That’s the quickest way to turn a white paint job into a yellow paint job😂

@gregchabot7160

2 ай бұрын

And rust after a winter or two.

@rubiconadventurewithscotty3258

2 ай бұрын

and rainbow colors to stainless steel ~!

@wellthatdidntwork

2 ай бұрын

I doubt magnaflow would design it in a way that it would cause it to start yellowing

@rubiconadventurewithscotty3258

2 ай бұрын

@@wellthatdidntwork Stainless does get a nice rainbow tone, ask moto riders !

@wellthatdidntwork

2 ай бұрын

@@rubiconadventurewithscotty3258 i was responding to the initial comment which is why i said yellowing. And i am a bike rider and stainless shouldnt turn color that far back altho if it should happen to do so it doesnt look bad. Normally if its gonna turn it will do it closer to the header where the exhaust is its hottest

Should've stopped at the side exit through the body. 😂

@rubiconadventurewithscotty3258

2 ай бұрын

While correct, there is nostalgia at play here. Brad make it clear he was going to mimic the military vehicle he was assigned to back in the day....

Those holes will definitely never rust,especially with the primer they used.

Those gonna be some hot grab bars...

The tricep burner 9000

@salmonstone2358

2 ай бұрын

😂😂

@charlieh7869

2 ай бұрын

Lmfao

Thats pretty slick. Until you slide up against a tree and the whole thing gets ripped off and takes half the tub with it

@pstain1

3 ай бұрын

Yep and paint cause of the heat

@77th_KiLL3r

2 ай бұрын

Or rust will take over the bare metal

@dmwi1549

2 ай бұрын

I’d assume stainless=no rust I’m going to assume the rear cargo portion will stick out farther than this. Nice for fording water. I’d like a rain cap so exhaust while idling is directed upwards and not back towards people and rear “patient” area.

@77th_KiLL3r

2 ай бұрын

I mean the body of the car

@dmwi1549

2 ай бұрын

Good point. We’ll have to watch to see how this works out.

Wow!!!! A v6 pentastar exhaust sooooo cool 🙃

@mikehoncho3099

2 ай бұрын

I thought they might of had a himi in it and was going for side exit through the hole but nope just a pointless stack on a pentistar

Very interesting. Having Magnaflow involved with this project is amazing 👍

@luvmtlife73

3 ай бұрын

WHY???????

@dtcdtc8328

2 ай бұрын

​​@@luvmtlife73 Magnaflow is one of the biggest names in exhaust and they make they super quality stuff. I think anyone in the automotive industry would Honored to have Magnaflow work with them on a project.

@boosted.

2 ай бұрын

Not amazing….. shaming.

I’m teetering on whether I like it or not. It’s definitely quality, and craftsmanship.

for when the only time you need to squeeze between two obstacles is when you've got the starbucks drive-thru screen on your left and a really mean lookin curb on your right...

I'll be looking for those next time I'm at the grocery store!!!!

You are going to need the first aid kit treat the burns from the exposed pipe.

@Krankie_V

3 ай бұрын

...it has a heat shield

@rubiconadventurewithscotty3258

3 ай бұрын

Looks like double wall B-Vent pipe to me, fully furnace rated

@frankorobinson1540

3 ай бұрын

No different than a motorcycle 😂😂😂caution HOT😊

@TACTICALNOMAD

3 ай бұрын

That perforated pipe is a heat shield. It makes it a double-walled exhaust. No burns.

@Flagship_Alexander

2 ай бұрын

Нет. Во-первых, это не выпускной коллектор, не такая уж она горячая. Во-вторых, у неё есть защитный кожух, который будет просто тёплым.

Now I could see this be awesome for the 3.0 diesel gladiator!

Good idea! No truck has ever rusted down there before. That would be a great place to run an exhaust 😂

@BigWolfBoy50

2 ай бұрын

Aluminum body inside n out

Just like the military version of the Humvee

Anytime anytime that guy from Magna Flow shows up it’s gonna be awesome

That oughta feel good when someone grabs it to climb into the back seat 😂

Wow! Magnaflow getting involved with a couple channels I follow. Outstanding!!!

Another example of why magnaflow is the best! Top notch craftmanship

Don't understand why people post shorts of stuff but the only show the small close up and not a full screen finished product cut into it.!

I have a feeling this is in preparation for the water tank and extended fuel tank. Exhaust pipes under the vehicle are a huge challenge when trying to do either one, and I think Brad’s doing both (unless I missed an update)!

@rubiconadventurewithscotty3258

3 ай бұрын

Good point, clearance is seriously gained

@1a1u0g9t4s2u

3 ай бұрын

Did not think about that.

@rubiconadventurewithscotty3258

3 ай бұрын

@@1a1u0g9t4s2u Don't worry, Brad is our Guinea Pig

@jeffmcbusa

3 ай бұрын

I came here to ask "to what end ". Wondering if it was a cosmetic thing. But I see now. Make sense.

@rubiconadventurewithscotty3258

3 ай бұрын

The suspense mounts!!!

You got the money. They definitely got the time.

omg. its literally any jeep to ever exist. congrats

I can’t wait to see the extended video for this exhaust setup.

Craftsmanship at its best. Sounds awesome

@TrailRecon

3 ай бұрын

They really helped bring my concept to a reality with some excellent attention to detail.

Yes, I'd like a wake up call. Yessir. Your gladiator is neither a jeep or a truck.

@jaredlancaster4137

2 ай бұрын

It's a jeep. Not the best jeep, but it really is.

Amazing work look great

Engineering at its finest! 🧰

Tyhle trubky ze kterých to vyrábíte vyrábíme pro vás v naší firmě, jste perfektní, dobrá práce

Looking great Brad

@TrailRecon

3 ай бұрын

Thank you kindly

@delta21002000

3 ай бұрын

@@TrailRecon always welcome Brad Thanks for sharing

Doc is looking fabulous ! Great realistic, usable rig! ❤

WOW! That is really cool! Would be a really neat addition to a 3.0 liter diesel Gladiator.

Oh this is awesome!!

That is 🔥💯 Great looking, buddy

Nice touch. Great tip-of-the-hat to your vehicles of choice!

Why 😱

Now, do a matching one for a snorkel air intake on the passenger side

와우~ 이제 진정한 트럭이 되었네. 멋지네요! 😄👍

Приятно посмотреть когда работают мастера своего дела👍

Takes you back to your humvee riding days, I bet!

Wahw! You should put it right up through the cab and driver seat..

I kept looking at the upload date to see if this was April Fools joke….. make more sense now that I understand it is a nod to older military vehicles.

It’s pretty awesome. Would be awesomER if it was a Cummins swap

Are they going to market that? I love the heat shield. Very nice!!!

@mikecrowley6487

2 ай бұрын

Now do the passenger side

This is awesome, reminds me of a HMMWV exhaust with the fording kit. Would have been on the old ambulances as well, really enjoying this build concept!🤘🏼

Good job Bro 👍

Wild looking

Isso não é só um profissional é um mestre.👏

Very cool ! I Hope they took into Consideration Frame Flex. That Pipes Pretty tight in that hole. Hopefully all that stuff is connected by a Long Flexible connection inside some where. Taking Engine twist & all the movements into consideration.

@rubiconadventurewithscotty3258

3 ай бұрын

Great point - Put a camera on it PLEASE!

@wellthatdidntwork

2 ай бұрын

I can almost gaurantee they thought of everything before even started

Coolest exhaust I've ever seen on a gladiator, just wish what was under the hood had a bit more bite 🔊🔊🔊

Very Humvee like!

Reminds me of the Dodge Little Red truck at the 70s… So cool… Brilliant!

@TrailRecon

3 ай бұрын

Oh ya, took a little inspiration from that and the old military Jeep Willys and Humvees.

@malachi2371

3 ай бұрын

@@TrailRecon if I were to win the lottery, I would match that up with a Hurricane 500! Thanks for the inspiration!

The guy at the end that laughed had it right

I’m not going to lie kinda jealous I want this on my infantry tribute build

California is ganna love that

most excellent!!

DON'T TEASE US Brad Where's the full video, I'm dying over here, my best friend is building his gladiator into a trail service vehicle, so I gotta show him this exhaust, he's gonna love it 🤘😁

Why do some people still gotta be negative about something that you are doing that they can not or won't do? That pipe on the outside with all the tiny holes in it is the heat shield, yes it will be hot but you will treat it just like your regular exhaust pipe coming out from the back of your car or truck. They act like you're going to go grab it when it's hot, some people need a dose of common sense.

The perfect exhaust for the perfect pavement princess

Hi Brad, love the build! Thank you for sharing!

@TrailRecon

3 ай бұрын

Thank you! Very excited about this new addition.

Very cool.

Would have liked to see the whole thing from a bit further back when completed

Very cool

When’s the full length video dropping. Magnaflow has a killer facility

Sounds good

All of that for a Pentastar V6?

Yes!!!!❤❤❤❤❤❤❤

I dig the cinematic music. The standard rock-style fabrication music is getting pretty tired these days. Oh, and that exhaust is sweet!!

Magnaflow🎉❤

Motor T in the Marines, gives it Humvee looks all day!

Reminder that unique =/= good

FINALLY! a use for all those gotdam nutserts I bought when I only needed the one.

Parts and labor probably worth more than the Gladiator was when purchased

I like it !

Niceee job

Man you're gonne have this thing just about waterproof by the time you're done with it. Someone will call for an emergency at the bottom of the lake and you'll be all "I got this."

Gonna have to do a flex test

Well don't get it water deeper than the floor pans now. Also a great way to remove some of the structural integrity too

Красота.! Надо свой самокат им подогнать, такую же хочу😂

“Let the passengers deal with the drone”

@wellthatdidntwork

2 ай бұрын

Magnaflow wont drone, one of the many things i love about them

Nice.

저렇게 위로 올라온 머플러가 달려있어야 진짜 트럭이지... 캬~~ 멋있다~~

That’s bad ass

I was thinking this was gonna be one of those videos where they reroute the exhaust into the cabin and delete the cat

잘보고갑니다 그대는 장인 입니다 최고에요 👍 👍 👍

So cool. It's more noisy, there's more vibration and more vehicle drag effecting mpg for no reason!

@tommys2979

2 ай бұрын

You seriously think a round pipe will affect drag that much....and how does making a side pipe make "more vibration" youre drunk

@Helloverlord

2 ай бұрын

@@tommys2979 When a wind tunnel test of a small family car was done, conclusion was that already aerodynamic side mirrors were to blame for 5% fuel increase at 40 mph, open windows takes 10% more, and so on... and not to even start on side pipe, it's so obvious. So, I might be drunk, but at least I'm not the dumb one here...

@wellthatdidntwork

2 ай бұрын

Im lost, i didnt see the title that said "trying to fabricate an exhaust to maximize mpg."

I like it, but I also like my turn down. Should have put the tractor flapper on it, that'd be sick

I am digging this a whole lot! Since your truck was the first... did they save all the specs, measurements, and templates? Would they consider making this a complete kit and sell? I am MOST DEFINITELY INTERESTED in this. I'm liking it a whole lot! Please get back to me. Ouhh-Rahh and Semper Fidelis Doc!

Such a clean look!

@TrailRecon

3 ай бұрын

Thanks! There was a lot of thought and planning that went into this.

That is going to turn into the forbidden popsicle 🔥 🥵 .

The 3.6L sounds so tough

“It could be longer I think.” That’s what she said

Aussie's been doing this in Ute's for years

Nice

I want one 😮

Nice GG

A how to, on how to add extra vibration and rattles.

Best exhaust I've ever seen

@TrailRecon

3 ай бұрын

Thank you! I'm really excited about how this turned out... more to come.

@Austinandjules

3 ай бұрын

@@TrailRecon can't wait to see a whole shot of the drivers side. Keeps us updated with doc.

Novel idea, hope you don't find yourself in a tight squeeze where rock sliders won't help.

All that work and it's STILL a Jeep... haha 😂