I was looking for tips/ ideas. Nooooo ,I found a sales pitch video..thanks eastwood

@jorikarjalainen

2 жыл бұрын

it's a good sales vid though

@wrecknballindustries6989

Жыл бұрын

I mean, other than the 2 I broke these worked great to remove 12 other rusted bolts lol so I'm not upset at this sales pitch

@rhuttrho88

Жыл бұрын

​@jorikarjalainen Why don't you marry the sales vid, why don't cha?

@rhuttrho88

Жыл бұрын

​@@jorikarjalainen😁

Plug weld a nut to the broken bolt. Put a socket on it. Remove it.

Thank you for the conversion!

Will the se work on bolts with head sheared off, like a cylinder stud ?

It's been my experience that these type extractors don't work very well due to the fact that the reason why the bolt broke off in the first place is it was seized in the hole to begin with... it usually requires way more than a simple extraction tool to get out the broken bolt/stud if you're lucky... drilling and a torch come to mind... 😩😩😩 .

@matthewshambler2644

3 жыл бұрын

Agreed, I have had very limited success with the "male style" extractors from various companies.. often they break off in the broken fastener and then you really have a bad day:-(

@dieselsmiths

Жыл бұрын

@@matthewshambler2644Agreed that they don’t work very well. However when they are what will work and they break…that’s user error.

I have that same escort in mint condition😂. Love that car

Question. Has the need to have the tool fit imperial heads caused any compromise in design? I ask because here in England we only work on cars with metric fasteners (unless they are 60+ years old. And that's a specialist thing) Been looking to buy a set of this type of tool to avoid drilling and heat. Assuming you do international postage

@quintauisjones7076

Жыл бұрын

1:48 is 1:48

I used the bolt extractor and it worked fine. Problem now is removing the bolt from the extractor.

@Mrcharles123451

3 ай бұрын

One time use thing, hopefully 😂

@terryschenck6810

10 күн бұрын

You should be able to clamp the extracted bolt into a vice and use your tap handle to unscrew the extractor

It would be great if you could make an affordable bolt induction heat removal tool. Thought you folks had one, but must have been mistaken.

Wow, that first set sure looked a lot like an Irwin kit. Does Eastwood Company have a factory, or do they relabel stuff? Either way those are nice tools.

Thanks!!!

@eastwoodco

2 жыл бұрын

You bet! -JD

Great AD for a tool, but in my experience, that has never successfully worked as advertised.

Eastwood should stick to welders, after all that is the best broken bolt extraction technique of them all. Faster, easier in most cases and more reliable with the option of a “re-try” if first attempt fails…”in most cases”

Start with a rounded bolt, break off the bolt using the rounded bolt extractor sockets. Then go to the male style and break the bit off.. now your really in a jam thinking you should have drilled and re tapped the threads to begin with.

For me the bolt extractor made matters worse as the extractor snapped off inside the bolt....very hard steel to drill out.

@geo745don

Жыл бұрын

use heat first if you can,

@mz7315

5 ай бұрын

You use the included punch to punch out the bolt, just like the video said.

Well we tried to remove control arm on older Honda Civic and broke one bolt inside and rounded the other one so I believe I need this kit

@MiguelAyala550

Жыл бұрын

What did you end up doing to get it out

@jdmchickkustomz9417

Жыл бұрын

@@MiguelAyala550 we had to cut them off and then drill them both out we did not have good drill bits and it took a couple weeks doing it here and there when we had time. I know there are better drill bits and tools that would get that out but we just couldn't afford it

@stevenmckinlay4478

6 ай бұрын

Cobalt drill bits only.....

I'll give the bolt extractor a go on cylinder head bolt. Then straight to the cobalt drill bits, Punch it. Drill it 6mm, then 10mm. 20mm depth. Lift head. Pipe wrench the stud out.

My screw extractor bit broke when I was trying to remove it. Now I have to remove that too! Any suggestions ?

@CatholicCrusader__30

3 ай бұрын

Go to a black smith he'll help. also a tip always apply grease to your bolts it will save your time and money

Also these are very good at what they do. Make sure to get correct specs. Remember hardness equals brittle....... Very strong but...... The bolt he tapped the bolt extractor onto imo was to small, the extractor was more than half way on then tapped with hammer. Use a extractor that just fits, just. And CANNOT BE PUSHED ON MORE THAN HALF WAY. You wanna be hammer that sucker on. And then the instant you turn the socket it will bite in, making less possibility of chewing the bolt head further into a rounded head. Used correctly these work great. Usually the quality is what let's them down but people do still make things that actually they were meant for, doing it very well. Like drill bits. Metal wood masonry? Umpteen types for metal, why! I've bought many drill bits and spent along time realising these are crap! Doing nothing. A it of research and hey presto. For not alot more. And forever lasting and better in every way....... COBALT DRILL BITS. Enuf. Said. Already. 😅😅😅😅😅😅

Great commercial when does the real video start?

Cars in Phoenix don't rust. Thank you

@ua7pyro591

2 жыл бұрын

Idiotic

@king0cans

2 жыл бұрын

@@ua7pyro591 why is that? I have never had a classic rust out in Phoenix. NEVER!

Yeah these don’t work in real world scenarios

What about a stud that has 80lbs of torque on it?

@stevenmckinlay4478

6 ай бұрын

My dilemma right now. I have one head bolt rounded. Torque bolt. So I have my easy outs. My welder, and my drill to hand. Brutal If stripping the mess of an engine isnt enough!!! Afterwards gotta put it all back together, all 7thousand bolts nuts washers. Pipes, wires, plugs......

I just melt off broken bolts

@eastwoodco

2 жыл бұрын

Can't be stuck if it's a liquid.

Wow I was trying to learn how use the screw extractors.....All i got was a sales porch and a description thanksbgor nothing

Why the item could not be shipped

@eastwoodco

6 ай бұрын

It's currently out of stock.

Hello quick question I have a Honda Ridgeline I'm trying to remove the ignition key assembly and on the steering column there are two rounded heads that online they suggest you use a chisel and a hammer to remove them but tapping them backing them out but I wanted to know if your tool would work on them

@eastwoodco

9 ай бұрын

We're not familiar with that specific application - if its threaded the same way as a normal bolt it should work, if they're pressed or something this wouldn't help you.

Will that kit on a broken bolt on a header on the 5.3 v8

@bill-nj6fc

2 жыл бұрын

no thats the only one it wont work on

@Dzejk86

2 жыл бұрын

@@bill-nj6fc yo 💀💀💀

@stevenmckinlay4478

6 ай бұрын

I have rounded bolt on head cylinder 2.0 cdti. 😟

bro come on man u havee not linked the video bro

Weren’t u at American muscle before 😂

thanks for not showing it working

no thanks already bought all these back in the 90's from sears as craftsman which have a lifetime warranty. have only broken 1 screw extractor the 3/8" which seems to be the common size bolt to always break with 5/16" the second worst offender.

You didn't show how to use the dam screw extractor. I waited the whole video for that and you skipped past the whole thing. 🤦‍♂️

Nice how too ? 👎

Lol, just sales. Sorry Eastwood. I won't be buying.

#waste of time

These are junk. Use a left handed drill bit, start small and move up. The every size bit up you go will pull on the bolt more, and removing mass from the center will release more tension from the threads. These quite literally squeeze the bolt and apply more pressure on the threads.

is this an advert was looking for guidance not a sales pitch

@eastwoodco

4 ай бұрын

It's a product video showing you how to complete the task using our tool.

What a waste

Talk too much

wow ... americans can count in millimeters

@stevewheat9030

3 жыл бұрын

We can also add fractions.... can you 😆😆

Bullshit! These things rarely work. Most of the time they just round off the bolt completely.