I agree that most desk top detailers give CG a bad name without knowing much about the product and that's sad. You gave a good review and showed us the results, thank you for your honesty.

@apexdetail85

6 жыл бұрын

J Coz The Torq polishers have been great so far. The Honeydew foam is ok as well👍🏻

I like Chemical guys bc of how well they market... The videos they have gave me the confidence to try paint correction on my truck... The way they make things simple is nice for a beginner...

I've used all four of these products with no issues for two years now on everything from a paint correction to a minor polish and have they've worked just fine. They are meant to be used as a step from the other. Start with the right compound for the job then step up. I've done a 32 then 38 and had beautiful results using a Torq Da polisher also using different grades of pads. They performed very well and I continue to use them.

@MrJuandiego1988

2 жыл бұрын

What pads do you use?

Thank you for taking the time to make this video. Very thorough and definitely answered a lot of questions about how to use these. It works really well that you took the time to do a voice-over instead of talking while you were operating the machine. Very professional. I just ordered the set of 4 small bottles of the CG compounds/polishes and am definitely eager to try them out. I agree CG gets a bad rap. Most of it self-inflicted! If you watch any of their videos you wonder if there's any grown-ups running the show. And their product line is way too big. I think they even have 17 different detail sprays. :) Thank you again and keep the great videos coming! Mark (driveway detailer)

@apexdetail85

7 жыл бұрын

Thank you Mark!!. you will enjoy the polishes...They perform well. Let me know how they work out for you!

I really enjoyed your no nonsense comparison of the Chemical Guys products and how well they worked. Straight forward, what to do and how to control the work for optimum results. BTW enjoyed the "desktop detailer" comments, haters always be haters and you're right on point. I use all their products for waxing and detailing, just starting with the compound corrections on my personal vehicles.

I just did a whole paint correction with the V line from CG, im was satisfied with the results. I do think having some of their pad conditioner is a must or detail spray

You deserve more subscribers. Great videos.

thanks brian,I love your vids,keepm coming.

@apexdetail85

7 жыл бұрын

Thank you!! Your support is greatly appreciated!!

The compounded sections don't look as the polish sections, because you're suppose to follow up compounding WITH the polish. You don't just use a compound and call it done, you always follow up compound with polish.

I honestly can say I love their product .I've used it on 2 cars for my customers and my customers. and they're absolutely completely happy with the way their cars turned out there customer service is awesome. I've been using their new torque FX10 great buffer and even when I broke it . they replaced it it's a win win honestly can say I love their product . I've used it on 2 cars of my customers cars and the for my customers and they're absolutely completely happy with the way their cars turned out there customer service is awesome I've been using their new torque FX10 great buffer and even when I broke it when I broke it they replaced it. it's a win win I think it's a very good product .I have all their series including their jet coat

Thank you for an honest review. I started using them and like them

@bobkurmis5347

3 жыл бұрын

Beginner here. QED???

@loba00769

3 жыл бұрын

@@bobkurmis5347 not understanding

I LOVE their pad cleaner. I've had some issues with their customer service though. I've never experienced such an indignant company. The first issue was my very first order. I ordered a set of 5.5" pads, and they sent 6.5". They told me to "just use them, they're fine". I got a 6.5" plate out of them, an reordered the 5.5" pads. Second issue was my polishes went watery. Their response was "it will work"... So I threw them in the garbage. The third thing was some bogus pads. I used the green pad a lot, and always carry a bunch on stock. In 2014 I ordered a few. These pads were a different shade of green, Had smaller hexagons, and really flimsy loop material. I got them over the winter, and wasn't going to use them until April. When I did use them, the backing separated from the foam. I talked to a really nice girl over there who said that someone would contact me. They never did. I got missed and sent them a pretty clear message of what I thought their brand of professionalism. Well, they finally contacted me back, and offered a 10% discount off my next order... Like I said, their pad cleaner is excellent, but I don't have time to deal with a company who carries this philosophy in business.

@apexdetail85

6 жыл бұрын

I have heard that a lot lately... not very professional 😡

Awesome video thanks for this

It also depends on how much cut your pad has, if you have to use V32 you have to move to V34, V36 and finally V38, then top off with JetSeal then wax.

@diyhometrucktrailerandcamp4861

6 ай бұрын

Yer absolutely correct, I get great results when applied as a compound 32-34 and then stepping up to a finish 36-38.

Thanks for the videos

I know you were trying to compare product results, but to be fair to the products, my opinion is you should have changed the foam pad to the corresponding product. Why did you use an aggressive, orange pad with the V36 and V38? If you go on the chemical guys you tube videoes, they are pretty clear about using the right pad for the corresponding product.

I don’t like chemical guys or their marketing but to be honest I do really like this compound line

On your first run with the v32 keep in mind the V line is a step system If followed with the v36 then v38. It would’ve turned clear

Cheers for the review Brian, very informative as usual....waiting for a menzerna one now..lol....

@apexdetail85

7 жыл бұрын

Love Menzerna... as well as Wolfgang. Will touch upon both in the near future. If there are other products you would like to be featured, just let me know!👍🏻

@richardkkirk

7 жыл бұрын

cheers Brian, I don't know if you can get some of the ones i like, bilthamber.com is the web address..i already use their clay ( don't need to use qd, just water) and i use their korrosol ( fallout remover) fastest stuff i've ever tried..lol.....cheers have a great weekend.

@apexdetail85

7 жыл бұрын

You have a wonderful weekend Richard. I was impressed with what I tried.. so far. I will definitely cover that as well. I have s list as long as my arm of tools and chemicals to cover in the future... now to just find time to do it! 😂😂

While I enjoy watching your videos, I am not crazy about Chemical Guys products. Recently I switched over to the Griots Fast Correcting Cream and Correcting Cream, and they do not dust and have long working times. Gave away the 3M AIO, which was not really a bad cleaner wax. Chemical Guys products are expensive. The Flex 3401 with the LC hybrid pads, and the G8 and G9 with their pads work out really well. Through the years, I have used many products, and outside of Meguiars ultimate wax, or their paste wax (which I really like), Griots takes the prize, and they finish really well. What is neat about Lake Country and Griots, you really only need a cutting pad, a polishing pad, and a wax pad, given you have the compounds/polishes/waxes that compliment them. Good Job on the video and comparing other products. Most people watching these videos are not professionals and learning the trade. CG has too many products and can be confusing.

@kevinzonts8248

Ай бұрын

Griots worked best for me on my 370z. CG V series didn’t do much for me

Hey thanks for the video definitely give me confidence and using a v 36 andv38 that I have.

@diyhometrucktrailerandcamp4861

6 ай бұрын

V32 - v34 for serious scratches followed up with the V36 - V38 worked for me just fine.

whats your thoughts of chemical guys polish and compounds vs meguiars i have been using meguiars since 1986 , however i have bought a lot from the chemical guys but never these products .i think the chemical guys have great customer service and fast shipping from what i have seen and most of there products work great .

I always spray my pad with a little water helps stretch out the compound and cleans your pad

Great video, Brian. Have you done anything with the new 3D Cut and 3D Polish? Seeing some positive reviews on the updated formula.

@apexdetail85

7 жыл бұрын

Hi Rich!!! I will do reviews on 3D in the near future and sure am looking forward to it!!

I used all these chemical guys polish but I still like and prefer M100 & M102 Meguiar's it is very good Also Menzerna 400, I wish I could try 3M polish.

@apexdetail85

7 жыл бұрын

I completely agree Feras. As for 3M polish... will have a review for that in the future.👍🏻

Hi, do you apply pressure to the rotary polisher when using it? I have a SPTA brand rotary polisher but I heard they are not easy to use.

Great video i asked you about these products a few weeks ago glad to see you did a demonstration. In my opinion they dont compete with the AngelWax products you use, Im sold on the AngelWax products and or the Meguiars 105 205. Out of the two which one would you opt to first? Thanks again.

@apexdetail85

7 жыл бұрын

Angelwax, Wolfgang, Menzerna, QP On compounds are of highest quality to me. Cant go wrong with any of those. Megs products are right there... slightly below.👍🏻

Great video. I tried these out a few years ago on my zr-1 that I had on display at the Canadian Int’l autoshow. I used v34 and 38. They worked great and as expected. I had hundreds of comments over the week about the paint condition and shine. Most asked question was “which ceramic coating do you have on there ?” . 🤣 And I happily replied it’s a wax. I had used jet seal, glossworx glaze and then Celeste dettaglio carnauba on top. I used p40 spray detailer to keep the carpet dust off. 😎

Brand new Mercedes suggestion please: Came with dealer installed bird etchings and light scratching near each of them...and truthfully they don't seem too deep at all. I used VSS and it is the only product I have any experience with. It took out 80% of what I was interested in taking out. And it took several passes to even get that far (in my trouble spots). Results were great though. But I do plan on going back with something only SLIGHTLY more aggressive soon. Chemical Guys recommended V34 and then finished with V36 or VSS. However, V36 doesn't really appear to be the true "finisher" based on these videos. I'd be comfortable doing V34 then VSS, but do you think this will be the best course of action? I don't want to use anything too intimidating and I am potentially interested in getting away from that one step all together as I see the benefits of having specific products for specific jobs. But if you think it'll work I'm interested. For now, I'm interested in leaving well enough alone. But a follow up suggested course of action would be appreciated.

I recently did my Tesla s with v32 and v38. I’ll be completely honest and say that It was below 50 degrees outside and it was a rushed since I started in the afternoon and was trying to finish before dark. That being said it still did a surprisingly good job. I started off with v 36, then 34, then 32. I was surprised I could get that aggressive on Tesla paint, but scratches were bad. Can’t wait till the weather gets nice to take my time. I only spent about 3 hours on it. Took a road trip yesterday and the dirt barely stuck to my car. V32 did a great job but still some scratches left. Next I’ll try the meguiars to compare.

@prestonmartin308

4 жыл бұрын

chris ashley you are supposed to start at v32 and work your way up not the other way around

@chrisashley1550

4 жыл бұрын

@Preston Martin I did actually start with the V32 compound then used the finishing polish v38. I didn’t use 34 or 36 tho.

I too wash my car with the dark blue side of a dish Sponge.. Living life on the edge😈

What is your preferred line up for polishing. I’m almost out CG line and would like to try something new.

Would M105 have cleaned up all those defects or would it still need to be sanded?

What was that you sprayed to keep the cutting polish from drying? Just got the 4 step and a new polisher for Christmas. What you suggest for and older car like a 1966 ? Should I start with 36 ?

If you ever get your hands on The Last Cut Compound Glaze, you should do a review on it :)

@apexdetail85

6 жыл бұрын

Will do :)

I have a 2019 370z and it appears the clear coat is quite hard. V32 removes the minor swirls but can’t remove some of the more pronounced imperfections and very minor scratches. The scratches are not deep and I can’t feel them with my finger nail, so it’s disappointing V32 doesn’t work on those.

Do you like Wizards Mystic Cut better, then the Chemical Guys V line. I have used Wizards line, and it my favorite. I’ve never used V line.

Thank you for your very informative video; I have a question pertaining to "single-stage acrylic enamel " cut and buff process; I have all of the optical cutting &polishing compounds from the Chemical Guys- I also have a full array of "FARECLA COMPOUNDS&POLISHES;- In your experience which would you prefer to use to get the beast-high gloss swirl free finish-the cutting process went to 3000 Trizac wet; thank you, PATRICK.P

No priming the pad with compound?

I have 2002 Lincoln continental light Gray which Polisher should I use

Great review! Desktop detailers are the worst.

Great review. I think CG's take a beating on the forums because they make so many products that do the same thing, making it very confusing for the consumer. Plus, they sell a wax that costs $2,500 😂

@apexdetail85

7 жыл бұрын

😂😂. They do get carried away with re-labeling... but I think most of us are wise enough not to fall for that crap. But they are a healthy, profitable company... must be doing something right!

@tdawg719

6 жыл бұрын

The wax they sell for $2,500 can be refilled for free an unlimited amount of times

@someoneelse7724

5 жыл бұрын

tdawg719 whoop-ti-doo

@tdawg719

5 жыл бұрын

Someone Else just explaining why it’s so expensive. Fucker

@AlejandroRivera-ru8rn

5 жыл бұрын

Nick M yes i agree they make it confusing i went to their store a few times they had like 3 different compounds,polish,glazes i did try the compounds and work fine but yeah theres better ones.the jet seal works really good for me.as for the 2500 wax jar they sale its just ridiculous im sure you get the same results with any good wax.

Hello guys which compound the best for you (Cut and finish)

I’m with Jody and have read your response, but could you do another video showing in 8 sections - 4 on the bottom the way you did and 4 on top in a progression from start to finish. Thank for your time and great review.

@livingstones1196

4 жыл бұрын

He may have to charge for that

@muchachogrande2019

2 жыл бұрын

This is exactly what I would like to see as well. Not just a video of what the line of products can accomplish on their own, but an example of what can be accomplished by using them in a progression as well as switching pads. Not that he did anything wrong here, it would just be nice to see the full capabilities of the line beyomd a one step.

Do you use all 4 or just choose one

Yeah I really don't understand the hate on these products. They are not the best, there is deff. Better but for a higher price. But starting off these are great I beleive. These are the first compounds I picked up because they're cheap especially on this Amazon deal I got and because I used it and my video showed and prove that it work I got a bunch of private messages on my Instagram hating on me because they use them. I've had a guy post publicly on my pictures that I'm not a big detailer because I'm using Chemical Guys and using Harbor Freight polisher and not a Rupes. So I had to block them.

The final polish I have is watery. I contacted CG, one guy told me he couldn't help. Another customer service person ended up helping me. I sent pictures and they replaced the item. The replacement is watery to. It has no substance. It just absorbs in the pad. Did they change the formula? Anyone else have this happen?

Can I use the orange CG orange pad with this?

Looks lile v36 did a better job in my opinion. Questions is, whats the next step? Wax, sealer or both?

Who taught you how to use a rotary polisher ?

I bought this kit and as much as I wanted to believe in the v range the Results were terrible especially for the price, I use menzerna hc 400 and carpro clear cut and they both worked way better.

@apexdetail85

6 жыл бұрын

I completely agree.

I respect others opinion but M105 and M205 still working better than others brand. Menzerna is very good as well.

@apexdetail85

7 жыл бұрын

I agree...I didnt say it was bad at all...just dries too quickly and produces a bit of residue. I also agree with Menzerna...love it!!!

@lincolnjcm3198

7 жыл бұрын

Apex Detail yes man. Thanks for your videos, they are very helpful. I tried spray nine for interior as you did in another video and I love it.

@apexdetail85

7 жыл бұрын

Spray 9 is one of the best with all it can do! Glad it works for you as well! Cheers!

@danielramirez7972

6 жыл бұрын

Menzerna are great,but Gyeon works much better without any problems and using a small amount for each car

I have asked this directly to Chemical Guys, but I want another perspective. If I understood this correctly, when you do a buff and polish job and you want to apply a ceramic it is the last step taken; there’s no need to apply a wax or any other sealants after the ceramic. But Chemical Guys told me that the Hydrocharge and Hydroslick is applied after the V38 polish, then the Wet Mirror Finish, then Jet Seal, then Butter Wet Wax. Why all those steps after Hydroslick if that is suppose to provide the protection?

@justin94block

3 ай бұрын

Ceramic coating could only last so long and adding something onto prolongs the ceramic coating. It's like a barrier over another barrier.

Forgive me for stating the following but I'm trying to determine how this video has any relevancy whatsoever. Yes you can take each polish and use on a different section to show the "potency" of each but how does help demonstrate the finished product? Aren't each of these products to be used in succession of the other? This is like comparing 200 grit sandpaper to 300 grit then 500 grit then 1500 grit all on different sections without using them in order and then comparing to an area that hasn't been sanded. I can appreciate your time and effort that went in to making this video but surely as another detailing professional you can see this video has absolutely no relevance whatsoever unless it has been done in order on the same area. If I were to use 3000 grit sandpaper on a rough cut piece of lumber, obviously it isn't going to look smooth unless it's been planed then sanded with lower grit followed by gradual steps. Same concept. I'm amazed that I'm the only one who has noticed or mentioned this.

@apexdetail85

6 жыл бұрын

Jody Raymond you are amazed because you totally missed the point. Not your fault.. I should have been clear. The point is the compounds are horrible! The polishes are fair at best. If you do not practice strict residue control, the residue will add more work than it's worth. What IS shocking is how you do not realize that you cannot stay profitable and efficient when you have to blow off the pads after every pass because the product you are working with is repurposed, relabeled, rubbish! CHEERS!

@jodyraymond4451

6 жыл бұрын

Apex Detail seems valid. Thanks for the response!

@jodyraymond4451

6 жыл бұрын

I actually purchased the Chemical Guys V series products to use on my personal car as I haven't tried their products before. I came here looking for people that had used them for quick tips, etc. My apologies for my lack of understanding in the point of your video and my "abrassiveness" (pun intended). I have no allegiance to chem guys or any other brand for that matter. Was simply confused. I'll let you know how it goes.

@apexdetail85

6 жыл бұрын

Yes...I love the feedback!! and I apologize if the answer came off as smart ass. All I can recommend when using that line is to Practice the strictest residue control as possible. I personally suggest Wolfgang, Menzerna, Angelwax, or QP ON as compounds to use. They are residue free, stay wet under pad until the abrasives break down completely, and a little product goes a long way. In any case..l hope you project goes well!!! :)

@imtryingtosleep8935

4 жыл бұрын

@@apexdetail85 You are supposed to blow out the pad after each section regardless of what polish you are using anyways. Residue from V32/V34 is annoying, I can agree. But if you are applying sealant or ceramic the car needs to be washed after anyways to remove any residual polish for better adhesion. That being said, there are better polishes out there, but V series on 30% off, I wouldn't say it is a bad buy.

What polisher machine were you using here? I live about an hour in half from you

@jeepinspence

2 жыл бұрын

He states what it is in one part. It's Griots entry level tool.

Do I have to wax or seal after this is this stripping the clear coat on my car or damaging it beyond repair

@lamarlenhardt4766

3 жыл бұрын

It depends on you. Couple months is protecting or upwards a year protecting, but waxing 3 or 4 times a year. It's option s for you to try. No one way is better than the other only results and they vary.

Nice video. I've tried these and was not impressed considering how much they cost.

@apexdetail85

6 жыл бұрын

The Hybrid was ok... the fine polish decent.. but I agree with you

@cutweldngrind

6 жыл бұрын

I only bough the 36 and 38. I had lots of overspray and after claying car tried them. I do believe in need thr 32 or 34. Car is beat up bad.

Please explain what QED is, what its made of and where I can get it?? thx!!

@jasonfournier

4 жыл бұрын

Quick Exterior Detailer. You can buy it from a number of companies or make it with diluted ONR.

@NSZ-sb6kt

4 жыл бұрын

I've never heard quick detailer referred to as QED either.

Chemical guys is more for the enthusiasm than the professional

V23,v32, v56,b,27, g28, v28.9er v25.6.2 are my fav by chemical guys

How is this to be used ??? All combined or 1 of either according to owners preferences? Or is it up to the type of paint color or job? Let me know pls

Apex what compounds do you recommend?

@apexdetail85

5 жыл бұрын

Sonax Cut Max and Perfect Finish

Reference which to use: You have confused the crap out of me.

Mo only gripe with this video is that these are supposed to be used in sequence, not by themselves. You start with v34>36>38 and end up with glass finish.

@apexdetail85

6 жыл бұрын

I get the point....but how many corrections have the budget available to do that many steps>

@livingstones1196

4 жыл бұрын

@@apexdetail85 I guess it all depends on the severity of the paint. I'm not an expert but if paint has been neglected for years it is only logical that any kind of correction will take many more steps than paint that has been cared for.

@DG-888

4 жыл бұрын

As far as pads its orange, white, then black right?

@jeepinspence

2 жыл бұрын

@@DG-888 yes

How much does it cost for paint correction on a mid size coupe?

@livingstones1196

4 жыл бұрын

It depends on the condition of the paint. Good paint=$300, Moderate paint $400, Bad paint $800-$1000. But I'm just guessing...

F11 this is no Joke

What does QED mean/stand for?

@DJxSlacker

3 жыл бұрын

Quick Exterior Detailer

Alright so I ordered them never used them but do I use them in order from 32,34,36,38?

@apexdetail85

6 жыл бұрын

It would depend on what you are working on Daniel. For example... you could cut defects with the Hybrid (34) then finish with 38. I would play with them so to speak to get used to what they do. Then after a while... you can walk up to a car and quickly decide which combo would work best. It is rarely necessary to use all four.

@RB54DaBears

6 жыл бұрын

Like Brian said v36 works great as a one step. V36 with a medium foam pad works great for me as a one step

@kylemoore9626

4 жыл бұрын

I use the 34 then 38 on Harley’s. works great.

I understand what the purpose of the video was but layering the product would show a better result on that paint. Also your lighting was very low. It’s difficult to really see what is going on with an old fluorescent bulb. Thank you for the video. I to have tried this product and no, it’s not my favorite but I could get a much better result from it and I don’t know what I’m doing. You’re a pro your results should have been much better.

My wifes car is a worse case scenario, what compound you recommend ?

@apexdetail85

6 жыл бұрын

Sonax Cut Maxwww.sonaxusa.com/sonax-cut-max-cutting.html?Bengine&gclid=Cj0KCQjw_ZrXBRDXARIsAA8KauTeAoa-C4U_ODIDn1rxbS8u7xryoMNFOAqmwNpT07gkeKRUBS3szy0aAtBzEALw_wcB

Put an inch of water in bucket and itll catch even more dust

You’re suppose to use each product on each panel. That’s how they are designed. Start with 32 then 34 then 36 then 38

Whats a qed?

@Calabrese1966

2 жыл бұрын

A detail spray, a quick detail type of spray.

Some of the worst compounds on the market. V36 and V38 are fine, but there's better out there.

@apexdetail85

6 жыл бұрын

Totally agree!

@daves.3278

6 жыл бұрын

I agree Mike! Like you said before FFC and Sonax Perfect Finish are the best!

@phantombigballs8165

4 жыл бұрын

Well. I'm what you would call a weekend warrior but consider myself pretty experienced... I have a well paid job so can't detail full time. I used CG products for a while now (UK) and recently entered a detailing competition coming first at a classic Ford meet on my 1990 escort RS turbo. I found that used right the V range worked extremely well and produced a perfect finish. 👌

just use v36 and v38. that works for me .

@apexdetail85

6 жыл бұрын

Agreed👍

I don't like their v line polishes. I even prefer retail compounds like ultimate by Meguiars.

@apexdetail85

7 жыл бұрын

The 36 and 38 polishes are the only chemicals at all that I dont mind. I agree with you👍🏻

I think u should’ve watched their KZread

You are doing it wrong. You supposed not to use the same pad for all of them.

This doesnt show the result of the compound.. we need to see what it looks like after all 4 steps.. obviously after applying only compound it wont look as good as the polish.. the compounds not suppose to make it shiny.. lol its the same as wet sanding a panel and blaming the sandpaper for not making it shine lmfao

I tried all these products. They are garbage. I couldn't get it to polish anything. As soon as used Meguires, boom, instant shine and scratch removal.

V32 is garbage. I've used it on my 97 Supra a couple times, with very mixed results. DA Correction Compound from Meguiars is FAR superior. M105 I would consider the equal to V32, and it's a far superior product. I'm slowly learning that Chemical Guys is a lot of marketing, and not all that result driven.

What is QED? Speak English. We’re not all pro detailers.

I am not the biggest CG fan but the test areas are way to large. If you aren't following manufactures directions you cant expect the product to work well. I have used the products and they can work well but at the same time not well enough. This unfortunately is a bad representation of this product. I have used other products I think is much better but you can trust this type of review.

You remind me of the Democrats in Congress.