It's the same procedure for the Radiomaster Boxxer too. Thanks, this was quite informative and very helpful.

Excellent video. I'm an FPV newbie and I just received a new 4 in1 Zorro with an external ELRS 2.4GH module. Currently jumping into FPV world and building my first FPV drone from scratch. Was into helis before and now I fly a DJI Mavis Pro Platinum. Bought the radio first to put some hours in on the simulator. I was a little confused about accessing the rear module and setups but thanks to you I think I'll be good to go.

@HalfChrome

Жыл бұрын

Great. Good luck

Hey thanks Half Chrome, I really found your throttle cut way really awesome, I never knew it was that easy to adjust, I’m going to setup all my radio’s like you suggested.

@HalfChrome

Жыл бұрын

Glad to help

Hello Half Chrome! Thank you for showing me a nice video! I really enjoyed it! Thank you for sharing! Have a nice weekend!

@HalfChrome

2 жыл бұрын

You too!👍

Nice Jack . Very helpful buddy. Thanks. You explained it perfectly

@HalfChrome

2 жыл бұрын

Thanks

Excellent video! Helped me get my talking switches set up and Throttle cut. Throttle Cut was not working right and I figured out the second Insert needs to have the same switch added, which you skipped over in the video. Without adding it, a portion of the throttle cut is always enabled.

@thefilmjerk901

2 жыл бұрын

Bro- could you elaborate for a dummy like me ? Trying to get this working

@ethancaswell7070

2 жыл бұрын

@@thefilmjerk901 at 12:14 do what he does at 11:24 (add the same Switch)

@thefilmjerk901

2 жыл бұрын

@@ethancaswell7070 ah thank you

@thefilmjerk901

2 жыл бұрын

@@ethancaswell7070 one more: what if I don’t want it to go to zero? I know I don’t want throttle less than like 40%, ever, how would I change the parameters to just be 40-100?

@ethancaswell7070

2 жыл бұрын

@@thefilmjerk901 so I used the same parameters as him and it only ever cuts mine as low as 50%. Wish I knew which set of parameters changed this range lol, but a range of 50%-100% works fine for me. If yours is going down to 0% throttle, double check you use the same numbers as he did. You can check what range your throttle cut is using by paging over on the main Home Screen (at least for me on a Radiomaster Zorro) and moving your throttle up and down while cutting at different levels

Thank you for your videos they are super easy to follow and get things working with your instruction. I am new to fpv and appreciate it. Thanks again

@HalfChrome

9 ай бұрын

Thank you. Glad they helped

Thanks! This helped with getting sound on my switches!

@HalfChrome

9 ай бұрын

Glad to help

Damn dude! That throttle cut is awesome!

@HalfChrome

Жыл бұрын

Excellent

I got tripped up by your explanation at 10:37 saying to "press" when in fact it was actually a "long press" to get the menu up to insert after. This may not seem like a big deal to some. But as a complete newbie working through this the first time, I spent probably about an hour trying to figure this one small detail out. Other than this one small detail. Thank you very much for the video! I really appreciate you taking the time to post this. I did find it very helpful.

@xshoudenx

3 ай бұрын

My Zorro managed to lose its config and I had to search and stumbled on this video a second time. A year later, and a little bit wiser, the long press didn't trip me up and this video was super helpful to get my controller back to "normal" :)

great video. i dont see any playtrack for throttle active but i hear the sound when its active .

keep it going

My arm is on the right side also more throttle control during a perch

Perfect!!! Exactly what I needed after I lost all my settings. Thanks!!

@HalfChrome

2 жыл бұрын

Glad to help

I like that radio alot

@HalfChrome

2 жыл бұрын

It’s a good one

Excellent Tutorial Video Jack, and I Saved It. Way Over My Understanding, Because I'm Not Into FPV Yet. Thank You.

Hey!, nice video, why didn't you add the same switch to the second mix in throttle cut

Excellent video! I setup the way you showed however in Betaflight my yaw is not working and the drone keeps spinning. Do you know why this happens?

On the type, I have TBs tracer external tx, on your 3:02 video, what should I put on mine “under type”

So question.. I got a new heli (OmpHobby M1evo) and this Radiomaster Zorro and I can't seem to figure out how to set aux switches. What I mean is, if we're talking FPV drones, we use Betaflight and under the "modes" tab, we can customize which "AUX" switch is say "arm-disarm" is and flight modes like "stability-acro." M1evo's Flight Controller can't connect to Betaflight, so how?? For example, i renamed channel 5 under the "mixes" tab to "hold," which doesn't really do much, because that's not telling the Heli's Flight controller that I want that channel to be Throttle Hold, or Idle UP, or whatever I want it to be.. Anyone know? ?

Great video. Do you think you could assign one of the push buttons as a momentary switch.

@HalfChrome

2 жыл бұрын

Probably. Haven’t tried.

Great stuff thank you dude! Just you saying it comes with scripts already on the sd... just helped me to actually understand😂 And the naming of the quad as just the receivers.... Simply a great idea🫡

@HalfChrome

6 ай бұрын

Thanks for the kind words

A bought the Radiomaster Zorro and initially I was having g trouble binding. Then once I got several of my drones binded, I realized that the sticks and other functions were backwards (inverted). Even in the simulator the sticks are all out of sink. Can you help?

Hello !! how to activate the switches? On betaflight they are not recognized thanks for the answer !

in the Folder "Play Track" i find no armed or disarmed... only Plane things...?

How do you select which switches will announce position?

do you know if the radiomaster zorro multiprotocol version has the Lua script already installed so I can use mu crossfire nano module

Nice video! Do you have any rattling noise when moving the radio? like someting is loose inside

@HalfChrome

2 жыл бұрын

Nope

After updating EdgeTX firmware on my Zorro, my throttle range went from 0 -> 100 to -100 -> 100. Does anybody know how I can change it back? I want to fly planes. Thanks!

Great video.. thank you... Is it possible to set one of the momentary buttons (or another one) to use RX_SET in Betaflight so that when you press it the built in beeper sounds on the quad... for when I lose it :)

@HalfChrome

2 жыл бұрын

I use it with the beeper command to make the ESC beep. Why would you want to use rx_set?

@GFW229

2 жыл бұрын

@@HalfChrome I am new to FPV just built my first one. I saw it when looking at BetaFlight and thought that was the way to go.. but open to better advice.. is that just configured on the Zorro?

I just got a radiomaster zorro 4in1 with TBS crossfire nano external module. I just bought the geprc rocket plus tbs crossfire edition as well. I updated the external module, then paired it with reciever on drone. Flashing blue light (means update now going to drone module) then now solid green on drone and remote. I know remote is paired because it says telemetry lost if drone is powered off. Now, I have solid green lights on both drone and remote external module. Both are paired. But when trying to get stick feedback on betaflight or receiver feedback at all, nothing. I move drone around with my hand on 3D model betaflight first page, drone moves. But nothing on reciever tab. I tried serial uart, crsf module. I tried disabling abc filter on zorro remote settings (tells you to do that on betaflight settings). I need help please. Its got to be something in betaflight is wrong settings wise. I looked up youtube videos for days. Can never find a tbs crossfire setup on zorro, only elrs. Thank you in advance!

@HalfChrome

Жыл бұрын

It could be wired incorrectly. Make sure rx goes to tx and Tx goes to rx

Can you make the modes and the switch changes on the radio master Zorro in beta flight instead of doing it on the controller itself like other controllers too?

@HalfChrome

2 жыл бұрын

Unfortunately no

Now I am totally confused... Can't you set all these different modes in Betaflight instead? Does this mean you set modes (e.g. arm, acro, etc) in either the zorro OR the the drone/betaflight? Is there an advantage to one over the other (although I have been using betaflight and prefer my computer to the zorrow buttons & scroll)?

@HalfChrome

Жыл бұрын

You set up the zorro first. You need to tell it what switch is aux 1, 2 etc. then you set up betaflight and tell it what aux 1, 2 etc do

It’s a decent video but I wish you were telling us what page you were on because I’m new to the radio master Zorro , and I would like to know what page you’re on when you’re making your settings so we can tell where you’re at in the screen because we can’t see what you’re showing us we can hear you saying what you’re doing but I can’t see what pager your on an what functions you’re clicking on because the screen is not clear enough,

This is the most standard way you configure any opentx/edgetx controller. What is so "particular" / "special" about your config again?

@HalfChrome

Жыл бұрын

Nothing special here. Just a tutorial. Is a throttle cut really the “most standard”?

I know this is a little old, just I just got my Zorro a couple of days ago, and I’ve got all my voices on switches, but the one I CAN NOT find is Turtle Mode, do you know which function it is by chance?

@FATSNAIL-FPV

2 жыл бұрын

Set max angle in BF to 180. Now go back to modes/switches and it should be there. Maybe under a different name even.. Crash recovery

I've problem with aux 5 & etc. That's not active when i test on betaflight. Can you help?

@HalfChrome

Жыл бұрын

Is your receiver connected?

@IBHobbies

Жыл бұрын

@@HalfChrome hehe sorry i figured it out. that problem has been solved. I just rebind a transmitter with rx. Thanks sir 👍

The light is off it's hard to see

First air2 s army out

Arm switch and throttle dial on the same side? I move those dials alot without noticing, and wondered how this worked out for you... Also I have my arm and pre arm on the left, and turtle mode on the right (where you have ARM). Why does the arm switch need to be on the right for ELRS?

@HalfChrome

2 жыл бұрын

It doesn’t matter the side. It just need to be aux 1.

@FATSNAIL-FPV

2 жыл бұрын

@@HalfChrome aux 1 in betaflight? Weird because I thought that be a specific switch on the controller.

@HalfChrome

2 жыл бұрын

You can set aux 1 to be any switch you want. I prefer right side but that’s just me.

hey man i just got my elrs zorro and one thing i am struggling with is when changing internal rf to multi it wont let me my only option is crsf

@HalfChrome

Жыл бұрын

Because it doesn’t switch between internally. It’s either ELRS or MULTI

@timmyhanstine9508

Жыл бұрын

@@HalfChrome so do I need a module to bind or do I just need to be smarter

@HalfChrome

Жыл бұрын

It depends on what you are trying to bind to. Get either an ELRS quad or receiver and you are good to go.

@timmyhanstine9508

Жыл бұрын

@@HalfChrome I have a elrs mobula 7

@HalfChrome

Жыл бұрын

It will bind. No module needed.

Went to alpine valley yesterday check out my flight

Thx for reminding me why I only fly DJI at this point.. lol. Jack. Come on man .... Why is this crap so many steps.. and so confusing. Grrrrrr. Btw I have built and set up many quads but it just became to much. Lol. Maybe I'm just getting old? Anyways💙💙💙💙👍👍👍👍 thank you for the help... 👍👍 If I ever do go back. Lol Mikey

@HalfChrome

2 жыл бұрын

It is a lot.

@PhillyDroneLife

2 жыл бұрын

@@HalfChrome yes sir. It is worth it.. once your all set up! 👍👍DJI FPV drone has really spoiled me . Lol

@HalfChrome

2 жыл бұрын

It is nice. Turn it on and fly

Only 32 likes after 6 days? Really underrated video, helped me a lot. Thanks! Btw, i noticed that on the SD card, there are more sound folders (with JB for example) but they are not selectable in the Special functions menu. Do you know how to make those selectable?

@HalfChrome

2 жыл бұрын

Thank you. I’m not certain. If I figure it out I’ll post it

Once you got to the 15 minute mark you lost me. you said you just knew what yours was and started typing. Throttle trick is cool but uh.... can't get the rest of it set up.

At 3:15 I have a crossfire nano. Am I suppose to do anything with internal RF ? Or leave it blank ?