Short, sweet and worked instantly for my Durango 2003. I truly appreciate it brother. God bless you and yours. Head on a swivel, the s* is soon gonna hit the fan. My home your home. Be well.

Actually just purchased that exact model from O'reilly. I have 2003 Ram 2500, it worked PERFECTLY....Done in 5 minutes sitting in O'reilly's parking lot. But then again, I followed the exact directions that came with the product.

@witbidder5961

6 жыл бұрын

UPDATE; I ordered 2 more fobs from ebay $13.76 total for both shipped to my front door. Used but OEM, fair condition. I wanted to see if the Dorman programmer would program these OEM (at the same time) SHAZAM, Success!! I HIGHLY recommend the Dorman programmers!

@lamar07103

3 жыл бұрын

SO what are people doing wrong? Looks like it works for some and not others

@tyler5120

3 жыл бұрын

@@lamar07103 They probably don't know how to read.

@pretyboy64

2 жыл бұрын

@@tyler5120 I know how to read bud I've tried it a few times I will work 1 time and won't work again I don't understand why

I just bought the same Key programmer and it worked without a hitch, by following the instructions as written. I was able to program 2 remotes and they work as expected. This sure saved me a ton of money.

Ace Hardware had "chip keys" for my car for $60 Vs $300 dealership wanted. They also sell remotes, but I have no experience with that option. Merry Christmas and Happy New Mr. Panda!

You have to turn it as if you're going to turn over the engine, but don't turn the engine over. Also don't have it on accessory by turning the key towards you. You plug it in it will beep 3 times. Wait about a minute for a single beep. Press the unlock and lock at the same time. I didn't even have to hold the unlock button. I pressed the unlock and the doors unlocked even before I turned the truck off and removed the programming device.

Same kit worked for me 1st time.

I just got my programer and it worked great

HEYeee I just Bought One from O'reilly auto the Dorman 99164 took it Home and BAMmmm 5 mins Later and it works Perfect .

Just bought this set for my 2004 Jeep Grand Cherokee along with an extra fob and it worked perfectly. I counted out loud One Thousand, One Thousand Two..etc. By my count you held them together for only 2 secs and the unlock for 1 second..

@ValYukhnenko

2 жыл бұрын

Hello! Did you use exactly this Dorman 99164 for your Jeep? Do you think it will work on my 2.7 CRD version? Year 2003 btw

@MoOvertones

2 жыл бұрын

@@ValYukhnenko yes it was the same doorman product. They seem to have good products, you should try it!

I had the same problem so I switched out the battery for a new one and then it worked perfectly.

true has been showned :) thanks for real true video man

It worked for me. Both key fobs ebays and the one it came with

your problem might be the same as mine. I just bought a 2006 dodge ram cummins turbo diesel and was trying to get a keyfob to work in mine too. couldn't! went to my local dodge dealer only to find out after giving him my VIN that my truck didn't come with the keyless entry. and it was going to cost me over $300.00 just to get it installed if I wanted it. did a little searching online and found out that in my truck there's a factory module you can buy that plugs in on the back of the gauges and then you can program remotes and have keyless entry but they don't put that module in all of them so yours may just be like mine and there is no keyless entry module there to program it to.

ok just did this SAME PART# to my 2004 Dodge Ram 2500. It works PISSAH you gotta do the lock and unlock , than the LOCK, NOT the unlock... IT WORKS GREAT!!! I was able to program 2 remotes, 1 found in the junk yard, and the 2nd from dorman. both work GREAT!!!!

I have an 07 Chrysler and this product says it only supports up to 06 but i know that's because the 07 forward models have a different clicker style and program method. My question is will this tool still work to get into the programming mode on an 07 because if so i can have the correct fob and know the correct programming method to do it on my vehicle.

I’ve bought that same one

I have a prowler also same issue no getting around the $300 dealership charge unfortunately 😕 sucks

If I install one of these for my 97 f250 will it cause the alarm system to go off if opened when locked Or is this only to have a remote to unlock and lock doors?

My experience has been a little different. I have a 2003 Dodge Caravan Sport. I tried every combination with the included key fob and I would get chimes from the programmer so I know the battery was working but the fob still would NOT lock/unlock my doors. I had purchased some other key fobs and when I tried programming them, they worked right away. I don't know what the problem was but I'm happy. Still can't get the included fob to work.

@brianmiller1197

5 жыл бұрын

I have a 2003 caravan and I just bought the same thing, hope to get the same results you did.

@moparguy9410

3 жыл бұрын

I will buy new key fob Because it’s not working too

I watched the actual dorm an instructional video and you hold him boat down for 4 seconds which was actually 5 and then wait 1 second then hold the on lock for 2 seconds and then release

Would be nice if this worked to program the key also. Especially when you only have 1 working key.

Out of curiosity when you were trying to program this the very end step says to wait two minutes before trying the remotes did you try that?

But dis you check rpo code to see if its a function that would wirk?

It worked on my 2004 Grand Cherokee

Did you check and see if the batteries was working?

Dodge uses the unlock and panic buttons to program. Car will beep or chime to let you know it worked.

@witbidder5961

6 жыл бұрын

worked on my 03 Dodge ram holding down lock/unlock buttons.

Your supposed to press the lock and unlock buttons for 3 seconds then the lock button for 2, also you can only plug the programmer in 3x max before it stops working.

you have to turn ignition on hold panic button and unlock button together then turn off ignition

Hello my brother how to get this and how much price thank you

Mine worked until the battery was changed at Autozone. I have the same setup. I have been trying to redo it, but it wont program it again.

It worked on my friends dakota

I just bought this and it worked perfect. Turn car to run Plug in programmer Wait 10 seconds Hold lock and unlock together for 3 Then press lock for 2 seconds It makes a confirmation noise. I waited two minutes and then tested like it said. You hit the unlock for 2 seconds instead of lock.

@monomcmoist7312

3 жыл бұрын

My truck has power locks but it doesn't have a remote, do you know if it will work on mine or not? Thank you

@officialDavidRees

3 жыл бұрын

@@monomcmoist7312 it actually depends. I've heard that "some" trucks that have a key hole on the passenger side didn't come with the remote sensor, but that sensor can be added to a plug behind the dash gauges. Also, it did not work on my wife's 06. Her truck has the fob on the actual key and needs a dealership or locksmith to program it. Mine is an 05 Ram 2500, anything 02 to 05 should work. I had no fobs at all. One fob came with the programmer and I ordered a second extra fob only, worked like a charm for both. The instructions on the back of the pack do say what this video explained but mine came with a little paper that said that after you hold the lock and unlock together, then you press the lock for a few seconds.

Hey a little late but the remotes I have One factory other clone take two (2) CR2016 thin batteries not one thick CR2032

I used this on my 2001 jeep grand cherokee

@ashleyspencer4927

3 жыл бұрын

I used it on my Cherokee; and I find myself having to push the buttons a few times to get it to do anything; also have to be like 6 feet next to it?

You have to press those buttons simultaneously at the same time bro

The likely problem is the RKE module is bad in the car....that is what needs to be programmed and if it is bad, you cannot program them. The dealer will charge you about $300 just to find out the RKE mod is bad and then tell you that the part is no longer made and there is no replacement mod for it.

@dp87479

Жыл бұрын

That’s exactly what happened to me. Any advice on how to proceed? Unlocking the truck with a key sets off the alarm. I got a new RKE module installed but I don’t know how to get it programmed to the truck now

I bought a Dorman kit and I always get a battery low with it. Even though I have a fresh battery in it.

Worked fine for me - the only issue I have is the remote start on the vehicle isn’t working

are you sure that the battery are still good???

Mine worked great for about an hour. Old fob still works, new one stopped

You need to turn the key all the way to the run without starting the car. Then do the steps, worked without the 2 min wait.

@jerib4514

2 жыл бұрын

mine did not

"Press LOCK and UNLOCK buttons on the Key-fob SIMULTANEOUSLY for 3 seconds. Press the UNLOCK button for 2 seconds" You my friend held both....lol. FOLLOW DIRECTIONS then it might work.

Didn't work on my 2002 Dakota

So I have 2 2003 Jeep grand cherokees one has a remote one doesn’t I just got this today and in the first Jeep I plugged it in it beeped 3 times then nothing remotes wouldn’t program I decided to try it on the other Jeep with the remote same year and model as the first I plugged the box in the red light on the bottom stayed solid unlike the other Jeep and the remotes both programmed after the initial three beeps I’m lost I don’t understand why it works on one but not the other they are literally the exact same cars

@tommytalbot7566

6 жыл бұрын

I actually figured out my problem in my Jeep the passenger door was replaced and it didn’t have the remote receiver in the new door so I have to replace the passenger door module and I should be good to go

@tommytalbot7566

6 жыл бұрын

Replaced the door switch today and the remotes work like a charm

Bought one for Buick. Was told after it never worked that they are programmed to die after 3 uses! They don't tell you that!

@bikelife_frank6109

5 жыл бұрын

M H what is supposed to die?

@buzzkill7349

5 жыл бұрын

The OBD interface is designed to only work 3 time or 3 power-ups, then it dies and won't work again.@@bikelife_frank6109

I want to reverse engineer this Dorman product as it will pull the security pin from SKIM module to put truck into programming mode when all fobs are lost. My fancy scanners can't even do that, need to EEPROM the skim module to find out what the security code is.

Says dodge / chrysler on the package, you have a PLYMOUTH prowler, 😆 🤣

When I did this. A error code came on and said error

It didn't give you options to buy 2

Dose it work for 99 jeep grand cherokke

@3865ron

Ай бұрын

It claims it won't but I took a gamble and it works on my '99

U right it does not work.i have 2001 dodge Durango did not work

just did it working good, attn: need to hear a chime sound when you press lock and unlock buttons at same time and then press LOCK button ( not the unluck button ) what a little mistake by instruction hahaha, if don't hear a chime sound that means there faulty or defective key fobs never work, purchase the Dorman programmer work but the key fob came with it doesn't, lucky had purchase two key fobs ready from ebay done it right a way........

You times that too quickly fam, your 3 sec was 1.8 seconds.

Hmmmm you read the directions?

Mine says to hold the LOCK down for 2 sec

What year was your vehicle....

@petervonpanda

2 жыл бұрын

2001, Paul! Hope that helps!

@paulmackenzie1850

2 жыл бұрын

Thank you, my programmer worked for my 2004 Jeep Grand Cherokee. My p/n was different than yours of course...

I just bought one from eBay it don't work either

اللهم صل وسلم وبارك على عبدك ورسولك محمدﷺ

You hit lock not unlock

It’s 15 to 20 minutes of holding the lock and the unlock button

Its OBD port not ODB port

You used the wrong model. That’s why it didn’t work.

I have an 04 Chevy impala and it didn't work for me neither 75 buck down the drain garbage there is no other videos show what to do when it doesn't work

@petervonpanda

6 жыл бұрын

They replaced mine, and the replacement didn't work either. Ended up having to go to the dealership to get it done which I did a video on... ended up costing me $180 at the dealership.

You did the steps wrong

@hahahahaha2636

6 жыл бұрын

Kaiim Gibbs-Nishimura exactly what I was thinking. Dorman put out a video specifically for this set.

I don't think his count of 3 seconds was right. That was a Bit to fast and unpatient for the programmer to actually program itself. Especially when it come to computer & Data to a New frequency trying to tap in

Hol tudok venni

held button too short

You are doing all wrong ..read the instructions on the obd device another thing if u bouth the wrong one your read on the back of the package should specific the model and year to work on ..I have successfully 100% made work averytime I program them.. successfully done it.

That’s sad. I was hoping that the remotes would work.

@petervonpanda

6 жыл бұрын

I have sent mine back for a replacement to try again, but I'm not optimistic.

@2tallB

5 жыл бұрын

Dude, tons pf people have used them successfully. Clearly there's some other problem with the connections in car.

Eye em knot a smart man butt eye red tha intrukshuns rite on the laybal of tha progammar in tha parcking lot at otto zone and did axakly wat it sed two do. Tha harist part waz opining the packige two git tha thang owt! Toock men too minitits two maYke it wurk. :)

Product is terrible

follow instructions on programmer. paper had misprint. worked!

Hello my brother how to get this and how much price thank you