Check out my successful BATTERY RESTORATION with a stick welder video - kzread.info/dash/bejne/fKCHqKZwlrmnYNo.html

Crank the amperage up for 20 seconds or so to wake up cells that are not bubbling. 40 Amps is way too low.

Remember, 80F is peak operating temp for lead acid batteries.

I saw this approach on another channel. I tried it on 3 batteries & only 1 battery was able to recover 3 cells...so I'd say it was a failure. The fumes that came up were pretty strong so being well ventilated is a must.

@DIYHomesteadProjectsDIYHP10

Жыл бұрын

Yes definitely do this in a well ventilated area.

I have used ronix AH4604 MODEL 200A dc welder but it doesn't workout for me i used on other two batteries it still same no boiling of liquid 😢😢😢😢

Did you top off the water in the cells that may have ran low from boiling with distilled water?

@DIYHomesteadProjectsDIYHP10

4 ай бұрын

Yes

Need to crank it up to 130 minimum

@sandasturner9529

4 ай бұрын

I crank it up to 160 amps

Y’all are having the amps too low turn that shit up quit being scared what do you gotta lose I do mine at 150 A I don’t put water in it I leave it kinda low on the water. I put water in it after I get done with the treatment because if you freshly add water to it it’ll boil with that many amps. Y’all are forgetting that the big chargers that they have at the mechanic shop are 200 amp chargers don’t be scared of some amperage!