First 🥇

@Vladimir-hq1ne

2 жыл бұрын

What a nickname, mate! 😁

@windowsxpprofessional

2 жыл бұрын

@@Vladimir-hq1ne :)

@22khuber

2 жыл бұрын

@@Vladimir-hq1ne 🔥🔥🔥🔥

HOLY! That was some intense repair haha, great job fixing that mess!!

While trying to be mindful of spoiling the result - great video as always Phil! And certainly some interesting damage. Thank you for sharing your experiences with us!

@TheCod3r

2 жыл бұрын

Thanks mate much appreciated

Wow it keeps amazing me how good you really are at repairs. you make it look simple but it takes so much patience and skill. really nice fix again m8 👍

I would've quite happily sat and watch you do every single jumper! Not only is it educational, I find it weirdly therapeutic!

What a great job. Well done, very interesting and highly informative!

Thanks for the vid. Nice work!

Awesome job that. Well done Phil

@TheCod3r

2 жыл бұрын

Cheers buddy

Wow! Great work!! Noticed you mentioned this console comes back very soon. Can't wait to see why, lol.

@TheCod3r

2 жыл бұрын

Yeah I'll be looking at that today so we'll find out I'm sure lol

I've just realised is this the one that came back under warranty mate

Excellent work mate , you are the master. Greetings

Nice work. Great job. And keep it up

Nice job m8 awesome repair 👍👍👍

i love 5:06 when you appear new hdmi ports...😂😂😂😂

Hello mate great video and well done on the fix buddy keep up the good work

@TheCod3r

2 жыл бұрын

Thanks mate 👍

Great job mate

Cracking video Phil, the word I would use when preparing the heat sink with an abrasive is keying. You keyed the face of the heat sink with an abrasive pad.

@TheCod3r

2 жыл бұрын

Ah, makes sense mate, thanks for that

Awesome work

Great video just like always

Great video mate!

@TheCod3r

2 жыл бұрын

Cheers buddy

Great fix fella :)

I always love watching your videos, they're so entertaining. Even if I don't understand what's going on. lol

@TheCod3r

2 жыл бұрын

Haha thank you, much appreciated 😊

Great vid bro keep it up 👍

@TheCod3r

2 жыл бұрын

Thanks mate much appreciated

At least they didn’t knock off the cap 🤣🤣. Thanks for the video Phil

@TheCod3r

2 жыл бұрын

Hey now careful, you're itching for a bitch slap Mr Travis 😂😂😂

damn, the customer did a job on that HDMI port! I have found the HDMI ports to be terrible on the ps5! What i do when i repair them now, is add a dab of 2part epoxy around the port, to the motherboard, Just a very small dab, where the ground / anchor pins are.. Just to give it that little bit of help with strength.. Ive had very good results with this method tbh..

@TheCod3r

2 жыл бұрын

I may try that to be honest, this console is back under warranty so it's going to be interesting to see what's happened to it, and whether it's my fault or not

Wow, John Lydons love child has incredible skills! Well deserved of a sub and thumbs up!

love your content mate your a boffin very talented

@TheCod3r

2 жыл бұрын

Thanks mate, really appreciated

Great save.

Great set of skills

Awsome repair

@TheCod3r

2 жыл бұрын

Thank you 😊

when i applied liquid metal to my gaming laptop , i applied it like the videos i seen on yt and it dried up (soaked in) fast, and temps quickly went up to 90 + and causes a soft bsod , where as i put more this time like half of what you put as the die is smaller and it seems to be great at about 60-65 degrees in intensive games depending on if they are cpu based or not of course

what temperature of the soldering iron do you use when removing the pins from the HDMI port? and what is the temperature of the hot gun, when desoldering the HDMI port?

Great video again Phil With the lighting maybe some of them octopus arms with lights on the end where you can position where you want to mate just a thought mate 👍🏻

@TheCod3r

2 жыл бұрын

Yeah I'm thinking something like that to be honest mate

@dadwillfixit1907

2 жыл бұрын

@@TheCod3r be good idea might just give you that little bit of light you need great work thou mate keep it up 👍🏻🤙🏻

I don’t understand how people damage their hdmi ports. Don’t try to jam the console close to a wall and be careful plugging it in and out.

I must confess frustration with such ungrateful, negligent customers. Most of us, including myself cannot even get a PS5 over a year after release. To put it into perspective i have my original PS1 which me mum bought me in 1996. Even my 25+ year old Ps1 plays discs, has no damaged ports.

Why not solder the jumper wires on the pins with the port unmounted from the board? Wouldn’t that provide a little more flexibility and ease in terms of positioning and access?

Hello, Cod3r, enjoy your content. I was wondering, do you have any content related to pc maintenance? Stuff like the best tools and methods for cleaning, like is compressed air ok, is it dangerous using a vacuum to suck out dust out etc...? I'd really appreciate any advice.

@TheCod3r

2 жыл бұрын

Unfortunately not, that video market is kind of over saturated by the bigger channels really so I never saw any reason to make one

@prophetascending9021

2 жыл бұрын

@@TheCod3r Oh, that's unfortunate. Still, thanks for letting me know and I'm enjoying your content anyway so I'll be sticking around. Plus, if my ps5 breaks I know where to send it now.👍

I have series x luckily still working if i get a problem how i get in contact with you and what are the prices to clean it inside that will be needed in a month or so

Do you not get issues with moisture? Can see blur on the camera and monitor in several videos, do your tools not have liquid ingress?

I got my trace wire from an old 120mm pc case fan's motor, it is also enamel and easy to get

@TheCod3r

2 жыл бұрын

Good stuff mate, yeah they do harbour some pretty good jumper wire 😛

hey, just a question why didn't you add the wires 1st then mount the port?

whats that pimp my ride plunger you got the kingbo phil .very bling bling my og :P

@TheCod3r

2 жыл бұрын

Haha they are pretty cool mate (link below). The stopper flips round too so it basically fits different sized syringes a.aliexpress.com/_mKLrNtW

And it's brought back from the dead - Well done Phil.

@TheCod3r

2 жыл бұрын

Thanks mate, glad I could get this one going again

would probably take me 5 hours to run those trace wires since i've only ever ran a single trace wire so far :D

@TheCod3r

2 жыл бұрын

haha you get used to them. This video in total before editing was just a little under 2 hours, so I'd say it took me an hour to run the jumper wires

Thank you for your videos , can you do video explaining the ps4 power sequence

@TheCod3r

2 жыл бұрын

Thanks mate. In what respect? Do you mean on a bench supply or how it distributes power to different rails?

@harounsahnoun

2 жыл бұрын

@@TheCod3r i mean starting from the 12 v rail until it shows picture

Thanks for another great video, a question have you ever ran a PS 5 on an external 12 volt supply? I have one that has a lighting strike damage power supply I can run on bench supply but crashes when playing ps5 games will play you tube and low power stuff all day. PS bench supply is 30-40 amp.

@TheCod3r

2 жыл бұрын

Hey mate. I haven't run one on my bench supply yet but I'd assume it's a load issue you're having. It's best to fix the psu if possible. Generally bench supplies can't put out more than 5 or 10 amps so I'd say if you wanted that route of using an external power source a pc power supply would be more realistic by tapping into the 12v rail

I still can't understand how people destroy the consoles

Is hdmi ports still weak on the new version

Have you ever run the traces first then put the port down on top of them, that’s how northridge fix does it, seems easier than doing that way, although he won’t do a repair if there is more than six ripped pads.

@TheCod3r

2 жыл бұрын

I have but I find it can lead to taking longer if you end up with the pads moving and causing a bridge, so I just prefer to run them after the port is down

The master saves another from Ebay 😆 🤣 😂 😹 so enjoy your videos 📹 😊 please keep them coming 🙏 😀 and here to help get your videos 📹 😉 out to everyone to enjoy 😉 😀....cheers 🍻 mate 👍 😀

@TheCod3r

2 жыл бұрын

Cheers buddy much appreciated

hmmm.. looks like that solder mask is not quite cured to me 😁

do you fix ZX Spectrums ;)

@TheCod3r

2 жыл бұрын

I've never worked on one to be honest

Hi Coder, Are you self taught or did you get training? I'd like to give this a go and any advice on where to start would be much appreciated. Thanks

@TheCod3r

2 жыл бұрын

Hey mate, I'm self taught. While learning (and even now) I watched a lot of videos from people like Andrew Paul, Louis Rossmann and Paul Daniels. KZread can be a fantastic resource for learning material :)

Diode mode?

genuine question.. at 29:15 ... why not some hot glue?

Phil have you tried carbonot by thermal grizzly. It claims pretty similar thermal conductivity to liquid metal, without the mess. Just wondered if any one tried on a ps5?

@John-oo9xu

2 жыл бұрын

Yes can use that, doesnt make a real difference in temp with the liquid metal. You have to renew it in a couple of years tho

@hutchings2023

2 жыл бұрын

@@John-oo9xu I was thinking more because I hate the fact liquid metal can destroy console as its conductive

@TheCod3r

2 жыл бұрын

I haven't personally tried it but I could give it a test run

It’s about time you got some fibre pens to clean the traces

@TheCod3r

2 жыл бұрын

Honestly I don't like using them, they leave fibers all over the board which cab be a nuisance to clean

i have a joy con which works but doesn't work in single mode how much would a repair be?

@TheCod3r

2 жыл бұрын

Sorry I don't fix joy cons, because they're too cheap to replace and they generally cost more to fix than it would be to replace them

@THEG12EG

2 жыл бұрын

@@TheCod3r ok no worries.

5:44 That's hell of a mess. Mate you don't know how bad the cd. Player i have has gone in 20 pin connector all 20 pads ripped and not even visible which pad should connect to which wire of the ribbon cable 😶

@TheCod3r

2 жыл бұрын

Ouch, that sounds like a rough old time mate

@windowsxpprofessional

2 жыл бұрын

@@TheCod3r i just will get the same model of the cd player though I'm not sureif it's available it's more than 14 years old if i can manage in future repairs it shall help me 😃

Pretty is nice, but results are what counts and you get the results.

@TheCod3r

2 жыл бұрын

Absolutely mate, I always have a little code to live by 1) Functionality 2) Longevity 3) Optional Visibility I don't care too much about what it looks like, because the user isn't going to see it. The most important thing is having a working device that will last

wow that was bad but if any one can fix it you can fix it bud.

I noticed 3 strange things whilst watching this video. 1. You didn't sing 2. The Multimeter beeped and you didn't say "shut up Multimeter! " 3. when the Multimeter beeped, I said "shut up Multimeter!" 😳

@TheCod3r

2 жыл бұрын

Haha classic! Yeah I figured most people are fed up of hearing me sing now 😂 actually I think I filmed this video before I started saying shut up multimeter to be honest lol

What would the PS5’s do without you lol

@TheCod3r

2 жыл бұрын

Probably be in the corner sobbing haha

When you have a PCB with lifted pads, but they are still intact - not broken or broken further away but fixable, can the pad be lightly or firmly glued back in place? Like using a small amount of epoxy? Yeah, epoxy is a bit smelly, too! Thanks 🤓

@phifediggy9659

2 жыл бұрын

You could use epoxy provided it's non conductive however it probably won't hold up to iron temps. Gluing any pads is kinda not worth it as it'll likely come loose again with a small amount of heat

@j.lietka9406

2 жыл бұрын

@@phifediggy9659 good answer! Thank you 🤓

@phifediggy9659

2 жыл бұрын

@@j.lietka9406 you're very welcome :)

@j.lietka9406

2 жыл бұрын

@@phifediggy9659 thank you 🤓

@TheCod3r

2 жыл бұрын

Yeah as Phife says, it's likely it wouldn't hold up to the heat. I'd love to find out what glue is used during manufacturing

Such an amazing console, pisses me off how people abuse it, when people desperate for one can't get one .

@hucky29

2 жыл бұрын

I treat mine like royalty 😀

@windowsxpprofessional

2 жыл бұрын

@@hucky29 i only have a PS2 that I gave to someone who recently passed away and i now have no clue where it is :(

How much do you charge for something like this? This isn't a simple swap of hdmi lol

@TheCod3r

2 жыл бұрын

Generally I consider this as a full HDMI circuit rebuild, so I charge £120 on the PS5 and Xbox Series X. The PS4 and Xbox One consoles I charge £90 but the reason for the difference is that they're more time consuming to get into :)

@jamesd1848

2 жыл бұрын

@@TheCod3r You done a great job. Takes a huge amount of knowledge and skill. Price seems 100 percent fair too. Skills pay the bills

@TheCod3r

2 жыл бұрын

@@jamesd1848 thanks mate. Yeah generally I charge £80 for PS5 HDMI ports but then have to add some on for the extra time it takes

I mean this in the best way possible. Your videos would benefit so much with a better microphone.

Lots of bodge wires coming up lol

@TheCod3r

2 жыл бұрын

Haha yep, bodge it and run

@andrewshearstone1101

2 жыл бұрын

@@TheCod3r have u ever tried track paint that can make new tracks

Smart asf u mind iv subbed

@TheCod3r

2 жыл бұрын

Thanks buddy much appreciated

Damn went to make coffee, wasn't first :D

@TheCod3r

2 жыл бұрын

Haha, you snooze you lose ;)

@windowsxpprofessional

2 жыл бұрын

Made myself some too and was on right time😃

I would put the blame on the cat My mates cat loves to have a sly push on his console if left out

@TheCod3r

2 жыл бұрын

Haha yeah it's definitely easier to blame the pets 😁

first thing i did when i got my ps5 was change the solder on all the ports just to strengthen them also done the same for my friends and families consoles those ports are just so weak hopefully sony changes it in a future revision because there is no excuse for it

@TheCod3r

2 жыл бұрын

Yeah they are inherently weak, but this is probably the worst ps5 I've seen to be honest

@marcianzero_yt

2 жыл бұрын

So you voided warranty to prevent some possible damage?

@johnsellers4994

2 жыл бұрын

@@marcianzero_yt warranty doesn't work like that anymore hasn't for a long time you can do the repair and as long as it causes no damage sony has to honor the warranty unless they can prove that the repair is the cause of the fault you are trying to claim warranty on

@John-oo9xu

2 жыл бұрын

Change the solder with leaded solder? That makes it weaker. The factory soldering is always better than afterwork leadfree repair.

@johnsellers4994

2 жыл бұрын

​@@John-oo9xu where did i say i used leaded solder i use a higher quality solder than Sony to be more specific nihon sn100c i have never had one of my ports fail or come off the board unless a customer has tried to force something in or bent them i see PS5 consoles all the time that have come off the pads or bent those ports are a weak point and any technician who works on them daily knows that the factory soldering and those ports are not fit for purpose

Just curious , how are these people damaging the inside of these consoles???? Because they would have to open it up to personally damaged it ???

@TheCod3r

2 жыл бұрын

This one I think was drop damage, but generally there's a lot of inexperienced technicians working on them

@andymouse

2 жыл бұрын

It's when it's got a cable plugged into it people trip over the cable and pull the connector.

First from 🇨🇵 . Trace it ✌🇵🇹

@TheCod3r

2 жыл бұрын

Haha thanks for being here mate

why are you in the loft?

@TheCod3r

2 жыл бұрын

It's much warmer up there than it is in the shed :)

I've had one like this where port was entirely sheered off, but 100% traces were good with 2 anchors ripped lol

@TheCod3r

2 жыл бұрын

Wow got lucky on that one I guess. I'd rather have 2 damaged anchor points any day lol

Omg you should of seen state of my new unit sent back from PlayStation shambles

@TheCod3r

2 жыл бұрын

I'd actually like to see that to be honest

@xboxlegend6789

2 жыл бұрын

@@TheCod3r I don’t know how post it on here bro

@johnsellers4994

2 жыл бұрын

@@xboxlegend6789 you can post it on the discord links are in the description

@xboxlegend6789

2 жыл бұрын

@@johnsellers4994 I don’t do discord but will look into share it coz it’s a shambles of a repair from certified repair location

I'm on my THIRD ps5. No bs. 1st one went into safe mode and froze indefinitely after rest mode. Second ps5 just magically stopped video output 4 months in. And now I'm on the last one I'll ever buy. It's impossible to reach Sony. I had to sell the broken ones and keep finding new ones. Not happy with this pos console. When it works, it's great. Maybe I'm just a walking EMP.

@TheCod3r

2 жыл бұрын

Wow that does seem like a lot of unlucky buys. I wouldn't sell them though, it's better and cheaper to get them fixed to be honest

@tormentfromhell73

2 жыл бұрын

@@TheCod3r unfortunately there are no repair shops around here, some pc shops but NO ps5 guys. And I'm very impatient so I wanted my ps5 back, so i only sold em to put the money towards a new ps5. But if this one goes, I'm done and will stick to ps4 I guess 🤷‍♂️ (btw I love your videos. Very informative)

@TheAlphaWolf2013

2 жыл бұрын

@@tormentfromhell73 Why didn't you contact the retailer you bought them from?

@hutchings2023

2 жыл бұрын

If this one fails come joins us on Xbox 😉

@tormentfromhell73

2 жыл бұрын

@@TheAlphaWolf2013 there's a 30 day return period. All that would've happened is I would've gotten a refund, maybe. But when I sold the broken ones I made a bit more. I tried to figure it out but wasn't able to do much at all unfortunately.

Consoles get lot sensetive breaking down. Back earlier days of gaming such NES,SNES , sega mega drive PS2 and 2 and original Xbox if drop them still be working never had any of those break down in my past 30 years of gaming. Time to PS3 , xbox360 came out that when problem s started consoles breaking down even to to newer consoles such ps5 today. Nothing made to last these days unlike the past. Am kinda put off buying ps5

@TheCod3r

2 жыл бұрын

Yeah newer consoles from the 360 and PS3 onwards are very unreliable. Almost like it's deliberate 😒

@dawnoftruth1

2 жыл бұрын

@@TheCod3r It's called planned obsolescence and it's actually insane to me that it's legal or at the very worst unregulated.

Does the ps5 really come back??

@TheCod3r

2 жыл бұрын

Yeah I have it here, I'll be filming a video today

Wow do they pay you in bags of heroin?

Their* spell check is your friend... Like your videos though.

@TheCod3r

2 жыл бұрын

Haha yup typo 😅

@venomnz6799

2 жыл бұрын

@@TheCod3r haha, what microscope do you use?

w0w 👍🏻

Great content and all but why the scruffy hair? I mean, it takes 2 mins to brush your hair dude - looks like you just fell out of your tumble dryer.

@TheCod3r

2 жыл бұрын

Because I film while I work mate, I don't pretend to be perfect just for the sake of a camera

1st 🥇 lol 😂

@TheCod3r

2 жыл бұрын

Wayyyy off Mr Henderson! 😂

First maybe 👀 😆 🤣 😂 😹 😆

@TheCod3r

2 жыл бұрын

haha nah not this time lol

First

@windowsxpprofessional

2 жыл бұрын

Hope you get it next time :)

@TheCod3r

2 жыл бұрын

haha not this time ;)