No video
The Dynon Certified Avionics Panel Upgrade Starts - Episode #09 - Dynon Skyview HDX
The Dynon Certified Avionics Panel Upgrade Starts - Episode #09 - Dynon Skyview HDX
Today in the hangar we pull out all of the old steam gauges to start our Dynon avionics glass panel upgrade. Glen also unboxes the new Dynon HDX system and shows you what we'll be installing to upgrade our Cessna 172B to a full glass cockpit. The Dynon glass panel upgrade is going to take a bit of time and a lot of planning.
Thanks to Dynon for their help with this episode: www.dynoncerti...
#CanucksUnlimited #GlensHanger #flydynon
⚠️ NOTE: These videos are edited for time and entertainment. Editing removes context and can remove safety checklists in the interest of time. Do not use these videos for, or in lieu of flight training.⚠️
Пікірлер: 115
"Rip and tear...until it is done" - DOOM/also Chris
@brewski118sempire
2 жыл бұрын
When the doom music kicks in
......the old gauges....pop them in wood stands. They'll look awesome on the mantel or in the office
"four unknown wires" Just like the 2 extra bolts when I fixed my car 🤪(yes I figured out where they went later)
You're lucky to have a certified guy like Chris there for sure. So many little things have to be done. Looking forward to the next video on this Glen. Thanks for taking us along.
Glen, I discovered your cooking channel a year or so ago and just love your manner of presentation. But as a former commercial airline pilot and OEM Test Pilot, I have become hooked on this rebuild. I think you are doing a fantastic job and I can't wait to see your jet rebuild. I know, I know you don't have a jet.......yet!
Awesome that you were able to partner with Dynon! Can't wait to see how the panel comes out.
Me and my mate are loving this also. Hi Jim if you're scrolling the comments haha
I am so excited for all this glass! I just got checked out in a Cherokee Six with a G3X, G5, and GNS 530 and I feel absolutely spoiled compared to what I had available on the training aircraft I did my primary in. I can see traffic and send flight plans back and forth on my iPad with Foreflight and quickly pull up charts on the touch screen. It's such an incredible situational awareness booster.
A&P/IA here. Looking great guys! Recommend replacing the u-joints that attach the yokes. You will find they have a little slop. Mcfarlane sells them.
I have two loose wires, and I panic. I admire Chris’s expertise. He didn’t even break a sweat.
This is going to be a very fun plane to fly. I'm excited for you that you did it your way and it's coming along so fast. Very much admire someone who gets after it like you do as opposed to procrastinators like me.=)
Huge fan, binge watched 1-8 in a night. Absolutely love the content glen!
Glen , Glen you have all this new awesome Dynon stuff , what about a blender , what if you wanna make a smoothie up there lol 😝
Thanks for the content Glen. I share your feeling that is seems overwhelming. Hopefully watching you do all this will give me confidence on my project. Thanks again.
Very nice 👍
The faces on those old dials / gauges are beautiful for a typography geek like me. They're great. Thanks for the enjoyable watch. Glad to see you're making progress!
I love seeing the wee tractor :D
Oh I was looking farward for this (honestly it's like that for every video) but a completely new panel is something you don't see very often
The look on your face right after you showed the Wig Wag device "😧😧😧 my god its never going to work again 😧😧😧"
It seems like a much better design to have the GPS antenna and receiver in the same module like this. GPS signals are really weak so you want to minimize transmission losses between the antenna and receiver
That is truly frightening tangle of veins and capillaries behind that board. Let the transplant begin!
Its simple. i see the video, i click the video, i like the video, i want more video.
thanks for sharing all the details of your new "toys". Even though I don't fly, I wanna learn just so I can use the instruments!
Up until very recently this was my every day at work. You've got an excellent AME in Chris. This is going to be a beautiful panel when you're finished.
Didn't notice it the last time I watched this video, but this time I noticed the right wheel and especially the front wheel are low on air. No wonder you struggled to get it moving;)
Wow some great goodies for your aircraft!
Chris seems like a really nice guy.
"I'm a little worried." Yeah that describes building a computer for the first time pretty well.
Good stuff, Glen! You are going to have the most up-to-date 172 on the planet!!
This will be a neat plane. Typically I’m a keep it classic guy but this is so functional! And the organization is very satisfying. Lol
Dynon makes some neat gear and they do really good work with Experimental builders!
Well done great video. Your pace was perfect. Cannot wait to see all this go into the plane. 👍👍
They say that automotive technology is several years behind but aircraft tech is still using serial port? I guess reliability is proven through time.
Nice videos, thanks. A daunting project.
Old gauges make awesome book ends and self ornaments
She's coming along beautifully, I await the next update with baited breath.
I guess the GPS module just spits out a NMEA data stream then... the satellite receivers and ephemeris calculations are all done at the antenna. Must have a pretty good operating temp rating! On that new glass, have not seen that many D-Sub connectors in a long time. Back in the eighties i was manufacturing some aircraft boxes.. lots of work with PEM nuts, brushed anodized aluminum, D-Sub conns and teflon wire. Good times. Cheers,
Exciting times
Exciting....Awesome. Good for you Glen!
Always love the uploads, thanks Glen!
I'm really enjoying these videos Glen!
This is great to see
My goal with my plane is to have steam dials primary, and the most basic glass unit as backup.
Looking forward to the painful detail!
I love this channel, I'm just worried about it ending way too soon 😅
Pretty cool that it's all DB9 serial communication. I am pretty impressed with the sheer simplicity of the Dynon product line. What I am more interested in is interference resistance... EG: That Alternator makes a ton of noise, what systems for mitigation of that? -- also RF, you have a radio / ads setup, what are the specs on that equipment for interference resilience? Go Glen! Loving this series! - ZM from Halton
@VeteranAviator
2 жыл бұрын
I don’t know all the beeps and squeaks of the system. I can tell you that with the shielded and grounded (bonded) wiring there is no perceptible interference with this system. Mine is the first plane I’ve flown that you don’t hear the strobes in the comm system. The wiring is all high quality shielded wire with the exception of the EGT/CHT spades which should be replaced prior to install. They are known to have issues and I had 2 on my own.
@VeteranAviator
2 жыл бұрын
I should have been more clear. I just did a very similar Dynon upgrade to my own plane.
Life should never be daunting if you have a Chris by your side.
wonder how the weight of the old compare with the weight of the new-still watching so perhaps yet to come. enjoyable.
@GlensHangar
2 жыл бұрын
There will be a fairly significant weight loss - we'll do a tally near the end when we do a full clean sheet weight and balance.
I would be worried, I lived by the mantra "nine times out of ten, it's the cable". That's a lot of cables and connectors.
You are way too early opening your Christmas Presents! Don't be surprised if Saint Nicholas leaves a lump of coal in your stocking for Christmas, for jumping the gun on this. (just kidding) Cheers from Winnipeg.
Can you do a complete cost breakdown for all this stuff. I have the exact same aircraft in Saskatchewan and I am looking to do this exactly as you are! Also, how does this stuff hold up temperature wise? Can it be stored in an UN heated hangar? We get -40 to -50 a few weeks a year.
@GlensHangar
2 жыл бұрын
The full Dynon price breakdown is here: www.dynoncertified.com/pdfs/Price-Sheet-single-web.pdf They also have a downloadable Excel spreadsheet that you can download and work up your own system: www.dynoncertified.com/aml.php#amlpricing
Keep an eye on ANGLE OF ATTACK on KZread. Chris Palmer is doing a similar project to you on a 63 172D.
@GlensHangar
2 жыл бұрын
He's doing a great series over there!
Install a Fst Stack to upgrade any avionics.
@GlenAndFriendsCooking
2 жыл бұрын
Yes- except Dynon includes as part of it's package all of what Fast Stack does. So in this type of clean install there's no need for Fast Stack.
as someone who's knowledge of avionics consists of this and your other videos, salt this comment to taste. It seems odd to use LiPo as back up batteries, even if they're not power cycling often, I wouldn't have thought their life expectancy would be suitable for aircrafts. I would've expected something like LiFePO4 cells. I'm gonna have to look into this more
@FowlerAskew
2 жыл бұрын
So I got curious and found a forum thread where someone took one of the packs apart. They aren't actually LiPos, they're regular lithium ion 18650s. Not quite as safe as LiFePO4, but still a lot less volatile than your average LiPo. The packs also have a built in BMS to keep them in line
Should be interesting watching the install of the new equipment. Just curious as to what do you have to do in the plane to prepare for the new equipment? I can only think you would need to cut out tge aluminum panel that held the old equipment and get a new piece of aluminum and make holes in it as needed to fit all of the new equipment.
@GlensHangar
2 жыл бұрын
Cutting the new panel is part of it; laying out where all of the pieces go in the panel is a huge deal. Also laying out where the components go 'behind the scenes', some will need to be in the tail / wings. Adding probes and wiring for a new engine management system that's part of the Dynon package will also take some time. And - since we've got it all apart... I'm replacing all of the electrical system / wiring / switches etc. Clean sheet install. So I have to pull new wire to all of the lights, etc.
I’m interested to see how easy it will be to see the info on the smaller screen. There’s a lot of mandatory info that you can’t, legally, remove.
Hey Glen! Very cool, nice video. Question, will this aircraft only have a VFR panel, or will you eventually have everything needed for IFR as well?
@GlensHangar
2 жыл бұрын
Initially VFR only - I'll be adding to it over the coming year for an IFR panel.
@64CadFltwd
2 жыл бұрын
@@GlensHangar Awesome! Can’t wait to see those videos!
welp see you on the 3rd of December
Great watching your progress Glenn. Curious, did you weigh the instruments you took out to compare to the new systems? Not sure if it would affect w&b. Wish I had something from my Skyland.
@GlensHangar
2 жыл бұрын
We've done so much work and made so many changes, that a full scratch weight and balance will be done at the end of the project.
@VeteranAviator
2 жыл бұрын
My panel lost 21lbs
One question Glen, does the GPS antennae have ADS-B and ADS-C downlink (data Cable) so you can get data for forefllight app or anything like that? Gonna be a sweet ride Glen. It amazes me as a airline pilot, how GA aircraft have way better avionics than we do on a 737 or DHC8.
@carbo19
2 жыл бұрын
my understanding is the GPS smart antenna from Dynon is passive - only reports NMEA data via serial to the panel so any reporting is done from a separate radio component
In the first age, in the first battle, when the shadows first lengthened, one stood. He chose the path of perpetual torment. In his ravenous hatred he found no peace. And with boiling blood he scoured the Umbral Plains seeking vengeance against the dark lords who had wronged him. And those that tasted the bite of his sword named him... the Plane Slayer. 🤣
@Pygar2
2 жыл бұрын
Is he related to the Wabbit Slayer? kzread.info/dash/bejne/hqKsz7ymm5zPp5s.html
are you going to keep the venturi attached? cuz it looks cool on the plane :D
@GlensHangar
2 жыл бұрын
I thought about it, but decided to take it off. Reduce the drag, and then add more drag with external cameras. The whole process is a give and take.
I’m baffled, 4 out 895 didn’t like this video, I must have missed something, can’t wait until the next one, I really like your cooking videos, but I really really like this channel
Hi Glen. Curious what pieces are still needed to make it fully IFR compliant. Seems you have everything there. Cheers.
@GlensHangar
2 жыл бұрын
I haven't done all the research yet, so I'm not completely sure - but it would at least need an IFR certified GPS unit. We'll go down that rabbit hole next fall.
Glen great video. I just found your channel. I bought a 1960 172a in November. N7812T. Old panel partly removed. I was going to dynon panel installed. Should I contact them to suggest certified installer? Or should I have them install at their factory?
What are you doing with those guages I would love to buy one I like those things
Looking good! Why did you choose the tail for the magnetometer over a wing location? Just curious. Better access?
@GlensHangar
2 жыл бұрын
Easier access and wire run - put it beside the ELT - also levelling and orienting it in the tail is far easier. If this was a homebuilt and the wing was open, it might be a completely different conversation?
@mapleleaf4ever
2 жыл бұрын
Makes sense! I am a fan of having easier access. All the Garmin and other installs I've come across have been in the wing. Good to know that the tail is practical too!
was there much of a weight change from old analog system to modern system
Just found your channel,,great series,,,,just wondering if you had looked into the owner maintenance category?
@GlensHangar
2 жыл бұрын
I did - and almost went down that road. But, the FAA will no longer allow Canadian owner maintenance aircraft into American airspace. Not sure what the problem is, since they still allow Canadian homebuilt aircraft in.
@mikejackman4416
2 жыл бұрын
@@GlensHangar ohh I didn’t realize that about the FAA I thought you couldn’t sell it in the US good to know great series I’m enjoying it..I’m rebuilding a Fokker DR1 replica
Does someone know what communication bus is used in airplane like this?
I look forward to seeing this when you're done with it. Dynon is probably the best value in glass cockpit right now. Okay, is this going to be a VFR only install or are you going to install an IFR-certified GPS Navigator/Com/Nav system with it? A used Garmin GNS-430 or 530 would go nicely with it. Also, autopilot? Were you going to install one of those with it? I really look forward to seeing this when it's done.
@GlensHangar
2 жыл бұрын
Initially we’re doing a VFR only panel, with a wiring harness for a future IFR upgrade (when the budget recovers). Autopilot is a maybe way down the line as we figure out what’s certified for this aircraft, but because it’s so old the chances are slim.
Thanks for sharing, BTW how much was the budget for Dynon Certified Avionics panel you installed in your Airplane?
@GlensHangar
2 жыл бұрын
All the pricing and a worksheet are on the Dynon website: www.dynoncertified.com/pdfs/Certified-Price-Sheet-032020.pdf
Hey Glen, will you be replacing the windshield as well?
@GlensHangar
2 жыл бұрын
Yes - the windshield is being replaced while the panel is out.
@VA3JPX
2 жыл бұрын
@@GlensHangar It's going to be brand new when you are done with it. :)
Looked like there was a fair bit of rust at 2:31 on a weld??? Or am I just in left field?
@GlensHangar
2 жыл бұрын
Not sure what you're seeing? I know that there was a lot of glue and old insulation up under the panel - nothing in there is welded, or even steel / iron.
@philiposm
2 жыл бұрын
@@GlensHangar it was up towards the top of the frame. It’s likely the glue or insulation as you mentioned.
Are this systems certified in Canada? That's definitely not the case for the USA. I went with a simple Dynon D100 and the rest of the steam gages but obviously I would have gone all in with the Skyview system.
@GlensHangar
2 жыл бұрын
The Dynon system is fully certified in Canada AND the United States. Definitely certified for the USA.
How much did all the analog gauges weigh??
Looking at the old v new instruments, it seems the plane will lose some weight. Have you determined how much?
@kjdude8765
2 жыл бұрын
He mentioned in a response to another similar question that they will do a complete weight and balance when everything is finished.
Weight difference, old to new?
😎✌🖖👍👌😁
Just curious what did all that cost?
@GlensHangar
2 жыл бұрын
The full Dynon price breakdown is here: www.dynoncertified.com/pdfs/Price-Sheet-single-web.pdf They also have a downloadable Excel spreadsheet that you can download and work up your own system: www.dynoncertified.com/aml.php#amlpricing
Can you post Chris' contact details, I'd like to speak with him re a Skyview install for my plane.
@GlensHangar
2 жыл бұрын
Chris @ Central Aero 705- 321-6864 He's at the Edenvale Airport.
.
25000 usd in parts only because there is a scrap of paper with every part.
@kjdude8765
2 жыл бұрын
Because of what that paper signifies: testing and compliance verification. If you label your plane as experimental you can do whatever you want.