Am i the only one who found that crunching satisfying??? 😂😂

@RJHeating

2 ай бұрын

It was satisfying to do 😂 on the old Vaillant’s it used to be so tempting to squeeze them and then you’d come to your senses and remember you are about to choke up the pump, canoe filter and plate 😂

I kinda love the crunchy crunch. Reminds me a of a Vokera

@RJHeating

2 ай бұрын

So satisfying isn’t it!! 😂

Now, this is what you call skills! Better than most surgeons I know!

@RJHeating

2 ай бұрын

Haha, you’re too kind! Not sure I’d be let loose on anything live though 😂

Top vid Ritchie❤. Atleast you got the thing working properly but you would think the manufacturers would have improved the design as this is a common problem.

@RJHeating

2 ай бұрын

Thank you for watching, appreciate it as always! 10-12 years ago we were going around changing the @vaillant ones for this same problem! And then they updated to copper F&R pipes! Still, was weirdly satisfying squeezing the muck out 😂😂

@user-li8gr8ur8l

2 ай бұрын

@@RJHeating it is oddly satisfying to watch buddy❤️

@RJHeating

2 ай бұрын

@@user-li8gr8ur8l 😂😂 it’s the twist! As you do it you hear it all creak and crack!

"I trust his diagnosis "..... 😂😂😂 With the cost of that repair a filter should of been fitted too 🤔

@RJHeating

2 ай бұрын

Did you price it? His diagnosis was correct, just went deeper than he initially expected, which he diagnosed without draining the boiler or accessing any parts. It’s an agents job, who didn’t want a filter fitted, we can only offer best advice 🤷🏽‍♂️

@danielbailey1452

2 ай бұрын

@RJHeating you know I didn't price it 🤣🤣🤣 plate and pump isn't cheap though. As you say all you can do is advise them, if they don't want a filter they can pay you again this time next year

@she_plumbs

2 ай бұрын

To be fair I think the other engineer diagnosed well....unfortunately with the issue of blockages like that it can affect multiple parts which is only apparent when you start stripping it down 🤔

@RJHeating

2 ай бұрын

@@she_plumbs 100% his diagnosis was spot on! The system has clearly been left for a while with no care and no protection etc, not to mention those rubber hoses asking to get blocked 😂

@RJHeating

2 ай бұрын

@@danielbailey1452 I’ll be honest, I was probably defensive in haste, you get so many people on here trying to dig you out! I apologise if I came across rude and took your comment wrong! This is what clients (not just agents) often don’t get, a little extra money now, can save you a lot of money in the near future! As you say, this’ll be choked up again within 12 months more than likely! Appreciate you watching!

Shout out Kelli! With an i not a y 😂

@RJHeating

2 ай бұрын

Gosh, and don’t we know about it 🙄

@she_plumbs

2 ай бұрын

😎😎😎

I’ve had same issue as you with those Viessmans. Those rubber hoses don’t have an oxygen barrier. I’ve been to some that have had the hoses replaced (nightmare replacing the return at the back of the heat ex) and then the system powerflushed. 2 years later the hoses have blocked again - that’s on a system that is spotless. I don’t know how Viessman get away with fitting those hoses inside their boilers. Vaillant and Glowworm used to do it but knocked it on the head, who knows why Viessman haven’t 🤷‍♂️

@RJHeating

2 ай бұрын

Very odd, that’s what I didn’t understand! Have changed hundreds for Vaillant and Glowworm before so it’s a well known issue as you say! Ooh I bet the return is a nightmare! I couldn’t even access it properly for this, had to just squeeze up as much as I could, not great when the heat exchangers just cut out on temp 🥵

@brendanwilkes5333

2 ай бұрын

@@RJHeating to replace the return you have to take the heat ex out - and it gets better. To get the heat ex out you have to life the flue out of the top of the heat ex (on the couple I’ve done I had to). Good luck lifting the flue out if it’s been cemented in. Luckily for me both times I did it the flue route wasn’t sealed in.

Is it hard to take the hose off the top connection? not really worked on these much and never touched this hose before.

@RJHeating

2 ай бұрын

To be honest, I left the top connection on both connected (return is behind the heat ex so would presume it’d need to come out for access) the bottom connections are push fit with clips so easy to pull out then squeeze the tubes and stick a screwdriver out/push the muck down. Appreciate the watch! The top connection looked like it wouldn’t seal again if it came off 😂

Dismount hose,fill with spirit of salt for minute rinse with water,hose clean as new.

@RJHeating

2 ай бұрын

I’m sure that will also work, although, that top hose connection looked like it would definitely pour out if disconnected 😂

What's that cowboy doing in London must be lost.

@RJHeating

2 ай бұрын

I had to double take, was out of a game or something 😂

System needs to be flushed 😳

@RJHeating

2 ай бұрын

It does indeed, unfortunately, the customer currently only has the budget to get them back up and running but it’s on the cards! Appreciate you watching!