Awesome vid! I just got a modbo 4.0 install from a customer and I haven't done a ps2 in like 15 years so this is a good refresher, such a pain compared to other mods.

Watching this with the megaman soundtracks and actually giving it a try wasnt bad it came out good and worked for me thanks!

This is what separates the men from the boys. It’s one thing to slap an Aladdin in an OG Xbox, it’s another thing altogether to install a modchip like this. Really nice work man, great tips and suggestions soldering and routing those wires. One day I might attempt hard modding a PS2. One day…

@MichaelM28

Жыл бұрын

Yay more PS2 videos 🎉🎉🎉

@ModzvilleUSA

Жыл бұрын

Thanks brotha! Would love to see you give one of these a go :D The install process is only really this gnarly on the 79k and 90k slims. The earlier revisions have much easier points to solder to but either way I'm sure you'll be just fine.

@supadud3

Ай бұрын

I am not confident in trying my hand at that sadly my ps2 is 9000x so i hope to find it offered on etsy

This is strangely relaxing to watch. Love it

This was pleasurable to watch 😎🥂

Been a while since I seen your skills,.glad you're still fighting the cause. Greetings from the UK dude👍

Beautiful work as always man

Solder from the top is a total nightmare 😂😂 I do just when it’s mandatory, like on psx desr, but after have seen you video I maybe do my next install video this way 😊

I've always loved installing chips in the fat models. Doing it in these later, slim models can get so frustrating, but it feels so good when the shit works after you're done.

Great looking install. I still miss those days sometimes..

me encanto tu video modzville ❤❤❤❤❤

I just barely managed a Modbo 5 install last month...and now you drop this on me? YOU'RE KILLING ME, DUDE!

@RadioMartyT1B

Жыл бұрын

BTW, your chat with Mr. Mario was seismically EPIC.

Dont have a ps2 , dnt have any idea whats going on still find this fuckin awesome work man

i see your trying to step up your game.

What are the equipment you use to record these vids and soldering man?

As Always fantastic video. But with freemcboot and mechapwn you can do pretty much everything without touch with your bare hands the point of your hot soldering iron!

@ModzvilleUSA

Жыл бұрын

I’m aware of mechapwn and fmcb. I’ll have do a video on that as I hear this all the time. Tldr modchip has more features

@Gusse

Жыл бұрын

@@ModzvilleUSA on pal console I think modchip still is the way to launch ps1 game, no ? And fmcb need to patch your burned game or I have miss something ?

@nerone1984

Жыл бұрын

@@Gusse i've used mechapwn on my stock PAL ps2 slim 70k (italian console). I now can boot all region ps1 backup and original ps1 games pretty much out of the box. PS2 games from a different region don't Need a patch anymore, but different regions Need to be booted via elflauncher. But as modzville says, with that modchip you have more feature.

@Gusse

Жыл бұрын

@@nerone1984 ok thank you ! So I have to test again ! thank you

Cool video. Would be cool a full, complete and comprehensive tutorial for the 70xxxx model to install internal HDD or microSD. Yeh internal ps2 mx4sio is doable but has it's own limit with OPL. Would you think about making it? Thanks

@ModzvilleUSA

Жыл бұрын

That’s literally coming up soon

@Mbarez94

Жыл бұрын

@@ModzvilleUSA No way! Nice, i have a working (even optical drive works) 70xxx laying around waiting for me to install an HDD :-).

Are you making any more of these mod chips? I see they are sold out

Great job, but whats with this 9000x Slim worth salvaging ? I mean in general not reg your Video. Was it better then the older Models ?

@ModzvilleUSA

Жыл бұрын

Internal psu is the big one. Laser tends to be super beefy as well

What sized wire are you using I have a hell of a mess in my ps2 with the 30 awg wire also glue I used super glue but doesn't dry fast enough

Do you have any idea whats wrong with my PS2 Slim SCPH-90006? It doesn't read PS1 games. I already bought a new laser and tweak the potentiometer to the exact reading, but it still doesn't read my PS1 games 🥲 I hope you can help me 😢 i dont know what to do know 😭😭😭

can you make a beginner guide how to hack the switch or what is needed? my SD card died on me and I was still on SXOS. I know I need atmos but I have no idea how to get anything started. I was using EmuNand. Is there ANY purpose on staying on a super old firmware with SysNand or just update to latest firmware as well?

Totally unrelated, but I need to know lol. The Pound XBox HD Link cable uses Component video. Their PS2 version uses RGB, Could you make a Frankenstein Pound HD Link cable and see if it gets better video then their actual PS2 cable. You could use the XBox version and wire a Playstation connector to it. I think you could also build a Wii version this way since they don't sell one.

@ModzvilleUSA, what happened to your in-depth PS2 video? where you show how to add an internal HDD and play PS2 and PS1 games...it was a very long video, did you take it down?

@ModzvilleUSA

Жыл бұрын

It's right here kzread.info/dash/bejne/fYuMpdSLdrS5iqw.html

I got a old matrix chip in my 50004 with 1.3 installed. is there a way to update or should I live it as is as it works perfectly boots everything fine even ps1 with bootlogo :)

I broke like 6 ps2s at my first trys. It Was the Best practice ever. I can solder every little shit possible now. Greetings from germany

Shout out for zombies ate my neighbors

I was wondering if you could you do mechapwn without soldering the sx points to play ps1 backups with a modbo 5.0?

@ModzvilleUSA

Жыл бұрын

Yea actually! If you flash mechapwn (don’t use force unlock) then you won’t notice a difference with or without the SX wire. Mechapwn is better at handling PS1 then any modchip so I personally recommend holding start to disable the modchip when booting ps1 games.

@aizatharis

Жыл бұрын

@@ModzvilleUSA awesome man, thank you for the quick reply!! I’m planning on doing a modbo mod chip with my ps2 90000 series this weekend and your timing with this video couldn’t be more perfect! Thank you so much!!

I could cry. I'm trying to repair a ps2 portable console that has the RST line for the power switch disconnected, and I don't know where it connects to. I've watched so many modchip installs to find the RST location, but this is the only one where the board is the same as mine gh-070-42 9XXXX, but you skipped the RST connection 😭 you couldnt give me a pointer as to where to look could you? Thank you so much dude, and keep up the great content.

@ModzvilleUSA

Жыл бұрын

Thanks! Here's the diagrams quade.co/ps2-modchip-guide/modbo/

Pretty much have given up on modchips for my ps2 I have a scph 10000..chip I need seems to be gone forever 🤧

Do you mean 9000 series or 90000 ? Because my ps2 says 90004 model number 😅

Modchips are cool, is there any other reason necessary? Cool video.

@ModzvilleUSA

Жыл бұрын

Force Ntsc, native ps2 backup support without patching / ulaunch fuckery. Toggle dvd Region, boot directly to elf file.

@jm3493

Жыл бұрын

Yeah I figured that stuff, but at the end of the day if someone wants to do it, let em. Who cares it's your console do whatever.

Que tipo de cable usas

Link me to dat blue wire bro

Hello

I tried the matrix 1.93 version of the 2.0 once and it blew the bios on the ps2 How that model chip works bud??

@ModzvilleUSA

Жыл бұрын

I’ve heard tale of that. Never had an issue with matrix 1.99s or 2.0s

@Modzie868

Жыл бұрын

@@ModzvilleUSA I’ll order a few soon. Thanks bud

I don’t really get it why the hustle through all that when you can easily mcboot or fortune

@user-rf3fl2jm6e

Жыл бұрын

Unless there's a new patch (which might be, I don't keep up with them) , you can't mcboot on a 9000 without a modchip Plus from my experience, growing up with a 9000, modchip were the most reliable way to play games on it

@ModzvilleUSA

Жыл бұрын

Because I can and you can do the same things plus more with a modchip.

@MichaelM28

Жыл бұрын

@@user-rf3fl2jm6e some early 90000 models are compatible with freemcboot

@ModzvilleUSA

Жыл бұрын

@@MichaelM28 this is true in my experience its about 50/50

This is painful to see.

@jothain

Жыл бұрын

How come?

@ericsonicboom16

Жыл бұрын

not really its really fun to do if your into these type of stuff then yea it is fun but can be stressful even tho i enjoy doing these type of stuff

@IAGMRevenge

Жыл бұрын

Because the lack of technique.

@jothain

Жыл бұрын

@@IAGMRevenge that wasn't bad at all. Actually better than 99% of stuff I've actually seen.

I wonder if that type of soldering tip would be good to solder to TSOP NAND/NOR memory legs. And I don't know what cable/wire size would be good for it. I need to un-brick one of my PlayStation system. Looks like I need to get myself a NASA microscope, a soldering iron/station and god knows what else. 🥲