I can totally hear this guy saying “ Daisy to the main stage, Daisy to the main stage!”

@gjack2008

3 жыл бұрын

Completely underrated comment. 👍🏻

@justinwilliams9452

3 жыл бұрын

Hell yeah

@johnieirving1241

2 жыл бұрын

Hahaha,yep

@robo3915

2 жыл бұрын

“All right guys, give it up for Raven Storm!”

@tonyromano6220

2 жыл бұрын

Who is Daisy?

I could listen to this guy all day. He's got a great speaking voice!

@gregv8690

4 жыл бұрын

Jon Hammett He wants to sell you a sham-wow

If your gonna buy a mos or have a mos but watching videos before mounting your optics, read this first! Put your optic on the plate first, screw the two little screws and check if they are sitting flush or if they are coming out the bottom. If they are coming out of the bottom of the plate you need to trim them, otherwise it will not sit properly

@blue.cord.actual8698

Жыл бұрын

You happen to know if the gen 4 and gen 5 RMR mounting plates are the same?

man your bids are getting really good, so appreciate how honest you are , thanks

When I want no non sense legitimate Information this is the channel. Thank you

Thanks for taking the time to make this. Very informative and helpful in deciding how to move forward on my first red dot hand gun. If you ever decide to put California in your rear view mirror please set your course for Florida.

I sense extreme positivity on you good Sir. more power to you and your team/family.

I like the option of various adapter plates in case one chooses to go to a different optic as products change and improve.

I have a G40 MOS. Put a (used, for $30.00) Docter RMR on it, it took a little while to adjust it correctly. I also installed a Ghost trigger bar and polished the innards a bit; this improved the trigger greatly, and cost 17 bucks for the trigger bar. Now, with some practice behind me, I can put 5 in the 10 ring at 20 yards. I put 3/5 into a 4 inch fence post at 60 yards yesterday evening. Me like!

LENNY YOUR THE BEST TEACHER WHEN IT COMES TO GLOCKS, ALL HANDS DOWN. I WATCHED ALL YOUR VIDEOS AND I FEEL LIKE IM IN COLLEGE LISTENING TO THE PROFESSOR. THANK YOU FOR YOUR TIME & THE KNOWLEDGE YOU GAVE ME. BEFORE WATCHING YOU I WAS COMPLETELY GLOCK-ILLITERATE. I THINK I HAVE SOME DEGREES NOW. GOD BLESS YOU AND YOUR FAMILY!!!!

@bc_usa

7 жыл бұрын

Troy Stayflyer ..Why are you YELLING!!!??

@JohnDoe-zc5pn

6 жыл бұрын

Troy Stayflyer quit kissing his ugly ass nigga look like a gargoyle

I bought the 34 mos 6 months ago. there are other optics like vortex that copies mounting patterns of other optics. for those that didn't know.

Great helpful video👌

OD Green Glock 23 G4 with Ameriglo Spartan Operator night sights.. Its my favorite firearm I own..

@Josh Shaw is correct. I had my G-19 specially built before the MOS came out, if you do not use that tiny thin little spring plate, the battery will not get proper ground, and the sight will become unreliable, on off, dim... gotta have it.

McGill is a smooth talker, hard to stop watching his videos, almost hypnotic...😆

@RickDeckard2049

7 жыл бұрын

ikr? i have no interest in glocks really or this mos setup but i ended up watching the whole thing lmao

@caseymelick8023

5 жыл бұрын

That was gay.

@mbal4052

4 жыл бұрын

Casey Melick you looking a bum?

"Shield RMS" allows co-witness with standard-ironsights ... perfect solution, I use it on my G34 MOS.

@chsims7032

7 жыл бұрын

marioheigl I'm thinking about getting the Shield RMS, I love how clear the window is on it. Will I still be able to use suppressor sights with it? I know it can mount low enough so you don't need them, but with a threaded barrel and suppressor for my 41 MOS, I need the suppressor sights on there.

Hands down my favorite KZread channel because my first gun is going to be a Glock

Torx wrenches are very common, you can buy good sets in any decent hardware store. My 1990 Chevy Blazer had T-40 Torx screws holding the removable top on.

@dallas5374

3 жыл бұрын

Want a cookie?

Beautiful gun

Torx are available in every hardware store........very common tools.

@tedundercarriage8183

3 жыл бұрын

right?

@bobbernard1545

3 жыл бұрын

I think he’s the only tool in this video.

Great video thank you very much.

Great info

Does it flicker? No sealing plate? 4 extra screws to mount?

I have a Glock 23 with rmr cut slide. I bought a NC star flip red dot sight.What mount should I buy? I bought a universal mount. Hopefully it’ll work but help guys.

what brands of red dot can i put on my glock 17 gen 4 with the adapter set 01 ?

When screws have thread locker, you an take a soldering iron to them before loosening to break the thread locker's cohesion. When you're dealing with tiny screws, or those in aluminum, especially fine threads, it's best to do this because you don't want to rip the threads out breaking it with force.

@TheSeanBampton

3 жыл бұрын

You only need heat if you're using red coloured thread lock. The blue stuff doesn't require heat.

“aNd tHE mEp-tA....... Whatever yeah, however you pronounce that...” - Lenny Magill 😂😂😂

Do you make an MOS Slide that will fit a Gen 3?

Sorry for the dumb question, but does a Gen5 MOS slide fit on a Gen3 frame? I am interested on putting a red dot on my Glock, but I live in CA and can’t get a full Gen5 and do want to keep the firearm OEM.

Does any of the plates that come with mos work with vortex venom

Can I just purchase just that mos slide only and put it onto my glock 19x gen5?

Hi, what is the screw type to fasten the sight onto the mos adapter?

got a custom slide for a gen 2 g21? would love to put a rds on my g21. that weapon and i have been through too much, not willing to replace it, customize it sure, replace it no way in hell.

So mill a modular set up on the slide like glock did and make the plates for all the different dot sites?

I was listening how he was talking about torx screws and that wrench. I though he was also going to tell us about limewire and downloadable mp3's.

I tried to make my own MOS with my 34. Didn't come out quite how I would have liked. Can I buy a replacement slide ... in CA.

I have a 41 mos,, nice shooter.

Do you have any gspc slide for a G27 gen 4?

Thanks for telling us about torque driver and how to use it.

@bc_usa

7 жыл бұрын

Brady Upchurch ..hehe

I have a G23, Gen 4 and want to put a Vortex Venom on it. How do I get that done.

Does any of them fit the vortex red dot?

To get my G23 G4 slide milled for a 502C, you guys do LEO discount?

What's my options if I have the Glock 19 gen3?

Can two glock 17s swap their slides? Like if one 17s slide had the mos. Could it go on the other gun?

Did he use the screws from the original cover plate, or did he use the extra screws that came in the package with the plates??

are you burning the slide with an edm? or do you cut it out on a mill?

so , why not get adaptor kits and when customer asks for cut. cut to accept adaptor plates, there by giving customers options and still being able to provide services

What number Glock plate would be used for the hollison 507k

can I send you my slide and optic to have this done, and how much is it to do this work?

These available for the glock 19 gen 5

Where can I find those screws?

After seeing the guy in this video, the first name to pop into my head was actor J.K. Simmons. This guy looks like J.K. Simmons with much more hair. ^_^

Can I just buy the slide for my g19 gen3?

I have a gen 5 glock 19 mos and I just recently bought the Trijicon HD's and I noticed the rear sights over lap the back of the slide.... does that effect anything?

@douglasphillips24

3 жыл бұрын

No. It's only cosmetic. Very common on MOS guns.

When you take the plate off like that, put a piece of scotch tape over the screws while in the plate. No lost screws.

@cardinalpoints2839

11 ай бұрын

You my friend are a genius in simplicity (which is the best genius)!

Torx fasteners are superior to any other style. Almost impossible to strip out.

@MarkMcDaniel

Жыл бұрын

Agreed. Force distribution and the power of the arch applied with multiplicity cannot be denied.

Any Gen3 mos slides?

So you have to have a plate to fit a site on it. I know Holosun makes a SCS MOS that fits directly to the MOS without a plate.

Where do you get the 4 hole rmr plate

I have read about the glock mos sights coming lose. Is this a problem or did they mouth it incorrectly ?

Cool I like it.

What’s the difference between RMR and DOC ??

do u do the GLOCK19??

I carry a Glock 18 with a 30 round clipizine, in CA. I would like this modification.

@DeFunnyMau5

8 жыл бұрын

R u Leo?

@davidspin581

8 жыл бұрын

FunnyMau5 Nope, not a cop. Just seeing who's paying attention.

@DeFunnyMau5

8 жыл бұрын

+David Spin haha I know where you got clipizine

@minhvisual4265

7 жыл бұрын

I'm still trying to find my bullet button on my AR15 to make it fully automatic.

@andrewbond1186

7 жыл бұрын

just get a fbs gen 3 trigger 699$ basically automatic

Do you have to have the plates ?

Why are some sites listed as non-MOS only?

Anyone have an idea where I could find a g19 gen 5 mos ? I’ve had some difficulty locating one. I will travel if need be.

@johnmartinez1989

4 жыл бұрын

Ask your local gun stores around your area. It's not hard to find.

Does a holoson 507c need a plate?

I saw you at the gun show!!!!!!!!!!!

Can one now buy a MOS Glock in CA? One couldn't a few years ago ...

I want to remove my site and I need a cover for my Glock 19 do you guys sale that

In Europe Torx screws are really common, especialy in central Europe, we don't use Phillips and the others that much nowadays

@RIPPER334

7 жыл бұрын

Martin Schrammel They're not uncommon here... Not sure why he acted as if he'd never seen one before. Maybe a California issue.

Nice, I’d purchase a g19 with the mos ready. Don’t gotta pay another company to cut and punch holes in the slide

Hey old school, reddots are the future and they are on when shooting. I tried one, and I now only look to the future. my glock 19 can take a red dot..

Overkill

I have a g19 gen5 mos. Thought about putting a red dot optic but changed my mind. Just wanna use the night sights but the cut is further back than normal glock. Bought a pair of trijicon hd xr and the rear sight hangs off the gun a bit. Wat sights can i get that dont hang off?

What's the point of having the iron sights stay on when you can't cowitness

It’s slows me down, takes me forever to find the dot.

Hi I'm over the pond in the UK. Manchester to b precise. I'm after a glock 19 gen 4 spring . It's difficult contacting to a sight in the USA from here. Any advice please. No I don't have a WEPON in the UK. My glock is in Asia so I hope that clears the security bit up. Chears

@traymuse3810

5 жыл бұрын

Is Asia a town in the UK?

@Silversurfur01

5 жыл бұрын

@@traymuse3810 is that advice?? Take that KKK CAPE of your head you might read the commint (that's if you can read) and understand what is there mupitt.

Loctite needed?

the 17 mos is next in line...

Hows it going magill's I have a question .. were can i purchase the plate cover for the top slide?? Incase I want to remove my adapter plate

functionally torx and phillips are opposites. Phillips guarantees cam-out if excessive force (torque) is applied to the fastener (screw). Torx guarantees that the driver will NOT disengage from the screw head under high torque. This places more responsibility on the user to tighten the fastener to a target torque, whereas phillips are essentially idiot-proof.

....and now I'm hearing the 'green dot' laser's are more effective than the red's.....seems like any upgrade is obsolete in blink of an eye!

@TexasDog3

4 жыл бұрын

The green lasers are brighter than the red lasers, which means you can see them in bright daylight, the batteries don't last as long in the green lasers, however it's worth it to be able to see the green laser on your target.

Torx is out for more than 20 years. Really common all over the world.

Question one ! Austrian Glock is better than the one made in the USA?

Why the hell are you still in California?

@351WINCHESTER

8 жыл бұрын

It might sink into the Pacific, but I doubt it will float away lol.

@davidspin581

8 жыл бұрын

It's like the Eagles song, Hotel California...

@351WINCHESTER

8 жыл бұрын

"You can check in, but you can never leave".

@TurboMitsubishi

8 жыл бұрын

351WINCHESTER LOL

@amrak-8401

8 жыл бұрын

Because the 2A fight is here in COMMIEFORNIA and if we don't stop them here it will spread like cancer. You may live in a free state now but keep a close eye on your politicians, they are sneaky...

How come when you mil the slide you don’t leave material for the recoil lugs ???? It’s a CNC machine…

I have dealt with the Glock Store on 6 orders. 4 were so messed up it took weeks or even months in one case to get parts they said they had in stock. I was put on hold twice just to be hung up on after a long wait then all lines were busy when I called them back. I think Lenny is a great guy but his customer service and shipping department need to be replaced!

@blastphame

7 жыл бұрын

Birdman Wood Designs did you buy anything?

@easbreid9879

7 жыл бұрын

Steve Oothoudt this guy is an infomercial, sorry but I would never buy anything from him. Him being in Cali is enough for me not to do business with him and sometimes he gives bad info

@JohnDoe-zc5pn

6 жыл бұрын

Steve Oothoudt yea true and I dealt directly with Lenny and it took two fukin months and he's a dick

Why get any other glock other than MOS? Glocks are known for three things, reliability, durability and customization.

@Kh2456

7 жыл бұрын

+Morrius07 Be weary of someone running a RDS on a pistol. Very high probability they're a mall ninja.

@morrius0757

7 жыл бұрын

Kyle Hammer The best kind of Ninja! lol

@karnaag

7 жыл бұрын

Ask me how I know you're stupid.

@rdsii64

7 жыл бұрын

Or they could have an eye issue that won't allow them to focus on the front sight correctly. They could even be cross dominant and a optic makes shooting with both eyes open much simpler.

why doesn't Glock sell the MOS slide separately. you can buy slides from ZEV and others but they cost more than a new gun.

@bestdadbod463

8 жыл бұрын

You can get your slide cut for way less than anything with Zev on it.

@chimneycheck

7 жыл бұрын

Try One Source Tactical

@JohnDoe-zc5pn

6 жыл бұрын

Michael Yeager so FN true they cornered the damn market

Meopta..."me-opt-ah

@texasdeeslinglead2401

8 жыл бұрын

I was thinking he was trying to say meprolite at first

How do you get these in California? I thought they were banned

@leehrvyoswld

8 жыл бұрын

You can exchange currency for goods and services.

@JaguarDieCast

8 жыл бұрын

+Jordan Garcia lol

@TubeSteakTaco

7 жыл бұрын

Brandon Brabaw i own a gen 4 glock in CA. i purchased when single shot exempt. was still in option. You can buy one from LEO.i can only hope to buy just the M.O.S slide now. Seen one on ebay go for $400+

@TubeSteakTaco

7 жыл бұрын

i might of not understood your question, idk how he gets his gen 4 glocks.

no holosun? 😳

Did Lenny retire ?

The screws should be torqued to the value stated by the manufacturer. Don't guess at it,

Your version is preferable. It's sleeker, simpler, less apt to fail.

What he didn't tell you is that non of the screws, the ones that came with the gun and the ones came with the sight, will fit the adopter... I know this because I own one...

@Castleknight

7 жыл бұрын

So, what was the answer regarding the screws?

@king-of-memes6712

7 жыл бұрын

Castleknight Call Vortex, they will send a pair that will fit for you.

@king-of-memes6712

7 жыл бұрын

Castleknight For Trijicon RMR's, you need either buy another adopter that goes between the sight and the Glock adopter or call Trijicon for shorter screws.

I think you need the Trijicon RMR® Mounting Kit for Glock MOS (Trijicon: AC32064) as the screws that come with RMR will not fit properly.

@chriskredlo5198

8 жыл бұрын

100% correct. RMR GLOCK MOS MOUNTING KIT FITS GLOCK MOS SLIDES UPC: 719307613003 MFG MDL #: AC32064

never seen Torx bolts outside of German cars. guess it makes sense though considering Glock is Austrian.