My jig arrived to Dallas, TX ten days after placing an order. The quality of the jig is superb. Craftsmanship is outstanding. Put it to a test sharpening my chef knife and the results knocked my socks off. There is no way I could have achieved the same results sharpening by hand . Great tool and thank you Mr. Kadlec.

@krosiamakrosiama8483

3 жыл бұрын

U

@user-cx3jc4fp5c

3 жыл бұрын

Ф

@hvwj86

3 жыл бұрын

I’m skeptic. How much was it?

zatím nejlepší tip na vlastní výrobu, perfektní provedení, motivoval jste mě

Great - I especially loved the cup of coffee bit!

You have created quite a nice sharpening jig. I'm impressed. Thank you for showing us how you created it.

It's a large version of the Lansky sharpener, very nice work.

Got my sharpening jig roughly 2 weeks after purchasing and now use it since a few weeks and I'm happy that I bought it. Thanks Michal for this great tool and the fast delivery

@make_it

6 жыл бұрын

You are welcome my friend, thank you!

I'm totally impressed!

I made something similar for my use about 35 years ago.. but you have made something that made me go... oh heck! why didn't I think of that way!.. well done my friend.. well done indeed

@make_it

6 жыл бұрын

+tinkmarshino thank you very much.

I am amazed you still have all your fingers!

jig delivered today and straight tryed ...never had such a sharpest knife as now.5 Stars .well done dear Michal.

@agcrawford

6 жыл бұрын

Mario Menardi bbb

Got it as a Christmas gift for my mum. Works super well, especially with larger knifes one achieves incredibly precise results. I recommend to start with a stretched bar and work with the stone towards the knife as you move along the edge. So basically push the stone in the direction of the knife. It is also shown in the video. This prevents the stone from being damaged by the plade as there's more control when the tip of the blade is reached. Also it is necessary to check and readjust the angle after the first stroke. Begin with a slightly larger angle then after the first stroke have a very close look at the blade and lower the angle. Repeat until it is perfect.

@sheilaharrison6590

6 жыл бұрын

Johannes Schmitz m

@agcrawford

6 жыл бұрын

Sheila Harrison ¡

I will be in touch, looks awesome!

Got the jig delivered to Australia with no problems. Fantastic product and waaaay better than some of the more expensive sharpening jigs i have bought. I especially like the fact that you can use full size sharpening stones (just make sure you use similar thickness stones tho). Gives you fantastic razor sharp knives.

@vladonweb1

6 жыл бұрын

Muscle Tone Just asking, how much did you pay for jug with shipping to Australia? Thanks.

@0zhiph0p

5 жыл бұрын

Yer same. Price plus shipping to aus

The magic box is great! :-)

@make_it

6 жыл бұрын

+Capitano Americo yes, very useful.

Хороший станочек. Талантливый человек, талантлив во всем. Лайк! 👍

Excellent system well done 10/10👍🏻

Just got it today! Amazing job Michal!

@make_it

6 жыл бұрын

+Valentin Zuchuat thank you Valentin, nice to know that the jig came to you. Wish you all your knives become super sharp.

Najlepszy ze wszystkich pomysłów.

¡¡BRAVO!! FÁCIL Y SIMPLE, MUY BIEN AMIGO.

Beautiful job Michael you make such wonderful products.

@make_it

6 жыл бұрын

+Opa's Workshop thank you my friend, its nice to hear from you.

excellent job making this jig.

¡¡BRAVO!! FÁCIL Y SIMPLE.

Amazing tool, nice looking to. Well done.....

Hola me gusto mucho tu video saludos cordiales. Daniel

Супер Точилка!!! Браво!

EXCELLENT JOB!!!!

amazing . well done!

Отличная работа,аккуратно всё!,молодец.👍

That’s impressive, well done, excellent,

The thing I really like about this jig is that it uses stones instead of sandpaper …👌

Super sehr gute Arbeit!!!

Just got mine today. Wife’s making me use it for her scissors first before I can use it on my stuff. Looks beautiful, very smooth action love it.

@kapulu6259

6 жыл бұрын

Totally worth the wait. I think Christmas and the fact that I’m on the other side of the earth was the factors in the wait.

@make_it

6 жыл бұрын

Hi thank you for your information, there was also many customers before the Christmas, so many shipments was little delayed.

Muy buen vídeo. Gracias y un saludo

It doesn't get any better than this.

I love this vid awesome no one better than

Thank-You for sharing,very nice detailed video! you did`nt spend 20mins telling us, how you got started!

excelente trabajo,te felicito

So satisfying

Молодец! Браво!

Dear Michael Thank you very much for yours videos. Please if its possible, show us your workstation and yours machines in a next video. I´m amanzing for the quality of yours devices.

the guy sells the jig yet never tells you how much it is or where to get it. incredible.

Stone holder if it fails, Stone might be broken.. " But Big Thumbs Up" love your project. Great build Sir

A great vidoe Mr. Kalec, I might purchase a few of them in the future for my shop! :)

@make_it

6 жыл бұрын

+Psylent Fox well, let me than know through my email.

Really good job

Quiero uno 👍. Muy buen trabajo

this thing is so satisfying

Не ну огонь, весь сточенный металл на пол летит. Ух молодца.

Muy buen vídeo!

great job my friend.....i keep an eye on you.....there is evrytime something interesting on your channel.....keep doing like that man....greating from italy

@make_it

6 жыл бұрын

Tommy thank you. My greetings to Italy my friend.

Nice craftsmanship and beautiful design. I was looking for something like this because I still want to use my old stones. Do you think the stone holder would lose stability if one would build a frame for the stone which would hold the stone on the sides? So that you could just flip the stoneholder around instead of removing the stone and reattaching it for using the other side?

Hi Michal, congratulations to a fantastic Product. May I as what is the smallest angle you can adjust on your jig ? Also, which dimensions (length) of the stone fits to your jig ? Best regards from Sweden.

O aparelho está muito bem feito e o Sr deve ter mesmo muita confiança pois arriscou colocar o dedo bem à frente do formão (?). Com a quantidade de ferramentas que possui, mal parecia que fizesse má figura.

Hi Mate. I have sent you an e-mail. Awesome work !!

Ist's a *great* piece of workmanship Michal !👌 If You're willing to listen to my advice: If You slit the holes of the "jizzle-like"clamp- that fixates the blade/knife to the wodden block ist's easier to fixate broader blades. It would also be nice if You grind a square 40x20x10mm deep into the wodden block to hold the blade with an N52 neodym magnet the same size. The advance of the more narrow whetstones, which originally came with Apex are just about 20mm wide, so You're able to sharpen koncave internal rounded blades like karambits or hand-scissels. Also is a smaller wooden stone-holder-block lighter and easier to move with less weight esp. on curved knive tips =>less pressure to the edge and tip of the blade. The quality of Your product is *way better* than the Chinese or even Lansky ones 👌👍🙋 I'd *love* if You're improving Your product to *all sizes* => width => of whetstones 20 - 100mm=> needs to slim the wooden stone-holder-block to 25mm and a carved in 60° phase into the middle of the steel stone-brackets .😉

Hi michal, very nice product. Can you advise the height from the from the jig when all is mounted? Thanks

Have used your jig for several years. It's really good. I fall down on the sharpening technique - like Which stone will give me a burr? How much to use every stone? How many stones in a sharpening set? What's the angle for sharpening scissors?

Hi my friend, how can I make one of those magic, coffee making boxes??? But seriously I love this video, great production quality as well as very informative. Please let me know if you ever decided to sell one of those jigs, I would love to have one and there is no way I can make one. Thank u and keep it up

I recommed a linear bearing on the shaft to reduce friction

Nice!

Good Job Dude! This Tool rocks every Knife.... ✌️

Dobrý den, systém Jig II je i k prodeji? Pokud ano, kolik tento systém vyjde a kde lze objednat. Děkuji za odpověď

You get my respect - VYBORNE JE TO. It is much over my ambition. greetings :)

The price is EUR135 for the jig, it is delivered with the 1000/3000 stone. The rocommend combination: Knife sharpener - 135 2000/5000 stone - 50 Leather block with paste - 23 -------------------------------------------- Total EUR EUR 208 plus shipping cost (Europe EUR - 20, USA, CAN, ASIA, AUSTARALIA, Malaysia ... EUR 65)

@The_Joker_

6 жыл бұрын

Michal Kadlec Where can I buy one?

@tonyserafim9237

6 жыл бұрын

I’d like one. How do I buy one from you? I’m in Toronto.

@MsBode123

6 жыл бұрын

I would like to buy one of your sharpeners with stones how can I email you

@MsBode123

6 жыл бұрын

Michal Kadlec I would like to purchase one of your sharpeners with the stones how can I contact you directly

@make_it

6 жыл бұрын

MsBode123 you can writee e-mail kadlk@seznam.cz

I am very interested in this jig! Do you ship to the U.S. and how much does it cost? Also, what does the jig come with? Excellent video!

Super!!!!!!!!!!!!!!!!!!!!!!

good job

Hi mate, what is the smallest angle that can sharpen?

So i only need $2,000 worth of equipment to sharpen my $20 knife... doh ! I am kidding... enjoyed every minute of it.

@make_it

6 жыл бұрын

More than $2000 - :-D

@steann1

6 жыл бұрын

Michal Kadlec .. i am jealous.. but love it.

Well hella bells I'd rather pay you than some wicked edge big company... look like I'll be getting a early Christmas present lol thank you sir

Great!

Good. Ty.

Hola amigo buen trabajo.q medidas tiene el afilador q fabricaste.saludos man.

What kind of oil do you use for the leather strop? Great job. Thanks

Do you sale the build plans? Nice job ,earlier I got bugged from pointless noise but like your finish Thanks and thumbs up

Your work is very beautiful, professional and professional, but can I ask you for a request? I want the name of the application that I use on your mobile phone in the size of the semicircle to determine the required degree. Thank you

Co tak ještě vylepšit držák kamenů pružinou? A nebo i držák nože? Dát pružinu tesně před část co drží nůž, aby bylo snadnější upevnění nože? Pokud bys toto vylepšení použil, klidně bych se přihlásil o využití prototypu č.3.😉👍🏻

Very cool design. How much for just the jig? I already have the stones that I need.

@make_it

6 жыл бұрын

EUR 110 plus shipping

جميل جدا سلمت يداك

Wow... 😮👍

My biggest problem with this setup is the constant impression that the stone may not be attached firm enough, then seeing it falling and breaking in 100 pieces. Otherwise it's awesome to not depend on expensive specific size stones anymore.

Hi Michal! great videos and great handywork! Will the jig work to sharpen a 10 to 12 inches long knives? And if you ship to Puerto Rico?

@make_it

6 жыл бұрын

+Francisco J Rodriguez yes you can sharpen that size knives. I can send it to you, just send me email kadlk@seznam.cz

Great video and your jig looks fabulous. I have a nice sharpening system now, but nothing quite like this. One day I hope to purchase one from you.

Hi Michal, I'm living in France and would like to order your knife sharpener with two waterstones and leather block with paste.Please, can you tell me what is the brand (and model) of waterstones and leather paste sold with the jig ? Thanks !

Hi Michal, Nice magic coffe maker and zinc box :-) How did you assembly the steel rod with wood part on jig holder ? Greetings from Poland :-)!

@make_it

6 жыл бұрын

+Bartek W hi, thank you. The stainless steel rod is glued with the special glue. Thank you and my greetings to Poland!

@bartekw6166

6 жыл бұрын

Thx Michal ! As I see U have a lot of nice professional machines ... if u don't mind - what is the model of your drill stand ? looks very stable ... I'm DIY passionate and i complete my workshop and drill stand is the next purchase ... :-)

@make_it

6 жыл бұрын

I'm sorry but I don't want to recommend that machine for the precission work, It is quite a good for woodworking, but not for metalworking. I'm sure it comes from China, the selling pricee was abour USD 500. Anyway I use it, but I'm sure I will get the stronger one for metalworking.

@make_it

6 жыл бұрын

Please send me an e-mail, I will send you link for the dril press I have.

Very good job Michal, can you send me information on how to order one of this?

Bonjour. J'adore ton système d'affutage, simple, le seul coût ce sont les pierres japonaise sont son extra, mais j'ai pas bien compris la texture rougeâtre que tu as mis sur la pierre ? Merci Bye

@cyranozimmermann3118

4 жыл бұрын

nicolas M il n'a pas sur ses pierres, mais sur son cuire. Il a accroché un bout de cuire a une pièce de bois et la pâte rouge qu'il met est de la pâte à polire, c'est pour bien finir et avoir un tranchant rasoir

aku maximalnu dlzku noza je mozne nabrusit bez toho aby sa noz musel presuvat ? a co ohybne noze na ryby? mozte vyrobit siroku zakladnu aby sa noz neohybal pod tlakom brusenia?

@make_it

6 жыл бұрын

Díky dlouhému ramenu se dají brousit nože délky okolo 300 mm bez přestavování, Vodící tyč s držákem kamene je dlouhá 70 cm! Co se týká filetovacích nožů, tak bych Vám mohl spíše udělat pod nůž podložku, jenž by se upínala společně s nožem a zamezila by tak jeho prohýbání. Kdyžtak mi písněte na kadlk@seznam.cz a domluvíme se.

what oil did you put on the leather block and what's that white paste?

@make_it

6 жыл бұрын

Hydraulic oil

love it hahaha

what's the best angle to sharpening the knife?

Would love to buy but I don't have a facebook account (and don't want one) so how to get one, that's the question.

HI there, How can I order a knife-sharpening jig? What is the cost and does it come with the stones, or leather block? Thank you for your reply!

@make_it

5 жыл бұрын

The best way to e-mail me at kadlk@seznam.cz so I can send you the pricelist, or visit j&o knife sharpener facebook page where you find all informations.

Hola, saludos desde Argentina, muy bueno el dispositivo que hiciste, deseo hacer uno igual, pero yo usaría lijas de distintos granos, que es mas económico que las piedras, podrás pasarme un croquis con distintas medidas del dispositivo ?? muchas gracias

1:05 It is so dangerous to push the wood all the way through the table saw with his hands. If the wood kicks, he's losing some digits!

where can I order this from?

Very nice! How much does it cost?

Verry nice jig. But what is the price in Euro or Dollars

Michael I want to buy one! Tell me how much in American dollars $ and how and when can I??

Very Nice. I world live to but One of your super tool. How much It cost ? thanks

Nice job, how much this sharpner??