The MHA. Let’s talk about why it’s good and how to not install it wrong. Def check this out if you have an MHA and a Bison Belt!
Жүктеу.....
Пікірлер: 33
@erikfribrock46277 ай бұрын
Looking to pick up a bison and MHA so this was some great advice!
@thee_kit_kid Жыл бұрын
Tek lock idea is genius. First time I’ve seen it configured that way
@FerroConcepts
Жыл бұрын
It's really helpful!
@settigrmx
Жыл бұрын
@@FerroConceptswhat hardware do you use to adapt the TekLok to the MHA? The Chicago screw posts are too large to fit through the MHA.
@FerroConcepts
Жыл бұрын
@@settigrmx I used the included hardware.
@2A.Freedom10 ай бұрын
I love the MHA. Clamps down on my belt good. But.... Couple critiques. First is that the holes don't exactly line up with the QLS and be able to rotate easily. You have to really force it in and torque down the screws really hard to get a negative cant. Second is it could be just a little longer. The lowest position is almost mid ride. And lastly, the leg strap adapter doesn't exacly fit well if the QLS is the lowest position. Overall i love it, but it definitely could do with some modifications.
@JosephErik83 Жыл бұрын
I keep going back and fourth between this or the safariland thigh rig model 6004. I like the fact that the safariland appears to be more secured by using the belt loop, and it won’t budge left or right, but I haven’t used either so I can’t say for certain.
@FerroConcepts
Жыл бұрын
The MHA does not budge left or right. The struts are very tight.
@oceres6 ай бұрын
Aaaaaaand I just finished putting them on the mole and was all proud of myself.
@FerroConcepts
5 ай бұрын
Ha, but now you know!
@Darkness_Actual Жыл бұрын
I'm assuming when he says to run the struts over the entire belt is specific to the Bison belt. I only say that because the video from True North says to run them through the molle. That's how I plan to run mine on my Odin Mk3.
@FerroConcepts
Жыл бұрын
In our opinion the purpose is to mitigate any slop from your holster system. Webbing inherently adds slop to the system.
@2A.Freedom
10 ай бұрын
It's any belt. Especially for the newer laser cut molle. I ran it in the molle on my belt for 3 months and ended up going over the whole belt. Much more stable.
@spookinoff Жыл бұрын
Will using the Tek Lock lower the ride height? I have my MHA mounted with the struts, and even on the lowest setting, it's still too high for me
@FerroConcepts
Жыл бұрын
It will not change the height.
@spookinoff
Жыл бұрын
Oh well. Thanks for video and reply.
@GYI5U11 ай бұрын
Does this adapter make it very uncomfortable to sit or to take a knee? Feels like it would twist your belt badly.
@forge_concepts
10 ай бұрын
It doesn't. I've run it for several years now including on a ton of VIC movements without any comfort issues.
@BigBadBossMcCoss4 ай бұрын
Is this universal or will it only work with safariland holsters?
@FerroConcepts
4 ай бұрын
True North makes adapters for other brands!
@ericpayne9237 Жыл бұрын
Just got my first one today n have no clue about them
@TheOriginalGunNut Жыл бұрын
Cuts into my leg on long patrols and is very uncomfortable when sitting or bending over.
@dukewebb706
Жыл бұрын
I had that feeling. I''ll just stick to my Safariland ALS. Outside of low vis I've always been issued a drop leg.
@richie.6658
Жыл бұрын
dang i thought that would help fix it, my mid ride digs into my hip/leg
@bitterfrick5071
Жыл бұрын
qore makes a pad that sticks on the back to remedy that issue.
@richie.6658
Жыл бұрын
@@bitterfrick5071 never knew, thanks alot
@lithium1770
11 ай бұрын
get a pad
@catalystactual6491 Жыл бұрын
My ass had it on the molle -_-
@FerroConcepts
Жыл бұрын
Haha, no worries. Many do it. Works better over the entire belt.
@DouglasSpende-xm5kf Жыл бұрын
What does Rad mean in English is it 2023 or 1960s again?!
@worstcasescenarioch Жыл бұрын
Meh. Putting it over the belt like that will make those two metal bars dig into you. Uncomfortable. Besides it takes some velcro engagement (although minimal) between inner and outer belt. Yeah i'm aware of velcro strips. Not convinced, sounds like Ferro is just trying to avoid having people damage their Bison belt, which is understandable and legitimate, but still, i would rather get a belt with stiffer molle and put those bars through it.
@FerroConcepts
Жыл бұрын
I'd grab a Tek-Lok. Pretty much solves all of those problems.
Пікірлер: 33
Looking to pick up a bison and MHA so this was some great advice!
Tek lock idea is genius. First time I’ve seen it configured that way
@FerroConcepts
Жыл бұрын
It's really helpful!
@settigrmx
Жыл бұрын
@@FerroConceptswhat hardware do you use to adapt the TekLok to the MHA? The Chicago screw posts are too large to fit through the MHA.
@FerroConcepts
Жыл бұрын
@@settigrmx I used the included hardware.
I love the MHA. Clamps down on my belt good. But.... Couple critiques. First is that the holes don't exactly line up with the QLS and be able to rotate easily. You have to really force it in and torque down the screws really hard to get a negative cant. Second is it could be just a little longer. The lowest position is almost mid ride. And lastly, the leg strap adapter doesn't exacly fit well if the QLS is the lowest position. Overall i love it, but it definitely could do with some modifications.
I keep going back and fourth between this or the safariland thigh rig model 6004. I like the fact that the safariland appears to be more secured by using the belt loop, and it won’t budge left or right, but I haven’t used either so I can’t say for certain.
@FerroConcepts
Жыл бұрын
The MHA does not budge left or right. The struts are very tight.
Aaaaaaand I just finished putting them on the mole and was all proud of myself.
@FerroConcepts
5 ай бұрын
Ha, but now you know!
I'm assuming when he says to run the struts over the entire belt is specific to the Bison belt. I only say that because the video from True North says to run them through the molle. That's how I plan to run mine on my Odin Mk3.
@FerroConcepts
Жыл бұрын
In our opinion the purpose is to mitigate any slop from your holster system. Webbing inherently adds slop to the system.
@2A.Freedom
10 ай бұрын
It's any belt. Especially for the newer laser cut molle. I ran it in the molle on my belt for 3 months and ended up going over the whole belt. Much more stable.
Will using the Tek Lock lower the ride height? I have my MHA mounted with the struts, and even on the lowest setting, it's still too high for me
@FerroConcepts
Жыл бұрын
It will not change the height.
@spookinoff
Жыл бұрын
Oh well. Thanks for video and reply.
Does this adapter make it very uncomfortable to sit or to take a knee? Feels like it would twist your belt badly.
@forge_concepts
10 ай бұрын
It doesn't. I've run it for several years now including on a ton of VIC movements without any comfort issues.
Is this universal or will it only work with safariland holsters?
@FerroConcepts
4 ай бұрын
True North makes adapters for other brands!
Just got my first one today n have no clue about them
Cuts into my leg on long patrols and is very uncomfortable when sitting or bending over.
@dukewebb706
Жыл бұрын
I had that feeling. I''ll just stick to my Safariland ALS. Outside of low vis I've always been issued a drop leg.
@richie.6658
Жыл бұрын
dang i thought that would help fix it, my mid ride digs into my hip/leg
@bitterfrick5071
Жыл бұрын
qore makes a pad that sticks on the back to remedy that issue.
@richie.6658
Жыл бұрын
@@bitterfrick5071 never knew, thanks alot
@lithium1770
11 ай бұрын
get a pad
My ass had it on the molle -_-
@FerroConcepts
Жыл бұрын
Haha, no worries. Many do it. Works better over the entire belt.
What does Rad mean in English is it 2023 or 1960s again?!
Meh. Putting it over the belt like that will make those two metal bars dig into you. Uncomfortable. Besides it takes some velcro engagement (although minimal) between inner and outer belt. Yeah i'm aware of velcro strips. Not convinced, sounds like Ferro is just trying to avoid having people damage their Bison belt, which is understandable and legitimate, but still, i would rather get a belt with stiffer molle and put those bars through it.
@FerroConcepts
Жыл бұрын
I'd grab a Tek-Lok. Pretty much solves all of those problems.
𝙥𝙧𝙤𝙢𝙤𝙨𝙢