Hell yeah, a life without drifting across all platforms is now possible 😌

@nexusprime2487

9 ай бұрын

Now if only Sony, Microsoft, and Nintendo actually uses hall effect sticks instead.

@pawel8567

8 ай бұрын

Hall yeah 😂

@Lewis99

8 ай бұрын

​@@nexusprime2487Probably means people buying less controllers, don't think we'll see that happen

@nexusprime2487

8 ай бұрын

@@Lewis99 Of course aside from the consoles, the real money saving graces for them is the controllers.

@corporatetool2563

8 ай бұрын

1st party Dreamcast controllers were Hall. Early PS3 controllers were too, before Sony got smart.

Thanks for the video! Been seeing those Hall effect sticks for a while and have been apprehensive of them

At last! all hail the people who made those I might get myself a dual sense finally

And I just bought a new Stellar Shift controller... This is seriously great to see though! Super excited to get these type sensors developed and finally out to gamers

@originsmaster8140

Ай бұрын

Bro they’ve been out for decades. And they’re only a few cents more to make. The problem is they save the consumer too much money because the people are buying a new controller every 6-8 months. If they developed high quality first party controllers that used Hall effect Joysticks, they would lose out on MILLIONS in sales.

Marius Heier's design I think will be the actual definitive hall effect joysticks once he's finally completed his design. They'll probably be more expensive but likely won't require extra PCBs to make them work.

@tekgeekster

10 ай бұрын

Kinda. The pcb will come attached to the potentiometer instead of having to order one separately.

@konishiwoi

9 ай бұрын

@@tekgeekster which still means only one part to install

@High.on.Life_DnB

9 ай бұрын

​@@tekgeekster The point of the video is to replace the potentiometer stick with hall effect sensor stick 😉 no hard feelings 👍

@samxl001bd

9 ай бұрын

Did he say when he will release the joysticks?

@flametai1

6 ай бұрын

Just here to second what Sam asked

finally I can buy anything without a worry

It looks like the way calibration works is that the piece of metal you insert in the hole will slightly move te piece of plastic that holds the magnet to one side or another. If it can easily be moved like that, i bet it will move with time and friction against the cage and you'll have to keep recalibrating.

Sick edit bro 2:51

Have them , modded with replacing hall effect sensors with potentiometers for my flydigi apex 2 and works really well. Build quality of the module base is FAR BETTER than alps.

@_Cntdr

9 ай бұрын

link for Hall Apex 2 please.

@tatianamellstrom7806

6 ай бұрын

no stick drift i assume?

@pawes7418

6 ай бұрын

@@tatianamellstrom7806 yes

@misuki6579

4 ай бұрын

i'd assume the stick is compatible accross multiple console ?

Subscribing, I like your research 👍🏾 thank you

Still a lot work involved, don’t think I’m ready for this yet!

I've repaired a couple of controllers from various consoles and if I remember correctly the joysticks on the PS4 and PS5 controllers are pretty much the same.

Hello, nice work! Amazing to see that more manufactures are selling this type of joystick, Can you test how they work on Xbox series Controllers ?

@OmniTechGu

8 ай бұрын

They don't... I've tested them on 3 generations of Xbox One controllers to no avail. I came here to see if there was a way to make them work... But if there is, I haven't found it yet.

@Josh_Spectre

8 ай бұрын

@@OmniTechGu Thanks, good to know, we need to wait till they release a working version.

if someone would be so goated as to make these for old consoles 🙏🏽

amazing ! love to see it get done on the xbox please

@VKsChannel

10 ай бұрын

it is the same process but you have to buy a different module, just solder it in then calibrate and you're good to go!

@Ebolachicken

10 ай бұрын

@@VKsChannel Thanks I just watch his video i was wonder if you need the part in the back on the elite controller.

@HeatFlames24

7 ай бұрын

What module do you need for the Xbox controller. Do you have a link for it?

@REJR90

5 ай бұрын

​@@VKsChannel so just install do the hole thing and it's ready?does it also have the jitter/circular issues amd what can be done on xbox

@Voltech230V

2 ай бұрын

@@VKsChannel is the Xbox consoles do the same as PS5 - eliminate this shaking effect on center position? Did You tested it?

This stuff is going to make me buy a soldering iron and save money overtime

Cool, the calibration is a pain but I'm glad it exists now, thank you Gulilit. Is there a difference between the blue and mango orange one or they're just colors, any PS5 revision is compatible with any color? God bless Gulikit. Are they better brands though in 2024?

Hope these will be compatible with my PowerA Xbox style controller, would love to switch out the joysticks I currently have for them, one of which is completely busted..(I have 2 of the controllers)

Does the circularity and jitter matter much? I just watched your video on installing Jun's board, but i dont have anything to solder with. Planning on just using these modules on their own

@SzadoB

5 ай бұрын

It doesn't matter, circularity is a pointless test, and jitter is filtered by setting a dead zone

Finally, now we just have to wait for this to become mainstream. Im excited.

Sadly Microsoft and Sony are never going to use these joysticks, they make waaaayyy too much money out of selling their cheap controllers. I'm getting a new one every 8 months - 1 year. And I know a lots are just like me, this is tons of money for them. :(

@morrisdennison8039

26 күн бұрын

Theys why you need to learn to repair your stuff yourself. I know it’s doubting but once you get the hang of it. It get easier and easier

@italianbasegard

7 күн бұрын

@@morrisdennison8039I’ve repaired my controllers with replacement sticks but part after part are continuing to go out on the board. Finally, the A button on the front is giving out on my oldest Series 2 (oldest out of four). I’ve had to desolder-resolder new sticks onto the oldest 2, and had to resolder bumpers on either 2 or 3 of them (each time replacing both bumpers when I’m in there). I’m not sure what to do about the A button going out, though, and that pains me. Some people literally suggest writing over the contacts with a pencil, but I’m looking for a solution not a workaround, and it seems like not many (if any) exist. Long story short, It’s just one thing after another going wrong with them in time… to the point it’s almost better to just start over with a new controller. I as well am unwilling to accept it, and I’m still fighting the good fight of repairs instead of just buying another controller, but man do they make it difficult. If only it wasn’t such a damn good feeling controller in the hands.

@carpediem7654

4 күн бұрын

Bro i have 3 Xbox controllers with bad sticks. I decided to stop buying them and I ordered 6 of these hall effect sticks from ali express. I installed them and my controllers are practically brand new again. It's totally worth it.

@Silverfox607

3 күн бұрын

@@carpediem7654 I'm in the same boat. My controllers die from either stick drift, or my cats knock my controller on the floor and it damages the USB port on them. These don't seem super complicated to attach, I just have to learn how to solder and I can stop buying new controllers again. Id much rather buy a 25 dollar pack of replacement sticks and a 10 dollar bag of USB-C ports than a 60-70 dollar new controller every year.

@Eac18

Күн бұрын

Buy the pro controller. Analog stick replacement is only 20 dollars and you don't have to take apart the controller to replace them

Can you make a video, implenting these sticks with Jun's module on an xbox series s/x controller?

Nice product, wish it was cheaper

Now someone just needs to buy a ps5 controller & install these along with extreme rate back buttons and sell them!

Muito bom o canto dos passarinhos.

Did you test it in a game in which you can change the deadzone to see if the jitter makes a difference?

There is a script in python you can run and it will calibrate ps4/ps5 controllers. It's not perfect for hall effects but it makes installing them a lot easier.

it works on xbox I had taken the model for ps4 (my mistake) but it is very difficult to adjust because there is no room for maneuver, so every time you have to disassemble, calibrate, and reassemble hoping that it works. and when you press the left trigger, the stick moves, because under the lt button there is 'a magnet

@VKsChannel

9 ай бұрын

You have to buy the correct model

would be nice for oculus / meta quest 2 (and maybe 3)? i`m using my 3rd pair of controllers because of that drift. hallsensors would be e great solution.

Need one for elite series 2 very badly

Awesome video! If Sony won't do it, I might when my controller's stick drift starts to get out of hand (and yes it's worsening over time)

already sorry for my bad england, but it possible to put hall-effect stick to xbox elite series 2 controller? because default sticks have much deadzone and little bit drift btw i know thumbsticks is different between elite and normal series x

@hary2688

4 ай бұрын

They are on AliExpress

So for quick review... is there a video on how to install the hall effect sticks for the PS5? The video for calibration does not include how to actually tear apart the controller and attach the sticks themselves. Also, with the corrective board would be nice too. I have waited way too long for Hall Effect to come to PS4/PS5 and Xbox. This should scare the crap out of Sony and Microsoft because having these installed on a controller would save $70-80 in the course of potentially years. Thank you again for this info. Hopefully a full tutorial on how to put them all together would be great.

@VKsChannel

9 ай бұрын

The sticks with jun's extra board is on the way I'll make a new video when it arrives

@Dzugashvili

29 күн бұрын

i mean, that's precisely why they don't switch to it themselves i would bet. gotta keep people buying products designed to fail

Wow

unfortunately Jun's calibration add-on isn't cheap. i'd love to add it to my modded controllers but i think i'll wait until the price comes down or an alternative comes around.

Hey man, do you think the Xbox One hall effect modules works for 3rd party? Like hyperkin or powera

Can I use this with a PowerA controller? For the xbox

Você chegou a fazer algum teste separado com esses analógicos laranjas no controle de ps4? Eu tava querendo substituir os meus com eles, mas ainda não tenho muita certeza

@VKsChannel

10 ай бұрын

Funciona igual, tem videos no youtube mostrando eles ja

@VKsChannel

10 ай бұрын

Mas tem q comprar a versao propria pra ps4

Horizon has a high deadzone setting which you can not change, you should have tested the stick on a game where you can change the deadzone settings.

this is a major pita on the xbox controllers. You need the daughter board connected to actually plug it in to test and zero out the deadzone. Also for whatever reason. I adjust the deadzone in one hole. Its moving. I move and let the stick snap back like you're doing. But its just back to what the deadzone was before. Doesn't change

So the ps5 version will work with Xbox one s controlle, and not the ps4 version? I found there is 2 model in market 10k and 2k2, I don't know the deference and which one compatible for xbox one s? Iam hella confuse here, hopefully you will answer. You got new sub

@roncconi

2 күн бұрын

Does this PS5 joystick work with the Xbox Series S controller?

Without adding a pcb, wich version is better for the ps5, the yellow or blue type hall analog?

@weedless9531

2 ай бұрын

did u find out which are better blue or yellow ?

hi vk its been 6 months since ur test video for the switch hall effect sticks, have u got the new 2nd batch sticks and will u make a new video for them and where do i buy the 2nd batch sticks from cos i dont want the 1st batch ones thx

@VKsChannel

10 ай бұрын

Hi! Yes I did but I haven't been using them on my main joycons because they feel a bit more stiff than original analog sticks, so I put them in my secondary pair of joycons and haven't used them ever since I still use my paper fix and its working perfectly, had to replace the cardboard piece once and thats it

Might do this for a drifting dual sense and use it on pc, worth it?

I replaced the switches to hall sensors and it worked beautifully for a while then I got the 2 orange blink error. I double checked the battery connector and it seemed okay. What could be the problem?

Whats about xbox some say isn't work for it because left trigger magnet directly under it also there is a video about it it didn't work. But I don't know if what's in the video is xbox magentic joystic mabe he used ps joystick please answer. Already got xbox version

wouldnt the left stick of the Xbox Controller be affected by the magnet on the left trigger?

Wich version is the best ? White black or red ?

Anything for the Nintendo Nunchuck?

Does the magnetic field generated by controller vibration affects the sensors?

@VKsChannel

10 ай бұрын

not really

Hi, do you know if it is compatible with NS pro controller?

would this only work on pc after of would the ps5 register the imputs too?

why i cant find the ohms to this? Does it no longer matter when installing hall effects?

Thank you so much, Sir! I want to mod my Controller. I just subbed. Will you update us on new Magnetic Sticks? I'm a bit worried becaue the Shaking. Also, I found a 400mAh Battery Kit on Amazon for the Dualsense, are you also into this kind of stuff?

@VKsChannel

10 ай бұрын

Get jun's module It has the shaking fixed

@Layhss

10 ай бұрын

shaking isn't seen below around 3 deadzone, which is really low and lower than the average 5 (in esports) you will be completely fine the jittering is in the center where even if you tapeed the stick it still wouldn't move, deadzone practically or does cancel it out

@OraOraOra

10 ай бұрын

@@Layhss Thanks. How do you set the Deadzone on PS5? I will use my Controller on PC, there is DS4 Windows and Steam Input, right? And ofc in game settings

@BenutzernameXY

9 ай бұрын

@@Layhssin apex you don’t play with deadzone

@Layhss

9 ай бұрын

@@BenutzernameXY what do you mean you don't play with deadzone? people use dfferent settings

3:33 Large circularity. Ide bet i could shrink that to just over 100% with 3x3mm trim pots 😆...

@TheControllerPlug

5 ай бұрын

please explain? 🤔😅

@GOATGamerProSticks

5 ай бұрын

​@@TheControllerPlug I can do better than explain. I've got the videos 📽️🎬🎞️🎬 and resistance changes 📊 mapped out for calibration 🎚️🎛️🪛 📈📉 for circularity ⭕ & deadspot 🎯 sake size & positional adjustment to prove the trim pot method. An Xbox one pad 🎮🕹️🕹️🎯🎯🪛 playlist & a DS4 pad 🎮🕹️🕹️🎯🎯🪛 playlist with the bulk of my work in there where you 🫵🏼 & everybody else will understand everything I claim to know 😉😜👍🏼. Look 🥹 & yee will find 🤗 friend, the super simple method of manual resistance manipulation. It's not futile it's mine 😁 😂🤣.

@GOATGamerProSticks

5 ай бұрын

​@@TheControllerPlug What pad 🎮 do you own to work on?

Would this work on a series 2 elite controller? I’m looking at options for replacing my left and right sticks on mine due to stick drift.

@VKsChannel

10 ай бұрын

yes you should pick the xbox option when buying

Do you have the video link to how to install the Jun one with the board? Curious to see how hard it is first before I buy

@VKsChannel

10 ай бұрын

Jun will send me the modules soon, I haven't got them yet

Wonder why you just cant calibrate it on the ps5 its self switch lets you do it

Is there dead zone or delay? on those hall effects stick

Will they work with the dual sense edge? If so, I am pretty sure that the ps5 allows for calibration on those.

@Darklord_tK

7 ай бұрын

This is completely unnecessary for daulsense edge since you can just buy new stick modules for it, however with the base daulsense the only option is to completely replace the controller, these halleffect sticks save you another $75 where the edge modules are only $20 and as long as you're not literally destroying your edge $20 every other year isn't bad, but I'm not going to spend $200 on a controller I'm only going to play games casually with

*WHERE IS THE UPGRADE FOR THE LOGITECH EXTREME 3D PRO*

Do you buy the ps5 one for the series x or the Xbox one

***Has anyone changed the internal spring to increase stick tension ??

Do i need now the hall effect sticks with the pcb or just the hall effect sticks without it? Any answer would be nice. Thx.

@richh9570

8 ай бұрын

It depends on which model you choose. June's model comes with a kit which requires the pcb board. The other model doesn't need the extra PCB board.

Will this work for a Scuf FPS controller? i've heard bad things about how long a scuf can go without drift and was wondering if a hall-effect is compatible?

@LUCKIPUP

6 ай бұрын

it should they all use alps sticks, i would double check the pin count for the potentiometers

Uma observação: todos os controles com analógicos hall effect que já testei precisam ser circulados (girados com o dedo) pelo menos uma vez a cada vez que você liga o controle, pois caso contrário drift acontece.

@VKsChannel

10 ай бұрын

sério? em todos os controles que testei nenhum teve que fazer isso não tem certeza que não é do jogo ou do pc q vc ta usando?

@williamtael8379

10 ай бұрын

@@VKsChannel Pode ser os emuladores. Testa o Vader 3 Pro ou o KK2Pro no Yuzu, Cemu ou algum jogo de PC. Liga o controle, não mexe nos analógicos e durante o jogo empurra o analógico esquerdo para apenas um lado para mover o personagem. Se ele começar a andar sozinho vai comprovar o que eu disse. A mesma coisa acontece no analógico direito.

@paulodossantos5380

7 ай бұрын

Ué. BR?

@williamtael8379

7 ай бұрын

@@paulodossantos5380 Sim.

@paulodossantos5380

7 ай бұрын

@@williamtael8379 boa. Assim fica mais fácil de pedir ajuda pra resolver problema dos meus controles de PS4.

Você chegou a testar o sensor de movimento do controle? Acabei de instalar os analógicos laranjas magnéticos no meu controle e estão funcionando bem, mas percebi que o sensor de movimento do controle que eu uso para mover o cursor e digitar no teclado virtual do PS5 não está funcionando direito. Será que fiz algo errado durante a montagem?

@VKsChannel

4 ай бұрын

No meu funciona tudo normal

@VKsChannel

4 ай бұрын

Pode ser defeito do controle mesmo uma vez q o gyro n tem correlação nenhuma com os analógicos

@gm-jura

3 ай бұрын

@@VKsChannelvou esperar o analogico do meu outro controle apresentar defeito e então fazer a troca também pra ter outro comparativo mas acredito que eu fiz algo errado durante a montagem do controle que afetou o giroscopio.

btw i like tension xbox 360 controller, its more hard/strong than xbox One or xbox Series controller.. strong tension make stick quickly back to center after release it.. im also prefer rubber ABXY on xbox 360, the reason is same, more hard😂

Vk do you have a video of these working correcting in an xbox series x controller?

@VKsChannel

7 ай бұрын

No when I bought these they were only available for the ps4/ps5

Hello... Can u do it in cod mw2 with maximum sensitivity r3 or aim. I want to see if it gonna have jitter filter or neutralize it by ps5. 🙏🙇‍♂️

@VKsChannel

8 ай бұрын

Get jun zeng's module, it has no jitter and its overall much better, the links are in the description

What is the behavior of these joysticks gaming on Windows PC?

Will these work in a scuff instinct pro?

I click on the seller's product page on ali for those boards and one of the three options is "joystick" and is one single joystick with a price over 9000? What's that about?

@VKsChannel

9 ай бұрын

Probably selling in big quantities for resellers or game repair shops

Sabe se lguma loja/oficina de console no BR já trabalha trocando esses sticks?

@VKsChannel

7 ай бұрын

Acho mais facil vc comprar as pecas e levar em qq loja de reparo e pedir pra trocarem O procedimento de troca é igualzinho a um analogico original, vc só vai precisar calibrar depois

I just want to change to hall sticks on my xbox elite series 2

I brought these modules, but using circularity test it makes square shaped as shown in the video, how to make that square to circular?

@VKsChannel

4 ай бұрын

You can't Only jun zeng modules can fix curcularity

Hi just a question, must i get the circuit board together with the hall effect joysticks? Or can i just get the hall effect joystick and socket it into the ps5 circuit board itself? Appreciate the help :)

@VKsChannel

9 ай бұрын

There are 2 different models If you buy the orange one you dont need the board But with Jun's module you'll need the board that comes with the kit

@ghostashghostash1518

9 ай бұрын

@VKsChannel Alright thank you for the prompt response! Have a good one!

@icanic

9 ай бұрын

But what about circuality test, it is really bad wih yellow one?@@VKsChannel

@VKsChannel

9 ай бұрын

@@icanicI did the circularity test in the video, it's not reeaaly bad, I've seen worse but they're not good either, In the end it depends on the game you want to play

@icanic

9 ай бұрын

​@@VKsChannel yes, I watched the whole video but I think 20% error is bad for aiming.

Wouldn't the Magnetic Left Triggers on Xbox interfere with the Left Sticks because it's right under it?

@VKsChannel

10 ай бұрын

Well from reports on the internet it doesn't affect it but I can't confirm it for sure

Me with A Duelsense Edge: Well crap.

@VKsChannel

10 ай бұрын

well I GUESS that you might be able to open the analog stick module and replace the stick inside

Do they sell these somewhere that will actually ship what I order? I closed my Ali account because they got fewer than 10% of my purchases to me and only a third of those actually work, that place is just a scam pit as far as I'm concerned.

Could one install this on an old XBOX 360?

I saw that there are two versions, one blue and this orange one you showed. Do you know if they are any different?

Tienen un driver que corrige la variación de señal

yes,i am looking into this but the hall effect sensors seem out of stock on multiple ali vendors?? And the jun zeng's pcb boards+hall sensors are pretty expensive on aliexpress 30$ incl shipping?The hallsensor and pcm board as 1 set should be like 3$ or so as a fair price,.. (The hall sensors are like 40ct a piece and a pcm board like that should be like 1$ a piece max,so 3$ is already a 100% profit.) And to install you have to be a kindoff pro technician with soldering skills and professional gear,because many small mistakes can be made and it wont work.. Anyways thank you VK for this video,hopefully this is a solution for the billion dollar industry of stick drifting controllers,i bet sony and microsoft etc dont like these kind of engineers.Jun Zeng can be a hero for millions of gamers worldwide,if the setup works.It's just a matter of time more vendors will supply the sensors and pcm board for reasonable prices.I am gonna try it out anyway and buy it from Mr Zeng,i do award him for all the work and efford to design the driver pcb board.

@dark-california

8 ай бұрын

Any updates, what's your experience ... ?

@boefje1976

8 ай бұрын

Hey Dark,thanks for asking,unfortunately not yet,i do have all the parts from jun zeng now,the total cost came up to 64,25 euro for 2 pairs🤥,because sender forgot to put ioss number on the package,and double vat had to be paid...just finding the time to install,i will update when installed@@dark-california

Anyone selling hall effect stick modules for the DualSense Edge? (I mean so that you can just click them in like the official replacement modules)

I would like to install them on 8bitdo pro 2, which version should I buy?

@DigIntoGaming

10 ай бұрын

I too am interested in this. I like the 8bitdo pro 2 layout and features but I really don't want to deal with stick drift.

I need a new Xbox elite controller badly but I don’t want to get a new one because I feel like the gen 3 elite controller is going to come out soon so idk

@-Zarion

6 ай бұрын

Same, gonna buy the gulikit kk3 max and hope its a good one, while I wait for Elite 3, but if they still don't fix the button issues I won't come back to microsoft.

What makes these so good?

@Mickparrysstepdad

4 ай бұрын

The magnet doesn't touch the sensor, so it's can't wear out, unlike the Alps pots that all the manufacturers seem to use these days. The Alps pot have a metal 'wiper' that presses against a carbon track. Every time you move the joystick, the metal wiper is moving against this thin, carbon track and wearing it away.

@carpediem7654

4 күн бұрын

​@@Mickparrysstepdad i ordered 6 and replaced them on 3 controllers. Brought my controllers back from the dead. Amazing. No need for anymore controllers.

Why isn't there a company selling upgraded versions of xbox and ps5 controllers with hall effect fixed etc out of the box?

@georgepierre3594

Ай бұрын

There is. Check out Flydigi Vadar 3 and apex 4.

No stock for ps5 controller?

what if i used the xbox one version on rainbow 2 pro controller i hope this actually works

Does anyone know a service that will put on and calibrate hall effect sensors on your controller of choice?

@MtnNerd

5 ай бұрын

You might try a local computer repair shop since the tools are essentially the same

The problem is not the part or the soldering but the calibration required after installation.

@VKsChannel

10 ай бұрын

Its a bit finicky but not too hard

@Layhss

10 ай бұрын

easy to do once you do it once, it can sometimes take a while, but I found a trick to it but it involves tinkering on both axis

you should add to your testing methodology the range of each axis.

@VKsChannel

10 ай бұрын

What tool is used to test this?

now just hope the button on the joystick itself doesn't break l

Anyone knows hall effect sticks for ps2 controlers?

Can i add to xbox360 gamepad?

How can I do on PS4 controller?

What about Elite controllers?

Are these compatible with the Elite Series 1?

@samsonite187

5 ай бұрын

Any luck figuring this out?