BUY THE SAME PLUGINS TUMAY USES! (and support the channel) SSL E CHANNEL bit.ly/38LfoOf De-esser bit.ly/3yRgDGj Puigchild bit.ly/3wDkjK2 SSL BUS COMP bit.ly/3MJFcc8

@checkmatenate

Жыл бұрын

don't get suckered into waves 3rd party plugins, just learn how to use all the stock plugins first, and Pro tool subscription based model is trash. Use a flat rate DAW. like logic or Ableton, Cubase Studio One, and if you got the brain power use reaper. buy some courses online instead of learning off KZread on how to mix. then once you get the daw down, the routing down, how to record and sing, and learn signal flow, then you can upgrade your studio with higher end interfaces and analog gear. Don't monkey see monkey do because that approach to music will rip your wallet to shreds. unless you got all that money ignore this comment.

alex is underrated, most engineers talk equipment, he made his mission to show people that if it soudns good it really doesnt matter what you use

George, your videos are soooo dope. Thank you for this man.

One of the best ones I’ve ever reviewed

@TheUndebunkable

Жыл бұрын

I need you to remake this video but on Logic Pro X if you will my good man

@itsvis

Жыл бұрын

yoooooooo

It's good to see him not using a shit ton of plugins just on the recording template. That makes absolutely no sense but so many people still do it.

best yt channel. Learning so much with u!! from brazil 🇧🇷🇧🇷

@georgetmusic

Жыл бұрын

Happy to hear that!

i’m happy i stumbled across this video

Your channel is so helpful! Appreciate all the attention to detail you put into each video :)

Why does he use the puigchild 670, which is a stereo plug-in, on vocals? Vocals are in mono??

I transitioned from Logic and this vocal template feels like a whole manual. Great vid tho!

GREAT video bro

There are two flaws in the template you made: 1. You didn’t assign the input of the ‘All Vocals’ aux (no input). 2. You added a mono plugin (Puigchild 660) to a stereo aux, when you should have used 670.

@TopakliEnes

Жыл бұрын

The All Vocals need to have the Input Lead Vocals right ? So the tracked audio goes into Audio Track 1 ( only Autotune) then the signal goes in to Lead Vocal with all the EFX and Send and then to All Vocals and then to print ?

@RAYSHIO

Жыл бұрын

These Auxes goes straight to master bus or to a group first?

@itsk3vn

Жыл бұрын

what would that input be?

@khwezzofficial2842

Жыл бұрын

The all vocals input will be the bus named “ all vocals “ on your bus drop down tab. You’ll see it named because you’ve already named it when you made the “ lead vocals and BG vocals “ output

@Svrge

Жыл бұрын

@@khwezzofficial2842bro u are too clutch

so when done w a session would i mix within this template for a full song or start a mew session for the mixing and mastering side?

George i love ur videos

@crashgocrazy

Жыл бұрын

hey

thank you !

Would you record with input delay compensation on or off?

Can someone make the same template on Logic Pro.

Im having trouble getting an output when I drag the vocal down. Can Anyone Help with that?

u re my professor !!!

As an ableton user Im confused on the tracks and the routing? How would this work in ableton?

@officialdiomer

Жыл бұрын

you can create groups for your vocals and instrument busses, and create send tracks (also called return tracks) for your delays, reverbs, etc. I was also confused when I switched over to Logic but creating groups worked so well for me. just make sure you keep an eye on using stereo plugins whenever you're working in the groups bc otherwise the tracks will be in mono

Smartest video editing on YT !!!

@georgetmusic

8 ай бұрын

Appreciate that

Can you give us a link to download this template? Appreciate you

@ThatsJoshTyler

Жыл бұрын

Make it lmao

dang man did you actually screen record and sync your video with AT? you're gonna go down a legend...

@frankgatsbybeats3999

Жыл бұрын

He's not going down, he is going up!!!

Did step by step and I can’t hear my vocals once I drop them down from the tracking to the audio tracks :/

@DerekRiver

11 ай бұрын

Same

So is he printing his background vocals from the bus? I see stereo vocals in the beginning of the vid

@georgetmusic

Жыл бұрын

He is printing the entire mix

Fye

CANN u make a template 4 thiss?>

Big G!

Can any1 explain, why does it need so many tracks? is it so there can be different effects and processors on everything or what? Cuz id guess one phrase of rap vocal should have the same effect as the next phrase, else it would sound wierd

@BoggleJoogs9

6 ай бұрын

Watch until the end he explains why

Anybody know the use of the print track?

@algoalgo1000

Жыл бұрын

In the video he says smt like "Here you can mix sh*t and add plugins like compressor"

I noticed the lead vocals action wasn’t explained 😢

Is it possible to make something similar to this in fl studio?

@freebeat2289

Жыл бұрын

of course

love the intro music its so avengers

What acts as the master fader with this template or do we not always need one when recording and mix n mastering

@georgetmusic

Жыл бұрын

Don’t need one but the print acts as a mater for Alex

Hello,what is the max level for recording lead vocal on this template ?

Yes my template and what I teach is basically the same !

@George T Music what's the advantage of recording the takes on the "tracking" track at the top of the template and then dragging the takes one by one to the correct track, compared to recording directly on the right track?

@wildsurvival4940

Жыл бұрын

This way you are recording completely dry vocals and add the effects when you drag it down.

@T1M_Dx

Жыл бұрын

It’s more of a workflow thing. He’s using that ‘tracking’ track as his ‘live’ track or ‘hot’ track. That’s the one that has the microphone connected to it. For speed and logistic reasons he’ll just use that track to record a take, if he gets a good take he’ll drag it down to one of the numbered tracks below - almost as if he is committing to it. When you’re in a long vocal session you might do 10/20/50 takes of the same line until you get it just right at which point you drag it down and move on. In a lot of modern music vocal lines also overlap, so the advantage of having several tracks to drag takes down on is that it let’s you visually build the vocal arrangement and ensure that no words are getting cut off at the start and end of phrases.

@MrArtVein

Жыл бұрын

This is industry standard. Any major engineer I worked with drags takes down

@grimrichman

Жыл бұрын

Cause you want to be able to change the effects after right? Lmaoooo

@distortion_plus

Жыл бұрын

I'm not George T but my reason for dragging down is: your tracking track will almost definitely be louder than any of the other vocal tracks. It's at a level that is comfortable for the artist to hear what they're doing and has a comfortable reverb and compression etc for them to perform to. It will also be panned in the centre. If you're stacking up doubles/triples, BV stacks, etc a big stack of backing vocals will be at a lower level and some of them will be on the left and some on the right etc. If you record on the tracking track, the artist hears what they want to as they sing it, then you drag that good take down onto a track that is set to balance with the music more like the finished record and if it's part of a stack you're dragging it onto a track that is already panned and running through processing that suits that part. Otherwise if you record it onto the BV track, you need to record it, then turn it down and pan that track, maybe then re-route it to the processed bus that was not comfortable to sing through. It's much slower. You basically want a load of tracks that sit in the mix similar to how they will in the final song and then "fill them up" with recordings from the one track that you set to the artist's taste. It takes less time and the artist isn't waiting around. Hope that makes sense.

I know I must be doing something right cuz this is literally what my template looks like plus some other bells and whistles.

😊😊😊😊

Thanks for sharing! Need this for FL

@ezurg01

Жыл бұрын

You can do this in any daw bro

@TopakliEnes

Жыл бұрын

@@ezurg01 the routing in FL is horrible

@oneebaez

Жыл бұрын

you can easily do this in fl 21 now check out quinton bobbits video on it

@fdgggfh24

Жыл бұрын

@@oneebaez thank you! I will watch it

What did he say at 1:42 about the solo and auxes??

@YEOTTI

Жыл бұрын

Solo safe aux which mean even when you press solo on something you can still hear the effects/aux

@JayTheYTGuy

Жыл бұрын

@@YEOTTI Oh thanks.

I got FL thoe :/

I just remade this template for Logic Pro, lmk if y’all need it

@RedLuxeStudios

Жыл бұрын

I do. if you wouldn't mind. I use logic pro.

@Kuno331

Жыл бұрын

Hey bro I need it. Can you hook it up please? 🙏🏽

@freebeat2289

Жыл бұрын

Would be awesome! You want my discord or something?

@jpthastoner8217

Жыл бұрын

Where can I get it

@siyabongamtshali9631

Жыл бұрын

yo brodie, do you think I can get a hold of the Logic version that you made? bless🙏

Your the GOAT 🐐

Bruh isnt the print track supposed to be an audio track not an aux track ? For when you actually print

@georgetmusic

Жыл бұрын

Yes I just made a mistake

@josezarate7x

Жыл бұрын

@@georgetmusic thanks for replying bro!! I thought i was trippin lol

Me I think each song or artist need it different

No download link?

@jacksheretoo

Жыл бұрын

Be grateful bruh god damn it’s a gift your able to even see this

@kiaeshghi6999

Жыл бұрын

It doesn't take long to make, honestly. It's also good practice to do so.

Why you lookin thru my soul in that thumbnail bruh

Tumay used puigchild 670 and you used the 660, why is that ?

@georgetmusic

Жыл бұрын

It was a mistake on my end. I was just trying to show the settings mainly

@shawnwaldron1018

Жыл бұрын

@@georgetmusic kool

I can’t even move the lead you not telling us all the steps

theres no link for downloading this for free? it would be a big time savor and more efficient

@kaiirosarchive

Жыл бұрын

facts lol im making a fl and pro tools version

@ikkasingh4682

Жыл бұрын

@@kaiirosarchive bro i appreciate your efforts, please be kind to share link with us ✨

@tiyane9966

Жыл бұрын

@@kaiirosarchive drop da fl version gang😇

@babiiedollchosenfamily530

Жыл бұрын

Drop the logic pro if you can

@pcasimire

Жыл бұрын

@@kaiirosarchive Can you send the fl version to me if you ever get it done, I'm confused on how to translate what's being done on pro tools to fl

do you sell more templates like this? I saw your chrisbrown one is that like this just more detail?

@georgetmusic

Жыл бұрын

The chris brown template is different from this one. Its a replica of the one Teezio uses to record chris brown

Pls someone make for Logic Pro

@BeattapeFactory

Жыл бұрын

its the same shit for logic... the daw doesnt matter

@gera6511

Жыл бұрын

@@BeattapeFactory yeah I know bro, I just tryna save some time 🤣🙏💫

@JiiNxMusic

Жыл бұрын

@@gera6511 lol stop being lazy, I’ll recreate it for you

@gera6511

Жыл бұрын

@@JiiNxMusic 🤣🙏

@geontaydavis1331

Жыл бұрын

@@JiiNxMusic when u got it done… lmk

Wait so no master track?

@georgetmusic

Жыл бұрын

The print acts as a master

Yeah he uses the generic template all mixers do, only determining factor to make songs good is the microphone, room and hardware quality then most of the work is already done for them

why would I want this template ........I don't use the stuff you use........ and I don't want to use the stuff you use.....no waves plugins......never needed waves....I use sonnox hdx plugins......cube tech plugins

@officialdiomer

Жыл бұрын

you can apply the same bussing template with any plugins

Templates are only good if you know how to mix, and they don’t work on every song so you’ll still need to tweak settings, most of you are looking for a “fix” all type thing which doesn’t exist..just being lazy!

@officialdiomer

Жыл бұрын

true. I think having templates is so good to just save a lot of time setting up sessions though. even if you cleared out all the plugins shown and added in completely different ones, you save time by having your routing set up properly. and if you're working with your own vocals or someone you always work with, having that foundation helps you move quicker because you're familiar with the sound you or they are looking for

@marcd3on605

3 ай бұрын

Thats why you tweak and save as template. of course, ever songs will need minor adjustment. but for tge most part, the vocal chain is repetitive. Travis template/track preset, young thug template/track preset. Etc It’ll make you faster and makes mixing a lot easier.

@TheRealJuLoso

8 күн бұрын

No that’s not the point of why artists need recording templates lol it’s for us to just go & get things going as easy as possible w out the engineer having to do so much AFTER bc he knows what typa sounds you’re going for , or jus wants u to make as much music as possible ATLEAST recorded.

@marcd3on605

8 күн бұрын

@@TheRealJuLoso isn’t that what I said in translation?

Me I think each song or artist need it different