The FERRARI F430's MOST EXPENSIVE ISSUE

Автокөліктер мен көлік құралдары

Hi guys welcome back to Carl's garage!

Пікірлер: 12

  • @jayi836
    @jayi83622 күн бұрын

    Thanks for posting great content!

  • @iFumoffu
    @iFumoffu11 күн бұрын

    great video, very knowledgeable and well presented.

  • @proper_miles
    @proper_miles2 ай бұрын

    The fix doesn’t have to be so expensive. If you get an F430 without cracked headers, IMMEDIATELY REMOVE THE EXHAUST BRACKETS. The center mount is all you need, the additional brackets are actually too tight and what cause stress on the headers, leading them to fail. Should you NEED new headers, get the “top speed” headers. They’re about $1000-$2000 USD. Not bad at all. And it’s a DIY job if you’re handy.

  • @kalibao.official
    @kalibao.official8 ай бұрын

    Thanks for sharing Carl!

  • @lawrence.centinales
    @lawrence.centinales8 ай бұрын

    great to know i really have my eyes on this car in the future one of my dream childhood cars

  • @johnforeman634
    @johnforeman6347 ай бұрын

    I’ve had an 08 F430 Spider for three years now. It has run flawlessly. I did need engine mounts though. They make a huge difference. Anyone looking at one of these should check them. Not expensive if you do it yourself.

  • @jaswingrove
    @jaswingroveАй бұрын

    i can’t recommend the scud relay. had one in my similarly gearboxed R-tronic audi R8 and all it gave me was errors and issues. removed it more than a year ago and have had trouble free gearbox since

  • @Gotadime92
    @Gotadime928 ай бұрын

    Holy shit the intro music 😂

  • @MUSHROOMSOUPBAND
    @MUSHROOMSOUPBAND3 ай бұрын

    120 to 160 in the States now depending on Miles and equipment USD 2.24

  • @KandiMan
    @KandiManАй бұрын

    Why is there so much rust?

  • @bobjones7776
    @bobjones77767 ай бұрын

    I thought saggy exhaust means engine mounts need to be redone?

  • @CarlsGarage1

    @CarlsGarage1

    7 ай бұрын

    well, the bracket on each side of the muffler section are known to fail on 430, also inspect the headers too. I had to replace the headers because the factory one was leaking slowly, and the heat it produced can damage the wires and pumps over times. Also, when the bracket fails, the vibration can also break the tail light clips.

Келесі