I just purchased a mold set from Eras Gone for my .31 cal. 1849 pocket revolver. Excellent mold! I am SO buying this Kerr bullet mold...as soon as im done posting this for my Remington New Army!

Great video and bullet mold. Vaughn Concrete should be thankful. Free advertising from your video.

Mark, my Kerr casts really well. I heat soak the mold on my Lee pot, then cast. No wrinkles, no missing areas. THat is a really good mold. THanks

Mark, What a great bullet. It loads easily into my Confederate Griswold and a Pietta New model Army. Great News It works well in my Ruger Old Army. Been looking for a bullet like this since 1975. Keep up the great work. You people need to buy this guys products and keep him going.

@erasgonehistoricalmolds2400

4 жыл бұрын

Thanks, Hugh!

Really like your channel, always learning new historical facts from your site, thx for the vid.

@erasgonehistoricalmolds2400

4 жыл бұрын

Thanks for the kind words and encouragement!

Just got done convincing my wife to let me buy one of these molds, thanks Mark!!! 03-08-2020: I recieved the mold in a timely manner on Saturday and went straight to prepping the mold and casting which went really well. Today I tested the cast bullets with my Uberti models of the Remington new model army and 1847 colt walker. The results were definitely interesting. You have provided us a truly universal bullet Thank you again.

@erasgonehistoricalmolds2400

4 жыл бұрын

Thanks Benjamin! I'm happy that it works well for you.

Just got my kerr mold to day...molded out about 60 of em...cant wait to try em...thanks a bunch

Just got the mold last week. I will be making paper cartridges this weekend. Looks like it’s going to be a great shooting bullet just like the Dragoon. Thanks for making these available, greatly appreciated.

Thank you for posting

Excellent bullets. In the future I'm going to buy a Remington .44 revolver.

Wow. Very nice. Thanks Mark.

Mark, nice video and a great new addition for shooting in .44 revolvers. Loved the BRO hat.

@erasgonehistoricalmolds2400

4 жыл бұрын

Thanks James. I'm very proud to be a Big Red One alumni. I spent time in the 1/2 Inf Battalion and the 5/16 Inf.

@jlbksinger

4 жыл бұрын

@@erasgonehistoricalmolds2400 1ID Divarty, Bamberg, GE

@erasgonehistoricalmolds2400

4 жыл бұрын

@@jlbksinger "Duty First!"

That’s a great looking bullet!

Thank You for the video!

Really getting me into these older weapons and ammo, I've always wanted a SAA or a S&W Russian/Model 3. I like traditional firearms as well but this kind of firearm is growing on me.

Many thanks for posting this, I thought at first there was a Kerr being reproduced! This looks like a very good bullet to use in the Colt 1860, I look forward to trying this one.

@erasgonehistoricalmolds2400

4 жыл бұрын

I wish someone would reproduce the gun! I suspect it would cost as much as LeMat, however

@453421abcdefg12345

4 жыл бұрын

@@erasgonehistoricalmolds2400 : I suppose in that case I had better set about making one, when I have finished my 4 barrel Lanchester, many thanks for posting these "sensible" videos. Chris B.

awesome

Great!

That’s nice one maybe best yet.

I bought a Johnson & Dowl mold Maybe this would have been better since I could use it in my Walker too. Next order I will.

I’d love a repro of the Kerr revolver

@erasgonehistoricalmolds2400

4 жыл бұрын

You and me both! If it was ever made it would probably be a $1,000 gun, like the LeMat.

@kevinbarnes5200

4 жыл бұрын

Eras Gone Bullet Molds might be worth it

Hello Mr. Hubbs, I own a 2017 era Uberti Colt 1860 Army and am looking to either buy one of your .44 Johnston molds, or this English .44 Kerr mold. I would like to use paper combustible cartridges. I was wondering if you had any experience using combustible cartridges on a Uberti 1860 Army and if so, do the .44 Johnston cartridges typically fit without modification? From what I've gathered the Piettas need work, but I was wondering the Ubertis need to be modified as well? Thanks!

@erasgonehistoricalmolds2400

4 жыл бұрын

Both the Pietta and Uberti will take some work to use paper cartridges, the Pietta much more than the Uberti. If you want to leave your Model 1860 as is, I suggest the .44 Kerr for paper cartridges. You should be able to load those without any modifications. Thanks!

@BurkeSchneider

4 жыл бұрын

@@erasgonehistoricalmolds2400 Thank you for the reply! I'll order a mould as soon as they come back in stock. Keep up the great content, lots of folks really enjoy this.

This may be a silly question as I know you are focused on historic designs. I am wondering what the best bullet to use for home defense in a Taylors and company tommy 1858 new army. My concern is traditional designs over penetrate I want a lead round that will expand and dump energy. Any suggestions ( other than traditional cartridge guns)

@denisdegamon8224

Жыл бұрын

Just try down loading the powder charge a bit. Use a corn meal filler over the reduced powder charge, then seat the ball. If your real careful you can try and put a small mephlat / flat on the nose of the bullet like on a 45 Colt 250 grain bullet.

Wish some of these molds were available. Can’t find the Johnson and Dow mold anywhere

@erasgonehistoricalmolds2400

2 жыл бұрын

They are on order. Keep an eye on my website for updates. I'm the only source for J&D molds

@tonyfino

2 жыл бұрын

@@erasgonehistoricalmolds2400 will do! I’ve been hoping one would pop up on eBay haha.

@tonyfino

2 жыл бұрын

@@erasgonehistoricalmolds2400 ordered that J&D mold. Saw they were In-Stock today! Looking forward to using it!

@tonyfino

2 жыл бұрын

@@erasgonehistoricalmolds2400 finally got to mold some Kerr and J&D bullets today! Now to shoot ‘em!

Who sells the bullets?

You're out! Oh noes! When can we expect restock?

@markhubbs1964

3 жыл бұрын

I'm hoping sometime in December. Keep and eye on my website.

Mark, the link to the Kerr .44 page is broken.

@erasgonehistoricalmolds2400

4 жыл бұрын

Thanks, that was the old URL. I replaced it with the new one.

Are these restocking at some point?

@erasgonehistoricalmolds2400

3 жыл бұрын

Yes, they have been reordered. Hard to guess, but I suspect will have them in March.

Is this mold in stock?

@erasgonehistoricalmolds2400

4 жыл бұрын

Yes, it is in stock as of June 29 2020 with quite a few on hand. The sales page is: www.erasgonebullets.com/store/product/-44-english-kerr-

How do i get this mold

@erasgonehistoricalmolds2400

4 ай бұрын

Go to our main website at. www.erasgonebullets.com. Click on the "Store" button and it will take you to our list of molds. Thanks!

Got a weight on this bullet?

@erasgonehistoricalmolds2400

4 жыл бұрын

224 grains.

@versal339

4 жыл бұрын

Mine dropped out of the mold at about 224 grs.

NAVIES WERE ALL IN 36 CALIBER!!!!

@erasgonehistoricalmolds2400

19 күн бұрын

Yes they were, but now Pietta makes them in .44, authentic or not.

I like the eras bullets quite a bit. There are never any molds for sale. I have been looking for a few years now. The adds should stop if the business has gone out of business.

@erasgonehistoricalmolds2400

2 жыл бұрын

Blue Duck, I'm very much in buisness, just having trouble getting products from my manufacturer. I have .44 Dragoon and .31 Dragoon molds in stock right now, but they are selling fast. Keep an eye on my website for stock updates. www.erasgonebullets.com