TDI swapped GMT scares the government

@TDISwaps

11 ай бұрын

Exactly!

@crazypeoplearoundtheworld304

Ай бұрын

Truth

Super cool project. I love how much room there is under the hood

@TDISwaps

8 ай бұрын

Ya hindsight we should have moved the transmission forward a few inches, but most everything is very easy to get to

My cousin there in Europe has a Golf Mk4 1.9 TDI.This engine is bulletproof of all VWs. From 101 HP stock now it has somewhere 150 HP. It goes like crazy. This GMC should be better having an Audi 2.7 TDI engine.It has 190 HP and is very bulletproof also.

@TDISwaps

4 ай бұрын

Yes unfortunately they do not make an adapter to the Chevrolet transmission to that engine, I do not think we ever received that engine in the USA either.

That engine bay looks empty. I love it.

@TDISwaps

22 күн бұрын

Best part about this swap!

@j.danaclark2166

22 күн бұрын

@@TDISwaps my diesel sawp isn't quite so empty. I picked up a Hino 4.0L with 5 speed going into a 1990 f150. It actually fits amazing but it takes almost as much room as the 4.9 inline I took out.

@TDISwaps

22 күн бұрын

@j.danaclark2166 that sounds like an interesting build though!

@j.danaclark2166

22 күн бұрын

@@TDISwaps honestly, so far it's going easy. Approximately the same size and shape as the inline 6. I've used chevy small block motor mounts with home made brackets, a modified stock trans cross member and a trans mount from an early 90s dodge Cummins 4x4. Custom drive shafts and divorced transfer case. Everything else is just linkages and hoses.

@TDISwaps

22 күн бұрын

@j.danaclark2166 yup, once you do one swap, they are all the same 😁 make one model doesn't even matter, just start making parts work!

I just bought a TDI ALH engine. I'm excited. Will be putting it in an xterra! Will be taking notes.

@TDISwaps

11 ай бұрын

You will love it man! Thanks for watching!

strong word of advice!!! if you leave that setup how it is and and run compound turbo instead your egt's will drop probably by a good 30% and the turbos will be far more efficient lowering even your intake temps as well by a good margin, 2700rpm at 80mph is pretty high, my tdi (in its natural habitat) runs at about 2100rpm at 80mph, my car is 3100lbs and ur truck is 4800 according to the description so with the boost from compounds if you went that route and with a re-gear (which u said u dont wanna do but) you can probably run around 2200 at 80 to reduce drone and constantly high engine speeds

@ngelemental2274

6 ай бұрын

you can also run leaner to reduce egt's but only if the engines coolant/oil cooling can keep up with hotter lean burn, my tdi DOES have a vgt turbo so that could be further contributing to the extremely good drivability at lower rpm

@TDISwaps

6 ай бұрын

Yeah there's a ton of options to consider but re-gearing and compounds just aren't in the budget at the moment, we're honestly super impressed with the driveability for the little money we have into this setup, with more funding and time we may consider putting more work into it but 90% of its driving is under 50 mile per hour and it's doing beautiful at that

Thanks man keep it up I love your videos inspires me to something with my bew

@TDISwaps

11 ай бұрын

Glad to give you inspiration man! Thanks for watching!

Check out the torque converters for the s10. They shared the same transmissions but with the lower power v6

@gabrielcouch8415

23 күн бұрын

It could give u more options for stall and diameter

@gabrielcouch8415

23 күн бұрын

And if u swap to compound turbos for a tdi. Your egts would be even lower and better spool up

@TDISwaps

23 күн бұрын

@gabrielcouch8415 ya we are talking about it, but it's working perfect for our needs at this point!

Hey man, I live here in Wyoming too and would absolutely love to see this in person sometime.

@TDISwaps

Ай бұрын

I'm sure that could be arranged! You can PM me on Facebook facebook.com/profile.php?id=100014261163897&mibextid=ZbWKwL

finally, a truck that gets over 13 miles a gallon!

@TDISwaps

3 ай бұрын

Lol amazing right 😂

@user-vi4lc4zg2g

3 ай бұрын

@@TDISwaps sure is 🤩

the torque converter from a s10 ho 4.3 93-95 is 4l60e trans converter stall is 2500 the camaro with a 3.4 is also a 4l60e trans they would have pretty good stall speed behind a tdi 4l60 and 4l60e converters will interchange that may help takeoff

@TDISwaps

7 ай бұрын

Yes we didn't want to go that high but it's looking like that's actually what we need, just waiting for a couple other reasons to have to pull the trans and it will get one!

You ever thought about going full goofball and supercharging it as well to get better torque on the low end? Wouldn’t be great for fuel economy but it’d be fun.

@TDISwaps

23 күн бұрын

Haha ya it's definitely a thought, all how much money you want to have in it I suppose 😂

I know on semi applications lower egt means better mpg so if you can get your egts under 900 youll probably get 30-50 mpg

@TDISwaps

11 ай бұрын

Most of our get issues are from high elevation and hills, I think we would see 25+ mpg easy on flat ground. The few places we drive like that egts are 600-800 now. All my vehicles get 4-8 mpg less than normal averages just due to where we live

@james10739

7 ай бұрын

Ya 50 I don't believe will ever happen and 30 sounds like maybe a max

@TDISwaps

7 ай бұрын

@james10739 I agree, I think mid 20s will be about it, but that's still better than we anticipated going into this

@talonpilot

5 ай бұрын

I had a 2000 Jetta that had the 1.9 ALH, I go a solid 44-46 mpg. Driving was mostly hwy with small rolling hills in the Pacific Northwest. I think that engine at 68 mph was running at 2200ish rpm. My stints to 80 were temporary, so I dont recall if it was that high (2700ish), as you are seeing. I would think that if you were to increase your differential gearing, say run 4.10s or 3.55s you would be able to lower it, thereby improving mpg. You say you have enough torque and power (again, it’s not going to be a rockets hip), so I’d start there. I dont recall if it was a 4x4, you could change the rear gear and disconnect the front driveshaft to see what it does EGT wise, rpm wise, and if it gave you better mpg.

@TDISwaps

5 ай бұрын

@talonpilot actually 4.10s would make the RPMs higher, it goes backwards, but once you load up these little TDIs they actually get better MPGs at higher RPMs unfortunately, the load around 2000-2500 they take so much more boost and fuel it has negative results. I started with my jeep at 2600 rpm and 19-20 mpg, now running it at 3000-3100 rpm I am getting 23-24 mpg in the same conditions

Compounds!!!!!

@TDISwaps

9 ай бұрын

Maybe someday! For now we are staying low budget.

Need this exact set up but in my ranger.

@TDISwaps

3 ай бұрын

They work is just about anything!

Hi I have a decently built alh and I had that same boost pressure fluctuation you have when accelerating. I put one of those oil cap adapters for a catch can And the valve cover one and vented to the atmosphere and it's wayyyy better. Can send you pictures and more info if you want

@TDISwaps

11 ай бұрын

That sounds interesting, I'm not sure we are having too many issues, the tune slams the turbo vanes closed as soon as you let off even a little and it makes the boost extremely responsive, that and he was changing throttle positions alot, these newer turbos are so much snappier to throttle change. We also have the valve cover vented to atmosphere.

Nice!!!!

@TDISwaps

11 ай бұрын

I want my own full size now!!!

Ive been watching this unfold and im very intrigued by it. Since GM is putting mini Duramaxs in half tons i just don't see why this couldn't be fine tuned even more. The one thing i have been pondering is, would a guy benefit from a 6 speed allison behind it? I am putting things together for a 2010+ 2wd suburban just for long road trips. Id love to do something like this! You have another follower here my man!

@TDISwaps

10 ай бұрын

Probably the biggest downside to the Allison would be the cost of the transmission controller. I am using one for my Cummins swap, but that has such a short power band it needs all the gears it can get, where the TDI has useable power from 2500-4500 RPM with just tuning, it can be used with far less gears, and being it ran at 3000 RPM on the highway getting 40-50 MPG, even running as much as 3500 continuous is really not hard on it at all. It is way closer to a gas engine power range than most people realize!

@stevenodell9458

10 ай бұрын

@@TDISwaps wow! I honestly didn't realize they are that high rev engines. I am just now getting into the TDI swaps. I myself is a powerstroke, Duramax and Cummins guy. All I've really messed with. A few Perkins. That powerband definitely changes my way of thinking. Thank you for getting back to me!

@TDISwaps

10 ай бұрын

@stevenodell9458 ya that are crazy, watch some of my jeep videos on snow play with the 40" tires and gtb2056 turbo, I'm bouncing off 5000 RPM and 25-30 PSI of boost. They are absolute animals lol. It car be harder to keep them cool in heavier vehicles in the heat of the summer though. I'm usually much easier on them once it's over 85° outside

@stevenodell9458

10 ай бұрын

@@TDISwaps have you done anything with compounds on them yet? Think that would help with the cooling in bigger vehicles? Honestly with 40" tires on a jeep and slinging it around, I'm highly impressed with the durability! Lol im just now opening up to the idea of being able to make power with 4 less cylinders. Boy have I been wrong! Only took 31 years haha 😆

@TDISwaps

10 ай бұрын

@stevenodell9458 yes I do plan on playing with compounds but maybe not til I'm retired haha, the VNT turbos work very well to keep egts under 1000, it's mostly coolant flow that becomes an issue once you try using over 180 HP constantly, I may try an axillary water pump, but I also need a bigger radiator on my Toyota for towing, problem is there isn't anymore room in the engine bay! My summers are short though, it's already back to towing season in Wyoming haha, under 80° I can gross 6-8k lbs and still set the cruise on 75 MPH so I get by for now 😁

Como haces para acoplar la tranmicion en el motor? Y para q la transmisión funcione correctamente? No nesesita estar trabajado la conputadora para que haga sus cambios o como es eso? Me gistaria saber como hecer ese swap xq temgo una silverado 09 y tengo un getta tdi 1.9

@TDISwaps

9 ай бұрын

I'm sorry I can't read Spanish, I can't seem to get the translator to work on my phone either.

Wooooow !!!🫡🫡🫡👍👍👍👍

@TDISwaps

Ай бұрын

It's pretty awesome!

Awesome video! You do such a great job explaining everything and it’s really cool to see these trucks you build with a tdi engine. I don’t know of many people who swap these diesels into full size trucks! I did have one question though. Do you think it’s possible to get 30mpg out of a full size truck like that if it had a manual 5 speed overdriven transmission behind it? If these VW cars are known for getting 40mpg on a regular basis, why does the mpg drop off sharply when you put the same engine in a full size truck? Is it simply because it weighs so much more? Awesome content man I just subscribed👍

@owensomers8572

11 ай бұрын

Late 90s Golfs have a frontal surface area of about 22 square feet, late 90s Sierras have a frontal surface of about 34 square feet. If you add in the exposed area of the tires (the Golf's tires are covered by body panels, the Sierra's tires are larger and more exposed) that's a lot of wind resistance. The under carriage of the Sierra also has more exposed area and angles than the Golf does. It's an awesome build, all of that space in the engine bay reminded me of the bullnose 85 F-150 I used to have with a 300CI engine and 4-speed manual (technically 3 with overdrive), it was so easy to work on!

@TDISwaps

11 ай бұрын

@owensomers8572 ya this thing is easy to work on for sure! And it's doing amazing for what it is! Thanks for watching!

@TDISwaps

11 ай бұрын

I am also in Wyoming with terrible mpg conditions, my cars usually do 35-38 mpg at best. I do think this would be at 24-26 mpg in better conditions, but it's also a huge vehicle compared to the cars lol

@AutoCrete

5 ай бұрын

@@owensomers8572 We get the gist of what you are saying and as far as I know you are speaking pure truth. One other factor that comes to mind is it takes twice as much energy to push a vehicle to 80MPH as opposed to 50MPH. Then you have to take into account the additional 50+% of frontal area with considerable worse coefficient of drag you are looking at near enough double the total wind resistance. I'm rather amazed that truck gets up to and holds 80MPH.

i realize this is almost a year old. what kind of exhaust are you running? back pressure may affect the EGTs as well?

@TDISwaps

20 күн бұрын

Straight through 3" exhaust, minimal back pressure, but mostly the turbo is just small for this big of a rig, that and RPMs are not quite high enough in 4th, all my other rigs run about 3000 on the highway and EGTs are usually under 1000 like that, 2400 is just too low for this big of a truck catching so much headwind

Ya i think a little bigger engine would be ideal get you the better low end acceleration you said its missing from juat being such a small engine but i doesn't know what engines are out there that are good and Readily available

@TDISwaps

7 ай бұрын

And that's the deal really, anything bigger has either limited aftermarket support or costs nearly 3x the price to swap. If you check out my Dakota build, I'm just finishing that up. A higher stall torque converter that slips to nearly 2000 RPM and 5.13 axle gearing is completely transforming the way a TDI can move 5000+ lbs around

Is water injection out of the question? Cheap easy?

@TDISwaps

3 ай бұрын

Well the problem is it would run almost constantly, and we freeze 6-8 months out of the year, so I would almost be filling washer fluid as much as fuel lol

I've seen a couple of these 4 cylinder diesel swaps,only one talked about how high egt was a issue...seems like a bigger turbo and intercooler would be needed if you were going to be doing any real work with it

@TDISwaps

5 ай бұрын

Yes this was a budget build so we only went about 30% bigger than stock, I have went quite a bit bigger on my other swaps. Proper tuning is keep to keeping EGTs under control when you are pushing small engines.

Am I seeing right that the trans still shifts it’s self in “drive”? I know you installed a TV cable but it seems like you mainly manual shift them.

@TDISwaps

11 ай бұрын

The 4l60/700r4 before electronics will shift on its own with just the TV cable, but it often doesn't downshift as desired so holding it in gears or manually downshifting is common

Ive done a ranger diesel swap some time ago. Looking at doing a Yukon or suburban with an alh and 4l60 or 4l80. What are your thoughts on running the 4l60/80 stand alone and what route should I go for the adapter plate? I hand made the ranger swap that I did but I don’t know if i want to go through that again. I would sooner look for a merc power plant. Thank you and it’s cool to see other peoples budget diesel swaps.

@TDISwaps

6 ай бұрын

Thanks for checking out my stuff! Either DCS or TD conversions both make adapters, the TD conversions ones are clockable and give more firewall clearance than the dcs I used on this chevy. Standalone on the 4l60/80 is easy if you manually shift it like my Dakota shifter and switch for lock up, I'm planning to do that on my next build actually.

@AndrewMarsch

6 ай бұрын

Ok great I will have to check them out. Ideally I would like the wife to not have to manually shift the truck but its not a deal breaker. What gen yukon/burban would you be looking at doing? im finding some 2007-2010 ish with blown 5.3's on kijiji for relatively cheap lately with decent bodies. im thinking that should be a good range.@@TDISwaps

what is that digital display with engine info?

@TDISwaps

2 ай бұрын

That is an ultragauge, they have a website

ever thought about compound turboing? run the stock turbo and put on a gt30 for the big turbo.

@TDISwaps

7 ай бұрын

Oh definitely, the tuning involved is extensive though, and remote tuning when you live in the middle of nowhere is even worse. I want to play with it eventually, but I need a lot more free time first

@A2J_Tim

7 ай бұрын

@@TDISwaps I have a compound set up on my eagle talon, with gasoline its a bit complicated on the tuning side, but on the diesel side its much easier. Keep the the factory vgt turbo and simply bolt on a larger turbo to force feed the smaller one, im pretty sure you dont need to waste gate the second turbo as the primary turbo is what controls how high the boost goes especially with vgt. My next door neighbor is running compound on his 12 valve cummins, he has no waste gate on the second turbo, just the primary. On my talon I have an atmosphere waste gate that controls the big turbos max boost but the little turbo's waste gate controls how fast it ramps up, From my experience on the talon the smaller turbo must always be running harder than the secondary larger turbo, Fueling has to be exactly right with a gas engine other wise it will run to lean and melt something or break a ring with knock. On a diesel it different, you just need the extra air so that you can utilize all the fuel you want to throw at it so the tuning is less complicated. I think with diesel its easier than you think.

@TDISwaps

7 ай бұрын

@A2J_Tim well if I'm doing compounds it will be more extensive than that, the HP turbo even VNT will still need an external wastegated to pretty much dump everything to a giant LP that will run like a single once lit up. I'll get there eventually

@A2J_Tim

7 ай бұрын

@@TDISwaps Im currently in the process of puting together a compound sequential set up. exhaust side will be compound, but the intake side will be like sequential where the second turbo assists the other, with out having to force air through the little turbo, they can both pull their own volume and work like twins. I will see how it goes and probably do a video on it.

@TDISwaps

7 ай бұрын

@A2J_Tim can't wait to see!

Did you have to get a custom header? For the bigger turbo*

@TDISwaps

10 ай бұрын

It's still a stock TDI manifold but European spec, also similar to the manifold used on the vnt17 in the 04-05 Passat BHW

Hey buddy how are ya? This is amazing!! I’m thinking a tuned bew might be close to the stock hp and torque of the original 350. I noticed no more shifter thing on the dash. I was wondering about the little screen panel you have. Would that work on the ALH engine? I’m collecting parts for my 69cj5 swap. Thanks for sharing all ya do. God bless you and yours.

@TDISwaps

11 ай бұрын

Thanks man! I think we are at least 20-40 HP over the factory engine at this point 😂. I think you are referring to the shifter in the Dakota swap from my last video, I have 4 running swaps now to keep track of haha. The gauge on the dash is called an ultragauge, easy to find online. Thanks for watching!

@heyyoubuddy6749

11 ай бұрын

@@TDISwaps ya you are right. I’m so glad I found your channel. I’ve learned a lot in a short time. Question do you think an ALH could run on black diesel? I have a system to centrifuge oil, ran it in my deuce. Thanks again.

@TDISwaps

11 ай бұрын

I run even my PD engines BEW/BRM on low mixtures of black diesel ha ha. 10-25% doesn't seem to hurt anything!

@heyyoubuddy6749

11 ай бұрын

@@TDISwaps oh that’s good to know. I was thinking only the ALH would be ok with wmo. I really want the BHW engine , minus the balance shaft junk. Thanks again! Can’t wait for the next video!!

@TDISwaps

11 ай бұрын

@heyyoubuddy6749 glad to help man, thanks for watching!

Would a tdi fit in a jeep Comanche?

@TDISwaps

11 ай бұрын

Definitely!

@460EFI

11 ай бұрын

TDIs are tiny. They'll fit almost anywhere.

Something wrong with the video audio??? I can't hear anything!!

@TDISwaps

4 ай бұрын

Hmm it worked when I checked last ....

afaik the 2.2 S10 had 4l60's, might find your looser budget converter in that application

@TDISwaps

9 ай бұрын

Ya 4l60 torque converters are all cheap even the high stall ones, mostly we don't feel like tearing it apart again just yet 🤣

I’m very new to this, But I’m finding it hard to find the fuel pump,

@TDISwaps

14 күн бұрын

Like the power for the pump in the tank?

@clayton203

14 күн бұрын

@@TDISwapsI was speaking ABOUT THE INJECTOR PUMP

@TDISwaps

14 күн бұрын

@clayton203 so on PD engines there isn't an injection pump, each injector is its own pump

@clayton203

14 күн бұрын

@@TDISwaps ok gotcha, I am so clueless on these, is it as basic as the alh, As far as being run without all the computer stuff

@TDISwaps

14 күн бұрын

@clayton203 no not at all, these are electronically controlled injectors. I build wiring harnesses for all these swaps 98 AHU all the way through 2015 common rail TDI all are electronic. 89-2003 can be swapped with a mechanical pump, but the electronics are much cheaper when I do it

Bro you get a slightly used drug dog ?

@TDISwaps

5 ай бұрын

I'm not sure I follow...

What adapter plate did you use for transmission

@TDISwaps

10 ай бұрын

This was a diesel conversion specialist adapter plate

@coltonowens-ex1yh

10 ай бұрын

I have a 68 Datsun 1400 pick up I wanna swap and I have 4 gm transmissions laying around I wanna use one of them to save some money

@TDISwaps

10 ай бұрын

@coltonowens-ex1yh ya the 700r4/4l60 works nice with OD on these things

Towing capacity? I know it probably cant tow much but i want to know!

@TDISwaps

11 ай бұрын

It seems like with my Toyota and the GMC, the TDI really starts to stress over 8k gross weight 10k and I'm limited to about 50-55 MPH without having to really push the engine to climb hills. Hopefully that helps.

@BarukYahuah

10 ай бұрын

@@TDISwaps it does thank you! So that little TDI can actually pull some decent weight for it's size!

@TDISwaps

10 ай бұрын

@christopherwalker193 no problem! I've had my Toyota at 6k gross with fencing and it drove pretty much like normal at 75 MPH. It was cooler out though, no AC on or anything

Do y’all sell any of these vehicles

@TDISwaps

7 ай бұрын

Everything is for sale in my book, but these generally aren't in good enough condition to justify the asking process for the swap/labor.

Bew ?

@TDISwaps

7 ай бұрын

Yes sir!

I couldn't see your ac or power steering

@TDISwaps

Ай бұрын

If you go to the playlists and look at this build, there are whole videos on each step. AC hasn't been finished yet, but you can see how I do it on my Toyota and Dakota swaps.

@crazypeoplearoundtheworld304

Ай бұрын

@@TDISwaps I'll go check it out. I'm wanting to do a Colorado pickup swap.

@TDISwaps

Ай бұрын

@crazypeoplearoundtheworld304 nice! Yeah we haven't gotten this k1500 completely finished yet, but the Toyota and Dakota are 100% functioning like original

@crazypeoplearoundtheworld304

Ай бұрын

So how much you charge to do the conversion for me?

@TDISwaps

Ай бұрын

@crazypeoplearoundtheworld304 unfortunately I don't have time to take on other swaps right now, it's a goal in a few years though!

What rear gear does the truck have?

@TDISwaps

8 ай бұрын

Just the stock 3.73 gearing front and rear

The volkswagen powered GMT isnt real it cant hurt you. Tdi Swaps: "tHe VoLkSwAGeN pOwErEd GmT iSnT rEaL"

@TDISwaps

11 ай бұрын

Just keep saying it over and over again until you believe it 😂

@ryancollins3227

11 ай бұрын

@@TDISwaps waiting for a alh hummer build to really strike fear lmfaooo

@TDISwaps

11 ай бұрын

@ryancollins3227 🤣🤣🤣 I'll work on that

You could chase weight now, take a few hundreds pounds off that truck it would help a bunch.

@TDISwaps

10 ай бұрын

Ya it's doing pretty well now, unfortunately over 70 mph I think we are fighting aerodynamics more than weight, my Toyota does better on EGTs even loaded heavier than this truck empty.

@uliwehner

20 күн бұрын

@@TDISwaps may need an air dam in the front, like all the newer trucks. they say that gives you about 2mpg on the highway.

@TDISwaps

20 күн бұрын

@uliwehner ya there's a lot you could do, but it doesn't see the highway much anyways

nice job. with all that gas money u saved, u can buy a new windshield.🥸 don't get any speeding tickets

@TDISwaps

9 ай бұрын

Haha yeah cuz windshields aren't getting any cheaper though 😂 the speeding tickets are a real deal!