I've had Hasbro Consumer Care completely replace Transformers figures in the past when I've complained about faults(Not even breakage ) and they send me new figures sometimes without even sending back the faulty figure. Who knows ? May be they would do the same for Beyblades ? Although I am wondering if they would , since the nature of Beyblade is they are more likely to break than an action figure because of the forces invovled in battle. Well if they are serious about bringing BeyBlade back , I hope they have decent consumer support on getting replacements when they are at fault , like they do with their action figures.

@UnshakableThug1

7 ай бұрын

I never knew this about Hasbro, That's crazy. This does lift my hopes for a better beyblade X! Btw sus name 😂

Honestly this generation needs more planning and time if it is to be efficient in the long run. Another issue with these X beys is that their tabs which lock onto the ratchets can break a shitton and stress a lot.

@UnshakableThug1

7 ай бұрын

Oh yeah! I saw a tab break once in a video and now that i'm looking at my knight shield i see the stress marks 😭😭

@RyujinSaviorX

7 ай бұрын

@@UnshakableThug1 zamak metal and high speed battles do not mix my guy.

@UnshakableThug1

7 ай бұрын

@@RyujinSaviorX Damn, how did you find out the metal that's used???

@RyujinSaviorX

7 ай бұрын

@@UnshakableThug1 friend’s family who works with metal can identify the types. Its literally the same metal used for MFB as well

@UnshakableThug1

7 ай бұрын

Cool! I guess this is another way metal fight came back 🤣

As a wise man once said “The game’s the game.” Thankfully all the resellers I’ve encountered maintain a supply of individual bits and ratchets.

@UnshakableThug1

7 ай бұрын

Ye it would be hard for me to be an X consumer without resellers selling parts. I want to buy 2 point bits and a LeonClaw blade but Premier doesn't want to sell them individually yet 😔

@TheBoss42x

6 ай бұрын

What website do you use?

With metal on metal and such high speed fights its bound to happen

Durability is a major issue with this gen. I know stuff is gonna phase out as it gets outclassed but it makes me feel uneasy about the series.

@UnshakableThug1

7 ай бұрын

I hope things don't phase out, and to me it seems like parts like flat and ball won't be obsolete to the gear bits, hopefully.

@danthewildbirdman

7 ай бұрын

Some parts will and others won't. Some parts are almost always good but if you look at the progression of the series the first set of parts usually don't stay competitive as they need to sell the new stuff so they make it better than what we have now. Which is exactly why we need part packs like you said. Or heck, even put an extra bit in the pack so that if it breaks the bey isn't unplayable!@@UnshakableThug1

@UnshakableThug1

7 ай бұрын

@@danthewildbirdman Well said!

One thing to help its burst resistance is to take off the bit first, then the ratchet. The ratchet would last a lot longer, and that goes for all types.

@UnshakableThug1

7 ай бұрын

I do that, but the main issue with burst resistance and rachets is with the rotating plastic outer ring because when it gets beat up in battle, it bends it out of shape and makes it looser. There could be an internal issue with rachets, but i dont know, and the beys burst from force being applied to its rachet bumps.

@BrodyG-uv3nq

7 ай бұрын

@@UnshakableThug1it’s actually the white part of the ratchet. Iit bends and losens over time if it bursts too much. Try taking the ratchet apart and straighten the white part un and it should prevent it from bursting a lot

@UnshakableThug1

7 ай бұрын

@@BrodyG-uv3nq I'll try that!!

@BrodyG-uv3nq

7 ай бұрын

@@UnshakableThug1 nice. Just be carefull and avoid using a lot of pressure. Dont want it to break😢

@Sgt.chickens

6 ай бұрын

​@@BrodyG-uv3nq hopefully they fix this in the future. Adding some metal to the inside of the ratchet should help

how to overcome this. buy fake beyblade at 3 dollars get spare parts.... OR cast in resin the parts to get extras.

That is the issue with all metal beys. This series feels more like collecting more than playing

@UnshakableThug1

7 ай бұрын

Gaawwd 😭 you're not wrong

@UnshakableThug1

7 ай бұрын

@@marcamusprime9513 I wonder what the innovation could be, but i like the simplicity of the designs. Also, so far 2 of my blades have broke and i got to say it's a headache since i used them as training dummies, so they've had lots of use and now i gotta replace them.

@giovonniiclayton

7 ай бұрын

especialy with burst plastic

@luce3

5 ай бұрын

Even when collecting the designes themselfes are preety bland and sometimes boring, the bits especialy, since you cant make one with a cool gimick since the required height for the whole xtreme dash thing to work, so stuff like z achillies driver is literaly impossible to recreate in x

Goes from broken parts to habro bullying and I’m with it

@UnshakableThug1

7 ай бұрын

Hasbro had it coming! 👿 They better deliver for X❗️

@Beyond_Beyblade

3 ай бұрын

I have good news

Don't forget the string launcher also problematic. The gear is always stuck.

@UnshakableThug1

7 ай бұрын

Dang, i don't use it 😂

@UnshakableThug1

7 ай бұрын

@@SilverFlame. I'm a tournament player so i stick with authentic parts. It's also in tournament rules that your parts must be from official sellers. That sounds interesting for fun tho

@UnshakableThug1

7 ай бұрын

@@SilverFlame. The thing about X is that if you play constantly your parts are eventually going to break. I know 3 of my tips broke from complete luck in battle, and 1 of my knight shields and wizard arrows have actual crack breakage in their metal.

Interesting.. Its seems like i've dodged most of these issues so far. Im pretty sure Hasbro uses softer plastic so there wont be as many breaks like this.

@UnshakableThug1

6 ай бұрын

Ye, we await Hasbro's take on X! Hopefully, they will watch X content to be better than TT and will implement the battle pass, but that's wishful thinking 🤣

@strangermax2245

Ай бұрын

i believe most of the bit breakage is from very new beys where the bit is stationary rather than rotating with the gear chip as a means of protecting both the bit and the bey’s spin when it hits the xtreme line too fast or harshly, i usually give new ones soft launches to break them in so that the feature works properly and with that all my bits are fine so far

Beyblade x goes in hard shredding hasbro plastic

Lore accurate beyblades

4:51 Damn, you hit the nail on the head buddy! plus the other proposals you made 🔥🔥🔥🔥

@UnshakableThug1

7 ай бұрын

I try to keep it 💯🫡

With every single KnightShield blade I own, I noticed that my string launcher tends to shake about 95% of the time I launch a beyblade with said blade. This doesn't happen with other blades. I fear that launching KnightShield enough times will cause the launcher to break.

@UnshakableThug1

7 ай бұрын

That's strange. I only use ripcord launchers, and i dont think i notice anything weird with KnightShield. I personally think you dont need string launchers in X tho.

@BeybladeASMRreviews

7 ай бұрын

Knight shield is an off balance blade to balance its roundness, the shaking, for me anyway, hasnt damaged my launchers, ripcord or string, its just smth thats mildly annoying

i died at the angry parent impersonation 🤣

@UnshakableThug1

7 ай бұрын

I'm glad 🤣, i hope it wasn't too cringe.

I can see them tying to reinforce parts with high breakage rates with metal

You know if TT is having this problem imagine Hasbro when they release theres

We got robbed of zero g season 2

@UnshakableThug1

6 ай бұрын

I heard it didn't do well in Japan. Rest in piece, Zero G🪦

*you need to buy multiple beys!!! 1. Training/Practice bey 2. Staples bey/parts 3. Tournament bey 4. Collector bey 5. Repeat 💸💸💸💸

@UnshakableThug1

7 ай бұрын

The beyblade cycle 💀

💯🔥🔥🔥Great video! thanks for sharing your broken parts and stuff, not enough beytubers showing there's but i've heard a little about the breaking issues. i really hope hasbro makes good stuff (all the way through the generation)

@UnshakableThug1

7 ай бұрын

Thanks for watching! This needs to be shown more and breaks happen to me the most since i play and lab combos ALOT because i go to tournaments frequently. and hopefully Hasbro does go crazy, but i doubt it 😓

@Beyond_Beyblade

3 ай бұрын

Okay breaking is just unlucky, i had a bit break because i launched directly on top, not because of its weakness. I use my beys every single day every second. And after that incident, i learned and it never happened again. Just my experience, you seem to be uber unlucky

Hopefully Hasbro can improve this

@blueblaze7312

6 ай бұрын

But couldn't that theoretically mean Hasbro was right all along to make the beyblade burst season 3-7 plastic instead of metal? And we hated them for that?! Because if metal and high speed can cause such fat damage to the point where we can be anime villains and LITERALLY break beys beyond repair...

@Beyond_Beyblade

3 ай бұрын

The removed all gimmicks and fun not just metal also all metal was hidden behind plastic so it doesn't matter

Beyblade X needs less recolor's and more unique designs.

@UnshakableThug1

7 ай бұрын

True, i would say 3 is enough but Wizard Arrow has like 5 now 💀

@makinyoumad9498

6 ай бұрын

Metal fight had lots of recolors

@UnshakableThug1

6 ай бұрын

@@makinyoumad9498 If you combine Hasbro and TT sure, but in Hasbro recolors were low while TT had many

@makinyoumad9498

6 ай бұрын

@@UnshakableThug1 Same with Burst gen

One quick problem I always had with X is, how are they gonna expand on it? In Burst just by the designs of the beys alone there was a ton of room for expansion. Adding gimmicks to the parts, layer changes, disc frames, so on so forth. But the problem with X going back to basic designs and one big gimmick, while refreshing, holds back what they can really do with it in the future. At least how I see it.

They really should have gone with Mattel instead of Hasbro. Mattel revamped Megablocks into Mega Constructs with plastic and chrome plating and prints that are better than lego is. They'd be able to make plastic better than Hasbro. But since Hasbro has history, Hasbro probably just said something like : "Hey beyblade since we know each other so well, I'll do it this cheap"

@UnshakableThug1

7 ай бұрын

LMAO, it seems like any company that cares will have more credibility than Hasbro. Too bad TT doesn't care..

Oh no my flat recently became less flat, hopefully they fix these wear issues do to constant high speed impact with maybe better materials in the long run

I think beyblade x is pretty cool but unfortunately the beys seem like theyre fighting against the stadium more than each other.

@UnshakableThug1

6 ай бұрын

It be like that sometimes. If you optimally launch each bit, it will reduce how much the stadium sabotages you!

I couldn’t get into burst or X because of these same concerns and I’m sad to see that they were founded. The durability of metal fusion, metal masters, etc. is legendary and I know because toys I played with as a kid became legitimate competitive tools for me in tournaments later on. I still have my original earth eagle, TT gravity destroyer, and hasbro meteo L drago

They should have stuck to hybrid, 4d and zero-G designs tbh. The burst feature while looking cool, makes the beys more prone to wear and tear. I mean, the only way to burst a metal saga bey was to manage and break a facebolt while it was still planted in there.

If there molded that’s a big problem molded metal breaks easier than say hand made or forged

I mean when the bits are made of plastic and the main gimmick is to have the tips eat at the corners of the stadium its no wonder their breaking so easily, also as much as the burst gimmick was fun for its time I just wish it wasn't in this generation period, the bursting is fun for the moment, but as time goes on it becomes a major problem for people who don't have the money to constantly buy replacements

@UnshakableThug1

6 ай бұрын

Yeah, im noticing my rachets get loose over time, to the point they shouldn't be used in competitive. I've disassembled them to try to tighten them, but it seems impossible unless u alter them. Even more reason to have part packs.

Now I don't wanna test battle my hell's scythe...

@UnshakableThug1

6 ай бұрын

Oh man... just to reassure you, my HellsSythe is broke! Chips of metal are gone, and there's big crack down the metal, which is why i have beys i train with and beys i use for tournaments!

bro with hasbro i got my chain incendio, green arrow wizard dual pack and my high taper broke within 4 battles. The tip is know a tyranno beat rip off now 💀

How to fix Beyblade X: Play metal fight

The metal blade on my BX-07 dransword broke in half somehow recently, still surprised about it

@UnshakableThug1

7 ай бұрын

That's really unexpected and sucks 😦 . My BX-17 Wizard and BX-14 Knight broke

TT became Hasbro

I think this is largely bad luck. I still haven’t broken a part. I expect to have to replace things in the future but so far at least for me everything has held up fine.

@UnshakableThug1

7 ай бұрын

It is definitely bad luck for bits, but i play a lot, and so far, i have about 7 broken bits and 5 broken rachets. I should mention i deem a part broken if i wouldn't use it in a practice setting, which would be broken rachets and rachets that are too loose from battle or bits with big scrapes or how they were broke in the video.

@nizumablader

7 ай бұрын

@@UnshakableThug1 yeah I think maybe I have a couple 3-60 that are getting close but thankfully there’s so many recycled ratchets in releases I’m not super worried about it. But also beyblade is one of the few battling hobbies outside of Japan and for whatever reason there is expectation to never have to replace parts. I think if you look at it like mini4wd or any other competitive hobby like this it kind of puts it into perspective. I just expect that I will have to replace stuff.

@UnshakableThug1

7 ай бұрын

Ye, maybe TT knows this and just wants us to buy more beys, but i think it would be more profitable to make rachet&bit part packs.

@nizumablader

7 ай бұрын

@@UnshakableThug1 maybe they’ll do that

I didn't get anything this heavy, but one of my buts was hit by a blade and has a dent now, it's incredibly bad for lad

@UnshakableThug1

7 ай бұрын

I feel ya 😭

My biggest issue with beyblade x is the fact that I just got back into beyblade by coming across a bunch of clearance quad strike beys, and in order to adopt the new style of bey, then I need to obsolete my brand new (albeit not the greatest) tops. I do have a few Takara Tomy beys and a pro series as well.

@UnshakableThug1

7 ай бұрын

Welp, Hasbro screwed you over for releasing the final batch of burst while X is going on 🤦‍♂️💀. TT was already done with burst.

Hasbro use weak plastic that's what happened with Burst Pro and Metal fight😊

@UnshakableThug1

7 ай бұрын

Ye i remember my Hasbro Rock Leone Energy Ring breaking, and i feel like the WD tips would shave off after awhile, while my TT WDs stayed sharp. Also, i saw that Hasbro Metal Fury lacked mode switching, among other issues 😒

@phantomV630

7 ай бұрын

@@UnshakableThug1 Yes hasbro be lazy. But sometimes they making good and bad, Look up Metal Fury Hyperblades just like Burst Pro Series.🤔

@BadDragon420

7 ай бұрын

​@@phantomV630ye true, kinda sucks tho, some call it a round 2 cash grab 😔

@RyujinSaviorX

7 ай бұрын

@@phantomV630 and legends

@UnshakableThug1

7 ай бұрын

Oh yeah, i remember my legends galaxy pegasus' rubber tip was too hard to flower pattern, so i wonder if it was plastic LOL

I get the breakage thing but it’s bound to happen with the new gimmick. Plus since the big thing about this gen in that it’s “burst and metal fusion combined” it makes it more likely. I get the frustration though since a lot of these beyblades are genuinely expensive. I bought myself two but haven’t tried them yet so I hope this type of thing doesn’t occur since without the launchers and just the two booster boxes (1 beyblade per box) cost me 40 bucks.

@UnshakableThug1

Ай бұрын

Ye at least hasbro is finally here

Metal Series was peak Beyblade.

Can anyone tell me what game is being played on screen?

@UnshakableThug1

4 ай бұрын

Valorant. Just as a warning, i think you'll enjoy Apex Legends more.

Honestly I really havent had any of these problems. Mine have been unintentionally launched on floors, hit on walls, and nothing has broke so fa. The battles are fun as usual and i rlly enjoy it. Tbh what ya’ll probably get are first batches, which normally have the most flaws. I wait a couple of weeks till i get mine. I wouldnt say this is happening to mostly everyone either. Some plastic can get weaker in different temperatures, and from experience, break easier in smaller stadiums. However, school and other activities keep me busy so i rarely use them.

@UnshakableThug1

7 ай бұрын

Does Takara Tomy strengthen batches in X? I do play X A LOT so i think breakages like these will just happen eventually to everyone. My bx17 wizard arrow broke yesterday and its the bey i mainly use as a training dummy so im not surprised, i also notice there were cracks in its blade. I posted the damage in a recent community post.

@BrodyG-uv3nq

7 ай бұрын

@@UnshakableThug1 well that’s rlly how products like these actually work. Some batches may have abnormalities due to improper molding of the plastic or even the metal. Air bubles could get stuck, therefore making it weaker. It also happens with transformer products aswell.

Tbh its natural thing to happen like not just Toys but to all products and machineries will at one point break and ended up having to be repaired or replaced with another. Same thing goes with beyblade like it will have dents because we launched them hard enough and they clashed into each other at HIGH speeds like dont be suprised because there WILL be damages or worn out on their parts after we battling Edit: Products will break, you saved up money to buy a replacement. if Money is concern just go get part time jobs and learn to save your own money

@UnshakableThug1

7 ай бұрын

Yeah, I'm not saying breakage can be fixed, but TT and Hasbro need to alleviate it by making parts affordable and obtainable

@giovonniiclayton

7 ай бұрын

no one is saying beys should be unbreakable for a million years but to have parts breaking this fast is a problem and with how the economy is right now people cant afford replacement after replacements and even if you can at that point money is better spent else where on different hobby's

Time for full metal!

The same thing literally happened with my DranSword 😭😭🙏🙏

Unlucky... haven't had any problems with mine... had them for weeks now

honestly if this situation is not resolved in the future ill just buy a fake beyblade x since they are cheaper 💀

@UnshakableThug1

7 ай бұрын

LMAO cant blame ya

@BladerKev

7 ай бұрын

@@UnshakableThug1doesn’t MQ contain zero lead now?

@UnshakableThug1

7 ай бұрын

@@BladerKev I wouldn't know since i don't buy midfakes, but I would like to know how they compare.

@user-vl8ck4gz6w

27 күн бұрын

Isnt a beyblade x only 8 dollars tho?

More beyblade batles with memes that was sooooooo cool

My problem is how loose the damn launchers are for being so powerful As someone who only owns Leon claw im scared it took me a while to get Leon claw

@UnshakableThug1

6 ай бұрын

I've had Leon Claw for a while now, and it seems to be sturdy, so dont worry about replacing it!

Actually I use fake point bits in local tournaments

@UnshakableThug1

7 ай бұрын

👏 Mods! Crush this guy's fake point bits👆 💫 (lowtiergod reference)

My needles dent so easily, just one heavy hit that gets them out of the stadium and the sharp ain't sharp no more, one turned into basically quake from burst

@UnshakableThug1

7 ай бұрын

Ye the beys can land out the pockets hard. I play on a carpet, do you?

@fencer0Z

7 ай бұрын

@@UnshakableThug1 I play on a table and have no carpets at home, they sometimes end in the other side of the room with really big hits

@UnshakableThug1

7 ай бұрын

@@fencer0Z damn, would reccommend buying something flat and soft to lay your stadium on. There are gaming mousepads like the aqua control plus that have a size of 500mm x 500mm and 4mm of thickness, which makes it softer and it fits under a stadium and is far better for your parts to land on.

@fencer0Z

7 ай бұрын

@@UnshakableThug1 the problem is they don't just get out of the stadium, they literally fly to the other side of the room

@UnshakableThug1

7 ай бұрын

@@fencer0Z ye it happens. If you can, i would play on the floor to lessen fall damage and buy a soft surface to have under the stadium pockets

I was fighting my friend and his low flat just chipped offed but from my battles and his our beys don’t actually break

@UnshakableThug1

13 күн бұрын

You have to play enough and maybe with more strength to see these breaks happen. I know at a tournament, someones blade broke mid game.

I just bought my first set of beyblade x beys…. Now I’m worried

@UnshakableThug1

6 ай бұрын

Say goodbye to ya money 😈💸

The BIGGEST PROBLEM in this video is the sound effects that are way too loud. Still a good video nonetheless

@UnshakableThug1

7 ай бұрын

Ah damn 😂, i know i made the glass shattering sfx loud on purpose, but were the beginning sounds too loud?

Another update on beyblade x durability, my leon claw launcher broke and another hellssythe blade of mine broke and launcher grip and my brothers wizard arrow is broken. I’m starting to consider quitting Beyblade

So basically Beyblade X's biggest problem is Beyblade Burst... Very funny, but I agree. Burst should've never been a thing.

@UnshakableThug1

6 ай бұрын

No, i actually like the burst mechanic. It's a buff for attack types, and it's silly! The problem is how fragile the parts are and there's no part packs to replace them!

This is why we need metal sega coming back

I literally have no problems a couplecracks but thats expected

@UnshakableThug1

6 ай бұрын

Trust me, cracks get worse 😞

I think burst should of continued its not as competitive but can be if people still want it to be and also the designs look amazing

@UnshakableThug1

6 ай бұрын

I wish everyone could have their favorite gen, but i have the opposite opinion of burst designs 😭

Yeah... thats what happens. I am super excited for this... not anymore 😢 I am a broke ass adult and i was so close to splurging on this on my credit. Thank god this video showed up. Thanks. Maybe when i am less broke and have extra cash. Waiting for that christmas bonus...

@UnshakableThug1

7 ай бұрын

I'm glad i helped 🤠 👍

@NatalieRath

7 ай бұрын

@@UnshakableThug1 thanks! I am super tempted but yeaaah unless I got extra moolah. Sadly not for now 😢

LMAO the GG references. Who do you main?

@UnshakableThug1

5 ай бұрын

SOL BADGUY 😂

To be frank tho i don't expect the beys and parts to last forever with the speed and crazy design and part breakage happens with all Gens. Yeah part breakage does suck but their not a new issue. You know? While adding durability to anything is a good thing and only adds benefits they are eventually still gonna break with the crazy speed and recoil of X.

@UnshakableThug1

6 ай бұрын

True, this is the most Xtreme (I'm so funny haha) breakage I've expirenciend, but TT should've at least made part packs if they knew this.

@marcusgray3792

6 ай бұрын

@@UnshakableThug1 Fair point

Snapped parts are exactly why the burst mechanic shouldn’t have returned. We already have a new way to score points with extreme finish, so there’s absolutely no need to include childish burst finishes. It just adds another facet of pure luck which beyblade absolutely does not need.

@UnshakableThug1

6 ай бұрын

I feel like the 1 upside of burst is that it's a buff for attack types, and trust me, it comes in clutch in tournaments!

Never in my life have I seen this happen

Attack bits have more burst resistance than defense or stamina, even after wear. The fact that they're so tight is new to compensate for the wear. IDK how your bits got broken; they should burst if they get hit too hard to avoid damage, or you have gorilla strength or something

@UnshakableThug1

23 күн бұрын

I'm not even a strong guy but this type of breakage has also happened to me in tournament.

@gejuntian

23 күн бұрын

@UnshakableThug1 you can get 3d printed bit replacements, I would just superglue it. I have about 20 beys haven't happened to me yet. Maybe a bad batch

Burst Was so Good can they please just continue Burst The battles were epic and the beys didnt break every two minutes

another problem is the battle length. every battle last like 15 seconds and then ends. what???

@UnshakableThug1

7 ай бұрын

LMAO, so true. But it makes tournaments faster, so im not complaining

@makinyoumad9498

6 ай бұрын

That's actually better, in burst era 2 minute defense/stamina battles were soo annoying

@makinyoumad9498

6 ай бұрын

And honestly 10-20 seconds is just enough for a bey battle

Come on now, we want the lore acurate beyblade battles, beyblade destruction is a feature

@UnshakableThug1

6 ай бұрын

Lol, im imagining a blade shattering mid battle

@bernardoalbano1816

6 ай бұрын

@@UnshakableThug1 that what I want to see, like when in the show the beyblades crack

when Hasbro Quad Drive beys are More durable than Takara Tomy's offerings in the fancy new Beyblade X...

They won't do parts like you mention, as that's how they get ppl to mass buy those booster packs for the prize bey and the parts. think back to Burst series, how many spammed so they can get their hands on Atomic etc very strong part, if they can just buy atomic directly no one will buy the boosters

@UnshakableThug1

7 ай бұрын

Yea, that sucks 😔. Gacha just couldn't stay out of the only toy series i like 😭

@UnshakableThug1

7 ай бұрын

Although currently theres no part in X that i view as highly sought after. Kobalt Drake is the rarest part, but i dont think it's an amazing part, despite the performance I've seen when Zankye put Rush on it, but i know i dont need it to win a tournament, as I've went to 3 and got 2nd place twice. So currently, i dont think any part is amazing enough to be in a gacha.

@Bersilus

7 ай бұрын

@@UnshakableThug1 we can only hope. At least for once the stadium design favours attack type. It's been hard for attack types for so long

@UnshakableThug1

7 ай бұрын

@@Bersilus Ye man, this is the best attacks types have ever been. I run them in tournaments and do great! Plus they're fun.

I stopped using my rush cause you can’t buy the bit by its self it’s annoying

@UnshakableThug1

7 ай бұрын

Ye i feel ya, i want a point bit 😔

i think at this point we could probably rely better on 3d printers honestly

@UnshakableThug1

7 ай бұрын

Just imagine. The surprise BX release. The Takara Tomy 3D bit and rachet printer 😂

I've seen people 3D print these bits. I don't know about their performance tho.

The hasbro pro series was allright. Maybe 1 gram or 2 off weight but Maintains all features and gimmicks. It was the non pro series that had a complete lack of all gimmicks. Hollowed out parts and No teeth for bursting, The pro series was "worse" than takara but it was basically the same Mold using a slightly different plastic which i presume was cheaper

A great plea bruv well done 🙄🔥🤟🏽 content

lol, Takara tommy be like: "you want specific parts? here gacha it yourself at the booster pack or buy the same bey" either way its more money for them

@UnshakableThug1

7 ай бұрын

TT be on that pack fr 🚬

they fr just need to make the metal saga again lmfao

wait a second so TT is not going worldwide? its still hasbro?

@UnshakableThug1

6 ай бұрын

Yep, still hasbro. They made an announcement.

@sharkpyro93

6 ай бұрын

@@UnshakableThug1 guess i can order TT stuff now, at least they are cheap this time

They just need to bring metal fight beyblade lol

Takara tomy should stop and remanufacture old plastic beys

@UnshakableThug1

7 ай бұрын

LOL

They should’ve just continued Burst until they found a way to create stronger parts that can handle the extreme speed of Beyblade X

Most of the time they break because people choose to battle them againts metal fight beys or just freaking rocks

@UnshakableThug1

6 ай бұрын

LOL. I heard someone broke their burst tip cause they used it on concrete 😅 but so far 2 Knight Shields, 1 Wizard Arrow, and 1 Hells Sythe have broke for me, and it was just plain battle wear. I noticed that the breaks start as cracks and then as you battle more, the cracks become bigger so every X blade is a ticking time bomb for replacement, but it seems attack blades are more sturdy cause their metal is thicker.

@makinyoumad9498

6 ай бұрын

@UnshakableThug1 You shouldn't launch them too hard, sometimes launching them with less power gives you the win

@UnshakableThug1

6 ай бұрын

@@makinyoumad9498 I don't know about that. Stamina is important for all beys

W guilty gear references

@UnshakableThug1

6 ай бұрын

U a real one ❗💯

Good video

@UnshakableThug1

7 ай бұрын

Thanks!

everything was fax in this video, need to spread the word

Wdym bro your beyblade is just evolving, trust the process

@scrumt9284

27 күн бұрын

At least the bit and blade lol

My experience with X they’ve been really durable I call hypocrisy to judge x durability on rare breaks but give burst a slide when it has the worst durability compared to other gens

@UnshakableThug1

7 ай бұрын

Well, the breaks i have aren't rare. The bits in my video all broke within a few battles of use and 2 of my 4-80s broke in the same way. But yea burst has worse breaks but i'm not a burst fan anyway.

@giovonniiclayton

7 ай бұрын

@@UnshakableThug1 dang that sucks man takara tomy really needs to fix the durability for beyblade x in general I'm glade it is not as bad as burst but still also three of my x beys just broke so now I'm rethinking my investment in this new gen,because I'm not trying to relive the amount of money i wasted on burst

@UnshakableThug1

7 ай бұрын

@@giovonniiclayton Jeez, 3? I'm sorry for your loss, this ge nis expensive. So far 1 of my Wizard Arrows and Knight Shield Broke, so i'm expecting they have issues that will lead to them eventually breaking. I notice my Wizard had cracks in it.

I know this might be seen as a SIN, but have you ever considered trying out KO Beyblade X? It would be interesting to see if they are worse, on par, or even BETTER when it comes to durability.

@UnshakableThug1

6 ай бұрын

I have never heard of this way of play, could you explain it?! I'm guessing it's using X in bb-10s?

Yo this needs to be fixed...

This is why I’m buying more than one of the same Beyblade

@UnshakableThug1

6 ай бұрын

Same here!

Unshakable thug can i have all the beyblade x beys

low-priced toy who wear faster...not a big deal. Plus i prefer if they wear and break, it adds that touch of realism to the game.

@UnshakableThug1

7 ай бұрын

Ay bro, i would like to keep my money lol. 3 of my blades have broken so far.

@Average.lifter

7 ай бұрын

@@UnshakableThug1 in japan u spend 7€ each…I bet you bought them at a HUGE reseller rate, so do not blame a 7€ toy that break

@UnshakableThug1

6 ай бұрын

@@Average.lifter I did point out that Japan is much cheaper, but even then some parts are in gacha packs, and that alone is bad, but it's worse with breakable parts

@Average.lifter

6 ай бұрын

@@UnshakableThug1 clearly with the prize beys you need to be extra careful, but i like that. Displaying cobalt drake or fight with him ruining it...i like that materialistic dilemma

I just decided to make a custom gear stadium to play with me and my friends and so far most of em has lasted for a looong time especially The first four beys

@UnshakableThug1

6 ай бұрын

Sounds fun! Yesterday my friend came over out of the blue and we played and after i had to order another Rush and Flat bit 🫠

Metal Fury remains the best beyblade series. It’s peak beyblade and it’s not going to get before than that

@UnshakableThug1

7 ай бұрын

I gotta disagree. X is the best gamewise, but MFB is the best in art and nostalgia. But i do think if X wasn't here, the hybrid wheel system is peek.

@sleepycCh

7 ай бұрын

@@UnshakableThug1 I dunno. I prefer the simple stop spinning or arena out loss conditions. And I’m not too fond of broken parts.

@makinyoumad9498

6 ай бұрын

Hmm NO

@UnshakableThug1

6 ай бұрын

@@sleepycCh Understandable. Even in X bursting is mostly luck but the game balance in X is nothing like past gens, which is its main interest to me, so i'm fine with buying parts if their affordable. For example, Flat beats stamina tips, while Taper, which is X's Semi Flat, can beat stamina tips but is weak to stamina and is far better at beating defense.

They should just bring back metal fight cause they are clearly running out of gimmicks

Didn't it cost a lot Ya I don't I think it's worth the price

Bitgate.

Soo Hasbro has the less durability?

@UnshakableThug1

Ай бұрын

This video was made before Hasbro made X. So far it looks like Hasbro is good.