I did not know about the needles facing forward - thank you

I know this was an old video but thank you. I was leaning towards Ricoma but not anymore.

@SmallMcCalls

Ай бұрын

Go with Braudan, Tajima or SWF. In that order. Please don’t consider anything else. I’m speaking from experience.

It is complete BS that you had to pay for fixing your machine that is supposed to be under warranty! And to charge you shipping for the part that broke is unbelievable! I'm current shopping for a multi needle machine, this is great info, thanks!

Hello Brittany. We have had nothing but issues with our machine. It will run smoothly for a bit and then out of no where tensions go all out whack. Ricoma's customer service is a complete joke. I wish my husband would have done better research before getting this machine. I absolutely hate it. It embroiders so messy in comparison to other machines. I know it isn't our digitizer either. We have tried numerous digitizers and always with the same result. I didn't have my machine up and running for 9 weeks. Yes, 9 WEEKS!!! We have yet to have a month with it running enough to say that it has been paying itself off because it is not the case. Just when we think, great we have a customer that needs several items, this just might be the month we make enough to not have to pay out of pocket, something ends up happening, and I end up sourcing out the job. We have the 1502 and never have both heads worked equally well to say we can run two jobs at the same time. This machine absolutely sucks and their customer service, even more.

@brittanybriggs3806

Жыл бұрын

I'm really sorry that's an awful feeling.

Your video was very informative and I did learn some new things from your video. I have the TC 1501 and still learning it.

@brittanybriggs3806

5 күн бұрын

Happy to help, I've learned so much about my machine since filming this video.

This is exactly why I own all Brother Embroidery Machine. This is absolutely a horrible experience. A machine that’s costing you money but is not making money because is not working is ridiculous. I wish you well with dealing with Ricoma.

@sirmounty

4 ай бұрын

What Brother machine have you got?

I glad you made this video, I was going to buy a ricoma, I think I’m going to pass and get a brother

Great video. Learned a lot . Thank you very much for sharing this information.

Thanks Brittany, I've been googling like mad trying to figure out which way I turn my top tensioner to shorten my threads! Happened on your video by chance.

Thank you for the input here on KZread. I really appreciate it. As soon as I am stable I will definitely buy a Tajima.

this info was awesome thank you for sharing !!!

this is a really great video. Thanks.

Yes this was very helpful thanks.

Omg thanks for sharing this. I definitely need to use the needle to align the needles front and center. I get that bunching on a few of them. Great tips, thank you, thank you!

@brittanybriggs3806

Жыл бұрын

You're welcome happy to help 😊

Thank for the information.

@brittanybriggs3806

9 ай бұрын

No problem 😁

Thanks, great information.

@brittanybriggs3806

Жыл бұрын

You're welcome

Thank you so much for sharing what you learned. The needle tip was fantastic!! I struggle with changing the needles all the time! So happy I found your channel. Now off to watch your past videos. 😀

@brittanybriggs3806

Жыл бұрын

You're welcome, happy to help when I can.

THANK YOU!!!

Thank you 🙏🏽. Your video was helpful

@brittanybriggs3806

Жыл бұрын

Happy to help

Great threading and needle tips! I have not been putting my thread behind the little hook! Also trying to set the hole to the front by eyeballing it is hard. Using another needle is so simple!!

@brittanybriggs3806

Жыл бұрын

Happy to help

This was so helpful because i have trouble with my Ricoma but i lnow most of ir os lack of information and operator error. I need to set time aside to talk with them. In the oast, the will send a short video to watch which became frustrating

Brittany, A whole month without my machine I kept telling Ricoma that the videos they were sending me were not fixing my issues they even sent me a email telling me that they wasn’t going to call me to look at the videos and fix it . Girl that got me heated I called back and told them that I wanted a tech and I wasn’t going to look at anymore videos . Finally after 2 days we finally got word of someone that they found a tech in my area . we had a tech come to my house to look at my TC-1501 , the tech was good but he didn’t know everything with the Ricoma machine and I was disappointed about that like you I want someone more informative. He fixed my problem with tape until we get the part which is a Thread Break sensor . I knew it was much more serious then those stupid videos they had me looking at. Anyways good luck .

@brittanybriggs3806

Жыл бұрын

It's never fun when the machine had issues, but luckily everything has been running smoothly since then.

@fancyfaceq172

Жыл бұрын

Yes I still feel something is still off with the machine but don’t know what or perhaps it’s just me lol .

@brittanybriggs3806

Жыл бұрын

@@fancyfaceq172 don't give up hope, I filmed this video back in October and had another Ricoma tech come back out a few weeks laters replacing another hardboard.

Very good video!! Following and will be on the look out for your future videos. I am waiting for mine from China as I type..lol

@brittanybriggs3806

Жыл бұрын

Thanks for subscribing, I'm trying to release new videos twice a week.

Basically, all that information was provided in my online training that I received for my MT-1501. I have had my MT-1501 for about a month now. Hoping I don't have the problems you have had with your machine this early into having it. I would have been upset too, about paying for their travel for warranty work!

where can i have a holder like yours ?

Hello Brittany. I'm in the Orlando area also and recently acquired a Ricoma from a friend that shut his business down. Is the tech local or nearby? I need a tech to come out and was ticked when Ricoma told me a tech would have to come from Miami and ran down the cost. If not Garfield, have you found one near us?

@brittanybriggs3806

Жыл бұрын

All techs are sent from Miami, I had both Garfield and Alejandro help with my machine as they don't have anyone local and you'll be paying a pretty penny if they come out. However if you need your machine looked at you might not have a choice.

I’ve had a Ricoma and all I will say is…never again. Great video, keep at it.

Hello, my name is Lupe =) How to I put Thread on the Bobbin ?? I received my Ricoma .. NO Thread on the Bobbins

@brittanybriggs3806

4 ай бұрын

Check out this video from Ricoma kzread.info/dash/bejne/d4KMlKmDnb2xY6g.htmlsi=_Je611BXajwPd_iW

Thats crazy they charged you, Ive had a tech come out twice and never had to pay anythng.Have had machine for about 3 months..

Thanks for the needle tip! Also will be ordering the silver round plate thingies too. I have been machine embroidering with a home machine for 20 years. I have owned 3 expensive Brother machines in that 20 year period and the last two were nothing but problems. PLUS there was no one available to help me like we have with RACOMA. Now I have the MT1501. What a learning curve! I'll be learning right along with you! I am a new subby!

@brittanybriggs3806

Жыл бұрын

aww welcome, I'm learning with embroidery it's all about trial and error.

@blissfulacresoffgridhomest2098

Жыл бұрын

@@brittanybriggs3806 true but so worthwhile! Soon you will be making fun in hoop projects (ITH) and a another fav of mine is Free Standing Lace (FSL). Look on my channel for the FSL video I made with my Racoma. Oh! and there is mylar embroidery!!! How sweet it is! 😆

If you had the choice would you buy this same Ricoma again?

Tajima calibrates your machine on site before you use it.

What’s the name of the part

Although it must be frustrating for you; however, I have learned so much from your mishaps. Thank you for sharing. I believe the best tip regarding the needle placement is by using another needle within the eye of the replacement needle was really helpful. I am happy you were able to get your machine in good working shape.

@brittanybriggs3806

Жыл бұрын

Of course just trying to help others who run across the same issues as me because learning on your own is so hard. 🤪

Buy a digital TOWA tension tool. It will change the game. I held off for a year, don't make my mistake lol.

@brittanybriggs3806

2 ай бұрын

Is that a Digital Bobbin Case Tension Gauge?

How did you get business.

@brittanybriggs3806

3 ай бұрын

??

I have trouble with my ricoma 1502 , and I don’t have any tech close, and I call some local technicians for other brands and when I tell I have a Ricoma they even call back! Is the worst investment ever, but I’m buying a Tajima but a very expensive learning with this machine

@brittanybriggs3806

10 ай бұрын

Yea they only have techs coming out of Miami and I had to pay a pretty penny to fly one out to me to have the machine fixed, which is BT. After purchasing such an expensive machine you would think they would send a tech to help setup because personally I think things get shift around from transportation.

@cl4522

10 ай бұрын

@@brittanybriggs3806 my machine was months old and they have to chance almost everything, and was COVID time so my machine was no able to use it and paying every single month until they were able to get there! But this guy are marketing genius so lesson learned

I'n in central Florida and looking to purchase one of these, I would pay you for you time if I could come watch you do a couple hats before I make my purchase of a 1501

Thanx fr technical issue info, by the way u r so cute+beauty

I'm in Titusville 😊 When you are ready for an American machine with a real warranty with no hidden fees and me as your technician, let me know!

So they sent you a faulty machine and made you pay for someone to go tell you that you have a faulty machine yikes

@brittanybriggs3806

Жыл бұрын

Sometimes issues can arise but good news it' starting to work better after the rep came out.

Thank you for a useful video. I think it's disgusting that you are a new customer buying an expensive machine, then charging you for their expenses. I have learnt one thing, NOT to buy a Ricoma machine, as I am currently looking. Their after sales service is shocking! What ever happened to looking after their customers?

@ingeneren

Жыл бұрын

Watch Pamela reed of sterling styles. She has had nothing but problems with a brand new Melco a year ago. Plus she couldn't get anyone to return her calls or help her out months later. It still isn't working.

@deadmerchantco

Жыл бұрын

This has 100% been my experience as well. Our Ricoma 1502 has run into every bad situation possible and I can't get ahold of anyone by phone and they don't call back for days. Funny enough, if you call their sales department they pick up within 1-2 rings, but any customer service after you purchase is a complete joke. Pretty sure we were sent a lemon and this video makes it sound like we have to pay for a rep to come look at it and tell us what we already know.

@KOK-sc8ez

5 ай бұрын

@@deadmerchantcodid you ever get help for your machine? We were considering this company but this isn’t the first set of stories like this I’ve seen. Is there no recourse with the financing company (if applicable) for receiving an unusable machine?

You need to realize you paid a lot for a Chinese boat anchor.

ricoma is horrible, for anyone reading get a different machine if you're thinking of getting ricoma, there are better ones out there for the same price

@brittanybriggs3806

Жыл бұрын

What is another machine you would recommend?

@norcalembroidery1626

Жыл бұрын

Sell it and get a Barudan. Ask ricoma how they feel there machine compared to a Barudan.

Please talk to a lawyer, if you smard

Those are junk Chinese machines, go Japan or Germany for embroidery machines. Go NZK or Tajima embroidery machine.