Adam is how I found this channel. Always enjoy when you two get together.

That scene of OG and LZ reving their cars reminded me of that Breaking Bad episode when Heisemberg and son bought new cars. The new exhaust takes much less space than the factory one. If Adam eventually drifts and damages the rear bumper, over the factory cat, he will have to spend much less to fix it.

I always enjoy watching you guys working together, is like big brother and little brother😁

Every video with Adam it seems like Matts patience is being tested by an adhd son. How’d you get that off? Pulled and prayed. If I break a clip I just zip tie it.

@adaywithdante9623

5 жыл бұрын

I love it! Very much like father son, I think it’s good for both of them.

@dustincercado

3 жыл бұрын

My thoughts, exactly! LOL!

@Meyersmanx1

2 жыл бұрын

Drives me nuts but the team seems to work together so good for them.

Doesn’t get any better! Dundon exhaust all the way!! 💪

OG and LZ videos are the best

I am so close to pulling the trigger on the Catted Dundon system to replace my SW bypass valves disconnected ... the 40 lbs of extra torque at 4500 rpm is worth the $ alone on my GT3 Touring ... thank you for the video

The Tommy fyeah text part was hilarious... I'm sure Tommy must have been like "what the hell is his problem"

@rider147b

5 жыл бұрын

time stamp?

@Gramps83

5 жыл бұрын

@@rider147b 13:45

Bought this set up because of you Matt! Should have mine next week.

Driveway goals at the beginning..!!

4K!!! Time to watch it on the big screen!

Matt, just wanted to let you know I recently ordered the MTM SGS-28 about a month ago and was finally able to use the other day....... wow!!!! Absolute quality!!! I love it!! Can’t believe the quality for the price!!

@ObsessedGarage

5 жыл бұрын

Sweet! Thanks for the support!

@Patrick94GSR

5 жыл бұрын

SubiSkank my sentiments exactly, got mine last year!

Thank you for trying to push down this time on your breaker bar Matt!

I'm so glad you guys are running catalytic converters. Boxer motors don't even notice them and they help the air quality tremendously

Nice job!!!

Awesome video!

You guys are crazy . I just installed a full side delete exhaust (JCR) without removing the bumper or wheels!! Also I used the Factory tips.. I liked the look a lot better.

great video on a very sweet car!

So after 4? years? Matt has finally started using the torque wrench the correct way! JK, great vid as always!

Its a straight pipe yo!!! That had me laughing out loud.

That's a Badass exhaust. Thanks gguys.

I prefer the catless personally. Each to there own. There is no right or wrong at the end of the day! 👍

Lots of fun watching. Got the same set up, including the cats, on my 991.2 GT3. Love em. Quality costs.

@brianhimmelman420

5 жыл бұрын

Scott any issues with OEM steel center muffler? Tks

Nice work.

Check up the ad for new eventuri intake for the porsche 😍

Freakin awesome!

Backstage pass version of Adams video 👌🏽

Just got a 2019 RS. Am interested in this exact exhaust setup. Also watched the Dundon Engineering video, in which OEM restrictions/requirements are discussed. Do you know if this setup will pass annual emission testing?

@ObsessedGarage

4 жыл бұрын

That's a good question. I'm not quite sure about that, but Dundon would know. Shoot them an email.

I see why header and side muffler change, but was it necessary to change center muffler? any additional benefit. stock center muffler is titanium vs dundon S.S. my shop suggest just dundon header and side muffler change and ECU tuning for smooth torque curve.

@ObsessedGarage

4 жыл бұрын

The Titanium center mufflers tend to break rather easily.

38:23 Extensions are fine; it's wobble sockets, UV joints, or anything that will change the angle that will affect the torque. Also, make sure you're operating well within the range of the torque wrench for accuracy.

@Patrick94GSR

5 жыл бұрын

computiNATEor extensions can make the torque wrench click before the actual torque spec is reached, because of twisting combined with play between the extension and socket pieces. I usually dial up a few extra pounds if I have to use an extension.

@computiNATEor

5 жыл бұрын

kzread.info/dash/bejne/poaGm5iCfKq1grg.html

Two beautifully done cars.... mmmmmmm

Excuse me while I just gaze at the bottle arrangements on the shelves 😍

@ObsessedGarage

5 жыл бұрын

I can't wait to have all of the same bottles on the shelf.

@benline375

5 жыл бұрын

@@ObsessedGarage Maybe you can set up a live camera just pointing at the shelves so we can take a look at any point in the day haha

@Patrick94GSR

5 жыл бұрын

Ben's Dodge - Dig It and the air hoses perfectly equidistant each side of the car, and the OG bolt perfectly centered above. 👍👍

Sorry if you have answered before, but what lift is that? Any chance you have done a video on it? Didn’t see one

@James-hh7hp

5 жыл бұрын

TheFundean he has done a few videos on it.

@ObsessedGarage

5 жыл бұрын

It's this one. I love that thing. www.obsessedgarage.com/collections/lifts/products/twin-busch-tw-s3-19-double-scissor-lift

Matt--how bad was the smell with the catless headers? Trying to decide if I go Race or Street.

@ObsessedGarage

4 жыл бұрын

It’s not too bad for you in the car, but followers don’t like it much. The biggest issue is yellowing if they rear deck and bumper.

Matt, what's the deal with the OG labeled products on the bottom shelf next to the all the Rupes machines? Are new products in the works or is that how you package Adam's wheel cleaner, etc. when you buy in bulk?

@ewsickels

5 жыл бұрын

It's his decontamination soap. Been out for a few months on his site.

@canaanbartz882

5 жыл бұрын

@@ewsickels Thanks, Ethan!

Matt, On your lift, do the 4 flaps hanging down lift off at all when car is up in the air? Would be nice if they could be removed and not be in the way. Also, does Porsche not let you spec the muffler. Sad it is always replaced.

@ObsessedGarage

5 жыл бұрын

There is no reason to take it off. I've never noticed them being in the way. It's not easy to remove them.

@sandmangti7040

5 жыл бұрын

Obsessed Garage Thanks. Just looked like times when they come close to heads. I think the manufacturer could make a quick lift removal. Nice video. Enjoyed.

so, is it really same-long 3-3 headers ??? also fit for gt3 ???

@ObsessedGarage

4 жыл бұрын

Yes, this will fit GT3.

Pulled and prayed LOL

Is Dundon better than Sharkwerks or Akrapovic?

@ObsessedGarage

5 жыл бұрын

For this car, yes.

awesome vid :)

Man, I'm sorry you didn't have a good time in Colorado Matt :/

Hate to say it but I would probably take the ten grand and 1 more grand and do a PTS GT3RS. Great install video interesting.

@ObsessedGarage

5 жыл бұрын

It's not quite that easy. Adam didn't get approved for PTS.

@gtperfection1596

5 жыл бұрын

@@ObsessedGarage Easy to understand PTS has a very small window .

How many hours did the install take for you fellas?

@ObsessedGarage

5 жыл бұрын

I say about 8 hours total.

curious as to what you guys ordered from uber eats

@ObsessedGarage

5 жыл бұрын

Ha, ha... I didn't get anything. Adam got Subway.

Looked a little different when Matt took off a wheel to when Adam took one off, beef up LZ 😂

@ObsessedGarage

5 жыл бұрын

Ha, ha... I eat more.

@dbk81

5 жыл бұрын

Hahaha you and me both Matt 😂

What kind of lift is that?

@ObsessedGarage

5 жыл бұрын

This one. www.obsessedgarage.com/collections/lifts/products/twin-busch-tw-s3-19-double-scissor-lift

@Patrick94GSR

5 жыл бұрын

Haha old OG would have posted a manufacturer or amazon link. Now you can post your own store link. That’s how you know you’ve made it! 👍

Grasshopper

I would have gone with BBI.Ive been on all the Porsche forums for 20 years.BBI just does everything better.You may pay more but you also get more quality.

@ObsessedGarage

5 жыл бұрын

BBI doesn't offer a full exhaust.

@kevinkinsler

5 жыл бұрын

@@ObsessedGarage Contact Betim,Yes They Do.Ive been in the Porsche Community 20 years.

Damn Adams making Matt look small haha

@ObsessedGarage

5 жыл бұрын

Ha, ha...

That's like a 14k exhaust setup

Both sound great. But sorry Adam Matts has got a bit more growl..

I am curious what Porsche Quoted Adam for the install.

@ObsessedGarage

5 жыл бұрын

He was joking. He never asked them.

did porsche really quote 30k?

@ObsessedGarage

5 жыл бұрын

Ha, ha... No, that was a joke.

@saleenr6

5 жыл бұрын

hahaha hard to tell...@@ObsessedGarage

I'm going to have to come back when it's done rendering past 360p..

@ericsanchez7388

5 жыл бұрын

break a leg im already half way thru passing you nearly a total of a zillion seconds of ur life. hAHA

@BryceandKyle

5 жыл бұрын

1080p is now available

When a random Asian kid shows up in your warehouse, it's officially a sweat shop 😂😂😂

That's why I do not have a Porsche, way to many steps just for a new exhaust 😆

Yes the German torque spec is goodintight Adam 😆 How funny my O2 sensor screw into the cats too on my flat six Subaru

@Patrick94GSR

5 жыл бұрын

Timboslice and Italian torque spec is ugga-duggas.🤣🤣

You guys crack me up!! Would love to be helping ya guys out for the free entertainment 😀. 👍🏻👍🏻

No extensions with a torque wrench is bullshit, ask any real mechanic, it makes no difference.

So that ex system is 10 grand 😵

@ObsessedGarage

5 жыл бұрын

Yep

@bmwsincekid

5 жыл бұрын

Obsessed Garage thats Crazy You can a Half m3 e92

@bmwsincekid

5 жыл бұрын

Obsessed Garage but dont take i bad Does it worth that much money for an exhaust the sound it that better?

I take it you guys didn't google how to do this beforehand

@Patrick94GSR

5 жыл бұрын

pjfan173 why would they need to, Matt’s done it 16 times already before this one!

Sorry Matt, the catted version sounds better.

@jamessellers5160

5 жыл бұрын

Definitely

@ObsessedGarage

5 жыл бұрын

The catted looses the rasp. I want that.

@OG Dundon Motorsports basically steals other peoples work and brands it their own.All of their engines 4.0,4.2,4.2R are actully Neil Harveys work at Performance Developments.This goes for all of their products.Its Not Their Work.

👍👍

5 ads?? Pita.

@ObsessedGarage

5 жыл бұрын

KZread Red will solve that. It’s $10.

@Patrick94GSR

5 жыл бұрын

Artagain I don’t get ads when I watch on my TV through a Sony BRD player.

When you don’t know if it’s a 2018 or 2019, fml 🤦🏼‍♂️

360p? Booooooo