The Rhino RR01 is a V10 Kit Car
Автокөліктер мен көлік құралдары
Rhino Racing, a company based out of Lithuania, recently revealed their RR01 prototype. It's a V10-powered DIY supercar, designed to be built in a home garage. Despite its lower price tag, the RR01 kit can compete with top supercars- thanks to the lightweight fiberglass body, mid-engine design, and chassis-mounted rear wing.
NOTICE: Clips used from other videos are fair use and fall under U.S. copyright law because this work is transformative in nature, and has no negative effect on the market for the original work. It is against the law to fraudulently claim a copyright on a video you do not own under the DMCA or to abuse KZread’s copyright claim tool. Copyright concerns and takedown requests can be submitted to: quickshiftcarreviews@gmail.com
This video isn't car buying advice, I am not paid by nor affiliated with the brands featured. Remember to do your own research before considering any of these vehicles, as I cannot guarantee their legitimacy.
🔵REMEMBER TO LIKE AND SUBSCRIBE🔵
Пікірлер: 289
I like it. And don’t have to use an expansive Audi engine, cheaper Chevys or can be used, and still be a beast.
@MARCO-rq2ph
5 ай бұрын
Yes but the sound and redline of a Lamborghini V10 Is on another level😢
@albow4oops5
5 ай бұрын
Yeah, I can buy a hot LS and 5 replacements for Waaaay less than that audi mill.
@thetruthspeaker1978
5 ай бұрын
For less money you can build an lsx that will only rev 800 rpm or so less than the V10. But you will have way more grunt from a lsx..sound is in the ear of the beholder@@MARCO-rq2ph
@pauls5745
5 ай бұрын
yeah, like LT1 or any LS would be just as cool plus you have tons of resources
@LILJ830
5 ай бұрын
I think the mounting would pose a few issues. But it could be pulled off.
We need more projects like this. It truly shows what a car is.
Best kit car I’ve ever seen. I love the backend, front, mirrors, everything. Looks better than an R8 in terms of exterior.
@Gingerbreadwastaken
3 ай бұрын
The backend could use a bit more aggressive splitter It feels kinda unfinished without it but except that it looks incredible!!
Lithuanians know how to make a good looking automobile!
I hope the company giving you some money to promote them. Without you i wouldn't know half of these kits out. Like vaydor, vale, and this. And much more.
Eh, it’s ok. The issue I have with it is the company touting the Audi v10 as its motor. They aren’t cheap to source, maintain or modify. Why not use the GM LS platform motors as their base engine choice, with the Audi 10 being an option. I feel like a lot more people would be interested in the car. Me, for one, as I have two LS3’s and a LS7, as well as a LM7 (5.3), all just sitting in my garage as I build them for fun. Heck, if you’re willing to do a little work, you can make well over the Audis 500 hp with the 5.3 for less than $1,500! It just seems like they priced themselves out of the market that is most likely to buy their kits. I predict, that without a LS engine option/availability, they will be out of business in less than 4 years. Hopefully, they will see the light. It really is a good looking car!
@Yueymosthated
5 ай бұрын
You could order it without the motor
@bigczad9869
5 ай бұрын
Its easier to get the audi engine then the ls in eu
@JasonMcCord-qk3yb
5 ай бұрын
@@bigczad9869 ah, That makes sense! Thank you for clearing that up. In the E.U. I can understand it then, but in the U.S. the Audi V-10 is a 10-15K motor, if you source a used one…. I’m pretty sure I don’t want to know what it costs new…. Let’s just say: A lot! In the U.S. when we build a kit car, it’s usually so we can have something unique or different for a lot less money than other people pay for a more “average” performance car. Basically, if it costs more than a Corvette, it needs to outperform a corvette by every metric! Otherwise the Corvette just makes more sense… You know you built a truly great car when it costs a LOT less than a Corvette and still outperforms it by most (or ideally ALL metrics) metrics, but it’s pretty hard to out-build the major manufacturers, especially when it comes to things like “fit and finish”.
@JasonMcCord-qk3yb
5 ай бұрын
@@Yueymosthated Yes, but would you then have all the mounts for the V-10 and its associated transaxle? You would be almost dealing with a “swap” situation, I think. It would be sort of like getting an Audi R8-10 that had its motor and transaxle removed and you bought the rolling chassis. Having done more than a few engine swaps (a few of which I would later wish I had never started, once I got partway through!). I can tell you, it’s not always fun putting a motor in a place that it was never designed to be used. Rewarding, yes. Fun? Rarely. Now if the company were to offer a LS engine option (Or other easily sourced engine), I just feel like it would make more sense. And who knows, maybe they already have something like this in the works! Every company has at least one guy that will say “Hey, we could put an LS In that!” Trust me, I know. I’m that guy at my company….
@user-kv1lm6xj5x
5 ай бұрын
Unlike the Audi v10, the engine from GM, the LS series can still be bought new, they are manufactured, and they are not so expensive, these engines have a large community, they have a very large amount of tuning. And the guys are just short-sighted and just took what was closer and in quite large quantities, due to the fact that the Baltic States until recently was a vacuum cleaner for the European used car market. Or in general, they took what was in the garage, and probably did it for themselves first, starting to build a frame around the Audi engine. And then suddenly a business plan appeared))). Everything is simple.
With a V10 from Judd it will be awesome!
@thetruthspeaker1978
5 ай бұрын
Dude a Ford Pinto with a Judd would be awesome ..those engines are what Jesus puts in his builds..😂
Kit cars have definitely come a long way looks good
99k subs. Thats a great year. If you dont hit it in this 5h you will evntually hit it in 2024 regardless so... Great year🎯💯🔥 Keep going 🏃🏿♂️💪🏿🙏🏿🔝
Looks better than most cars out there today
Very very nice front . As good as anything out there . The rear could use some more styling IMO . Looks a little bit kit car . It's still very nice though . Great work . I think other power plants will make it more accessible. Love these guys
this will be my car, I don't want a car that you pay only for the brand, but a car that is worth what it offers on the road
I haven't watched this channel in a while. This guy's voice got *deep*
love the design 🔥keep them coming
This is the best looking exotic I've seen in a while kit or not. Hate the wing though.
I really like this car. Very nice styling. Engine choice and transmission are great. I would like to have one!! Absolutely beautiful.
Love the channel. If you're up for making a video on our kit car I'd love to share some details. Our prototype is the blue car in the upper right in this video clip on LS engines. Production of our kits should be starting later this year.
This thing is pretty cool, but I think they're making a mistake not using LS platform, or at least offering it as an option. As good as the R8 v10 engine is, you can get an LS7 for half the price and that would make it a lot more appealing to anyone seriously interested in building one of these. Otherwise, this puts it in price range of a Factory Five GTM and that's a much better car.
@valdzeelis25
5 ай бұрын
i heard that you buy car without engine and gearbox and you can put inside whatever you want.
@djsonicc
4 ай бұрын
@@valdzeelis25 I'm sure you can put whatever engine, but then you have to custom fab mounts, harness, etc
@StandUpHubBrasil
4 ай бұрын
And sound like a old tractor? 🤣 nevermind. This v8 sounds trash always
@thegambler9994
3 ай бұрын
@@StandUpHubBrasil Depends on choice of crankshaft, and how evenly matched your exhaust headers are. There is a V8 build with perfectly matched headers (8-1 merge collector, equal length) that turns it from burbles to rotary-smooth revving. You pay a pretty penny for the custom piping work needed to get that fabricated.
@theairaccumulator7144
3 ай бұрын
LS is overrated. Old and sounds pretty crap
$70k, nice kit, but makes me wish factory 5 still made the mid engine 818 for $12k & based on subaru wrx & use an sti built motor & bigger turbo for up to $20k so $35 total for 818kg car with 818hp.. thats koenegseg record fast 1hp/1kg.
@tedclark7860
5 ай бұрын
818 kit has been stopped for a long time now.
@Leonn_.
5 ай бұрын
That was my dream car for sure. 818 was soo cool.
@conchobar
Ай бұрын
@@tedclark7860 They should remove it from their website then.
This is a nice prototype I've ever seen and it looks affordable. I hppe to see the Rhino in thr streets soon.
I was waiting for this video to drop after Rhino popped up. That said, the interior could use a lot of work. Hope they offer a GT version at some point.
Love the design ❤them coming
Best car ever! If it were not a kit I would make the purchase. Who wouldn't buy a supercar $27,000
Looks awesome!!
Absolutely love this
Sounds like a good idea and great car however there’s no better road going kit car than an ultimate rs
@nicksmith8557
5 ай бұрын
That is very true!
@joltran3276
4 ай бұрын
Slightly more expensive. Of course on paper it’s a superior car. But this car is likely for a different market.
I’d consider getting one! Looks great 😮
There's good reasons many kits use LS engines I too do not want an Audi engine in my life thanks.
Absolutely beautiful❤
Have been doing a bit of homework on this "kitcar" I am definitely interested in knowing more as soon as you have anything new please !
Definitely looks the part
Imagine this one with a billet 2jz running around 800hp??? Critical awesome
I wonder how difficult it is to get this engine with a manual. I know it was offered, but they are rare and much more expensive now. As cool as having an Audi V10 would be, frankly I'd be fine settling for something a little cheaper but still as powerful, like an LS or Coyote build (or Voodoo) with a Tremec Magnum trans.
Es genial !!! El Porsche del futuro.
Its gorgeous for a kit car and the panel fitment looks great in the promos. The price is ridiculous though. You can buy a used Audi R8 V10 for the same price. The Audi R8 will have a nice interior to match its exterior and more safety equipment. The R8 can be daily driven.
Nice one ❤
Thanks for letting me know what and where Lithuania is. I had wondered.
A good build would be 100-120k there’s a lot of other options at that price point
Awesome ! I would use the 427 NA LS engine ! 505 horses
If this kit is still cheap by the time I could get it I got a dope build for it I just hope it doesn’t end up like Vaydor
Sick 🔥 🔥🔥🔥🔥🤘🏽❤ Luv it
Oh wow i love the doots
You can drop a Lamborghini Huracan V10, which thats what im gonna do. Add some Italian inspired livery, and away we go!!!!!❤... you had me at A/C & Android Auto. 😮... with this car, and the Lithuanian backed WEC PORSCHE team kicking ass, im starting to appreciate Lithuanian gear heads. 🎉
The single upright wiper is standard purpose built road racer aero.
Ford gt crossed with porsche 911? Its got a good if not unoriginal body but the engine part and transmission give me doubts. I need to see thus car performing in its basic set up with full specs. Great video, got more information than the Rhino channel.
This is good, everyone can be able to purchase a sportscar without breaking the bank
I want one now
Clever use of saw horses
Holy shit had no idea they were from Lithuania!
can I do a VW 1.8t? the V10 might be an issue; as there aren't many available...easier oil changes too w/the 1.8t
Whats the rigidity of the chassis? Looks cool, though my favourite kit car is still the Ultima
That price brings it in to Ultima territory as well as a few others, and it certainly won't beat those well established cars. Then, think of all the cars that are built already that can match it and what you're left with is a European pipe dream. I still love seeing them try of course, but I don't think this is gonna gain traction.
T6 aluminium means it is heat treated to T6 but it does'nt specify the alloy itself ... (although I'm guessing 6061-T6)
Cheap very fresh and affordable
Its come with out an engine. The thing is with this , you can like fit any engine (Possibly not ANY engine like a v16). Its just a kit .
Pagaliau kazka verto sukurem.. Šaunuoliai.!!!!
Bout to buy this and throw in a Prius engine 😎
Cool tool kitt karr..
Throw the 8.0L Chrysler v10 from the VX1 viper in that and it's my automotive wet dream.
The first clip of the car driving is it losing traction at low speed in the wet. Encouraging
I Want One!
Man if they could box this and ship it all the customer has to do is open the top and the front of the box, then put gas in it and drive it out of the box that would be awesome! They'd sell like hot cakes!
I want this so bad. I love this. I'm getting this if I can get this street legal in India. Or atleast legal to import and use off-road.( Track)
"made of T6 aluminum"... T6 is the heat treat, not the alloy. My guess is that it's 6061-T6, but the picture at 0:49 looks like the aluminum portion is welded, rather than bonded which removes the heat treatment from the metal. I suppose it's possible that they anneal and then retreat the entire chassis, but what are the odds that a small start up company has the resources to do that? Nevertheless, looks like a great car! I want one
@user-kv1lm6xj5x
5 ай бұрын
There is no metal production in this small country. Even I am sure that local universities do not produce specialists familiar with materials science. However, the Balts, when they entered the Soviet Union, always had a very developed motorsport, with an appropriate level of engineering in car teams, they made excellent racing cars out of boring Soviet cars of dubious quality. And in the years after independence, these countries became a source of very cheap European cars for their eastern neighbor, assembled from several broken-down cars. The garage business of assembling "saws" and converting "total"s to a running condition was very developed.
@TheCraigy83
5 ай бұрын
ive broke several mtb trials frames made from 6061 & 7005 & 7075 , the 6061 definitely weaker.. i think bars stems crank arms are mostly 7075 .
@brianb-p6586
5 ай бұрын
They may start with T6, and end up with a lower effective heat treatment after welding... specific results highly dependent on the alloy, of course. The Rhino Racing website specifies "6061T6", so your guess is correct.
One day, i'll buy that and i'll put in collection of 10 supercars
It would be amazing with a BMW S85 engine or the V12 out of a 760li
Keep the window wiper in the back seat till it rains seeing you're the expert that installed it in the first place right? 🌞
reminded me of Porsche 918
That's great that's an awesome Buy you know I know there's some kid cards are just a lot just as good as those supercars I prefer it would be stick shift though I don't like that automatic
I like it. Personally I’d prefer a version with the R8 V8 with a true manual shift.
I wish this nice one
Ooooo 🇱🇹? Cool…that’s the country’s first-ever home-produced car eh?
If ima Register it...what make and model can i put for this?. It looks like an lotus 😂. Around the same price point too. Idk about this one.
I'd put a volvo s60R engine in it for the same effect (power to weight ratio)
It is a box Tube Frame not a monochik chassis.
Ya esta disponible y es legal?
Put in the worlds highest power to weight ratio engine from Elmer Racing instead (Thor engine). You can easily get over 2 hp/kg with that engine since its less than half the weight of the v10. More than enough. Also they have lighter turbo parts which could drop lots more weight on the turbo. So turbo and engine is lighter than half the v10.
Can we get a manual version?
this kit car uses a v10 with an incredible exhaust note (plays a video of a v8 r8) lol
can u register the car to drive it on the road or is just for track ?
@arnas6831
4 ай бұрын
its road legal
@user-dn9kk9qu5y
3 ай бұрын
@@arnas6831 ow is it street legal and other kit cars are not what makes this one street legal /??
I Liiiike, very Interesting 👍 👍
would definitely put a voodoo ford mustang motor into it
Bmw v10 probably would be the best route to go. M5 and m6. 2005 til 2010
To good to be Real
Is this available in the United States?
I'd source my powertrain. Ford Triton V10 (98-03) and Subaru AWD would be ideal.
Wow
Wonder how difficult it would be to get this to pass road legality test in uk.
This is what the new Dodge Viper should be like
Looks good, finish fit looks good enough, and the chassis design displayed in the video seemed pretty decent too. But ditch the overpriced V10 for something with lower mass, with off-the-shelf service parts - a Toyota V6 with a pair of turbos and a transaxle,.. or bring the price right down with V6 and FWD transaxle, adding a clutched supercharger, make it easy to drive light throttle around town, then an animal on the open road or at track days.
How much? Street legal in North America?
I thought it was made to be used with any engine? Or did the short i watch lie
Laba, Laba❤ Lithuaibian.
can they ship to machnester ???
Cool!
I WANT ONE IN RED !!!!!!!!!
@Based4Life
4 ай бұрын
Based, red is the best color gang 💪🗿 (although this car will look hard af in black)
47k for the engine? That’s nuts.
@benzas
5 ай бұрын
you can buy used one for 10k
I would rather have this with the dodge viper v10
I watched your K1 video, website has an electric kit, however the buyer still has to source the e motor, battery, b management system, when a kit has a total electric together in a box be sure and let us know. Would be fun to make an affordable E roadster
I would avoid the v10 Audi engine. My tech told me the head gasket lets go and it’s $6k for the work