I would recommend a gun with three barrels arranged in a triangle that all fire at once as the Jedi can only deflect up to two at a time

I would recommend to bring a electro staff with a baskar rod so the jedi or sith could not cut it in half and breathing tubes to prevent a sith from choking you like cad bane with this precaution

@Spacewizard54321

2 жыл бұрын

That’s why he had breathing tubes?

@Spacewizard54321

2 жыл бұрын

@@Mileschad I thought it was his species couldn’t breath oxygen

@shaunhaas4784

2 жыл бұрын

The force can still snap your neck

@JQuizzler

2 жыл бұрын

Why force choke someone when you can crush their neck causing internal bleeding and severe pain, even if they have breathing tubes.

@kowidewd3363

2 жыл бұрын

Besagt isn’t fully invulnerable, just very resistant. So the fight would have to be quick

The Fulcrum sabers (Ahsoka's) I think are amazing. Lots of Jedi/Sith have dual sabered before but due to Ahsoka's being of two different lengths, each having its own speciality makes them unique and one of a kind.

@minicle426

Жыл бұрын

Filoni giving his pet character special treatment.

Thanks for the info! Gonna be super useful for the big fight tomorrow.

Actually in Star Wars Jedi: Fallen Order, Cal Kestis can use Force Stasis to slow rockets fired by Rocket Launcher Troopers making them easier to dodge or can use Force Pull to grab them and hurl them back at enemies or alternatively use Force Push to push them back so the Force is a Jedi's greatest defense against rockets, though using Force Pull to grab them requires proper timing which can be pretty tight and if your not careful Cal will fail leading him to potentially take damage. However my main point is that as far as the canon is concerned, Jedi do have a defense (the Force itself) against certain kinds of explosives such as rockets fired from rocket launchers, though it requires focus and proper timing. However if Cal a former Padawan can pull it off, I'd imagine a well trained Jedi Knight or Jedi Master would be far more adapt at it. Also in Fallen Order Force Pull and Force Push can be used to counter grenades as well though the timing is much easier than with rockets fired from rocket launchers. I just thought I'd point this out as while I agree that explosives are still a good idea, they are better if the Jedi or force user doesn't see them coming as if they do then they might be able to use the Force in some way to counter or defend against it.

@scormern

2 жыл бұрын

By using the force, Starkiller was able to parry multiple rockets simultaneously and send them back to to attacker without having to grab them with force grip and force throw, though he was able to do that as well.

@dimitris2936

Жыл бұрын

The only issue is that games a lot of the time don't match up well with lore, same way if you die in fallen order obviously he's not actually dead in lore.

@jilliebean6312

Жыл бұрын

@@dimitris2936people that try to mix games with actual lore are baffling 😂 like yeah ok lets all just drink health potions and equip weapons in our invisible backpack irl

@garrettlich7140

Жыл бұрын

@@jilliebean6312 that’s not inherently fair as an argument Some of the game abilities seem to be logical when compared to the canon, force based telekinesis can be used to precisely move objects, close the wind pipe, and launch people and objects with great force, it seems plausible that redirecting a missle can be done (albeit it would require great mastery of the force as well as timing) That’s not to say all aspects from the games adhere to the lore logically, in the newest Star Wars game you have to kill opponents to refil ammunition, blasters as per lore can fire 100-1000 of rounds before requiring a reload, meditation is not a save point etc I think the use of games and canon in these kind of arguments/questions is valid so long as we use what is plausible as per the rules of the world

@wingsoffreedom3589

Жыл бұрын

​@@garrettlich7140 I'd go further than that and say the timing thing with rockets are a game mechanic you should logically be able to simply put up a force wall or push that repels rockets in it's area of influence. Which now that I checked you can also do you don't need to grip the rocket with force pull at all just tap push before it hits you and it sends it in the opposite direction.

This one's for you OliveTwist: So I’ve already described my ideal lightsabers multiple times over the last few videos, so I’m going to start thinking of some more unique lightsaber-ish weaponry/equipment utilizing various types of Kyber crystals that I would absolutely love to rock if I existed in the Star Wars universe. These wouldn’t necessarily be my first choice, but in certain situations would still be epic. This video’s idea: All purpose combat blast-rifle. This would be a regular old run of the mill blaster rifle most of the time, but with a magazine for loading slug rounds. Because large caliber slugs are quite difficult to source and very expensive, I would make my rifle able to function just as a normal blaster, but with the option to switch ammunition types when needed. At the end of the rifle, I would secure a discreet shoto saber with a Ghostfire and Stygium crystal in it. This would function as an invisible bayonet in close quarters combat, as well as generally masking my position from sensors and prying eyes. The rifle would have one other extremely helpful feature. When not using slug rounds in the rifle, I would run the stored plasma ammunition around the Ghostfire crystal housing, causing the blaster bolts themselves to become nearly invisible, depending on how long the plasma was in the crystal chamber. This would allow me to “charge” up a blaster bolt, with it becoming more invisible and harder to see the longer it’s charged. For chaotic firefights, I would still be able to rapidly fire the rifle, albeit with the side effect of the bolts being completely visible. Of course I’m not sure if this is how kyber crystals or the force work, but I think everyone can agree I’m making less assumptions than disney does with every new Star Wars show and movie so I’m gonna roll with it.

gotta say I found you jedi killing recommendations to be awesome!

Hey VF2 what's up! Keep up the awesome great content dude here's for the giveaway. My ideal lightsaber would actually be two different parts. First I would have a normal straight handle with a permafrost crystal and an amplifying crystal for more power. The main blade would be just a normal straight blade but there would be two vents in either side of the handle that come out at a 45 degree angle and point away from away from the handle. The vents would probably be around an inch long with the actual blades being around 3 inches long. And they were put on afterwards by me and with scraps so it wasn't expertly done and so they would be kind of like in a weeve pattern that you could see through. The top of the blade would be slanted and have two little cuts in it exactly across from each other. The design of the handle would be round and kind of workshopy because when it was built I had limited parts so it is kind of a little random. After the top the vents would be there about an inch or so down. It would have a switch then instead of a button around the switch is smooth metal. After the switch would be metal ingraved with and grip and pattern made with a blow torch of sorts just small. On the handle there would be 3 wraps of beast hide spaced about an inch away from eachother and would start at the top of the handle. The end would round into a sharp point made out of a small bit of beskar like I said a little random. The metal would be all be somewhat higher quality because my family had a good bit of money however it would all still be the same color only aftermarket and from paint. These blades would be green repersentingredients my connection to the spiritual part of the force. The second part would be a lightsaber gauntlet with two gold/yellow blades on the left and right side. The gauntlet would be very round and smooth with all the components being hidden inside. The gauntlet would cover all of my forearm and slide on and then be strapped on for securness. The straps would be made out of beasthide or other types of leather. The front end would end with a very round curve down and back would just be straight down. The top layer of metal would all just be on peice and would be colored either a weatherd black or dark gray. The top would have a plate of beskar on it so it's able to block other light sabers in a dule. The gauntlet would have no switch or button because I would just use the force to ignite them. The gold/yellow represents the high level of my force connection and the position of my family in the jedi order as we were previously jedi temple guards. So where each blade of the saber is projected is actually a half of a jedi temple guards saber. The two halfs are set in place inside the gauntlet. The saber was damaged in an explosion that happend in my house after a ship hit it. The saber was damaged in the middle and so it was split to two for usage. In the middle of the gauntlet it would also have a built in balster in the middle of the two blades. The blaster would utilize the two crystals of the sabers to amplify the shots. It would use gas cartridges that u insert from the back. The balster would be for tactical and ranged attacks like how Ezrans saber functions.

(For the contest) My ideal lightsaber would be a sith Saber with a smaller handle with unique Zeffo type of designs on it, it would be a bronze color with white around it, the blade color would be red but it would have a short blade on the other side that is orange, (to represent energy and fire(it could also be black, to show darkness, hate, emptiness and aggression)). There would be handle guards around the emitter. The design fits my personality, (not the colors seeing as I'm not a heartless killer) but because it kinda just feels right to me. Almost like a kyber. And mainly because I've had an attraction to the mysteries of energy, and darkness

Man i love your star wars videos so much

what might work to take out a jedi would be a gaderffi but with beskar reinforcements the beskar reinforcement would mean a jedi wouldn't be able to just slice your weapon in two, so you could just hit them with the traang of the gaderffi and the sand bat venom would paralyze them

I think my favorite/ideal Lightsaber concept comes from a practical application of the lava Lightsaber crystal. The Sabre hilt itself would be a downsized great lightsaber hilt around the size of a shorter than average saber staff handle, this not only gives more room for internals and greater leverage like a greatsword but keeps the volatile blade away from the user. Next, ideally, though not required, the blade would actually be a narrower broad emitter blade design; specifically, this cuts down on the amount of "blade" one has to deal with resulting in a lighter blade with more of the energy focused on the edges and tip. Essentially, this weapon is to the great Sabre like a Spadone is to a Great Sword, a bit smaller, but lighter and more agile while being larger than a normal lightsabre or longsword. While capable of being used as either type of weapon. Additionally, a second crystal to amplify the effects of the lava crystal would be amazing if it was a dual-phase design, making the blade even more powerful if needed. It would be a drawback if used all the time however because the density of the blade would become too much Furthermore, how the user wields such a Sabre is just as important as the Sabre itself, the style would be rooted in a combination of forms 4 and 5. An emphasis is placed on the efficiency of strikes and mobility of the blade. their style of Ataru is focused more on the dense blade than the user while utilizing powerful yet efficient (in both energy and movement) form-5-based strikes. What does this give us? A powerful, volatile, dense, yet deceptively agile blade that commands a presence in any battle as it blasts through the defense of its foes while alternating between focused traditional attacks and heavy sweeping strikes. It allows the user to overpower their opponent with both skill and power. I think the lightsaber blade being orangeish purple would fit a Jedi sentinel wielding an oversized lava lamp As for my design preferences. The hilt would have an industrial (by Star Wars standards) design, the Sabre is constantly being upgraded tweaked, and perfected, with the internals ever-changing with better and better parts. Clearly built by hand rather than ritual, I would want my Sabre to be perfect in my hand. What better than this blade to be wielded by a miraluka Jedi knight of all people! More akin to a sentinel, they came across the gem after they and their master discovered it within an old factory that harvested material from a volcanic planetoid. It would concern the order over not only the blade itself, but the whole lightsabre being inefficient in their eyes. A perfect way to push away a perfectly good Jedi and forever lose a rare and powerful crystal! Moreover, assuming it was built by hand by a Miraluka they wouldn't really care about physical appearance, instead, they care about how it feels in the force. Through the force, this lovingly hand-crafted blade feels truly beautiful. Sadly, as with all things Jedi, it was probably lost or destroyed in order 66 regardless of it'd wielder's survival TL;DR -shorter than average single-bladed saber staff like hilt (downsized great Sabre) -hand-built, practical, industrial style hilt with a beautiful force presence. -pseudo-Dual-Phase Lava crystal + Amplifier crystal design -narrow broad saber blade emitter -purple in coloration -utilized in a form 4/5 style valuing efficiency in both energy use and movement while using the force to augment blade speed. Confused the shit out of the Jedi order because they were either concerned about the crystals and construction or bewildered by the seemingly inefficient choices of the blade's design. In reality, the blade was more than the sum of its parts. Many didn't realize that until after it was lost in order 66

For the Blade, mine would be a dark grey with silver wisps coming off of it. The blade would be very thin and would be semi-transparent and hollow. At the very bottom of the energy blade part, it would have a triangular base like that of the energy sword in Halo, but it would be much smaller it would end in a double point where the blade would turn a deep black and no longer transparent and hollow. Its power would be that it would be almost sentient, directing its user through the force toward the blade of its enemy to assist in blocking it. However, the blade would also be a pacifist. Never allowing its user to strike down on their opponent unless their was no other option, it would simply wear the user out, slowly absorbing their energy until they no longer had the strength to fight. If they still did not come to their senses, the blade would then allow the user to finish off the assailant. You could fight off many enemies at once, slowly gaining more powerful whilst your enemies attacking you would slowly crumble to the ground. If a lightsaber gets caught in the prongs at the tip, it would immediately short out. Whilst fighting another lightsaber, whenever the swords hit eachother, the blade would fill in slightly with the color of the enemies lightsaber. Meaning that if you were fighting multiple jedi/sith with different color lightsabers, you could get a rainbow colored lightsaber, although the default features would still be visible. Once the blade is completely filled in, the user can activate an ability that would cause the weapons of all enemies round you to fly out of your enemies hands and make them lose a massive amount of energy, typically making them unable to fight for a long time. Again, the blade/user gives them one chance to turn away from their side (they will turn to the dark side if the wielder is of the dark side, or turn away from the darkside if the user is a jedi.) before they get killed. If the wielder is neutral, then instead the blade would just tell them to stop whatever their plans are. The answer must be sincere or the blade will take it as if they decided to die. For the hilt, the bottom would have three curved prongs on the edges that point toward the center equidistant from each other. The handle would be made of beskar, although the power of the blade causes the beskar to turn a very dark grey when active. It would have a crossguard that would extend just as far as the triangle part explained above, with spiky ends. The hilt would be very slightly curved outward, allowing more control and swifter swings.

Thanks for this video, my man.

I’m going to quickly describe my light saber here not to bother you! My ideal lightsaber is a mostly straight hilt except for the bottom side which is a curved vented point, it would have a small hook on 2 sides of the emitter, and gold secondary colors, the crystal would be a krait (or however it’s spelled) dragon pearl, it would emit an odd yellow and would have a greenish aura, I would have a second shoto saber using a purified kyber crystal, with a gold hilt, the two sabers would connect similar to cal kestis’s connectable and disconnectable sabers

Since we’re all giving our ideal lightsaber design, here’s mine: Twin lightsabers each attached to a prosthetic device on each hand (I don’t have fingers, so that’s how I would wield them in battle). Each blade would be the same size, roughly 2.5 feet long and be a pure white, signifying a strong connection to the Living Force. The hilts would mostly be a titanium grey with blue and gold highlights.

@logandyck5356

2 жыл бұрын

It’s to enter a giveaway

My ideal lightsaber is kind of like two curved lightsabers (like dookus lightsaber) but they are put togheter. The color would be a cyan and lime striped pattern on one side and purple and yellow on the other side. I would also love if you could pull them apart and use them separately. The handle would be gold colored with small silver stripes. It would have buttons to turn on and off but it would be cool if you held the lightsaber and pulled it up fast it would turn on. The sound could be nice if you had more of a vaporizing sound than the normal and the turn on sound was the normal lightsaber turn on sound but with a more exploding effect. I would also like to have a holster for each one of them when you have them separate. Thank you for giving gifts and may god bless you! 🙏

I would dual wield. First, an ordinary blade made of song steel with a solari-kyber fused with a piece of the sunriders destiny crystal so that i have a wide blade suited to form three (my preferred form) that only I can use and cannot be destroyed by lightsabers. My second blade would be light dagger, also made out of song steel, with a ghostfire crystal Paired with a concentration crystal to improve my use of my ordinary blade and assist my use of form three. This would also give me an almost invisible secondary blade that would would be near impossible to parry

My ideal lightsaber is a bit shorter in the hilt than a lightsaber pike. He had 2 lears of beskar at the side of the hilt and 3 at the bottom so it can be more balanced. The sides were painted black and red. The blade was short and it was a bit curve. The color was red-orange and the lightsaber's name was flame. To activate the saber you need to use the force that was the only way to ignite the saber. It was really hard to learn to use it but tough to defend against. The blade was reacting as the user if the user gets mad the lightsaber becomes unstable. The lightsaber was very uniquе. The crystal was my idea and I even created his own character he's name was X and he was a Jedi-type warrior. He tried to use the force ability he read in the archives that luke and the sith used to create lightsaber crystal but he get unstable and the lightsaber crystal didn't come and X thought he didn't make it right. later he saw something weird and he get there and he find his lightsaber crystal but later he realize that as long he is in battle he get more and more powerful but when he stop fighting his powers come to normal but was very weak in water(crystal). That was my lightsaber good luck all :)

My ideal lightsaber would have either a detachable double-bladed hilt, or a detachable, double-bladed pike, made out of either Beskar or Cortosis. As for hunting Jedis, Cortosis everything. Cortosis armor (or Beskar armor), cortosis bullets, cortosis swords, aswell as an IG unit, and a jedi hating lizard.

My Ideal Lightsabers, are for duel wielding, main saber in my right hand, shoto saber in my left. They would be straight hilts, how a simple saber would look, main saber about 10 - 11 inches in length and an identical shoto saber about 2 inches shorter. Both sabers coated in brushed gold from head to toe. The body would have thin vertical indented lines along it for comfortable grip, spinning and flourishes. There would be 4 thick black lines around the emitter with a column of horizontal windows in each line and a matching pommel with a milled grip detail. The windows would stand out the most when the sabers ignite a blue blade and would especially be an elegant contrast to the gold of the saber and be a nod to my college colors. The primary blade length of my main saber would be 36 inches, while the shoto’s primary length would be 26, I say “primary” because both sabers would secretly have the dual-phase function, allowing the blade’s length to be adjusted between 20 - 37 inches during combat, completely throwing off an opponent if constantly switching sabers between hands. The name of these Sabers is ‘Exodus’ & ‘Exodus’ Shoto, Exodus meaning a mass departure/retreat of people, so in this case, when you see me, it is time for your whole crew to leave. My second constructed lightsaber would be a coming-of-age saber, one where I am no longer a young, prideful apprentice but a humble, newly found Knight understanding of the Force and on the verge of mastery. The straight hilt would be about 12 - 13 inches in length, slightly longer than my first main saber. Designed around a profile shape, with body features lathed and milled details with an indexing ring making gripping the saber effortless. Featuring an angled emitter with horizontal oval windows on the flat sides of the saber, mirroring the details all down the saber's body, switch, and pommel section. It will not be entirely gold this time, but a balance of brushed gold and black (Story wise: having used parts of my damaged shoto saber). The flat sides are black, the rest of the saber is gold. The Krystal used for this saber would be a Danderi Crystal, where the blade color that would change based on the wielder’s connection to the Force, and In my case, I actually see myself with a silver/white blade, it would in fact contrast well with the black windows of the emitter, making the light from the saber especially pop at night. Another ability as learned from the video is that the Danderi Crystal is also being able to recycle the energy from a battle and recharge the user’s energy to stay alert and keen to the Force. And because of that, I would name this Saber ‘Rebirth’ for the essential replenish of energy the Krystal gives when ignited and the silver blade representing true balance of the force, allowing one to rise above most who only see conflict. This saber will not have a shoto, but instead will be utilized alongside my ‘Exodus’ saber for dual wielding, due to losing my Exodus Shoto in battle, (story wise). My new ‘Rebirth’ Saber will go in my right hand, while my original ‘Exodus’ Saber will go in my left hand.

Great vid

My ideal lightsaber would be if possible, a cracked black kyber crystal with powers similar to the darksaber in feeding off the user. It would have crossgaurds, a curved hilt similar to Dooku's made of pure beskar. It would also have an option to quickly switch the kyber exhaust vents to the bottom to allow a light dagger esque use. If possible the ability to connect it to an identical one like Asajj Ventress would be incredible allowing for as one sith may put it "UNLIMITED POWER"

Describing my ideal lightsaber: • Wield: Jar'Kai. I would love to dual wield lightsabers like Ashoka, Ventress, Starkiller, Maul and Revan (in a vision) did. • Hilt: The base of the hilt would be made out of the alloy of beskar and steel to make it shiny. The beskar would help to make it light but extremely strong at the same, even though the mandalorian Armorer would send me to Mandalore to get clean of my sins for using beskar to make a weapon. Anyways, the hilt would contain some black details to contrast the shininess of the base, after it's an elegant weapon for a more civilized age. The bottom would be curved downwards a little bit like it's on with the Defender hilt from the Jedi Knight: Jedi Academy game. • Crystal: - Color: My favourite lightsaber colors are red and yellow. My affiliation of the force would be on the middle but a little bit closer to the dark side. I always liked the sith better. But I would also use the force to help my loved ones by imposing my own will and desires on the force. Why not purpe you may ask? Because, for me using a red and a yellow lightsaber would be the mocking for both the jedi and sith too. - Type: I would use 2 in each to alter the length of the sabers. Dantari and Qixoni crystals in the red one. Meditation and Mantle of the Force crystals in the yellow one. Dantari to recycle the fury of the battle and also regain used force energies faster. Qixoni to increase the heat of the blade and enhance my force potential. Meditation crystal to have a better connection to the force and to regain spent force energies while in combat and the Mantle of the Force would help me to increase my force powers. The quiet similar but unique in a way. But I think I would be just as happy with The Revanchist as with my dream lightsaber if I fortunately won the giveaway.

My ideal lightsaber is a Praetor type hilt. I would use strength along with my connection with the force in battles by using a cryte dragon pearl. This crystal would not be for the power the crystal holds, but as more of a trophy because I would get the pearl myself to make my blade.. My bade would either purple or white because I would use dark and light, but I would not be a part a jedi or sith. With this being said, I would be more like a grey jedi than anything else. I am the keeper of the flame Soldier of balance Guardian of balance I am a grey Jedi... Even if I don't get picked for the giveaway I just want to say I really enjoy your content and you explaining every aspect of Star Wars. May the force be with you.

You should make a video covering all the saber forms :D

My ideal saber would have a gray hilt with a slight curve with red cracks running through it from previous damage. It would have a blade type similar to a dual phase saber with one blade being green and one being a deep red. The color of the blade would have the ability to be changed depending on the context of my surroundings or mission.

My ideal lightsaber would be silver colored like the cyber, with ghost fire crystals, I uses these rare crystals in my saber because they are near invisible and silent making it hard for my enemies to discern wether or not I’ve tricked them mid fight by turning off my saber and turning it back on, and for surprise attacks

My ideal light saber would be based off the dark saber modified to have two crystals the main one being a ghost fire, and the secondary crystal would be the stygium

This is getting generation tech style, i like it

Ideal lightsaber would for a duel be a cross guard saber due to it giving a greater defense , and being able to utilize it to parry your opponent and in a scenario where you are locked with your opponent you can use it to wring the saber out of their hand, about standard size hilt or having it more like a bastard sword being able to wield it with either one or two hands for a greater options in combat, being able to use both strength and agility and gaining the ability to use mulitple forms, making it out of beskar would make the lightsaber a bit more resistant to other saber attacks, ensuring not loosing one of the guards from getting cut off, in terms of blade color purple blade for the win.

My ideal light sabor is a double bladed staff sabor. Black leather wrapped with fangs from beasts hanging off like a tasle. The metal is a worn black or gunmetal with two exposed crystal chamber. The switches have a etched hash pattern for a bit of a grip or texture and the emmitter has something similair to the claws on starkillers sith assassin lightsabor but since its a double blade its on both sides. The crystals are vextal crystals with katar crystal so my blades would use the force drain slowly weakening my enemies and making me stronger while also using force plague clouding their mind and also slowly killing them when struck The blade would be in syraight legends and have both sides color being black like the black sabor color in force unleashed but the blade would also have a unstable effect like kylo rens

Special made magna guard made of beskar, a slug thrower (I believe explosive bring too much risk to the table) beskar armor a flame thrower, one of the lizards, a slug thrower and maybe one of the light saber whips or slaver whips because they have shown to work against Jedi, otherwise it shouldn't be hard at all, close range combat you can short his weapons and force him to either retreat or fight with no powers or lightsaber. For added protection you could get your organs changed out for robotics ones incase of a sith user trying to crush or destroy your lungs or internal organs. This would probably be the cheapest yet most successful battle strategy as you wouldn't have to restock on ammo or food for pets much and would render a force user almost useless.

Dude this video could have been a single word answer Ingenuity

My ideal "lightsaber" is actually a lightsaber pike with a light blaster pistol integrated at the tip for surprise attacks and medium ranged fighting capabilities. The hilt design would be aesthetically simple but made of expensive materials such as Black Phrik and Chromium embellishment. I'm going to take inspiration from dark side warrior Warb Null in Legends and have the last section of my staff be a back up lightsaber. I'm not one to take caution lightly. Not all enemies will stay at a moderate distance for my pike to be most effective. My weapon is very disadvantageous if an opponent or enemies are located in cluttered or tight spaces like offices and hallways. I've said all of this and didn't even describe the crystal/blade color and its properties. I'd have 3 crystals in my pike's longer crystal chamber: -1st is a haunted White Sapphire gemstone - 2nd is a Damind focusing crystal for a wider and longer blade - 3rd is a Rubat focusing crystal to define the blade's shape and sharpness. These crystals in concert would give me a defined "phantom white" blade/spearhead that incessantly whispers while active and groans/shouts when making contact with an object. For some lore aspect to this strange weapon, it exists to inspire fear and repentance in the presence of the mysterious and powerful leader of a dark side cult called "The Apostles of Onrai." The leader is a young Sephi man, who's clothing and personal objects predate modern Republic designs and fabrication by 10,000+ years. Hope this wasn't too much detail.

My ideal lightsaber would be gold and white in color, with a polished and shiny look similar to the design of emperor Palpatine's lightsaber with 2 sides of the handle being engraved with silver patterns almost as if it were a small , circular maze. With the center of the maze having an engraved symbol in the shape of the kyber crystal of which i have chosen to be the Lorridian gemstone and the Hurrikaine crystal combined. This is to maximize my defense as the Jedi are not really meant to be warriors, more like peacekeepers if you will, while still having the option to resort to violence if absolutely necessary. The additional sharp reflexes will help with breaking the enemies defense and maintaining a good defense, and the ability to predict their movements helps to find an easy opening in their defense/offense. The handle would also have a sort ring around both ends of it to prevent it from falling out of my hand. It will be double bladed, with both blades being purple because I imagine using both the light and the dark while still knowing which path to never stray from. It may be a double bladed lightsaber but I really only using one blade. in one moment i could be using Form III: Soresu , and the next the other blade ignites, quickly changing to Jar'Kai. And there you have it! My ideal lightsaber design. It's a bit simplistic because I was a bit too lazy to go into exact detail, and might have gotten some stuff mixed up as I'm quite tired at the time of me making of this lightsaber design.

My ideal lightsaber would be a double bladed one that didn't have to many knobs or buttons so it would be easy to swing and could also break apart and allow me to weild it like Ahsoka does. The color would be be a flame blade or unstable royal blue. I would use a Danderi Krystal because I think that it would be OP to recycle your force energy and while your opponent can't use the force, you can. If not that Krystal, than the Katak Krystal, because it would be OP to train your opponents abilities and then from there you can use the force and they can't.

I believe a Kohlen energy shield would be an effective shield

Cad Bane had so much plot armor. Him being able to have even a short lightsaber battle with Kenobi was laughable.

I feel prepared enough with my first choice from the pool - explosive ammunition guns. However it's nice to know that specie of lizzard and consider buying a new pet. Anyway I guess in star wars universe I would be Jedi padawan, eventually knight, probably not master but I'm ok with that. I would be just an average Jedi, that's still good enough

My perfect lightsaber would be shaped like palpatine’s. It would have a cut out window to show the Hurrikane Crystal (like Starkillers), and the Emitter would be like Darth Tyranus’, with a sharp black blade on the end to sometimes k!ll my enemies quietly. And the entirety of the hilt would be made of beskar to prevent any damage or destruction (like what happened to Ezra’s). For the switches, the blade length and power adjuster would be gold and the activation lever black. The purple crystal (Hurrikane Crystal) signifying that I have a deep knowledge of the Dark side, as well as the light. Thanks and hopefully you got to read mine.

My lightsaber would have a cracked rainbow gem giving it a unstable cyan blade. The hilt would be have the curved approach made of Mustafarian copper with a smooth wood from the Brylark tree inlaid into it. The vent for the crystal coming out the back creating another small blade.

My ideal lightsaber would have a black hilt and white blade, it would have a split guard similar to Cal Kestis’ and Ahsoka Tano’s. It would also have an exposed kyber crystal, and the bottom would be shaped like Darth Vaders head.

I would recommend putting a Kyber Crystal and light sabre function in your arm gauntlet and use it sort of like a knife and use it to combat light sabres if you’re skilled enough, or go full assassin‘s creed mode and stab them in the back lol

One of the easiest ways for clone troopers to kill Jedis is just circling around them and using rapid fire as done in the Bad Batch to kill the Jedis in order 66. It's not the best if not already kind of in form but it's something. Have a nice day :)

"Truely wonderful mind of a child is, heh heh..."

My ideal lightsaber would be a War Dragon Rider lightsaber with a Firkraan crystal alongside an Etaan crystal. My lightaber blade would be bright orange with a deep crimson outline to show my compassionate nature while also conveying my willingness to do whatever it takes to protect those I love. While this lightsaber wouldn't improve my force abilities in any way it would give me a major advantage in battle. Every attack dealt or received by my lightsaber would cause the opponent's weapon to fly backwards while also dealing out an electric shock.

Ideal saber: damascus steel, specifically gold and zink colouring dimascus paired with copper and steel, they have the wrong properties to combine so this is impossible but this is sifi, my idea is to make zink and gold Damascus and coper and iron dimascus turn them into bars and then make dimascus out of those already dimascus bars making a double pattern, then going past that onto the desing i would like a indented microhip like pattern on the hilt, a 4 prong sticking out like the feet of a AT-AT walker (forgot the name sorry if its misspelled) on the back of the handle, the tip i think thin and a desing indent to make it so the blade is in a + shape no reason its purely cosmetic and for notariety because getting stabbed would leave that shape, and the handle will be conductive because i would pair it with force lightning to make lightning shoot out of the blade and handle making it so its more deadly and harder to fight it will also deal extra shock damage, the last part of the handle is the buttons. buttons 2 to turn on and one to turn off. I like japan and katanas so the on will be on the back of the handle so i can have it and sort of draw it like a katana, also good for fast draw attacks, button will be same colour so it blends. Then the off button will just be normal just so its not too dangorus too myself and its easier, the secondary on button will be beside the off button making it so i can turn on and off my lightsaber to go through a block, its a 1 handed hilt but can be used 2 handed and made light so its good for fast attacks, to hold it i will have a sheath made to hold it on my waist so i can quick draw as a counter or battle starter, counter cause if i get some distance i can get into a ready stance and put ot away to draw and attack faster than my opponent, and battle starter for the same reason. The blade will be yellow cause yellow signifies a change of identity and i would like to grow up as a jedi then switch to a un named bounty hunter or rouge so i can use force lightning without restrictions using it as my supporting attack and using my unique blade to gain notiriety and make a name for myself, i forget all the forms for lightsabers but i know one is super agile and i would use that one risky but high on attack, and i would channel lightning through the blade to make it spark Edit:i added stuff in the reply section for the utility and i added grip cause i focused so much on design. Ok thank you

@wynterlalonde4258

2 жыл бұрын

That is longer than i thought!

@wynterlalonde4258

2 жыл бұрын

Now looking at others i see i did average and i should have put more detaile mainly in the blade and history as well and functionality but i beleive it represents me very well and my main playstyle in most games is support and this will aid me in doing that using force lighting to stun and my blades unique shape to add an challenge for my enemy as they wont be used to it then considering im a rouge i can say im using my force lightning to support my blade, and just slap a nezuko or anime stiker on there and boom its perfect for me, also forgot the grip but a pretruding grip 5 circles going arround and that should work. Luxen Cristal, just watched the lightsaber video and that the one that works best, if it can still be yellow ill take it but otherwise ill go with default, getting further into the video i see libite cristals probably spelled wrong but the thin blade would be easier to sape than a normal one so if i can in woudl try to bind both together if i cant ill take the first one.

My ideal light Saber would have a 9 inch hilt of a black chrome color, a crossgard that resembles an old knights sword, the blade would be white and in shape of the dark saber, and the style that would be used with light Saber would be a custom form that is a combination of tangsodo style sword fighting and old knight style fighting.

I would consider fighting within line of sight of a force user a last resort. A moment of concentration might be enough for them to get flinging, play trash compactor, or just shoot you. On the non-melee small/medium arms scale, my approaches would be the following: 1) Explosive AoE weapons that don't involve a single (especially rockets and grenades) or a few projectiles are the way to go. Landmines already mentioned, all sorts of IEDs with proximity fuses. 2) As Master HK suggests, gasses that don't depend on inhalation. Poisons and corrosives that are contact based, and while you're at it mix in explosive vapors for an explosive finale. Would have been a quick end to Episode 1. 3) When you know they're coming - hostages. You might have a person they want, or they might come looking for you in your ex hideout and find a prisoner. Either way, one sitting in a cell and unaware the wall panels conceal several pounds of explosives. 4) At worst, directed AoE weapons like sonic guns, poisoned flechette and various shotgun buckshot, flamers, stokhli sticks, rifles set to stun. My ideal saber is a 1.5 hand saber with a golden dual phase blade, in a sleek body style like that of the temple guard (less..cooling fins? and thin neck parts) in black and gold trim.

The Simplist solution is to use a Chiss Maser. While a Maser can still be deflected by a lightsaber, it's strike carries a significant amount of kinetic energy, which would probably knock any lightsaber out of the users hand, surprising the user and leaving them vulnerable.

Grievous taking notes

My ideal lightsaber would be: A dual phase split saber, allowing me to confuse my opponent with the ability to change the length of my blades as well as switching between a single saber, dual sabers and a saberstaff when in combat. The saber hilts themselves would be made of beskar and look similar to Arcann's lightsaber from Swtor but mainly black with dark grey accents. The emitter crystals would be shards of a large Krayt dragon pearl. Due to this the blades are much more powerful than an ordinary lightsaber but unstable in a similar way to Kylo Ren's lightsaber. The colour of the blades themselves would be white with a black core like the darksaber.

My ideal lightsaber would be a sliver and black handle with rubber or other rubber like substances to increase my grip on the blade when parrying and striking opponents. The base of the blade would be a durable metal with a layering of electrum plated metal (from fallen order). I would have a harpoon shaped emitter so that it can cover my hands and cut opponents with the sharp metal, I would also have a switch instead of a button. I would use a dual crystal lightsaber, one side with a quicksony kyber Krystal to increase the power of the force i weild and if I need to cut through substances, it is a heated blade and will cut through almost anything. On the other side, I would use a katak kyber crystal, allowing me to drain the life of my opponents while striking them with a heated blade. The katak and quicksony combine would assist in using the force on enemies and the quicksony would likely improve the power of the vitality drain as it is increasing the power of my force energy, meaning my opponents would likely be staggered by the drain giving me a chance to attack. For a color of the blade I would go for yellow because then I dont associate myself with either sides of the force but can still use them both. If I were to chose a lightsaber from your store, I would chose the aurora and for the color black and gold stripes. I like the aurora because of the curved grip and sharp emitter. Its color scheme is also really cool

See, you forgot the most powerful thing that can counter a force wielder in battle: Plot Armor. It requires no extra weight to the individual, and it ensures you'll survive every encounter. All you have to do is be the main character

Well I'm glad I came across this giveaway because I've had a lot of thought on my dream lightsaber and I'm gonna use every excuse to talk about it. Design: So my ideal lightsaber would be a double ended lightsaber with the same proportions on Maul's blade. The idea is it's functional as a sword staff when just one end is turned on and then obviously as a double ended, although I'd make some changes. First of all the saber will separate into two BUT not in the middle of it making two equally sized lightsabers, but instead about 2/3s of the way down the handle producing one saber with a longer handle and one with a shorter handle. The longer saber of the two would be best utilised in fights where power and leverage is desired while the shorter one would be useful for tactical reasons, very close/confined quarters combat and for quick attacks and movements (and also stealth of you could call a lightsaber stealthy). And then of course having the option of two sabers means you can attack and defend at the same time. The hilt of the blade would be coated in Cortosis, the conductive properties of which would cause lightsabers to temporarily short out upon contact. Baiting an opponent into hitting the larger handle part of the staff/weapon would effectively disarm them creating an opening and for a window of time, I could guarantee the upper hand. Crystals: The lager half of the saber would use Dantari Crystals as they allow the user a better focus on recovering spent Force energies, occasionally recycling the fierce, wild energy of combat to the wielder to fuel their Force power. The smaller half of the saber would use Hurrikaine Crystals as when used in lightsabers, they created blades that were very good at penetrating defenses as they better ones reactions and reflexes. Colour: You may have already guessed from my choice of crystal but the blades will both be purple mirroring my connection to both sides of the force, because it looks very pretty, and purple is my colour. The hilt will be jet black with some subtle red detailing along the body in some places in a circuit like design. Thanks for listening to my Ted Talk 😂

I would recommend being experienced in teris-cassi I think that’s how you spell it which is a martial art made to fight Jedi

I recommend a lightsaber hidden in Yoda’s cane for defending himself during exile in Dagobah

This was very helpful I've killed so many jedi after watching this!

My Ideal lightsaber is a red bladed lightsaber because I think that the sith are correct in their ways, as Qotsisajak says, "Peace is a lie. There is only Passion. Through Passion, I gain Strength. Through Strength, I gain Power. Through Power, I gain Victory. Through Victory my chains are Broken. The Force shall free me.” I would like my lightsaber to have a curved and double sided hilt similar to Asajj Ventress’s lightsaber but with a gungan/under water feel to it. The gungans are probably my favorite sentient Star Wars species. It’s really a shame that not many are force sensitive. One side of the lightsaber would be powered by a dual phase ligninor crystal and the other would use the bifurcating cyclical-ignition pulse technique powered by two ultima pearls because in my Star Wars universe I am a gungan named Koff Zipps. Born 42BBY, I was sent away to Mon Cala as a child during the battle of Naboo because the council was worried about my force sensitivity being found out and exploited. I was eventually found hired and trained by the empire and became one of the most well known assassins of the rebellion era after killing 7 Jedi during Order 66. My lightsaber was given to me in 23BBY by the grand inquisitor and I used it for mostly underwater targets until I amounted enough credits for my ligninor crystal and started to bring in the big money. I died at the hands of Luke Skywalker in 12ABY in attempt of his assassination.

Best way to kill jedi? Hire General Grevious from The 2003 Clone Wars cartoon. "I will grant you a warrior's death...prepare!"

My ideal lightsaber would be a double bladed lightsaber with Cal Kestis’ emitter but with Luke Skywalker’s body of the lightsaber with a purple blade. The colours of the lightsaber body would be bronze with white details and the emitter would be gold.

y ideal lightsaber is a double bladed light saber much like Darth Mauls. My saber would have a bright orange crystal representing both the color of the college I’m going to (Oklahoma State University) while also representing the balance of the light and dark side of the force much like my own personality. Being caring and kind but also so compassionate for the ones I love that I would do anything. My hilts color would be obsidian not letting any light out to make the blade pop, but would also have marble white accents to show that very balance. My double bladed saber would also be able detach where I could dual wield my lightsabers. On the bottom of my hilt in white which only shows while detached would be a family brand R3 representing our last names. My lightsaber/s having multiple variations allows me to use multiple forms of lightsaber combat including Jar’Kai, Form 6 - Niman, and Form 7 - Vaapad

my ideal lightsaber would be a double-sided split saber much like cal kestis’ hilt but with a more sleek model. The crystal would be cyan and would be unstable (cracked).

magnetic boots and something similar to cad banes breathing apparatus to prevent force choke

I would use two small cortosis fighting sticks with electro shock ends, a ship (preferably a droid ship) full with ysamalari flying a few 100 meters above the fight, and beskar armor. Beskar armor is cheaper then costosis armor, and fighting sticks, or blades, overdrawn with a bit pure cortosis could shut down the Light saber, and the ysalamari in the air could stop the jedi from using the force. What do you think, did i miss something?

My ideal lightsaber would be double bladed with a copper body with an emmiter with 4 of dooku's blade guard with a purified kyber crystal for the white colour

I would use ancient sith beasts like the terentatek, but the best weapon is information you ain’t gonna use a blaster against a soresu user or a sword against a makashi master

If you accept ideas for videos you could make one on the lightsaber combat forms or if you want to make the work load lighter and likely make more money you could make it into a series talking about each forms rules, pros and cons, and uses and weaknesses.

4:46 *cries in jedi outcast*

Me rolling around with cortosis armor and a ysalamir on my back

My Ideal Lightsaber is exactly like yours

Ideal Lightsaber My ideal lightsaber would be a curved hilt with a cutlass hand guard on the front of the hilt made entirely of phrik. The color of the hilt would be a light purple, (in memory of my unborn children) a blue blade, (the color of my wife’s eyes), and with a white handle. The kyber crystal’s I would use is a Pontite Crystal and a Ankarres Crystal. The Pontite is known for its calming powers and its subzero burning touch from the blade itself. As described in Star Wars lore, the Pontite crystal was also known to hold the power of turning dark side users back to the light and calming them of their negative emotions. The ankarres crystal is well known for its healing abilities to others and to its wielder , so having a combination of both in my eyes is a very powerful lightsaber for a Jedi. For the blade I would have a dual phase blade in order to hold both crystals and for fighting purposes. As an avid fencer and champion of my club, having the ability of changing my blade length is not only effective but also efficient. Plus having a hand guard is a definite bonus.

@joshuajackson4161

2 жыл бұрын

That's very deep

@GalavantGaming

2 жыл бұрын

@@joshuajackson4161 thank you👍

A comprehensive guide

My ideal lightsaber would be: Darth Vader hilt, doubled blade, red and green + inquisitor ring

I would recommend a Besskar spear like in mandlorian

Honestly the fire method is just plot contrivance. A jedi that can block non solids like water can block fire the amount of force from a flame thrower is less than that of a water hose. Heck we saw grogu do it. Also jetpacks realistically should be a bad idea any competent jedi would crush the fuel source or move the thrusters nozzles around to send a jetpacker flying into a wall or the ground. Like how in fallen order the inquisitor moved the steering wheel to send the mantis flying in circles. Almost all methods to kill jedi stem from jedi incompetantly failing to employ telekinesis is practical ways.

@wingsoffreedom3589

Жыл бұрын

Even most arm rockets fly with less force than a slug thrower that jedi casually deflect with telekinesis doing so to a small rocket should be child's play.

As a welder/fabricator I have some issues with the armor segment of this video. You didn’t ever reference the weight or versatility of purposes/properties of the metals listed for potential lightsaber resistant armor.

You forgot pure beskar weapons like the spear in Mandalorian. Even tho they are not approved by Mandalorians they are still fully usable.

"its actually pretty easy" seconds later: "let's assume we have infinite money"

You should do a video on sith alchemy

@jaydenmale9645

2 жыл бұрын

Good idea, I aggree

I wonder why the Rebels never tried any of this on Vader? Specifically using cortosis bullets. (Maybe they didn’t have enough money to do a lot of it though…)

There was also an amulet that kept force sensitive from even sensing u

my ideal lightsaber would be a katana like hilt and guard with a blue blade and blade adjuster

Get yourself a pet terentatek or 2, as long as you don't need the Force user's body back

I think the best is easily the simple flame thrower, it's kinda unpredictable and unblockable via lightsaber.

@xxLaylahxx

2 жыл бұрын

but they could use the force like Grogu did.

@thewhitemexican588

2 жыл бұрын

@@xxLaylahxx pretty difficult tho

I would use a shoto saber with a ghostfire crystal, color would be yellow.

My ideal lightsaber would be mace windu’s lightsaber. I feel like as one of the few main black characters in stars it always gave me someone I could see myself in when I was younger look up to. he is portrayed as powerful, intelligent and has a dark side that that he controls with discipline. #giveaway #myfirstsaber #macewindu

Can probably use these against sith too

With my very poor hearing, I would get a lightsaber that would emit a frequency that would make a jedi fall to their knees

My ideal lightsaber is a green blade with a cracked crystal from battle to get the cracked effect the hilt would have a small vibroblade inside should the blade ever fail the hilt would be a combination of obi-wans Luke’s second saber and anakins the emitter would obi-wans the middle grip would be Luke’s and the bottom grip would be anakins it’s simple and I like it

Imagine a human/Ysalamiri hybrid. :P

1. Death Star boom boom the planet they're on.

Knowing the Jedi, I think it's not an easy task. If a Jedi Knight or even a Master had been trained properly during the training period, he would know what could harm him and would be skilled enough to survive many dangers, unless he is a Padawan. Many would say that killing a Jedi or a Sith only takes a lot of numbers, but so far we have seen Force-sensitive users who manage, despite being in the numerical minority, to survive successfully. How: -Darth Vader who manages to beat entire rebel armies with little difficulty - Luke Skywalker who (as seen in The Mandalorian) destroys the Imperial droids as if they were toys -Darth Maul destroying hundreds and thousands of droids with his lightsaber training and Force abilities - And also former Jedi Anakin Skywalker, who with his Force Retribution ability manages to destroy unimaginable tons of droids As you have read, a Force user does not have to worry about numbers as long as he is powerful enough to deal with them. And one last thing, if the Jedi at the time of the Republic would have discovered Order 66, events would have turned out differently, as they did not expect their clones to shoot them and were therefore caught off guard. I said it all, I hope I have been of help.

My ideal lightsaber would be a thin white katana with je’daii markings making up the blade’s hamon (markings across the blade). It would also contain multiple crystals, as to change from a katana to a 3 stringed whip. The hilt would be light, tactical looking, and easy to handle, being a gold color and having small markings along the hilt. Other crystals give the blade flexibility, making it easier to slice through giant opponents and tough meat. The hilt would also be flat, like a katana’s hilt.

@jesussalomon3598

2 жыл бұрын

Is it puedo le for an energy blade to have markings? I don’t think I’ve ever heard of it.

@greece_rome

2 жыл бұрын

@@jesussalomon3598 the darksaber had details. These details are made into letters and from that, words.

@jesussalomon3598

2 жыл бұрын

@@greece_rome I would argue the dark saber had fizzles of white energy on the black blade. But in any a case, an energy blade with markings would be pretty cool thing to own.

@greece_rome

2 жыл бұрын

@@jesussalomon3598 actually if the ancient je’daii had a written language, that is. I can’t say that it would actually be made of letters 😅

A gun wouldn't melt, it would be simply turn into extremely hot gas from the heat of the lightsaber

My ideal lightsaber is a traditional Sith style hilt lightsaber using a dual phase blade. I would pick a Ghostfire crystal so I can take my enemies down stealthily and confuse them in a duel with my almost translucent blade. I would add a ninja katana style into the mix to my sith styled hilt because it would look good with the ninja/samurai theme I have in mind.

Soo... Technically a claymore mine (assuming that the force user doesn't detect it) is pretty good mine to kill force user right ?

I think a wokkie crossbow would work cause it is a explosion to it and it isn't that heavy

Obviously use the clones 🌚