For those who are not addicted to the colors of the AN fittings or are not building a Formula 1 where every ounce counts, you can use JIC fittings which are the industrial version made of steel and are WAAAY cheaper. Also choose your hose type carefully, as standard oil line hose is not the same as fuel line hose.

@capnthepeafarmer

2 жыл бұрын

JIC fittings are traditionally used in hydraulic and non-critical applications. JIC have looser tolerances than AN and can't be interchanged with AN.

@oldschool1993

2 жыл бұрын

@@capnthepeafarmer Does that mean I need to go back in time 30 years and re-do all the fittings on all my race cars?

@sugoi4983

Жыл бұрын

what to heck bubba all my dang ol parts are aluminum

@oldschool1993

Жыл бұрын

@@sugoi4983 Let me guess- mud bogger-right?

@flinch622

11 ай бұрын

@@capnthepeafarmer Correct: face angle is different. Anyone else catch 3:38 where he cites JIC 37 degrees spec while showing a 45 degree AN application? If face angles don't match... leak city.

Mike, as always we appreciate you using our product. I know we worked together on this one, but like you said, you've been using Vibrant for a long time before as well. Appreciate the support, can't wait to see the finished product!

Just a note on alloy and stainless steel fittings and fasteners. They are extremely prone to galling. Any little bit of smuts on the threads can cause them to seize before you get them even halfway done up. Clean threads and lubricant is your friend. Depending on the metal and the application you can use oil silicone spray anti seize or graphite dust or even wax.

Very nicely done and I for one learned a lot. Vibrant also has these super cool quick release connectors that are awesome in assemblies that need to come apart with some frequency. If you end up using those it would be good to show them to your audience because most people don't know they exist.

Love the AN breakdown. Thanks for the further education for us all!

A great breakdown and very well shot as always. This is going to make a great tutorial video for KZread even for people not following the build. Hopefully it draws in more viewers to the channel!

I am AN addict of all Mike B content, great lesson, thanks

Also a critical thing to remember about AN fittings. Aviation = 37* (JIC & MIL-DTL-18866) Automotive =45* (SAE) They do NOT cross over.

@thelifeofguyon

2 жыл бұрын

but I want my Corolla to fly

@dougstenger4085

2 жыл бұрын

Aviation is 37°, but it's really important not to mix the two.

@michaelcoffin4364

2 жыл бұрын

@@dougstenger4085 ty. I fixed it.

@stanceworks

2 жыл бұрын

AN fittings themselves are 37*, SAE Automotive fittings are 45*. But any AN fitting like seen in this video or purchased as an actual AN fitting will be 37* if I am not mistaken.

@michaelcoffin4364

2 жыл бұрын

@@stanceworks i had a derale trans cooler come with both actually. Trans cooler was 37*. Trans cooler temp sensor fitting was 45*. Eliminated temp sensor fitting.

Just in case it hasn't been mentioned yet.. If you plan on using braided lines for fuel inside the cabin, always use PTFE hose for the section that is inside the cabin, as rubber will permeate fuel vapour slightly and you don't want to be breathing fuel vapour, unless you do, live your life. Great stuff Mike! Really been enjoying the series!

The performance shop that converted my Lotus Esprit from mechanical fuel injection to electronic used AN fittings... didn't have an appreciation for what they did until I watched your video. Thank you!

Very cool! Thanks for putting this together. You did a good job breaking it down and made it all easier to understand.

Really appreciate you taking time out to make this video, great job..👍

Really great informative video, cheers Mike . You’ve de-mystified the AN fittings I see on every KZread channel but never fully understood

I've been using AN fittings for years and you gave me a couple of extra tips ! thanks for the vid

I really don’t understand why people dislike your videos. I learn something new every single one and I am thankful that you are able to share your processes with us.

Another cool video Mike. The videography is getting more and more cinematic too. Good work!

Wow, I didn't know you could get so many tools for AN fittings. Very informative video Mike!

Sick video! Keep it man. You're killing it

Awesome how to on AN fittings , I always appreciate this kind of video and I’ll be applying to my ride

This is why this channel is so amazing. I'm not just watching someone build a car, I'm learning how they do it.

Super detailed... Loving the educational side of things... Awesome 😎👍

Great stuff. So interesting and informative. Thanks.

Great video. Had no idea on the origin of these hoses, so this was a cool little history lesson.

Great episode! Thanks for sharing

thanks for covering this, very informative

Glad I found this video - been struggling with "which hose to choose" my whole adult life.

Very informative Mike, thanks for this one

Thanks Mike it is always a great start of a day

The video seemed very well done. Keep it up.

haven't gotten to the level of a full AN build but I always enjoy using them when something comes with it ie. oil cooler awesome video, a bit therapeutic

I’m glad you’re using black fittings and hose on this, I honestly don’t think there’s anything worse than stainless hoses and red/blue anodised fittings.

@stanceworks

2 жыл бұрын

I love red and blue fittings on the right build. This one isn’t it though.

Despite seeing them used so much I had never taken the time to really read into AN fittings. This was a very welcome and informative video, thank you!

Love the fun facts under your name at the start of every video 😂😂

Can't wait to see the finished product!

That was cool and informative. Thanks M.

Super informative video! Thank you👍

Great instruction great teacher thanks for share just love the channel

Thank you, this was incredibly informative!!!

Appreciate the how-to. Thanks man.

I myself have yet to get into a build that I did AN fittings myself on. Super nice video to get get your feet wet. Gives me just enough confidence to make some mistakes and try to get it right myself!

@stanceworks

2 жыл бұрын

You can 100% do it!

This is really great information! I am planning on doing AN fittings for my power steering lines on my car! I'll let you know how that turns out :)

Good job. Worth watching and well done.

Title maestro has been earned :) nice how to Mike!

This was a great video! Thank you!

I love it when you talk nerdy to me

Great stuff as always - many thanks :)

Good lesson - thanks Mike.

This was really great. Thanks!!!

Love it makes an engine look sharp liked the video 👍

been so looking forward to this one! stoked!

@kreparAZ

2 жыл бұрын

this was helpful and informative. i dug it dude!!

Sweet. was getting ready to replace the cooling lines on my transmission

Infotainment! Love it just as much as hands on mayhem!

Great episode and really helpful. One thought - if you're using tapered thread fittings on older British cars/bikes be careful as they may have British Standard Pipe (BSP) threads. They are similar to NPT but slightly different taper, thread angle and some sizes have different pitch. They will screw in, but won't be reliable...

Thanks for the video and info.👍🏼

Very nice!! You convinced me!

Such a great video!

Very clear and methodical instructio,n thanks.

love this build

It would be great to see a video on making AN brake pipes when you get to that stage too 👍

Great episode 👍🏾

StanceWorks Automotive School... great video Mike!

Great video thank you for the content

Thanks for the videos

Thank you for this one

Two year old video, which doesn't even matter, still a great informative video. Thanks!

Thanks for this! I look forward to seeing this yellow binky driving.

I did think i wanted to watch this... then the video ended. Very informative 👏

If you don't have sheers to cut your hose, you could shove a cork bung up the hose end with a screw through the back of it. When you're done taking your angle grinder to the hose end, you can use some needlenose pliers to grab the end of the screw and pull out the bung, which in turn will scrape out any hose residue from the cutting, Congrats, you just saved yourself nearly 100 bucks from having to buy the Vibrant shears ;)

Clean! Can't wait to see an engine bay full of this goodness

Was about to go on a custom build for my bike and opted to wait and order the shears... thanks for that! Think it's the first time someones put a dual pass on a Bonneville!

Thanks good info.

I'll be trying Goodridge 811 hose for my fuel lines. It's PTFE but doesn't use an olive, so it looks super easy to assemble. I'd love to hear your thoughts on pushlock.

Very informative content, & I really appreciate your attention to detail on the featured topic. I'd recommend you to demo more products tbh in case any companies are seeking that Does Vibrant also sell fittings to replace onto say radiators using AN fittings or do companies readily have options for them in general?

@stanceworks

2 жыл бұрын

They do, you can buy weld-on bungs from them to add AN ports to pretty much anything.

Twinstick garage was just doing some fittings on his semi. Makes better sense. Lucky day.

Thanks for that.

great video! you’re a great teacher, thank you. have you thought about a career in teaching? you’d be an awesome high school teacher! thanks again!

I like your style. Your efficient and thorough at the same time. You're not wasting our time talking about what you ate for lunch and stupid stuff like that

I don't know if it's AN compatible, but the king of hoses for tight spaces, the ptfe corrugated/convoluted line can be a life saver when you need really tight bends. I used pressed couplings though. :)

Great guide-tutorial......

Yes

Thanks

I think I’m ready to build a K swapped Ferrari after watching that...

Handy. I think I am going to have to redo my oil cooler lines.

Awesome video ! One question, does AN fittings only in use in the USA, or did it becomes some sort of standard across the world ?

Need to find some places to fit these

Push lock AN fittings are super easy to make lines.

Love the super informative stuff. I may never need it, but it's great that you're thinking of us. But mans giving all the armchair mechanics more information to grill his ass with in the comments if he ever makes a mistake on camera.

Prof. StanceWorks taking us to class, and without the aid of Dr. Fingerpencil.

Helpful information. Would have been good to mention JIC here. Often a more cost conscious solution when AN spec/aesthetics is not necessary.

I think the black AN Lines will look killer in the engine bay of the 308.

Dude, my heart sank a little on this video. I was unaware of the different ways to secure (an) ends to ptfe vs rubber. I did my fuel setup with an fittings on ptfe hoses but I used the threaded in rubber type fittings. The build is about 10 months old and no leaks but now I'm a little worried, what are the issues with the thread in type fittings into ptfe hoses?

@stanceworks

2 жыл бұрын

I’m astounded it’s not leaking. I’d correct it immediately and mitigate the risk of fire. Or have the hoses pressure tested at minimum.

@rogermorgan352

2 жыл бұрын

@@stanceworks Update. I don't want to put false info out there. After checking it turns old that I didn't order ptfe lines, even though that was my intention, I mistakenly ordered CPE lines. I run E85 and I've read that CPE will be ok for a few years but I kinda wanted to route my fuel lines in a different direction anyway. Luckily most of the lines are hard line, its just the ones that needed to flex that I used the braided lines on, and the ethanol gauge sensor, but I think I'm going to get rid of that gauge and sensor to clean up the routing a bit. Thanks for the info anyway. Love the Feronda.

Like a lot of car nerds I've always thought A/N was kinda sexy looking when you open a hood and see how clean it is.

Is either line type suitable for under the car? Or is stainless preferred for places that could see road debris, water, etc..?

Hey mate great vid, I’m an aircraft engineer and I make these line all the time, do you pressure test the lines before you install them? Also MS cushion clamps go great with these hoses instead of zip ties

@stanceworks

2 жыл бұрын

I don’t. I’ve only ever had a couple of leaks, so it doesn’t seem worth the time (and I don’t have a test assembly)

I'll never use AN fittings, but I loved the info in this episode anyway! All the good builds use them, so it's nice to know a bit about them and why they're used 😎

@sudseh

2 жыл бұрын

I dunno man, I'm a sucker for banjo bolts.

With the ptfe hose, if the other end already has a fitting on it, you should slide the nut over first before fitting the olive?

@stanceworks

2 жыл бұрын

Yes, you do that either way.

I begin... by adding $600 to overall build cost. Could be more depending on the project. Some careful thinking is in order: there are places to harpdipe, and places for hose.

Great vid, working with these fittings can be an absolute bitch, I worked for the Audi factory Motorsport team and built and maintained a few transams as well as Quattros. We bled a lot while building these lines

@stanceworks

2 жыл бұрын

I’d love to talk to you about an upcoming project…

It's ok Mike, I didn't know that PTFE stood for Polytetrafluoroethylene either, at least until I Googled it two seconds ago. lol

Imperial sized nightmare!