

@captainfancypants4933

2 жыл бұрын

get yourself a small engine no one wants that still runs. Put water in the crank case and run it I promise you'll mix water and oil in all it's milky glory.

@Tsxtasy1

2 жыл бұрын

@@captainfancypants4933 small engine is the perfect place to mix your home made Alfredo so it won’t separate when reheated 👌🏽👍🏼

Love your channel. Your experiments are always so unique. Are you going to do a video about your background and how you come up with ideas? Does your face still tingle when you put your strong magnet close?

Now you need to find out if flies can fly in there under vacuum with the blender running.

1:01 Correction: Hydrophilic end goes in the water not in the oil and the hydrophobic end goes in the oil and not the water. In layman's terms, hydrophilic means having affinity to water and hydrophobic means having aversion to water. Hydrophilic part consists of an inorganic part of the molecule like OH-, O- etc. Hydrophobic part consists of an organic part of the molecule like a long carbon-hydrogen chain.

@monhi64

2 жыл бұрын

His picture looks correct must’ve just mixed em up while saying them. Gotta imagine he knows the difference between phobic/philic most people do.

Talking about food industry, in the last years it's more and more common to find light mayonnaise that has half the calories of regulare mayo, where the first ingredient is just water. That's probably how they blend it in

What if you blended in an atmosphere purged of air and introduced other gases, whipped cream dispensers use nitrous oxide not carbon dioxide as it makes the cream acidic.

@user-qn9ku2fl2b

2 жыл бұрын

it will depend on whether you're using a polar or a non-polar gas

From the comments of another poster in one of the sub-threads, it seems like after a few days enough air gets back into the water that the oil separates out. Probably would happen quicker if you re-blended under air -- should try this out in a follow-up video. Also wonder if all gases are equal for catalyzing re-separation, or if some would be better than others (for instance, air vs pure nitrogen vs pure oxygen vs helium vs carbon dioxide)?

@somerandomperson3970

2 жыл бұрын

Good to know. Thanks 👍

@UdderlyEvelyn

2 жыл бұрын

Could store it under vacuum as long as you had a container strong enough to get it to be shelf-stable long-term then. For most immediate-use purposes that's plenty of time, though. I wonder if just being in a sealed container with minimal air would be enough to prevent it from reverting, though, rather than an open container?

That's remarkable. This would work well with homemade moisturizers

@kokomel23

9 ай бұрын

This is what I was thinking, but I’m finding that it separates after some time. I sell products so I’m looking to find more info on it separating. Like if maybe it’ll separate after time, but a simple shake will put it back together in its milky form.

That’s so cool! I wish I had known about this when I was researching which blender to buy.

I've always wondered how to blend my black coffee with grass fed butter or coconut oil. This will probably make it mix well.

Cool, another video from the Action Vacuum Lab ! 😂 Science experiments are never boring with you. 👍👍

It's interesting everyone keeps comparing only the color to milk when milk itself is an oil in water emulsification. The fat and the skim are mechanically emulsified by a homogenizer. Another great instrument of mechanical emulsification that the action lab should explore.

just blew my mind with the vacuum sealer for a blender... amazing...

3:55 The sound of the vacuum working is like a set of dying bagpipes!! 😂

Very intriguing product, I like it! Definitely not going to pay over $200 for a blender lid though. Could make a more versatile complete system myself for less than a third of that.

@captainheat2314

2 жыл бұрын

Proper vacuum pump and a few fittings and vinyl tube as we dont need high vacuum are enough

@MrJackfriday

2 жыл бұрын

@binomalia a vacuum cleaner is dirty actually. it reintroduce the dusts and dirt that had been sucked beforehand. a vacuum pump for fridge gas refills is probably a good apparatus for this

Vacuum works wonders

Fascinating! Great video!

You can also use a piezo atomizer to mix them, we did it in school as a project when I was younger :)

What happens if you blend the emulsion again, but now under normal atmosphere? Will the oxygen that you mix in "destroy" the emulsion (causing the oil and water to separate soon after remixing)?

@user-qn9ku2fl2b

2 жыл бұрын

Blending will make the oil droplets coalesce anyway so yeah I think you'd be back to square one

@religionisapoison2413

2 жыл бұрын

@@user-qn9ku2fl2b probably halfway between square 2 and 1

@paradoxxf

Жыл бұрын

Yeah, calling this a stable emulsion is a bit of a lie sadly. Given enough time no emulsion is stable even though it could take decades or longer for actual emulsified oil and water blends. This though, just by shaking it enough or stirring it mildly to will break emulsion. It's cool but should not be considered stable.

@djestouff

4 ай бұрын

@@paradoxxf I've made some drinks with olive oil/water blended in vacuum and served over ice and it stayed emulsified ¯\_(ツ)_/¯ for at least the ~1hr I was sipping on it

@MrMotchel

Ай бұрын

@@djestouffHow did you make a vacuum? You have one of those blenders?

Does anyone still remember "Will it blend?". That's exactly the Blender of Blendtec. Good ol' times.

This was pretty interesting. I have been trying to duplicate Ballistol pre-mix with canola oil.

This might be one of the best ads of all time and I love it!

Always amazed about how simple water still has a few mysteries... 🤔

@louieberg2942

2 жыл бұрын

It is a remarkable substance.

@user-qn9ku2fl2b

2 жыл бұрын

well that's the thing. "simple water" isn't that "simple", there's lots of dissolved minerals and gases

amasing video.he deserves at least two times more subs than he does now

That makes sense. In waste water treatment and aquariums you can use an air bubbler to remove fats from the water.

i saw a video about a researcher who was studying the effects of the surface of water. in it he explains a small zone is created with significant electrical differences on either side which creates very unusual properties. perhaps this has something to do with the emulsification in the absence of air.

@ejg6f

Жыл бұрын

can you please tell me where that video is?

Hi there. how long can this mixture last in stable emulsion? Will the oil and water eventually separate after awhile?

he is the only creator that maintains mildly interesting content whilst slowly, but steadily getting better at it.

@farticlesofconflatulation

2 жыл бұрын

I think that’s the point. Some content creators keep upping the ante too fast that they eventually reach the ceiling and no longer have any viable ideas.

It would be interesting to know just how many more antioxidants a smoothie would contain when mixed in a vacuum and just how beneficial to our health this could be.

If you replace the canola oil with neem oil, its safe bug repellent for the garden that can help keep harmful pests off of your plants. Both the neem oil and the soap make it hard for bugs like aphids to establish a home in your garden. That was for free.

How would degassed water as a cleaning product work? Like would you have to clean very gently or clean quickly before gas reentered? Also, would you be able to make the same milky emulsion with degassed water and oil mixed gently so as to not introduce air, outside of the vacuum chamber?

Okay, two major questions. First, what happens to the emulsion if you pour it into water? Does it simply dilute and spread through the water or does it separate into the original oil and water? Second, what happens if you pour it into salt, or sea, water? I'm very interested in the results here.

@monhi64

2 жыл бұрын

Hmm well I’m pretty sure if you add water it’d stay emulsified but maybe if you add both oil and water they’ll stay separate. Emulsified things tend to stay emulsified when you add more tho

This is amazing. This must be how thy make coffee creamer. I just bought some and noticed it’s water, oil and flavor and has zero milk. I was confused how thy would get the oil and water to mix. But now it’s solved.

Thank you for this!

Kinda curious what happens if there is more oil than water

I would like to see what the mix would have looked like with your vacuum blender, but without sucking the air out before, also what does the "milky" mix look like after several hours or days settling.

@boots7859

2 жыл бұрын

Have you never mixed oil and water? It would look mixed for a number of seconds, as show in the stir test, and then revert right back to separate substances.

@landsgevaer

2 жыл бұрын

@@boots7859 mixed, yes; blended no. I would also love a side by side comparison, also with fluids that have been under vacuum longer or only briefly before blending (so dissolved air has less time to escape), or fluids that are covered by something so they interact with the air/vacuum in the chamber less.

@thebrisketbrothers8128

2 жыл бұрын

I heard that if you put it on a heater it starts smelling really bad

can you share the article in the description?

Egg yolks and mustard blend oil and water as well. Chef's/cooks call them binders. It would be interesting to have a chef make a dressing using your method. 😂

VERY interesting and thought provoking lesson. Thanks! I will probably get one of these for my BlendTec. The applications could be limitless! My only question is how long does that remain stable for? Indefinitely?

@rosselliot

2 жыл бұрын

I'm also trying to find an answer to this. I found this in an academic paper titled "De-gassed water and surfactant-free emulsions (SFEMs): History, controversy, and possible applications" in the part on using SFEMs in pharmaceuticals: Phase separation due to creaming of the emulsion occurred after days, as experienced in other studies. However, slow separation may not be a problem for this application, since if gassed oil-water-drug mixtures are stored in airtight containers then SFEM's can be regenerated merely by shaking. Then in another article titled "The effect of dissolved gas on coalescence of oil drops studied with microfluidics", I found this: At ambient pressure, the degassing of the continuous phase reduced the extent of coalescence for the model oils, which is in agreement with other reports. So it seems that they DO eventually separate back out, but it takes much more time and could be somewhat prevented by keeping the mixture in an air-tight container.

@BrowncoatBlue

2 жыл бұрын

@@rosselliot Thanks for letting me know!🙏🏽 It's still very exciting, because like you said you could seal this off like in a canning process, and it sounds like we could get a very long time. This is awesome!! Thanks again💯

How long is it stable for? Does it eventually separate over time?

@user-qn9ku2fl2b

2 жыл бұрын

what you you mean "eventually over time". If you have a million years before you, certainly. The real question is: how long do you have to wait-an hour, a day, a week?

@DANtheMANofSIPA

2 жыл бұрын

@@user-qn9ku2fl2b That's the dumbest response I've ever heard

Definitely so COOL 😎. And I’m imagining the Healthful properties of preparing many foods in a vacuum even before final storage. Talk about Oxidation & Free Radicals in Cellular Health! Oh yeah Health & Cellular Integrity. Geez.

If you have a shiny metal bowl (could be ever silver) first wash it with water but don't wipe it, we need some tiny droplets of water here and there. Then add 2 drops of oil and rub it. That white mixture appears. I found this when I applied oil to make that bowl non-sticky

Surely there's gotta be someone who watched this video and thought this could be done much cheaper with a simple FoodSaver-type adapter lid if you already own a vacuum sealer.

You turned your blender into a vacuum chamber. I am officially impressed.

super great explanation as always, and it's clear that physics backs up the use of this product, if it wasn't $200+ id love to get one to mess around with!!

Really neat video, one small point of contention, I believe you meant to say the hydrophobic tails aggregate around the oil while the hydrophilic heads contact the water.

Question, so if you hit the mixture with a florescent light would it reflect a florescent light or color?

@robertt68749

2 жыл бұрын

I also really want to know this

A few days ago I was playing with my children and decided to make a cylinder with some liquid stacked. I put water, soap, oil and they were perfectly separated, everything was beautiful and even after mixing, they would return in their shapes. Then, I decided to try to add some other liquid to see if it would mix, and I added black vinegar. Well, the entire experiment went destroyed: everything mixed together in a unique single liquid black in color and there was no way to get the 4 liquids separated again. I'm not good in chemistry and I could not explain this. Would you be able to explain this? Thank you very much! Love.

@k_tess

2 жыл бұрын

What kinda soap, because you just saw that the purpose of soap is to be able to mix oil and water. On a microscopic level thats why we use soap to clean. So?

@chiefrocka1363

2 жыл бұрын

You need the right amount of each as well.

@monhi64

2 жыл бұрын

Do you have hard water? Sometimes stuff can be dissolved in the water making things weird. Not really sure tho, kind of an odd sequence of events. Something must’ve been preventing the first three to mix well but sounds a bit like salad dressing+soap lol

Ultrasound can be used to make an oil water emulsion. Maybe the vacuum lowers the frequency needed to produce it to under what the blender does.

@louieberg2942

2 жыл бұрын

Could it be that the ultrasound also knocks and keeps out most of the trapped gasses, making the mixing easier to accomplish?

@DavidKennyNZL

2 жыл бұрын

@@louieberg2942 it definitely seems to do the mixing part. An experiment with different frequencies, amplitudes and pressures would be interesting.

My friend's 2003 Audi A3 did this pretty well too when it cracked it's block.

How long will it stay mixed if left alone?

@deving3589

Жыл бұрын

1 minute. Not kidding. If your thinking of how use this for this application it's totally false information. I bought the whole complete void blender with lid. It does not mix water and oil. You'll need a emulsifier this is bad information

Holy shit this is like milk from scratch

@peterjf7723

2 жыл бұрын

But without the protein.

Action Lab: 1. how long will it stay mixed? (at room temp & if stored refrigerated) 2. What happens if you bring it to a boil? 3. What if you degas but re-gas water with pure nitrogen, argon or some other gases: is the issue caused by dissolved oxygen, or any gas?

@nhtom8

19 күн бұрын

Boiling? It's essentially the same thing. Boiling removes all the air from water. The boiling point of water depends on the air pressure. e.g. water boils at a lower temperature in Denver than in San Francisco. If the vacuum pump were strong enough to actually make a vacuum (0 psi) you could watch the water boil as it turns to ice. My high school science teacher demonstrated this in class once. However, the blender would reintroduce air unless you're careful not to let it. A later post here suggests the oil only stays mixed for an hour or so. I'm going back to researching guar gum and/or egg yokes for making "creamer."

Damm thats awesome! So many possibilities come to mind when watching this. 🙂

@The Action Lab I think this vaccum device is helpful to remove oxygen from our daily used eating products. Is it healthier to consume less oxygenated things rather than oxygen-rich ones? I mean which one is healthier between both apple juices?

@redwasprider4442

2 жыл бұрын

I think its more about the taste and looking....

@phillies4eva

2 жыл бұрын

i think the idea is that those compounds in the apple for instance will readily bond with oxygen and free radicals in the digestive system thus removing them. Maybe that's better for digestion? I'm not sure but I know that highly processed foods are almost certainly completely oxidized where as fresh foods are not at all. It's a neat concept. I'd love to see more videos exploring this.

@louieberg2942

2 жыл бұрын

It might be overkill to start vacuum blending just to keep the anti-oxidants. My guess is that a varied, healthy diet with enough fresh food provides enough as it is.

Okay cool, but where's the my little pony figurine?

As cool as all these experiments are, they will never be as cool as you. I’m new but this Chanel is great !

I think it works because your not whipping air into the mixture. Kinda like a candy maker folds hard candy to introduce and trap air bubbles to make it shiny.

Can you bubble air through the oil-water-vacuum mix and separate them again?

@MrSun15920

2 жыл бұрын

I am not a scientist or anything but my theory is that no. It wouldn't work as the two liquids have mixed together to make one liquid, so adding air back wouldn't work.

@MrSun15920

2 жыл бұрын

Other methods might work like how platelets are separated from blood.

@bmagnus2729

2 жыл бұрын

You can seperate it through centrifugation. Or if you leave them long enough, gravity will do it's job and the emulsion will break by itself. Bubbling would not work. Maybe pressurized it again with air will, but this I am not sure.

@pan2aja

2 жыл бұрын

You can add flocullant

Crazy. It does look just like milk. I don’t know what say now when two things don’t mix.

@yagamijubei28

2 жыл бұрын

Never seen actual coconut milk? Like when you make it from the coconut, not the juice. Its actually white and if its left for a while it seperates into oil and water.

Try blending warm water with melted coconut oil. How will the emulsion react when cooled down to the coconut oil’s solidifying temperature? 🤔

One of your more useful videos 🤩

How long will the oil and water stay a stable emulsion?

@randyglynn3849

2 жыл бұрын

I was wondering the same

@yagamijubei28

2 жыл бұрын

For a few hours. You have to maintain pressure to keep it that way.

@connerdickson2962

2 жыл бұрын

This is an awesome question. I know in my vacuum smoothies the mix has never separated throughout a day but I always drink my smoothies before the day is over.

@suiyen

29 күн бұрын

​@@connerdickson2962did you mix satured fat and water in your vacuum?

Not necessarily you can use a Sonic cleaning machine to get them to mix 00:50

@CyberBorg

2 жыл бұрын

Yeah that was my first thought of what he would do using a jeweler cleaner. You can make fine colloids that way.

Thank you for this! Can you tell me how long the oil and water stays mixed? How long would they need to blend to become properly emulsified? Finally, would you recommend this process for a small business that makes hair products?

Awesome. Right up my alley.

The more I watch his videos the more I think about getting a vacuum chamber.

The water and oil is pretty sus

@BoofingPasta

2 жыл бұрын

Very sus

@MarcTheDeveloper

2 жыл бұрын

"you can see it immediately becomes this milky white now" ZAMN 🥵🥵🥵

@BoofingPasta

2 жыл бұрын

18 naked cowboys in the showers at ram ranch

@ooooneeee

2 жыл бұрын

By that logic the colour white is sus.

Sonicator Machine or Ultrasonic Homogenizer does the same job, but that machine is super expensive. So this video was really helpful. ☺

Can you put the link to the research paper in the description? I want to check it out.

Nois

@glenddfujjsbsyhenry5038

2 жыл бұрын

What u want

When an engine block cracks, water and oil mix pretty nice. Maybe it isn't about vacuum, but rather bringing water near the boiling point (vacuum brings water closer to a boiling point at room temperature)

If you want a great salad dressing cheap, just use a washed glas with lid and shake the vinegar and oil before pouring is over. For stabilizing you could use crushed garlic, mustard or aquafaba…

Awesome idea would be to use this to re emulsify buttermilk and butter to make cream again!

Dude you are so cool. Thank you bless you and your family love from Trinidad and Tobago

Great Video. Thank you very much...

Fun, thank you!

Subarus do a pretty good job at this.

Looks like this could be a good way for the do it yourselfer to make an oil/water lubricant/coolant for drilling and machining operations at home so as not to overheat your cutters, bits and workpieces.

i love how 1 guy literally covers my whole science book

Phase transfer catalysts work as well

Interesting! Nice job!